HS-6251
Socket 370 133MHz FSB Industrial Single Board Computer
‧Half Size‧All-in-One‧CRT/Panel‧133MHz FSB‧ ‧ATA/33/66/100‧LAN‧Audio‧ PC/104‧ ‧IrDA‧USB‧DOC‧WDT‧H/W Monitor‧ ‧PCI-ISA Bus Industrial Single Board Computer‧
Copyriight Diiscllaiimers Copyr ght D sc a mers
The accuracy of contents in this manual has passed thorough checking and review before publishing. BOSER Technology Co., Ltd., the manufacturer and publisher, is not liable for any infringements of patents or other rights resulting from its use. The
manufacturer will not be responsible for any direct, indirect, special, incidental or consequential damages arising from the use of this product or documentation, even if advised of the possibility of such damage(s). This manual is copyrighted and BOSER Technology Co., Ltd. reserves all documentation rights. Unauthorized reproduction, transmission, translation, and storage of any form and means (i.e., electronic, mechanical, photocopying,
recording) of this document, in whole or partly, is prohibited, unless granted permission by BOSER Technology Co., Ltd. BOSER Technology Co., Ltd. reserves the right to change or improve the contents of this document without due notice. BOSER Technology Co., Ltd.
assumes no responsibility for any errors or omissions that may appear in this manual, nor does it make any commitment to update the information contained herein.
Trademarks Trademarks
BOSER is a registered trademark of BOSER Technology Co., Ltd. ISB is a registered trademark of BOSER Technology Co., Ltd. Intel is a registered trademark of Intel Corporation. Award is a registered trademark of Award Software, Inc. AMI is a registered trademark of AMI Software, Inc. All other trademarks, products and or product names mentioned herein are mentioned for identification purposes only, and may be trademarks and/or registered trademarks of their respective companies or owners.
© Copyright 2005 BOSER Technology Co., Ltd. All Rights Reserved. Edition 1.2, August 11, 2005
Table of Contents
Chapter 1
1.1 1.2 1.3 2.1 2.2 3.1 3.2 3.3 3.4 3.5 3.6 3.7 3.8 3.9 3.10 3.11 3.12 3.13 3.14 3.15 3.16 3.17 3.18 3.19 3.20 3.21 3.22 3.23
General Description……………………..1
Major Features ............................................................. 2 Specifications .............................................................. 3 Board Dimensions....................................................... 4 Opening the Delivery Package ................................... 5 Inspection..................................................................... 5 Before Installation ....................................................... 7 Board Layout ............................................................... 8 Jumper List .................................................................. 9 Connector List ............................................................. 9 Configuring the CPU ................................................. 10 System Memory ......................................................... 10 DiskOnChip™ Address Setting ................................ 11 VGA Controller........................................................... 11 PCI E-IDE Drive Connector ....................................... 13 Floppy Disk Drive Connector ................................... 15 Serial Port Connectors.............................................. 16 Parallel Connector..................................................... 17 Ethernet Connector ................................................... 18 Audio Connector ....................................................... 18 IrDA Connector .......................................................... 19 USB Connector .......................................................... 19 CMOS Data Clear ....................................................... 20 Front Panel Connector.............................................. 20 Power and Fan Connectors...................................... 20 Keyboard Connectors ............................................... 21 PS/2 Mouse Connectors ........................................... 22 Watchdog Timer ........................................................ 22 PC/104 Connectors.................................................... 25
Chapter 2 ....Unpacking………………………………..5 Chapter 3 ... Hardware Installation…...………………7
Chapter 4 .... AMI BIOS Setup……………………….27
4.1 4.2 4.3 4.4 4.5 4.6 4.7 4.8 4.9 4.10 4.11 4.12 4.13 4.14 4.15 4.16 5.1 5.2 5.3 5.4 Starting Setup ............................................................ 27 Using Setup................................................................ 28 4.2.1 Getting Help ............................................................................................ 28 Main Menu .................................................................. 29 Standard CMOS Setup .............................................. 30 Advanced CMOS Setup............................................. 31 Advanced Chipset Setup .......................................... 32 Power Management Setup........................................ 33 PCI / Plug and Play Setup ......................................... 34 Peripheral Setup ........................................................ 35 Hardware Monitor Setup........................................... 36 Auto-Detect Hard Disks ............................................ 37 Change Supervisor/User Password ........................ 38 Auto Configuration with Optimal Settings.............. 39 Auto Configuration with Fail Safe Settings ............ 40 Save Settings and Exit .............................................. 41 Exit Without Saving................................................... 42 VIA 4 in 1 Driver ......................................................... 43 Audio Driver Installation ........................................... 48 VGA Driver Installation ............................................. 51 LAN Driver Installation.............................................. 65
Chapter 5 ....Software Utilities……………………….43
Safety Instructiions Safety Instruct ons
Integrated circuits on computer boards are sensitive to static electricity. To avoid damaging chips from electrostatic discharge, observe the following precautions:
Do not remove boards or integrated circuits from their anti-static packaging until you are ready to install them. Before handling a board or integrated circuit, touch an unpainted portion of the system unit chassis for a few seconds. This helps to discharge any static electricity on your body. Wear a wrist-grounding strap, available from most electronic component stores, when handling boards and components. Fasten the ALLIGATOR clip of the strap to the end of the shielded wire lead from a grounded object. Please wear and connect the strap before handle the HS-6251 to ensure harmlessly discharge any static electricity through the strap. Please use an anti-static pad when putting down any components or parts or tools outside the computer. You may also use an anti-static bag instead of the pad. Please inquire from your local supplier for additional assistance in finding the necessary anti-static gadgets.
NOTE:
DO NOT TOUCH THE BOARD OR ANY OTHER SENSITIVE COMPONENTS WITHOUT ALL NECESSARY ANTI-STATIC PROTECTION.
Chapter 1
General Description
The HS-6251 is a VIA VT8606 chipset-based board designed for PCI-ISA Bus Socket 370 Intel® CeleronTM (100MHz FSB/1GHz)/ (133MHz FSB/1GHz)/TualatinTM (100MHz CoppermineTM FSB/1.3GHz) and VIA C3 (133MHz FSB/1GHz) CPU. The combination of these features makes the HS-6251 an ideal all-in-one industrial single board computer. Additional features include an enhanced I/O with CRT/Panel, LAN, audio, and COM port interface. Its onboard ATA/33/66/100 connected to IDE drive interface architecture allows the HS-6251 to support data transfers of 33, 66 or 100MB/sec. for each IDE drive connection. Designed with the VIA VT8606 core logic chipset, the board supports all CeleronTM (100MHz FSB/1GHz)/CoppermineTM (133MHz FSB/1GHz)/TualatinTM (100MHz FSB/1.3GHz) and VIA C3 (133MHz FSB/1GHz) CPU. The display controller is VIA VT8606 supporting CRT/Panel displays with 1280 x 1024 resolution. For suitable plug into any size system with 8/16/32-bit ISA and/or PCI slots operation, the board’s advanced PCI-ISA bus add-on feature allows user to easily obtain both ISA's 16-bit and PCI's 32-bit full set signals from a half size PCI-ISA slot. System memory is also sufficient with the one DIMM socket that can support up to 512MB. 1
Additional onboard connectors include two advanced USB and IrDA ports providing faster data transmission, a DOS-compatible DiskOnChip™ socket with a maximum capacity of 288MB, and one external RJ-45 connector for 10/100 Base-TX Ethernet use. To ensure the reliability in an unmanned or standalone system, the Watchdog Timer (WDT) onboard HS-6251 is designed with pure hardware that does not need the arithmetical functions of a real-time clock chip. If any program causes unexpected halts to the system, the onboard Watchdog Timer (WDT) will automatically reset the CPU or generate an interrupt to resolve such condition.
