0
登录后你可以
  • 下载海量资料
  • 学习在线课程
  • 观看技术视频
  • 写文章/发帖/加入社区
创作中心
发布
  • 发文章

  • 发资料

  • 发帖

  • 提问

  • 发视频

创作活动
BDW84A

BDW84A

  • 厂商:

    BOURNS(伯恩斯)

  • 封装:

  • 描述:

    BDW84A - PNP SILICON POWER DARLINGTONS - Bourns Electronic Solutions

  • 数据手册
  • 价格&库存
BDW84A 数据手册
BDW84, BDW84A, BDW84B, BDW84C, BDW84D PNP SILICON POWER DARLINGTONS ● Designed for Complementary Use with BDW83, BDW83A, BDW83B, BDW83C and BDW83D 150 W at 25°C Case Temperature 15 A Continuous Collector Current C B SOT-93 PACKAGE (TOP VIEW) 1 ● ● ● 2 Minimum hFE of 750 at 3V, 6 A E 3 Pin 2 is in electrical contact with the mounting base. MDTRAAA absolute maximum ratings at 25°C case temperature (unless otherwise noted) RATING BDW84 BDW84A Collector-base voltage (IE = 0) BDW84B BDW84C BDW84D BDW84 BDW84A Collector-emitter voltage (IB = 0) (see Note 1) BDW84B BDW84C BDW84D Emitter-base voltage Continuous collector current Continuous base current Continuous device dissipation at (or below) 25°C case temperature (see Note 2) Continuous device dissipation at (or below) 25°C free air temperature (see Note 3) Unclamped inductive load energy (see Note 4) Operating junction temperature range Operating temperature range Operating free-air temperature range NOTES: 1. 2. 3. 4. VEBO IC IB Ptot Ptot ½LIC2 Tj Tstg TA VCEO V CBO SYMBOL VALUE -45 -60 -80 -100 -120 -45 -60 -80 -100 -120 -5 -15 -0.5 150 3.5 100 -65 to +150 -65 to +150 -65 to +150 V A A W W mJ °C °C °C V V UNIT These values apply when the base-emitter diode is open circuited. Derate linearly to 150°C case temperature at the rate of 1.2 W/°C. Derate linearly to 150°C free air temperature at the rate of 28 mW/°C. This rating is based on the capability of the transistor to operate safely in a circuit of: L = 20 mH, IB(on) = -5 mA, RBE = 100 Ω, VBE(off) = 0, RS = 0.1 Ω, VCC = - 20 V. AUGUST 1978 - REVISED SEPTEMBER 2002 Specifications are subject to change without notice. NOITAMROFNI TCUDORP 1 BDW84, BDW84A, BDW84B, BDW84C, BDW84D PNP SILICON POWER DARLINGTONS electrical characteristics at 25°C case temperature (unless otherwise noted) PARAMETER TEST CONDITIONS BDW84 V(BR)CEO Collector-emitter breakdown voltage BDW84A IC = -30 mA IB = 0 (see Note 5) BDW84B BDW84C BDW84D VCE = -30 V ICEO Collector-emitter cut-off current VCE = -30 V VCE = -40 V VCE = -50 V VCE = -60 V VCB = -45 V VCB = -60 V VCB = -80 V VCB = -100 V ICBO Collector cut-off current VCB = -120 V VCB = -45 V VCB = -60 V VCB = -80 V VCB = -100 V VCB = -120 V IEBO hFE VBE(on) VCE(sat) VEC Emitter cut-off current Forward current transfer ratio Base-emitter voltage Collector-emitter saturation voltage Parallel diode forward voltage VEB = VCE = VCE = VCE = IB = -5 V -3 V -3 V -3 V -12 mA IB = 0 IB = 0 IB = 0 IB = 0 IB = 0 IE = 0 IE = 0 IE = 0 IE = 0 IE = 0 IE = 0 IE = 0 IE = 0 IE = 0 IE = 0 IC = 0 IC = -6 A IC = -15 A IC = -6 A IC = -6 A IC = -15 A IB = 0 (see Notes 5 and 6) (see Notes 5 and 6) (see Notes 5 and 6) 750 100 -2.5 -2.5 -4 -3.5 V V V TC = 150°C TC = 150°C TC = 150°C TC = 150°C TC = 150°C BDW84 BDW84A BDW84B BDW84C BDW84D BDW84 BDW84A BDW84B BDW84C BDW84D BDW84 BDW84A BDW84B BDW84C BDW84D MIN -45 -60 -80 -100 -120 -1 -1 -1 -1 -1 -0.5 -0.5 -0.5 -0.5 -0.5 -5 -5 -5 -5 -5 -2 20000 mA mA mA V TYP MAX UNIT IB = -150 mA IE = -15 A NOTES: 5. These parameters must be measured using pulse techniques, tp = 300 µs, duty cycle ≤ 2%. 