BPW-8410
80W 48V DC-DC Open Frame Power Supply Input Range: 36~72VDC
14.14
0.55
Industrial Power Supply
E 0V
TRANSFORMER
0.8
6.78
24V
15.24 14.44
1.5
3.3 3.8
3.1
0.8
6.78
0.4
8.38
DC-DC
1.5 6.85 1.4 0.765
screw System chassis 0.25
3.87
Use #6-32 screw Protrusion limits 2.5mm x4
Features
*Input Voltage: 36~72VDC *Input Current: 5A at 48VDC max. *Inrush Current: < 10A at 48VDC input from a cold start 25oC excluding EMI suppression capactiors *Load Range: With all other outputs within their accuracy ranges and all output at 60% rated load, the +5V output is between 4.95~5.05V. Max. load can not exceed 80W convection cooling and 100W forced air cooling *Ripple and Noise: Peak to peak ripple and noise for +5V is < 50mV, and < 100mV for the other outputs at rated load, nominal line *Line Regulation: < +/-1% for each output at rated load and +/-10% of input voltage variables *Load Regulation: < +/-1% for +5V, and < +/-5% for -12V, +12V, -5V while changing measured output load from +/-40% to 60% rated load and keeping other outputs at 60% rated load *Efficiency: > 70% at DC24V and rated load *Altitude: > 10,000 feet *Protection: Built-in over voltage protection circuit. Trip point of crowbar circuit is between 5.7~7V. Hiccup mode against short circuit or over load conditions auto recovery when fault conditions are removed *Temperature: 0~+50oC (operating); -40~+85oC (storage) *Connectors: DC Input: Terminal blocks DC Output: Molex 5273-12A *Dimensions: 15.24 x 8.38 x 3.8 cm with +/-0.8mm and +/-0.4mm tolerance between mounting holes
Safety Standards
*Safety: UL 1950 / CSA 22.2 No.234 / VDE EN60950 *EMI: FCC class B / EN55022 B *EMS: Level 3 of IEC-802, 803, 804
PIN 1~3 4~7 8~9 10 11 12 Output +5V GND +12V -12V -5V N/C
Output Min. Voltage Load +5V 0A +12V 0A -12V 0A -5V 0A
Rated Load 10A 2A 0.5A 0.5A
Max. Load 12A 3A -------
Tolerance +/-0.05V +/-0.6V +/-0.6V +/-0.75V
www.boser.com.tw
6.85
很抱歉,暂时无法提供与“BPW-8410”相匹配的价格&库存,您可以联系我们找货
免费人工找货