1.1
Major Features
The HS-6251 comes with the following features:
Socket 370 for Intel® CeleronTM (100MHz FSB/1GHz)/CoppermineTM (133MHz FSB/1GHz)/TualatinTM (100MHz FSB/1.3GHz) and VIA C3 (133MHz FSB/1GHz) CPU Supports 66/100/133MHz FSB One DIMM socket with a max. capacity of 512MB VIA VT8606 system chipset VIA VT82C686B super I/O chipset VIA VT8606 CRT/Panel display controller RealTek RTL8100B or Intel® 82559 or Intel® 82551 10/100 Based LAN AC97 3D audio controller Fast PCI ATA/33/66/100 IDE controller Two COM, four USB connectors
2
PC/104 Bus connector DiskOnChip socket supporting memory sizes of up to 288MB Supports Hardware Monitor
1.2
Specifications
CPU: Socket 370 for Intel® CeleronTM (100MHz FSB/1GHz)/ CoppermineTM(133MHz FSB/1GHz)/TualatinTM (100MHz FSB/1.3GHz) and VIA C3 (133MHz FSB/1GHz) CPU Bus Interface: PCI-ISA Bus Memory: One DIMM socket with a max. capacity of 512MB Chipset: VIA VT8606 I/O Chipset: VIA VT82C686B VGA: VIA VT8606 integrated Savage 4 2D/3D/Video accelerator up to 1280 x 1024 resolution Panel Display: Supports TTL/LVDS Panel interface LAN: RealTek RTL8100B or Intel® 82559 or Intel® 82551 10/100 Based LAN Audio: AC97 3D audio controller IDE: Four IDE disk drives supporting ATA/33/66/100 and with transfer rates of up to 33/66/100MB/sec. Floppy: Support up to two floppy disk drives Parallel Port: One enhanced bi-directional parallel port supporting SPP/ECP/EPP Serial Port: 16C550 UART-compatible RS-232 x 2 serial ports with 16-byte FIFO PC/104: PC/104 connector for 16-bit ISA Bus IrDA: One TX/RX IrDA header USB: Four USB connectors Keyboard: PS/2 6pin Mini DIN or 5-pin connector Mouse: PS/2 6pin Mini DIN or 4-pin header DiskOnChip™： DiskOnChipTM socket supporting memory sizes of up to 288MB BIOS: AMI PnP Flash BIOS Watchdog Timer: Sets 1, 2, 10, 20, 110, 220 seconds activity trigger with Reset or NMI CMOS: Battery backup Maximum Power Consumption: +5V/7.5A (1GHz CPU), +12V/120mA Operating Temperature: 0~60°C Hardware Monitor: VIA VT82C686B Board Size: 18.6 x 12.2 cm
3
1.3
Board Dimensions
4
Chapter 2
Unpacking
2.1 Opening the Delivery Package
The HS-6251 is packed in an anti-static bag. The board has components that are easily damaged by static electricity. Do not remove the anti-static wrapping until proper precautions have been taken. Safety Instructions in front of this manual describe anti-static precautions and procedures.
2.2
Inspection
After unpacking the board, place it on a raised surface and carefully inspect the board for any damage that might have occurred during shipment. Ground the board and exercise extreme care to prevent damage to the board from static electricity. Integrated circuits will sometimes come out of their sockets during shipment. Examine all integrated circuits, particularly the BIOS, processor, memory modules, ROM-Disk, and keyboard controller chip to ensure that they are firmly seated. The HS-6251 delivery package contains the following items: HS-6251 Board x 1 ATA/100 IDE flat cable x 2 FDD flat cable x 1 Printer cable with bracket x 1 Two RS-232 COM Port cable with bracket x 1 8-pin USB split type cable with bracket x 1 MIC/Audio 8-pin cable + 2 phone jacks with bracket x 1 5-pin ATX power cable x 1 Utility CD Disk x 1 Jumper Bag x 1 User’s Manual
5
It is recommended that you keep all the parts of the delivery package intact and store them in a safe/dry place for any unforeseen event requiring the return shipment of the product. In case you discover any missing and/or damaged items from the list of items, please contact your dealer immediately.
6
Chapter 3
Hardware Installation
This chapter provides the information on how to install the hardware using the HS-6251. This chapter also contains information related to jumper settings of switch, watchdog timer, and the DiskOnChip™ address selection etc.
3.1
Before Installation
After confirming your package contents, you are now ready to install your hardware. The following are important reminders and steps to take before you begin with your installation process.
1. Make sure that all jumper settings match their default settings and CMOS setup correctly. Refer to the sections on this chapter for the default settings of each jumper. 2. Go through the connections of all external devices and make sure that they are installed properly and configured correctly within the CMOS setup. Refer to the sections on this chapter for the detailed information on the connectors. 3. Keep the manual and diskette in good condition for future reference and use.
7
3.2
Board Layout
NOTE:
JP8 only for use Intel 82559, if you want to use Intel 82559, please set JP8 short 1-2.
8
3.3
J9 JP1 JP2 JP3(1-4) JP3(5-10) JP4 JP6 JP8 JP27
Jumper List
Definition Setting Page
22 12 12 13 24 24 12 20 13 Clear CMOS: Normal Operation Short 1-2 Bus Clock Select: 133MHz FSB Open 1-2, 3-4 CPU Process Select: 0.18 Short DiskOnChip Address Select: D000 Short 1-2, 3-4 WDT Period Select: 1 sec. Short 5-6, 7-8, 9-10 WDT Active Type Select: Disabled Open CPU Process Select: 0.18 Open Intel 82559 Enabled/Disabled Select: Short 1-2 Enabled Panel Voltage Select: +3.3V Short 2-3
Jumper
3.4
Connector List
Definition
5-pin Keyboard Connector 5-pin ATX Power In Connector Primary/Secondary IDE Connector Parallel Connector Floppy Connector USB Connectors PC/104 Bus 64-pin/40-pin Connector COM1/COM2 Connector (5x2 header) RJ-45 Connector 4-pin Mouse Connector 15-pin CRT Connector PS/2 6-pin Mini DIN Mouse Connector COM1 Connector (DB9) PS/2 6-pin Mini DIN Keyboard Connector 50-pin Panel Connector LVDS Connector 168-pin DIMM Socket Fan Power In Connectors Front Panel Connector 2-pin ATX Power Switch IrDA Connector CD-ROM Analog Input Connector
Connector
CN1 CN2 CN4 / CN3 CN5 CN6 CN7/CN8 CN9 / CN10 CN11 / CN12 CN13 CN14 CN15 CN16 CN17 CN18 CN19 CN20 DM1 FN1/FN2 J1 J2 J8 J10
Page
23 22 15 19 17 21 27 18 20 24 13 24 18 23 13 13 12 22 22 22 21 20
. . . More on next page . . .
9
Connector
J11 JP5 U9
Definition
Line In Connector MIC In/Audio Out Connector DiskOnChip Socket
Page
20 20 13
3.5
Configuring the CPU
The HS-6251 provides all necessary by jumper setting in using Bus Clock frequency as the system bus clocking with JP1 and CPU type select with JP2 and JP6.
JP1: Bus Clock Select
Bus Clock
66MHz 100MHz 133MHz (default)
PINS 1-2
Short Open Open
PINS 3-4
Short Short Open
2 1 4 3
JP2, JP6: CPU Process Select
CPU Process
0.13 0.18 (default) 0.25
JP2
Short Short Open
JP6
Open Open Short
JP2 JP6
3.6
System Memory
The HS-6251 provides one DIMM socket. The maximum capacity of the onboard memory is 512MB.
10
3.7
DiskOnChip™ Address Setting
The DiskOnChip™ function allows the system to boot or operate without a FDD or a HDD. DiskOnChip™ modules may be formatted as drive C or A. With DiskOnChip™, user may also execute DOS commands such as FORMAT, SYS, COPY, XCOPY, DISCOPY and DISKCOMP etc. The U9 location onboard the HS-6251 is the DiskOnChip™ module socket. Jumper JP3 (1-4) assigns the address setting of the installed module. If you have additional memory devices in the system, please set both at different memory address mapping to avoid the mapping area conflicts.
