0
登录后你可以
  • 下载海量资料
  • 学习在线课程
  • 观看技术视频
  • 写文章/发帖/加入社区
创作中心
发布
  • 发文章

  • 发资料

  • 发帖

  • 提问

  • 发视频

创作活动
BCM3517_06

BCM3517_06

  • 厂商:

    BOARDCOM

  • 封装:

  • 描述:

    BCM3517_06 - ATSC/VSB DIGITAL CABLE READY DTV RECEIVER - Broadcom Corporation.

  • 数据手册
  • 价格&库存
BCM3517_06 数据手册
BCM3517 ® ATSC/VSB DIGITAL CABLE READY DTV RECEIVER FEATURES • Integrated VSB/QAM QAMLink® Receiver • 12-bit A/D converter with internal AGC amplifier • Full equalizer architecture spans up to –35 to 49 µs delays • Direct IF sampled architecture reduces system cost • Single IF signal path for QAM/VSB to reduce system costs • ITU-T J.83 Annex A/B/C FEC modes • MPEG-2 transport output (serial/parallel) • All-digital clock and carrier recovery • Integrated PLLs to minimize external components • All acquisition times typically less than 50 ms • QPSK Out-of-Band Receiver • 100–200-MHz receiver LO with input AGC and 6-bit A/D • Variable symbol rate QPSK receiver • Digital demodulator, Nyquist filters, tracking loops, and four-tap adaptive equalizer • DVS-167 (Davic™)/DVS-178 (DigiCipherII™) FEC decoder • Integrated Acquisition Controller SUMMARY OF BENEFITS • Complete DTV single chip receiver solution • FCC VSB and Digital Cable Ready • Superior performance under both static and dynamic multipath channel conditions • Direct interface to CMOS and discrete DTV tuners • Reduces system costs through direct IF sampling • Single IF path for QAM/VSB simplifies board design • Smart antenna support • Automatic NTSC co-channel interference and RFI rejection filters • Integrated de-interleaver RAM for VSB FEC, and QAM for modes up to J=4 reduces system costs • BSC master to control peripherals • EIA/CEA-909 Antenna Interface • 144-pin LQFP Package Digital Cable Ready DTV System Solution Cable ATSC BCM3431 LNA BCM3418 Tuner MPEG Transport Serial/Parallel BCM3517 Out-of-Band VSB/QAM OOB/CableCard™ Out-of-band Transport EIA/CEA-909 Smart Antenna Interface OVERVIEW BSC/SPI Host Interface BSC/SPI Slave Interface HAB Acquisition Processor Internal Bus To All Blocks Master PLL 54-MHz 3rd Overtone Crystal Interrupt Inband Tuner Inband AGT Inband AGI Inband AFT Inband AFE PGA 12-bit A/D AGC Control ATSC 8/16 VSB Advanced Receiver ATSC FEC Output Interface MPEG Transport 16-1024 QAM Advanced Receiver ITU-T J.83 Annex A/B/C FEC OOB Tuner OOB AGC OOB VCO OOB AFE PGA 6-bit A/D AGC Control VCO OOB QPSK Receiver DVS-167 FEC DVS-167 FEC OOB Output Interface OOB Transport for CableCard/ POD BSC Master Interface GPIO/GPO Interface EIA/CEA-909 Interface JTAG Interface Tuner/Peripheral Control GPIO GPO Antenna Control JTAG Controller BCM3517 Block Diagram The BCM3517 is an ATSC/VSB Digital Cable Ready DTV receiver that contains a digital receiver that is compatible with both North American digital cable television and digital terrestrial broadcast television standards. This receiver is capable of receiving all standard-definition and high-definition digital formats (SDTV/HDTV). An out-of-band QPSK receiver is also contained to meet the needs of the CableCARD specification. The BCM3517’s digital receiver accepts an analog signal centered at the standard television IF frequencies, and amplifies and digitizes this signal with an integrated programmable gain amplifier and 12-bit A/D converter. The output of the A/D is sent to the receiver and demodulator. The digital receiver consists of a QAM demodulator and a VSB demodulator. Each demodulator contains adaptive filters that remove multipath propagation effects, NTSC co-channel interference, and RFI interference. The output of the VSB demodulator goes to an ATSC A/53 coding forward error corrector (FEC), with integrated trellis and ReedSolomon decoder. The output of the QAM demodulator goes to an ITUT J.83 Annex A/B/C coding FEC. The output of either QAM or VSB FEC is delivered in either parallel or serial MPEG-2 transport format. All gain, clock, and carrier, acquisition, and tracking loops are integrated on-chip as are the necessary phase-locked loops, referenced to a single external crystal. Chip configuration, channel acquisition, and performance monitoring functions are conducted by the on-chip acquisition processor using Broadcom-provided software. Broadcom®, the pulse logo, QAMLink®, Connecting everything®, and the Connecting everything logo are among the trademarks of Broadcom Corporation and/or its affiliates in the United States, certain other countries and/or the EU. Any other trademarks or trade names mentioned are the property of their respective owners. ® BROADCOM CORPORATION 16215 Alton Parkway, P.O. Box 57013 Irvine, California 92619-7013 © 2006 by BROADCOM CORPORATION. All rights reserved. 3517-PB03-R 10/23/06 Phone: 949-450-8700 Fax: 949-450-8710 E-mail: info@broadcom.com Web: www.broadcom.com
BCM3517_06 价格&库存

很抱歉,暂时无法提供与“BCM3517_06”相匹配的价格&库存,您可以联系我们找货

免费人工找货