BCM430X

BCM5365/BCM5365P ® SENTRY 5 PRODUCT LINE: BCM5365/BCM5365P SECURED SWITCH PROCESSORS FEATURES • The most highly integrated access security processors • 5-port 10/100 Ethernet switch with integrated PHY (TX/FX) • IEEE 802.1Q (VLAN) support; IEEE 802.1P (4 Priority Queues - CoS, QoS), DiffServ, ToS support; IEEE 802.1D (Spanning Tree) support • 802.1X protocols, IP multicast, IGMP snooping for video streaming applications, broadcast suppression, and hosting of multiple subnets • 128-KB on-chip packet buffer • Complete on-chip IPSec processing • Supports AES, DES, 3DES, HMAC-SHA1, HMAC-MD5, SHA-1, MD5 • 75-Mbps AES/3DES/HMAC-SHA1 • Single-pass encryption and authentication • General purpose 200-MHz MIPS32™ Processor· • 8 KB of instruction cache, 4 KB of data cache • Supports Linux®, and VxWorks® operating systems SUMMARY OF BENEFITS • System-on-a-chip solution offers optimal price/performance ratio and form factor, low power dissipation, and fastest time to market • Integration of managed five-port Fast Ethernet switch • Integration of MIPS32 CPU with silicon-proven IPSec processor facilitates complete packet processing in one pass for multiple policy-based packet routing and/or packet transformations (firewall, NAT, VPN, QoS) • Enables advanced application development with industrystandard operating systems/platforms/tools • Widely proliferated high-performance MIPS32 CPU enables advanced application development with industry-standard operating systems/platforms/tools • Extensive application software offered • IPSec (VPN), PPTP (passthrough), PPPoE client • NAT, filtering (IP, TCP), dynamic firewall, DMZ • Ethernet routing, static routing, DHCP server/client • Compatible with other Broadcom devices, enabling optimal system-level form factor, costs, and power dissipation • BCM5365P supports PCI 2.2, 32-bit/33-MHz host/slave interface • Supports four additional PCI devices in host mode • Extensive interface flexibility • Interface to flash memory (up to 32 MB) • Interface to SDRAM/DDRAM (up to 512 MB, 100 MHz) • GPIO, USB, UART interface • JTAG/EJTAG support • 400-pin PBGA package • Low power, 1.8V core, 3.3V I/O operation • Linux Open Source application software support • Third-party software support BCM5365/5365P-Based System Applications BCM5365-Based Wired Home Router SDRAM(32MB) BCM5365P-Based Wireless Router SDRAM (Up to 512 MB) FLASH (Up to 64 MB) TX/RX Wireless MAC PCI FLASH (2 MB) Clock (25 MHz) BCM2050 BCM430X BCM5365 BCM5365 BCM5365P BCM5365 Clock (25 MHz) Magnetics Magnetics Magnetics Magnetics RJ-45 RJ-45 RJ-45 RJ-45 Magnetics Magnetics Magnetics Magnetics RJ-45 RJ-45 RJ-45 RJ-45 Magnetics RJ-45 Magnetics RJ-45 DMZ 4-Port 10/100 LAN 10/100 WAN 4-Port 10/100 LAN 10/100 WAN OVERVIEW SDRAM I/F GPIO On-Chip Bus USB UART FLASH I/F 8-KB I-CACHE 4-KB D-CACHE On-Chip Bus On-Chip Bus PCI 2.2 Host (32-Bit/33-MHz) 200-MHz MIPS32 Core MMU VPN Processor Symmetric Key Engine 75 Mbps On-Chip Bus Ethernet MAC/MII Ethernet Switch Controller 4-Port 10/100 LAN PHY 10/100 WAN PHY 128-KB Packet Buffer Note: PCI Interface Supported in 5365P Only Broadcom's BCM5365 and BCM5365P, two System-On-Chips, are the most highly integrated access secure switch processor there are. The BCM5365/BCM5365P a lso features an on-chip, five-port 10/100 Ethernet switch with management features. This secured switch processor also offers extensive processor and interface integration featuring an integrated 200-MHz MIPS32™ core, UART, flash and SDRAM/DDRAM interfaces. The BCM5365P also supports a PCI interface. The BCM5365/BCM5365P (via dedicated cores) supports a wide range of cryptographic algorithms: AES (up to 256-bit CTR and CBC modes), DES, 3DES (CBC), HMAC-SHA1, HMAC-MD5, SHA1 and MD5. Both the devices support IPSec encryption and authentication in a single pass. The integrated 200-MHz MIPS32™ core of the BCM5365/BCM5365P has a 2-way set-associative 8-KB instruction cache and a 4-KB data cache The CPU includes the MMU, which enables support for various RTOS. The BCM5365/BCM5365P also supports interfaces that enable systemlevel cost savings, a better form factor, and lower power dissipation. The BCM5365/BCM5365P supports up to 512 MB of SDRAM/DDRAM and 64 MB of flash memory. The BCM5365P also supports the PCI version 2.2, 32-bit/33-MHz host interface, allowing enumeration of four external PCI peripherals as a way to extend system functionality. The UART enables a glueless interface to serial devices such as modems. Broadcom provides its proven IPSec API and drivers for integration with third-party application software. Broadcom also offers application software to build complete system applications. Application software support includes functions such as firewall (dynamic firewall, DMZ hosting, filtering-IP/TCP, NAT/PAT), VPN (IKE engines, IPSec drivers an d API, PPTP-passthrough , PPPo E client-PAP and CHAP authentication), QoS/CoS/ToS (static and dynamic Ethernet routing, VLAN tagging), and many other features. A single BCM5365/BCM5365P based platform is easy to reuse for other types of access to market segment equipment ranging in throughput performance from T1/E1 to 100 Mbps. This equipment includes wireless and wired home/residential and SOHO firewall and VPN appliances, wireless access points, and many types of customer premises equipment (CPE) devices. Broadcom®, the pulse logo, and Connecting everything® are trademarks of Broadcom Corporation and/ or its subsidiaries in the United States and certain other countries. All other trademarks mentioned are the property of their respective owners. ® BROADCOM CORPORATION 16215 Alton Parkway, P.O. Box 57013 Irvine, California 92619-7013 © 2004 by BROADCOM CORPORATION. All rights reserved. 5365_5365P-PB01-R 04/01/04 Phone: 949-450-8700 Fax: 949-450-8710 E-mail: info@broadcom.com Web: www.broadcom.com