JP3 (1-4): DiskOnChip™ Address Select
Address
D000 (default) D800
PINS 1-2 PINS 3-4
Short Open Short Short
2 1 4 3
3.8
VGA Controller
The HS-6251 deploys the VIA VT8606 Savage 4 CRT/Panel display controller that supports 2D/3D/Video accelerator with 1280 x 1024 resolution. NOTE: The Panel display support requires the use of an additional LCD convert card. Please contact your dealer for more information.
CN15: 15-pin CRT Connector (DB15)
PIN Description PIN Description
1 3 5 7 9 11 13 15 Red Blue GND GND VCC N/C HSYNC SCL 2 4 6 8 10 12 14 Green N/C GND GND GND SDATA VSYNC
6 1 11
5
10
15
11
The HS-6251 provides another 50-pin Panel and one 12-pin LVDS connections as following CN19 and CN20 pin information. NOTE: Please set the proper voltage of your panel using JP27 before proceeding on installing it. PIN
1 3 5 7 9 11 13 15 17 19 21 23 25 27 29 31 33 35 37 39 41 43 45 47 49
ENAVDD +12V GND GND PD1 PD3 PD5
CN19: 50-pin Panel Connector
Description
+12V GND VLCD ENAVEE PD0 PD2 PD4 PD6 PD8 PD10 PD12 PD14 PD16 PD18 PD20 PD22 PD24 SHFCLK DE GND PD26 PD28 PD30 PD32 PD34
PD11 PD13 PD15 PD17 PD19 PD7 PD9
PIN
2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 42 44 46 48 50
PD21 PD23 PD25
Description
+12V GND ENAVDD GND PD1 PD3 PD5 PD7 PD9 PD11 PD13 PD15 PD17 PD19 PD21 PD23 PD25 FLM LP ENPBLT PD27 PD29 PD31 PD33 PD35
ENPBLT PD27 PD29 PD31 PD33 PD35 50 49 PD34 FLM
2 1 +12V VLCD ENAVEE PD10 PD12 PD14 PD16 PD18 PD20 PD0 PD2 PD4 PD6 GND PD8 PD26 PD28 PD30 PD22 PD24 SHFCLK PD32 GND DE
12
LP
CN20: LVDS Connector
PIN Description PIN Description
1 3 5 7 9 11 VCC3 Y6 Y1 Y4 Y7 GND 2 4 6 8 10 12 VCC3 Y3 Y0 Y2 Y5 GND
VCC3 Y6 Y1 Y4 Y7 GND 11 12 1 2 VCC3 Y3 Y0 Y2 Y5 GND
JP27: Panel Voltage Select
PIN
1-2 2-3 (default)
Description
+5V +3.3V
1
3
3.9
PCI E-IDE Drive Connector
CN4 and CN3 are standard 40-pin connectors daisy-chain driver connector serves the PCI E-IDE drive provisions onboard the HS-6251. A maximum of four IDE drives can connect to CN4 and CN3.
CN4: Primary IDE Connector
PIN
1 3 5 7 9 11 13 15 17 19 21 23 25 27 29 31 33
Description
RESET PDATA7 PDATA6 PDATA5 PDATA4 PDATA3 PDATA2 PDATA1 PDATA0 GND PDREQ PIOW# PIOR# PIORDY PPDACK# Interrupt PDA1#
PIN
2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34
Description
GND PDATA8 PDATA9 PDATA10 PDATA11 PDATA12 PDATA13 PDATA14 PDATA15 N/C GND GND GND 470Ω to GND GND N/C PATA66
. . . More on next page . . . 13
PIN
35 37 39
Description
PDA0# PDCS1# HDD Active P
PDATA10 PDATA11 PDATA12 PDATA13 PDATA14 PDATA15 PDATA8 PDATA9
PIN
36 38 40
470Ω to GND
Description
PDA2# RPCS3# GND
PDCS3# PDCS1# PATA66
PDA2#
GND
GND ’
GND
GND
GND
2 1 PIOW# PIOR# PDDACK# PDA1# PDATA7 PDATA6 PDATA5 PDATA4 PDATA3 PDATA2 PDATA1 PDATA0 PDREQ PIORDY Interrupt PDA0# Reset GND HDD Active P
GND 40 39
N/C
CN3: Secondary IDE Connector
PIN
1 3 5 7 9 11 13 15 17 19 21 23 25 27 29 31 33 35 37 39
Description
RESET SDATA7 SDATA6 SDATA5 SDATA4 SDATA3 SDATA2 SDATA1 SDATA0 GND SDREQ SIOW# SIOR# SIORDY SDDACK# Interrupt SDA1# SDA0# SDCS1# HDD Active S
PIN
2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40
N/C
Description
GND SDATA8 SDATA9 SDATA10 SDATA11 SDATA12 SDATA13 SDATA14 SDATA15 N/C GND GND GND 470Ω to GND GND N/C SATA66 SDA2# SDCS3# GND
14
470Ω to GND
SDATA10
SDATA11
SDATA12
SDATA13
SDATA14
SDATA15
SDATA8
SDATA9
SDCS3# SDCS1#
SATA66
SDA2#
GND
GND ’
GND
GND
GND
2 1 SIOW# SIOR# SDDACK# SDA1# SDATA7 SDATA6 SDATA5 SDATA4 SDATA3 SDATA2 SDATA1 SDATA0 SDREQ SIORDY Interrupt SDA0# Reset GND HDD Active S
GND 40 39
N/C
3.10 Floppy Disk Drive Connector
The HS-6251 uses a standard 34-pin header connector, CN6, for floppy disk drive connection. A total of two FDD drives may be connected to CN6 at any given time.
CN6: Floppy Connector
PIN
1 3 5 7 9 11 13 15 17 19 21 23 25 27 29 31 33
Description
GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND
PIN
2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34
N/C
Description
DRVDEN0 N/C DRVDEN1 INDEX# MTR0# DS1# DS0# MTR1# DIR# STEP# WDATA# WGATE# TRAK00# WRTPRT# RDATA# HDSEL# DSKCHG#
15
WRTPRT#
DSKCHG# 34 33 GND
2 DSR 4 RTX 6 CTX 8 RI 10 N/C
DRVDEN0
DRVDEN1
TRAK00#
WGATE#
WDATA# ’
RDATA# GND
9 6
2 1 GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND
5 7 9
3.11 Serial Port Connectors
The HS-6251 offers two NS16C550 compatible UARTs with Read/Receive 16byte FIFO serial ports with two internal 5x2 connectors and one DB9.
CN11, CN12: COM1/COM2 (5x2 Header)
PIN Description PIN Description
1 3 5 7 9 DCD RXD TXD DTR GND 2 4 6 8 10 DSR RTX CTX RI N/C
DCD 1 RXD 3 TXD DTR GND
CN17: COM1 (DB9 only for HS-6251P)
PIN
1 2 3 4 5 6 7 8 9
Description
DCD1 RXD1 TXD1 DTR1 GND DSR1 RTX1 CTX1 RI1
5
1
16
HDSEL#
INDEX#
MTR0#
MTR1#
STEP#
DS1#
DS0#
DIR#
N/C
3.12 Parallel Connector
CN5 is a standard 26-pin flat cable connector deigned to accommodate parallel port connection onboard the HS-6251.
CN5: Parallel Connector
PIN
1 2 3 4 5 6 7 8 9 10 11 12 13
Description
Strobe DATA0 DATA1 DATA2 DATA3 DATA4 DATA5 DATA6 DATA7 Acknowledge Busy Paper Empty Printer Select
Printer Select LN# Auto Form Feed
PIN
14 15 16 17 18 19 20 21 22 23 24 25 26
Description
Auto Form Feed ERROR# Initialize Printer Select LN# GND GND GND GND GND GND GND GND GND
ERROR#
Initialize
GND
GND
GND
GND
GND
GND
GND
GND Paper Empty
GND 26 13 Printer Select
14 1 Acknowledge DATA0 DATA1 DATA2 DATA3 DATA4 DATA5 DATA6 DATA7 Strobe Busy
17
3.13 Ethernet Connector
The HS-6251 provides one external RJ-45 10/100 Base-TX LAN interface connector. Please refer to the following detail of pin information.
