9310-36-RC

PL IA N T Features CO M ■ Formerly This series is currently available but not recommended for new designs. model *R oH S ■ High Q value ■ Inductance range: 0.15 μH to 33 μH Applications ■ RoHS compliant* ■ Filters ■ Output chokes 9310 Series Molded Axial Inductor Electrical Specifications Inductance Bourns Part No. 9310-00-RC 9310-02-RC 9310-04-RC 9310-06-RC 9310-07-RC 9310-08-RC 9310-10-RC 9310-12-RC 9310-14-RC 9310-16-RC 9310-18-RC 9310-20-RC 9310-22-RC 9310-24-RC 9310-26-RC 9310-28-RC 9310-30-RC 9310-32-RC 9310-34-RC 9310-36-RC 9310-38-RC 9310-40-RC 9310-42-RC 9310-44-RC 9310-46-RC 9310-48-RC 9310-50-RC 9310-52-RC (μH) Tol. (%) 0.15 0.22 0.33 0.47 0.56 0.68 0.82 1.0 1.2 1.5 1.8 2.2 2.7 3.3 3.9 4.7 5.6 6.8 8.2 10 12 15 18 22 24 27 30 33 ±20 ±20 ±20 ±20 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 Q Min. 50 50 45 45 50 50 50 50 33 33 33 33 33 33 33 33 45 50 50 55 65 65 75 75 60 60 65 65 Test Frequency (MHz) 25 25 25 25 25 25 25 25 7.9 7.9 7.9 7.9 7.9 7.9 7.9 7.9 7.9 7.9 7.9 7.9 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 SRF (MHz) Min. 525 450 360 310 280 250 220 200 180 160 150 135 120 110 100 90 60 55 50 45 42 40 34 30 26 25 19 19 DCR (Ω) Max. 0.030 0.055 0.090 0.120 0.135 0.15 0.22 0.29 0.42 0.50 0.65 0.95 1.20 2.00 2.30 2.60 0.32 0.50 0.60 0.90 1.1 1.4 2.3 2.5 2.5 2.6 2.8 3.0 Idc (mA) 2450 1900 1400 1225 1220 1100 900 830 650 600 525 435 385 300 280 260 750 600 545 445 404 370 280 265 265 260 255 250 General Specifications Temperature Rise ................ 35 °C at Idc Operating Temperature ................................ -55 °C to +105 °C Storage Temperature ................................ -55 °C to +105 °C Dielectric Strength ................. 1000 Vrms Materials Core .............................................. Ferrite Wire ............................ Enameled copper Terminal Coating................................. Sn Packaging Standard..................1000 pcs. per bag Optional ......1000 pcs. per 14-inch reel How to Order 9310 - 02 - __ - RC Model Value Code Two-digit code from table (Example: -02 = 0.22 μH) Packaging Code Blank = 1000 pcs./bag TR = 1000 pcs./14-inch reel Compliance Code RC = RoHS compliant* Examples: • 9310-00-RC = 0.15 μH packaged 1000 pcs./bag. • 9310-18-TR-RC = 1.8 μH packaged 1000 pcs./14-inch reel. Electrical Schematic Product Dimensions 25.4 (1.00) MIN. 9.53 ± 0.25 (.375 ± 0.01) DIMENSIONS: 0.64 (0.025) MM (INCHES) 3.96 ± 0.25 (0.156 ± 0.01) *RoHS Directive 2002/95/EC Jan. 27, 2003 including annex and RoHS Recast 2011/65/EU June 8, 2011. Specifications are subject to change without notice. The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time. Users should verify actual device performance in their specific applications. 9310 Series Molded Axial Inductor Typical Part Marking - MIL-STD Color Code Color Black Brown Red Orange Yellow Green Blue Violet Gray White Silver Gold 1st & 2nd Signifi cant Figure or Decimal Point 0 1 2 3 4 5 6 7 8 9 Decimal Point Multiplier Tolerance Example for L value less than 10 µH 6.8 µH, ±10 % Mil. identifi er (Silver, twice the width of other bands) 1st signifi cant fi gure (Blue) Decimal point (Gold) 2nd signifi cant fi gure (Gray) Tolerance (Silver) 1 10 100 1000 Example for L value 10 µH and higher 270 µH, ±5 % ± 10 % ±5% Mil. identifi er (Silver, twice the width of other bands) 1st signifi cant fi gure (Red) 2nd signifi cant fi gure (Purple) Multiplier (Brown) Tolerance (Gold) REV. 01/15 Specifications are subject to change without notice. The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time. Users should verify actual device performance in their specific applications.