6. These parameters must be measured using voltage-sensing contacts, separate from the current carrying contacts. thermal characteristics PARAMETER RθJC RθJA Junction to case thermal resistance Junction to free air thermal resistance MIN TYP MAX 0.83 35.7 UNIT °C/W °C/W resistive-load-switching characteristics at 25°C case temperature PARAMETER ton toff † TEST CONDITIONS IC = -10 A VBE(off) = 4.2 V IB(on) = -40 mA RL = 3 Ω † MIN IB(off) = 40 mA tp = 20 µs, dc ≤ 2% TYP 0.9 7 MAX UNIT µs µs Turn-on time Turn-off time Voltage and current values shown are nominal; exact values vary slightly with transistor parameters. 2 AUGUST 1978 - REVISED SEPTEMBER 2002 Specifications are subject to change without notice. NOITAMROFNI TCUDORP BDW84, BDW84A, BDW84B, BDW84C, BDW84D PNP SILICON POWER DARLINGTONS TYPICAL CHARACTERISTICS TYPICAL DC CURRENT GAIN vs COLLECTOR CURRENT VCE(sat) - Collector-Emitter Saturation Voltage - V 10000 TCS145AG COLLECTOR-EMITTER SATURATION VOLTAGE vs COLLECTOR CURRENT -2·0 tp = 300 µs, duty cycle < 2% IB = IC / 100 -1·5 TCS145AH hFE - Typical DC Current Gain TC = -40°C TC = 25°C TC = 100°C 1000 -1·0 -0·5 TC = -40°C TC = 25°C TC = 100°C 0 -0·5 -1·0 IC - Collector Current - A -10 -20 VCE = -3 V tp = 300 µs, duty cycle < 2% 100 -0·5 -1·0 IC - Collector Current - A -10 -20 Figure 1. Figure 2. BASE-EMITTER SATURATION VOLTAGE vs COLLECTOR CURRENT -3·0 VBE(sat) - Base-Emitter Saturation Voltage - V TC = -40°C TC = 25°C -2·5 TC = 100°C TCS145AI -2·0 -1·0 -1·5 -0·5 IB = IC / 100 tp = 300 µs, duty cycle < 2% 0 -0·5 -1·0 IC - Collector Current - A -10 -20 Figure 3. AUGUST 1978 - REVISED SEPTEMBER 2002 Specifications are subject to change without notice. NOITAMROFNI TCUDORP 3 BDW84, BDW84A, BDW84B, BDW84C, BDW84D PNP SILICON POWER DARLINGTONS MAXIMUM SAFE OPERATING REGIONS MAXIMUM FORWARD-BIAS SAFE OPERATING AREA -100 SAS145AB IC - Collector Current - A -10 -1·0 BDW84 BDW84A BDW84B BDW84C BDW84D -0·1 -1·0 -10 -100 -1000 VCE - Collector-Emitter Voltage - V Figure 4. THERMAL INFORMATION MAXIMUM POWER DISSIPATION vs CASE TEMPERATURE 160 Ptot - Maximum Power Dissipation - W 140 120 100 80 60 40 20 0 0 25 50 75 100 125 150 TC - Case Temperature - °C TIS140AB Figure 5. 4 AUGUST 1978 - REVISED SEPTEMBER 2002 Specifications are subject to change without notice. NOITAMROFNI TCUDORP BDW84, BDW84A, BDW84B, BDW84C, BDW84D PNP SILICON POWER DARLINGTONS MECHANICAL DATA SOT-93 3-pin plastic flange-mount package This single-in-line package consists of a circuit mounted on a lead frame and encapsulated within a plastic compound. The compound will withstand soldering temperature with no deformation, and circuit performance characteristics will remain stable when operated in high humidity conditions. Leads require no additional cleaning or processing when used in soldered assembly. SOT-93 4,90 4,70 ø 4,1 4,0 15,2 14,7 1,37 1,17 3,95 4,15 16,2 MAX. 12,2 MAX. 31,0 TYP. 18,0 TYP. 1 1,30 1,10 2 3 0,78 0,50 11,1 10,8 2,50 TYP. ALL LINEAR DIMENSIONS IN MILLIMETERS NOTE A: The centre pin is in electrical contact with the mounting tab. MDXXAW 5 AUGUST 1978 - REVISED SEPTEMBER 2002 Specifications are subject to change without notice. NOITAMROFNI TCUDORP
BDW84A 价格&库存

很抱歉,暂时无法提供与“BDW84A”相匹配的价格&库存,您可以联系我们找货

免费人工找货