CN13: RJ-45 Connector
PIN
1 2 3 4 5 6 7 8
Description
TX+ TXRX+ 75Ω to GND 75Ω to GND RX75Ω to GND 75Ω to GND
1 2 TX75Ω to GND RX75Ω to GND 8 7 TX+ RX+ 75Ω to GND 75Ω to GND
If you want to use Intel 82559, please set JP8 to short 1-2, to enable the chipset work.
JP8: Intel 82559 Enabled/Disabled Select
Options
Enabled (default) Disabled
Setting
Short 1-2 Short 2-3
1 2 3
3.14 Audio Connector
The HS-6251 has an onboard AC97 3D audio interface. The following tables list the pin assignments of the CD-ROM Analog Input, the Line In and the MIC In/Audio Out connectors.
J10: CD-ROM Analog Input Connector
PIN
1 2 3 4
Description
CD IN_L GND GND CD IN_R
1 2 3 4
18
J11: Line In Connector
PIN
1 2 3 4
Description
LINE_R GND GND LINE_L
1
2
3
4
LINE_R
JP5: MIC In/Audio Out Connector
OUT_R GND
OUT_L
MIC IN
1 3 5 7
OUT_L GND MIC IN GND
2 4 6 8
OUT_R GND N/C GND
2 1 GND GND
GND 8 7
3.15 IrDA Connector
J8 is a 5-pin internal IR communication connector for connection of an IrDA device.
J8: IrDA Connector
PIN
1 2 3 4 5
Description
VCC N/C IRRX GND IRTX
1
2
3
4
5
GND
VCC
N/C
3.16 USB Connector
The HS-6251 provides two 8-pin connectors for USB0 & USB1 ports at locations CN7 and CN8.
CN7, CN8: USB Connectors
PIN Description PIN
1 3 5 7 VCC BD0-/BD2BD0+/BD2+ GND 2 4 6 8
Description
VCC BD1-/BD3BD1+/BD3+ GND
2 1 8 7
IRRX
IRTX
N/C
PIN Description PIN Description
LINE_L
GND
GND
19
3.17 CMOS Data Clear
The HS-6251 provides a setting for the selection of the Clear CMOS by J9 setting as following:
J9: Clear CMOS
Options
Normal Operation (default) Clear CMOS
Settings
Short 1-2 Short 2-3
1 2 3
IMPORTANT: Before you turn on the power of your system, please set J9 to Short 1-2 for normal operation.
3.18 Front Panel Connector
The front panel connector, J1, provides a multi port connection to various functions/indicators like reset button, EXT SMI switch, speaker, and HDD LED.
J1: Front Panel Connector
PIN Description PIN
1 3 5 7 RST_SW EXT SMI SPK HDD LED 2 4 6 8
Description
GND GND VCC With 330Ω pull VCC
2 1 8 7
3.19 Power and Fan Connectors
HS-6251 provides a 5-pin ATX Power Connector at CN2, and two FAN connectors at locations FN1 and FN2.
J2: 2-pin ATX Power Switch
PIN
1 2
Description
PW_BN GND
PW_BN GND
2
1
20
CN2: 5-pin ATX Power In Connector
PIN
1 2 3 4 5
Description
VCC 5VSB +12V PS_ON GND
1 5VSB +12V VCC PS_ON GND 5
FN1, FN2: FAN Power In Connector
PIN
1 2 3
Description
FAN Speed +12V GND
3.20 Keyboard Connectors
The HS-6251 offers two possibilities for keyboard connections. The connections are via CN18 for an external PS/2 type keyboard or via CN1 for an internal 5-pin cable converter to an AT keyboard.
CN1: 5-pin Keyboard Connector
PIN
1 2 3 4 5
Description
Keyboard Clock Keyboard Data N/C GND 5VSB
1
2
3
1
4
3
5
N/C
Keyboard Data
Keyboard Clock
GND
5VSB
21
CN18: PS/2 6-pin Mini DIN Keyboard Connector
PIN
1 2 3 4 5 6
Description
Keyboard Data N/C GND 5VSB Keyboard Clock N/C
Keyboard Clock
5
3 GND 1 Data 2 N/C 4 5VSB
Keyboard
6
N/C
3.21 PS/2 Mouse Connectors
The HS-6251 provides an external PS/2 mouse connector at CN16 and an additional 4-pin connector at CN14 for an AT mouse.
CN16: PS/2 6-pin Mini Din Mouse Connector
PIN Description
1 2 3 4 5 6 Mouse Data N/C GND 5VSB Mouse Clock N/C
Mouse Clock
5
3 GND 1 Data 2 N/C 4 5VSB
Mouse
6
N/C
CN14: 4-pin Mouse Connector
PIN Description
1 2 3 4 Mouse Clock Mouse Data 5VSB GND
Mouse Clock Mouse Data 5VSB GND
1 2 3 4
3.22 Watchdog Timer
There are three access cycles of Watch-Dog Timer as Enable, Refresh
and Disable. The Enable cycle proceeds via READ PORT 443H whereas the Disable cycle proceeds via READ PORT 045H. A continued Enable cycle after a first Enable cycle means Refresh.
22
Once the Enable cycle is active, a Refresh cycle is requested before the time-out period. This restarts counting of the WDT period. When the time counting goes over the period preset of WDT, it will assume that the program operation is abnormal. A System Reset signal to re-start or a NMI cycle to the CPU transpires when such error happens. Jumper JP4 is used to select the function of Watchdog Timer.
JP4: WDT Active Type Select
JP4
Short 1-2 Short 2-3 Open (default)
Description
Active NMI System Reset Disabled Watchdog Timer
1 2 3
JP3 (5-10): WDT Period Select
Period
1 sec (default) 2 sec 10 sec 20 sec 110 sec 220 sec
PINS 5-6 PINS 7-8 PINS 9-10
Short Open Short Open Short Open Short Short Open Open Short Short Short Short Short Short Open Open
6 8 10
5
7
9
NOTE: If you want to use WDT function, please Disabled ACPI in BIOS options. The Watchdog Timer is disabled after the system Power-On. It can be enabled via an Enable cycle and reading the control port (443H), or via a Refresh cycle and reading the control port (443H), or via a Disable cycle and reading the disable control port (045H). After an Enable cycle of WDT, user must immediately execute a Refresh cycle to WDT before its period setting comes to an end every 1, 2, 10, 20, 110 or 220 seconds. If the Refresh cycle does not activate before WDT period cycle, the onboard WDT architecture will issue a Reset or NMI cycle to the system. The Watchdog Timer controls three I/O ports.
443H 443H 045H I/O Read I/O Read I/O Read The Enable cycle The Refresh cycle The Disable cycle
23
The following sample program shows how to Enable, Disable and Refresh the Watchdog Timer：
WDT_EN_RF WDT_DIS WT_Enable EQU EQU PUSH PUSH MOV IN POP POP RET PUSH PUSH MOV IN POP POP RET PUSH PUSH MOV IN POP POP RET 0433H 0045H AX DX DX,WDT_EN_RF AL,DX DX AX ; keep AX DX ; enable the WDT ; get back AX, DX
WT_Refresh
AX DX DX,WDT_ET_R AL,DX DX AX
; keep AX, DX ; refresh the WDT ; get back AX, DX
WT_DISABLE
AX DX DX,WDT_DIS AL,DX DX AX
; disable the WDT ; get back AX, DX
24
3.23 PC/104 Connectors
The PC/104 expansion bus offers provisions to connect all types of PC/104 modules. With the PC/104 bus being known as the new generation of industrial embedded 16bit PC standard bus, thousands of PC/104 modules from multiple venders can be easily installed onboard. The detailed pin assignment of the PC/104 expansion bus connectors CN9 and CN10 are listed on the following tables: NOTE： The PC/104 connector allows direct plugging or stack-through piling of PC/104 modules without requiring the PC/104 mounting kit.
CN10: PC/104 Bus 40-pin Connector
Pin
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
Description
GND MEMCS16# IOSC16# IRQ10 IRQ11 IRQ12 IRQ15 IRQ14 DACK0# DRQ0# DACK5# DRQ5# DACK6# DRQ6# DACK7# DRQ7# VCC MASTER# GND GND
Pin
21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40
Description
GND SBHE# SA23 SA22 SA21 SA20 SA19 SA18 SA17 MEMR# MEMW# SD8 SD9 SD10 SD11 SD12 SD13 SD14 SD15 N/C
Connector diagram rotated 90 degrees clockwise from original position
1 21
20
40
25
CN9: PC/104 Bus 64-pin Connector
Pin
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32
Description
IOCHECK# SD7 SD6 SD5 SD4 SD3 SD2 SD1 SD0 IOCHRDY AEN SA19 SA18 SA17 SA16 SA15 SA14 SA13 SA12 SA11 SA10 SA9 SA8 SA7 SA6 SA5 SA4 SA3 SA2 SA1 SA0 GND
Pin
33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64
Description
GND RESETDRV VCC IRQ9 N/C DRQ2 -12V OWS# +12V GND SMEMW# SMEMR# IOW# IOR# DACK3# DRQ3# DACK1# DRQ1# REFRESH# SYSCLK IRQ7 SLPBTN IRQ5 IRQ4 IRQ3 DACK2# TC BALE +5V OSC GND GND
Connector diagram rotated 90 degrees clockwise from original position
1 33
32
64
26
Chapter 4
AMI BIOS Setup
The HS-6251 uses AMI BIOS for the system configuration. The AMI BIOS setup program is designed to provide the maximum flexibility in configuring the system by offering various options that could be selected for end-user requirements. This chapter is written to assist you in the proper usage of these features.
4.1
Starting Setup
The AMI BIOS is immediately activated when you first power on the computer. The BIOS reads the system information contained in the CMOS and begins the process of checking out the system and configuring it. When it finishes, the BIOS will seek an operating system on one of the disks and then launch and turn control over to the operating system. While the BIOS is in control, the Setup program can be activated in one of two ways:
1. By pressing immediately after switching the system on, or 2. By pressing the key when the following message appears briefly at the bottom of the screen during the POST (Power On Self Test).
Press DEL to enter SETUP. If the message disappears before you respond and you still wish to enter Setup, restart the system to try again by turning it OFF then ON or pressing the "RESET" button on the system case. You may also restart by simultaneously pressing , , and keys. If you do not press the keys at the correct time and the system does not boot, an error message will be displayed and you will again be asked to... PRESS F1 TO CONTINUE, DEL TO ENTER SETUP
27
4.2
Using Setup
In general, you use the arrow keys to highlight items, press to select, use the and keys to change entries, press for help and press to quit. The following table provides more detail about how to navigate in the Setup program using the keyboard.
↑ ↓ ← → Esc key Move to previous item Move to next item Move to the item in the left hand Move to the item in the right hand Main Menu -- Quit and not save changes into CMOS Status Page Setup Menu and Option Page Setup Menu -Exit current page and return to Main Menu Increase the numeric value or make changes Decrease the numeric value or make changes Increase the numeric value or make changes Decrease the numeric value or make changes Reserved Change color from total 16 colors. F2 to select color forward, (Shift) F2 to select color backward Calendar, only for Status Page Setup Menu Reserved Restore the previous CMOS value from CMOS, only for Option Page Setup Menu Load the default CMOS value from BIOS default table, only for Option Page Setup Menu Load the default Reserved Reserved Save all the CMOS changes, only for Main Menu
PgUp key PgDn key + key - key F1 key (Shift)F2 key F3 key F4 key F5 key F6 key F7 key F8 key F9 key F10 key
4.2.1 Getting Help
Press F1 to pop up a small help window that describes the appropriate keys to use and the possible selections for the highlighted item. To exit the Help Window press or the F1 key again.
28
4.3
Main Menu
Once you enter the AMI BIOS CMOS Setup Utility, the Main Menu will appear on the screen. The Main Menu allows you to select from several setup functions and two exit choices. Use the arrow keys to select among the items and press to enter the sub-menu.
AMIBIOS HIFLEX SETUP UTILITY – VERSION x.xx (C)2001 American Megatrends, Inc. All Rights Reserved Standard CMOS Setup Advanced CMOS Setup Advanced Chipset Setup Power Management Setup PCI / Plug and Play Setup Peripheral Setup Hardware Monitor Setup Auto-Detect Hard Disks Change User Password Change Supervisor Password Auto Configuration with Optimal Settings Auto Configuration with Fail Safe Settings Save Settings and Exit Exit Without Saving Standard CMOS setup for changing time, date, hard disk type, etc. ESC: Exit : Sel F2/F3: Color F10: Save & Exit
NOTE:
A brief description of the highlighted choice appears at the bottom of the screen.
29
4.4
Standard CMOS Setup
The Standard Setup is used for the basic hardware system configuration. The main function is for Data/Time and Floppy/Hard Disk Drive settings. Please refer to the following screen for the setup. When the IDE hard disk drive you are using is larger than 528MB, you must set the HDD mode to LBA mode. Please use the IDE Setup Utility in BIOS SETUP to install the HDD correctly.
AMIBIOS SETUP – STANDARD CMOS SETUP (C)2001 American Megatrends, Inc. All Rights Reserved Date (mm/dd/yyyy) : Thu Jan 03, 2002 Time (hh/mm/ss) : 19:04:12 Floppy Drive A: Floppy Drive B: Type Pri Master : Auto Pri Slave : Auto Sec Master : Auto Sec Slave : Auto 1.44MB, 3.5” Not Installed Size Cyln Base Memory : 0 KB Extd Memory : 0 MB
LBA Blk PIO 32Bit Head WPcom Sec Mode Mode Mode Mode
Boot Sector Virus Protection : Disabled Month: Jan - Dec Day: 01 - 30 Year: 1980 - 2099
ESC: Exit : Sel PgUp/PgDn: Modify F2/F3: Color
30
4.5
Advanced CMOS Setup
This section allows you to configure your system for the basic operation. You have the opportunity to select the system’s default speed, boot-up sequence, keyboard operation, shadowing and security.
AMIBIOS SETUP – STANDARD CMOS SETUP (C)2001 American Megatrends, Inc. All Rights Reserved Quick Boot Pri Master ARMD Emulated as Pri Slave ARMD Emulated as Sec Master ARMD Emulated as Sec Slave ARMD Emulated as USB ARMD Emulated as 1st Boot Device 2nd Boot Device 3rd Boot Device Try Other Boot Devices S.M.A.R.T. for Hard Disks BootUp Num-Lock Floppy Drive Swap Floppy Drive Seek PS/2 Mouse Support Primary Display Password Check Boot To OS/2 CPU Microcode Updation CPU Serial Number L1 Cache L2 Cache System BIOS Cacheable C000,32k Shadow C800,16k Shadow CC00,16k Shadow D000,16k Shadow D400,16k Shadow D800,16k Shadow DC00,16k Shadow Enabled Auto Auto Auto Auto Auto Floppy IDE-0 CD/DVD Yes Disabled On Disabled Disabled Enabled VGA/EGA Setup No Enabled Enabled Enabled Enabled Enabled Cache Disabled Disabled Disabled Disabled Disabled Disabled Available Options: Disabled Enabled
ESC:Exit :Sel PgUp/PgDn: Modify F2/F3:Color
31
4.6
Advanced Chipset Setup
This section allows you to configure the system based on the specific features of the installed chipset. This chipset manages bus speeds and the access to the system memory resources, such as DRAM and the external cache. It also coordinates the communications between the conventional ISA and PCI buses. It must be stated that these items should never be altered. The default settings have been chosen because they provide the best operating conditions for your system. You might consider and make any changes only if you discover that the data has been lost while using your system.
AMIBIOS SETUP – ADVANCED CHIPSET SETUP (C)2001 American Megatrends, Inc. All Rights Reserved ******** DRAM Timing ******** Configure SDRAM Timing by SPD DRAM Frequency SDRAM CAS# Latency DRAM Bank Interleave Memory Hole AGP Mode AGP Fast Write AGP Aperture Size AGP Master 1 W/S Write AGP Master 1 W/S Read Search for MDA Resources PCI Delay Transaction ISA Bus Clock USB Controller USB Device Legacy Support Port 64/60 Emulation ATX Power Supply Disabled 100MHz 3 Enabled Disabled 4x Disabled 64MB Disabled Disabled Yes Enabled PCI CLK/4 All USB Port All Device Disabled Disabled Available Options: Disabled Enabled
ESC:Exit :Sel PgUp/PgDn: Modify F2/F3:Color
32
4.7
Power Management Setup
The Power Management Setup allows user to configure the system for saving energy in a most effective way while operating in a manner consistent with his own style of computer use.
AMIBIOS SETUP – POWER MANAGEMENT SETUP (C)2001 American Megatrends, Inc. All Rights Reserved ACPI Aware O/S ACPI Standby State USB Device Wakeup From S3-S5 Re-Call VGA BIOS at S3 Resuming Power Management / APM Video Power Down Mode Hard Disk Power Down Mode Standby Time Out (Minute) Suspend Time Out (Minute) Throttle Slow Clock Ratio Display Activity IRQ3 IRQ4 IRQ5 IRQ7 IRQ9 IRQ10 IRQ11 IRQ12 IRQ13 IRQ14 IRQ15 System Thermal Thermal Active Temperature Thermal Slow Clock Ratio Power Button Function Restore on AC / Power Loss Resume On Ring Resume On LAN Resume On PME# Resume On KBC Wake-Up Key Wake-Up Password Resume On PS/2 Mouse Resume On RTC Alarm RTC Alarm Date RTC Alarm Hour RTC Alarm Minute RTC Alarm Second No S1/POS Disabled Enabled Enabled Disabled Disabled Disabled Disabled 50%~56.25% Ignore Monitor Monitor Ignore Monitor Ignore Ignore Ignore Ignore Ignore Monitor Ignore Disabled 65°C / 149°F 50%~56.25% On / Off Last State Disabled Disabled Disabled Disabled N/A N/A Disabled Disabled 15 12 30 30 Available Options: No Yes
ESC:Exit :Sel PgUp/PgDn: Modify F2/F3:Color
33
4.8
PCI / Plug and Play Setup
This section describes configuring the PCI bus system. PCI, or Personal Computer Interconnect, is a system that allows I/O devices to operate at speeds nearing the speed the CPU itself uses when communicating with its own special components. This section covers some very technical items and it is strongly recommended that only experienced users should make any changes to the default settings.
AMIBIOS SETUP – PCI / PLUG AND PLAY SETUP (C)2001 American Megatrends, Inc. All Rights Reserved Plug and Play Aware O/S Clear NVRAM OnChip VGA Frame Buffer Size PCI Latency Timer (PCI Clocks) Primary Graphics Adapter Boot Screen Select LCD Panel Type DMA Channel 0 PCI IDE Bus Master OffBoard PCI IDE Card Primary IRQ Secondary IRQ DMA Channel 1 DMA Channel 3 DMA Channel 5 DMA Channel 6 DMA Channel 7 IRQ3 IRQ4 IRQ5 IRQ7 IRQ9 IRQ10 IRQ11 IRQ14 IRQ15 No No 8MB 32 PCI Both CRT & LCD 0 PnP Disabled Auto Disabled Disabled PnP PnP PnP PnP PnP PCI/PnP PCI/PnP PCI/PnP PCI/PnP PCI/PnP PCI/PnP PCI/PnP PCI/PnP PCI/PnP Available Options: No Yes
ESC:Exit :Sel PgUp/PgDn: Modify F2/F3:Color
34
4.9
Peripheral Setup
The IDE hard drive controllers can support up to two separate hard drives. These drives have a master/slave relationship that is determined by the cabling configuration used to attach them to the controller. Your system supports two IDE controllers--a primary and a secondary--so you can install up to four separate hard disks. PIO means Programmed Input/Output. Rather than having the BIOS issue a series of commands to affect the transfer to or from the disk drive, PIO allows the BIOS to tell the controller what it wants and then let the controller and the CPU perform the complete task by them. This is much simpler and more efficient (also faster).
AMIBIOS SETUP – PERIPHERAL SETUP (C)2001 American Megatrends, Inc. All Rights Reserved OnBoard FDC OnBoard Serial Port 1 OnBoard Serial Port 2 Serial Port2 Mode Duplex Mode OnBoard Prarllel Port Parallel Port Mode EPP Version Parallel Port DMA Channel Parallel Port IRQ OnBoard IDE OnBoard AC’97 Audio SoundBlaster SB I/O Base Address SB IRQ Select SB DMA Select OnBoard Legacy Audio MPU-401 MPU-401 I/O Address Enabled 3F8/COM1 2F8/COM2 Normal N/A 378 ECP N/A 3 IRQ7 Both Enabled Disabled 220h-22Fh 5FT 1 Enabled Disabled 300h-303h Available Options: Disabled Primary Secondary Both
ESC:Exit :Sel PgUp/PgDn: Modify F2/F3:Color
35
4.10 Hardware Monitor Setup
AMIBIOS SETUP – HARDWARE MONITOR SETUP (C)2001 American Megatrends, Inc. All Rights Reserved *** System Hardware Monitor *** TSENS1 Temperature CPU Fan Speed Vcore + 2.500V +3.300V +5.000V +12.000V Available Options: Disabled Enabled Reset
ESC:Exit :Sel PgUp/PgDn: Modify F2/F3:Color
36
4.11 Auto-Detect Hard Disks
This option detects the parameters of an IDE hard disk drive, and automatically enters them into the Standard CMOS Setup screen. Up to four IDE drives can be detected, with parameters for each appearing in sequence inside a box. To accept the displayed entries, press the “Y” key; to skip to the next drive, press the “N” key. If you accept the values, the parameters will appear listed beside the drive letter on the screen.
AMIBIOS HIFLEX SETUP UTILITY – VERSION x.xx (C)2001 American Megatrends, Inc. All Rights Reserved Standard CMOS Setup Advanced CMOS Setup Advanced Chipset Setup Power Management Setup PCI / Plug and Play Setup Peripheral Setup Hardware Monitor Setup Auto-Detect Hard Disks Change User Password Change Supervisor Password Auto Configuration with Optimal Settings Auto Configuration with Fail Safe Settings Save Settings and Exit Exit Without Saving Standard CMOS setup for changing time, date, hard disk type, etc. ESC:Exit :Sel F2/F3: Color F10: Save & Exit
37
4.12 Change Supervisor/User Password
AMIBIOS HIFLEX SETUP UTILITY – VERSION x.xx (C)2001 American Megatrends, Inc. All Rights Reserved Standard CMOS Setup Advanced CMOS Setup Advanced Chipset Setup Power Management Setup Enter new supervisor password: _ Change Supervisor Password Auto Configuration with Optimal Settings Auto Configuration with Fail Safe Settings Save Settings and Exit Exit Without Saving Standard CMOS setup for changing time, date, hard disk type, etc. ESC:Exit :Sel F2/F3: Color F10: Save & Exit
You can set either supervisor or user password, or both of then. The differences between are:
supervisor password: can enter and change the options of the setup menus. user password: just can only enter but do not have the right to change the options of the setup menus.
When you select this function, the following message will appear at the center of the screen to assist you in creating a password. ENTER PASSWORD: Type the password, up to eight characters in length, and press . The password typed now will clear any previously entered password from CMOS memory. You will be asked to confirm the password. Type the password again and press . You may also press to abort the selection and not enter a password. To disable a password, just press when you are prompted to enter the password. A message will confirm the password will be disabled. Once the password is disabled, the system will boot and you can enter Setup freely. PASSWORD DISABLED. 38
When a password has been enabled, you will be prompted to enter it every time you try to enter Setup. This prevents an unauthorized person from changing any part of your system configuration. Additionally, when a password is enabled, you can also require the BIOS to request a password every time your system is rebooted. This would prevent unauthorized use of your computer. You determine when the password is required within the BIOS Features Setup Menu and its Security option (see Section 3). If the Security option is set to “System”, the password will be required both at boot and at entry to Setup. If set to “Setup”, prompting only occurs when trying to enter Setup.
4.13 Auto Configuration with Optimal Settings
When you press on this item you will get a confirmation dialog box with a message shown below. This option allows you to load/restore the BIOS default values permanently stored in the BIOS ROM. Pressing ‘Y’ loads the BIOS default values for the most stable, minimal-performance system operations.
AMIBIOS HIFLEX SETUP UTILITY – VERSION x.xx (C)2001 American Megatrends, Inc. All Rights Reserved Standard CMOS Setup Advanced CMOS Setup Advanced Chipset Setup Power Management Setup Load high performance settings (Y/N) ? N Change Supervisor Password Auto Configuration with Optimal Settings Auto Configuration with Fail Safe Settings Save Settings and Exit Exit Without Saving Standard CMOS setup for changing time, date, hard disk type, etc. ESC:Exit :Sel F2/F3: Color F10: Save & Exit
39
4.14 Auto Configuration with Fail Safe Settings
When you press on this item you get a confirmation dialog box with a message similar to the figure below. This option allows you to load/restore the default values to your system configuration, optimizing and enabling all high performance features. Pressing ‘Y’ loads the default values that are factory settings for optimal performance system operations.
AMIBIOS HIFLEX SETUP UTILITY – VERSION x.xx (C)2001 American Megatrends, Inc. All Rights Reserved Standard CMOS Setup Advanced CMOS Setup Advanced Chipset Setup Power Management Setup Load failsafe settings (Y/N) ? N Change Supervisor Password Auto Configuration with Optimal Settings Auto Configuration with Fail Safe Settings Save Settings and Exit Exit Without Saving Standard CMOS setup for changing time, date, hard disk type, etc. ESC:Exit :Sel F2/F3: Color F10: Save & Exit
40
4.15 Save Settings and Exit
Pressing on this item asks for confirmation:
AMIBIOS HIFLEX SETUP UTILITY – VERSION x.xx (C)2001 American Megatrends, Inc. All Rights Reserved Standard CMOS Setup Advanced CMOS Setup Advanced Chipset Setup Power Management Setup Save current settings and exit (Y/N) ? Y Change Supervisor Password Auto Configuration with Optimal Settings Auto Configuration with Fail Safe Settings Save Settings and Exit Exit Without Saving Standard CMOS setup for changing time, date, hard disk type, etc. ESC:Exit :Sel F2/F3: Color F10: Save & Exit
Pressing “Y” stores the selections made in the menus in CMOS – a special section of memory that stays on after you turn your system off. The next time you boot your computer, the BIOS configures your system according to the Setup selections stored in CMOS. After saving the values the system is restarted again.
41
4.16 Exit Without Saving
Pressing on this item asks for confirmation: Quit without saving (Y/N)? Y This allows you to exit Setup without storing in CMOS any change. The previous selections remain in effect. This exits the Setup utility and restarts your computer.
AMIBIOS HIFLEX SETUP UTILITY – VERSION x.xx (C)2001 American Megatrends, Inc. All Rights Reserved Standard CMOS Setup Advanced CMOS Setup Advanced Chipset Setup Power Management Setup Quit without saving (Y/N) ? N Change Supervisor Password Auto Configuration with Optimal Settings Auto Configuration with Fail Safe Settings Save Settings and Exit Exit Without Saving Standard CMOS setup for changing time, date, hard disk type, etc. ESC:Exit :Sel F2/F3: Color F10: Save & Exit
Abandon all Data & Exit Setup
42
Chapter 5
Software Utilities
This chapter contains the detailed information of IDE, VGA, Audio and LAN driver installation procedures.
5.1
VIA 4 in 1 Driver
The utility disk that came with the delivery package contains an auto-run program that invokes the installation programs for the VIA 4 in 1 driver. The following describes the installation procedures of each driver.
1. Insert Utility CD Disk to your CD ROM. The main menu will pop up as shown below.
43
2.
Press “VIA 4 IN 1” and to go Setup.
3.
Once the Welcome screen appears on the screen, make sure to close any applications running and then click on the Next button.
44
4.
When the Readme window pops on the screen, you may read the whole document including the license agreement or just press Yes to skip through and continue installation.
5.
The 4 in 1 Setup dialog is now displayed. Select on Normally Install and then click on Next.
45
6.
The next window lists all components detected in your system and asks you to select the ones requiring drivers. Tick on all items then proceed by clicking on the Next button below the screen.
7.
The program starts to install the ATAPI driver when you click the Next button on the screen below.
8.
When the ATAPI driver is completely installed. The utility then displays your DMA mode status and allows you to enable it. Tick on the box and press on the Next button to continue.
46
9.
The following screen then gives you the choice of installing the AGP driver in standard o turbo mode. Select on the Standard Mode and then click on Next to proceed.
10. Installation of the AGP driver is now complete. Once the screen below appears, select on restarting your computer to activate all drivers/settings completed.
47
5.2
1.
Audio Driver Installation
With the Utility CD Disk still in your CD ROM drive, open the File Manager and then select the CD-ROM drive. As soon as the system reads the disk, the VGA Menu screen below will appear on your display. Click on VIA_AC97 from the main menu.
2.
Once the Welcome screen appears on the screen, make sure to close applications that are running and then click the Next button.
48
3.
The Select Components dialog box is now displayed. Select on Install driver and then click on Next.
4.
The program will now require the Windows installation disk for proper hardware installation. Insert the CD and then click on Next.
49
5.
When the display below appears on your screen, Setup is already installing and copying the related files onto your hard drive. Click on the Next button to proceed.
6.
After the audio driver installation finishes, select the Finish button to complete the installation process.
50
5.3
1.
VGA Driver Installation
5.3.1 WIN98
With the Utility CD Disk still in your CD ROM drive, right click on My Computer icon from the Windows menu. Select on System Properties and then proceed to the Device Manager from the main menu.
2.
Select on Display Adapters from the list of devices then double-click on Standard PCI Graphics Adapter (VGA). The Standard PCI Graphics Adapter (VGA) Properties screen then appears, allowing you to re-install the driver. Select Driver from the main menu to proceed.
51
3.
The window then displays the current status of your VGA driver. Press on Update Driver button to continue. The program will then launch the Update Device Driver Wizard window that will install your device driver. Click on the Next button to proceed to the next step. When the succeeding window asks you what you wish Windows to do, tick on the “Search for a better driver….” Click on the Next button to proceed.
4.
5.
The Update Device Driver Wizard will then ask you to specify, by ticking, the path of the new driver. Tick on the open boxes where you require the program to search for the device driver then click on the Browse button to manually specify the path.
52
6. 7.
Press on the OK button as soon as you have located the path of your driver. Once the program returns to the Add New Hardware Wizard screen, your specified location will appear. Press on the Next button to continue.
8.
Once the program detects the device driver (*.inf) file from your specified location, it will automatically copy the files into your hard drive.
53
9.
When copying of driver files finishes, the program will then ask you to insert your Windows.
10. The program then copies the necessary files from your Windows installation disk to complete the driver setup process. Once the driver is completely installed, the following message appears on your display. Click on the Finish button to proceed.
11. Restart your computer to make the new system settings take effect. Click on the Yes button when the screen below appears and your VGA Driver for Win98 are now completely installed.
5.3.2 WIN NT
1. Click the Start button on the lower left hand corner of your screen, then select Setting. Choose Control Panel and double-click on the Display icon to launch its Display Properties window. Click on the Settings tab, and then choose Display Type. In the Change Display Type window, click on Have Disk.
54
2.
Specify the path of the new driver and then press on Enter. (If in driver D:, type d:\Vga/Via_8606/Nt40)
55
3.
Select S3 Graphics Twister
4. 5.
Click OK or press Enter. You will see warning panel about Third Party Drivers. Click on Yes to finish the installation.
56
6.
Once the installation is completed, you must shut down the system and restart for the new driver to take effect.
57
5.3.3 WIN 2K
1. With the Utility CD Disk still in your CD ROM drive, right click on My Computer icon from the Windows menu. Select on System Properties and then proceed to the Device Manager from the main menu.
2.
Select on Other Devices from the list of devices then double-click on Video Controller (VGA Compatible).
58
3.
The Video Controller (VGA Compatible) Properties screen then appears, allowing you to re-install the driver. Select Driver from the main menu to proceed.
4.
When the succeeding window asks you what you wish Windows to do, tick on the “Search for a better driver….” Click on the Next button to proceed.
59
5.
Upgrade Device Driver Wizard screen appear, select Display adapters and click on Next.
6.
Once the program returns to the Add New Hardware Wizard screen, your specified location will appear. Press on the Next button to continue.
7.
The program then copies the necessary files from your Windows installation disk to complete the driver setup process. Once the driver is completely installed, the following message appears on your display. Click on the Finish button to proceed.
60
5.3.4 WIN XP
1. With the Utility CD Disk still in your CD ROM drive, open the File Manager and then select the CD-ROM drive. As soon as the system reads the disk, the VGA Menu screen below will appear on your display. Click on VIA_8606 from the main menu.
61
2.
Select the operating system of your computer to proceed with the installation process.
62
3.
Once the Welcome screen appears on the screen, make sure to close applications that are running and then click the Next button.
63
4.
When the display below appears on your screen, Setup is already ready to install and copy the related files onto your hard drive. Click on the Next button to proceed.
5.
After the installation finishes, you will be prompted to restart your system. We recommend you to reboot your computer to allow the new settings to take effect. Click on the Finish button to reboot.
64
5.4
1.
LAN Driver Installation
5.4.1 RTL8100 Driver Installation for WIN98
With the Utility CD Disk still in your CD ROM drive, right click on My Computer icon from the Windows menu. Select on System Properties and then proceed to the Device Manager from the main menu.
2.
Select on Other Devices from the list of devices then double-click on PCI Ethernet Controller.
65
3.
The PCI Ethernet Controller Properties screen then appears, allowing you to re-install the driver. Select Driver from the main menu to proceed.
4.
The window then displays the current status of your LAN driver. Press on Update Driver button to continue.
66
5.
The program will then launch the Update Device Driver Wizard window that will install your device driver. Click on the Next button to proceed to the next step.
6.
When the succeeding window asks you what you wish Windows to do, tick on the “Search for a better driver….” Click on the Next button to proceed.
67
7.
The Update Device Driver Wizard will then ask you to specify, by ticking, the path of the new driver. Tick on the open boxes where you require the program to search for the device driver then click on the Browse button to manually specify the path.
8.
Press on the OK button as soon as you have located the path of your driver.
9.
Once the program returns to the Add New Hardware Wizard screen, your specified location will appear. Press on the Next button to continue.
68
10. Once the program detects the device driver (*.inf) file from your specified location, it will automatically copy the files into your hard drive. 11. When copying of driver files finishes, the program will then ask you to insert your Windows.
12. The program then copies the necessary files from your Windows installation disk to complete the driver setup process. Once the driver is completely installed, the following message appears on your display. Click on the Finish button to proceed.
69
13. Restart your computer to make the new system settings take effect. Click on the Yes button when the screen below appears and your LAN Driver for Win95 and Win98 are now completely installed.
5.4.2 RTL8100 Driver Installation for WIN NT4.0
1. With the Utility CD Disk still in your CD ROM drive, right click on Network Neighborhood icon from the Windows menu. Select on Properties.
70
2.
The system automatically detects the absence of Windows NT Networking. Click on the Yes button to start installation.
3.
Tick on the “Wired to Network” once the following screen appears. Click on the Next to proceed.
71
4.
Click on the Start Search button for the program to locate the Network Adapter.
5.
Once setup finishes the search, it will list a number of adapters for you to choose from. Press on the Have Disk button to assign the driver path location.
72
6.
Setup now asks you for the location of the driver. When you have entered the new driver path, press on the OK button to continue.
7.
When Setup finds the information it needs about the new driver, it will display the device it found on the following screen. Press on the OK button to accept and proceed.
73
8.
Setup then returns to Network Setup Wizard screen and displays your new Network Adapter. Click on Next to continue.
9.
The Network Setup Wizard then allows you to set the Network Protocols on your network. Select the appropriate protocol and then click on Next to continue.
74
10. Before Setup starts installing the components found and the settings you made, it will give you the option to proceed or go back for changes from the following screen. Click on the Next button once you are sure of your devices.
11. Windows NT Setup will then need to copy files necessary to update the system information. Specify the path then press Continue.
75
12. Once it finishes copying the files, Setup will now allow you to choose the Duplex Mode of your LAN controller. Press on the Continue button after making your selection.
13. When Setup asks if you wish to change the TCP/IP settings of your system, select the appropriately. The default choice is No.
76
14. Setup then starts the Networking installation and copies the files.
15. When Setup finishes copying, the TCP/IP properties of your system will then pop up on your screen like the one shown below. Make the necessary changes then click on OK to continue.
77
16. When the screen below appears, click on Next to continue.
17. Setup then prompts you that it is ready to start the network. You may complete the installation thereafter. Click on Next to continue.
78
18. Assign the workgroup or domain setting of your computer. Click on Next to continue.
19. Restart your computer once the screen below appears. Click on Finish to continue.
79
20. Click on the Yes button to restart your computer. The LAN driver installation for WIN NT4.0 is now complete.
5.4.3 82559 Driver Installation for WIN 98
Windows 98 will detect the network driver automatically therefore there is no need for further configuration.
1. 2. 3. Click Start, then Setting then select Control panel. Start the network applet program. In the Network window, click Add.
80
4. 5.
From the Select Network Component Type, select Adapter then click Add. Specify the path the new driver and press key (if in driver a:, type a:\). If you’re not sure exactly where the drivers are, choose the Browse button and find it.
6. 7. 8. 9.
Click OK. Windows 95 will copy the network drivers to the proper directories into your system. Continue choosing OK until asked to restart your system. After restarting your computer, check the network driver and its properties. Be sure it looks similar with the following figure.
5.4.4 82559 Driver Installation for WIN NT4.0
1. 2. 3. Click the Start button, then go to Setting and click on Control Panel. Click on the Network icon to start the Network Window. Click on the Adapters tab, and then click Add.
81
4. 5. 6. 7. 8. 9.
In the Select Network Adapter window, click Have Disk. This will bring up the Insert Disk window. Supply the directory where the Windows NT driver files are located (If in driver a: type a:\). The Select OEM Option window will show up. Select Intel EtherExpress PRO Adapter Click OK to finish the installation. Once the installation is completed, the system must be shut down and restarted for the new driver to take effect.
10. After restart, confirm the network driver and its properties.
82
工商网监
湘ICP备2023018690号
