CD-MBL210SL

Features Applications ■ RoHS compliant* ■ AC operated products ■ Low power loss and high efficiency ■ Computer monitors ■ High current capability ■ Set-top boxes ■ Low profile package ■ Cable modems CD-MBL2xxS(L) Series Surface Mount Bridge Rectifier Diode General Information The markets of portable communications, computing and video equipment are challenging the semiconductor industry to develop increasingly smaller electronic components. Bourns offers Bridge Rectifier Diodes for rectification applications in compact chip package 0.23 ˝ x 0.20 ˝ size format, which offers PCB real estate savings and are considerably smaller than standard parts. The Bridge Rectifier Diodes offer a forward current of 2 A with a choice of repetitive peak reverse voltages between 600 V and 1000 V. 4 – 1 + ~ 3 ~ 2 Absolute Maximum Ratings (@ TA = 25 °C Unless Otherwise Noted) Parameter Symbol Maximum Repetitive Peak Reverse Voltage VRRM Maximum Average Forward Rectified Current (TA = 55 °C) IF(AV) Peak Forward Surge Current 8.3 ms Single Half Sine-Wave Superimposed on Rated Load (JEDEC Method) IFSM Operating Temperature Range Storage Temperature Range CDMBL206S MBL208S MBL210S 600 800 1000 MBL206SL MBL208SL MBL210SL 600 800 1000 2.0 50.0 Unit V A 60.0 A TJ -55 to +175 °C TSTG -55 to +175 °C Electrical Characteristics (@ TA = 25 °C Unless Otherwise Noted) Parameter Instantaneous Forward Voltage Repetitive Peak Reverse Current Junction Capacitance Symbol VF IRRM CJ Thermal Resistance, Junction to Air (1) RΘJA Thermal Resistance, Junction to Lead (1) RΘJL CD-MBL2xxS(L) Test Conditions IF = 2 A VR = VRRM VR = 4 V, f = 1.0 MHz Min. Typ. Max. CD-MBL2xxS 0.95 1.0 CD-MBL2xxSL 0.94 0.96 TA = +25 °C CD-MBL2xxS 0.08 5.0 CD-MBL2xxSL 35 CD-MBL2xxS 95 CD-MBL2xxSL 95 CD-MBL2xxS 15 CD-MBL2xxSL 15 25 Unit V μA pF °C / W °C / W NOTE 1: Measured when mounted on PCB with 5.0 mm x 5.0 mm (0.2 “ x 0.2 “) copper pad areas. WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov *RoHS Directive 2015/863, Mar 31, 2015 and Annex. Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. CD-MBL2xxS(L) Series Surface Mount Bridge Rectifier Diode Rating and Characteristic Curves Forward Current Derating Curve Maximum Non-Repetitive Peak Forward Surge Current 60 Peak Forward Surge Current (Amps) Average Forward Rectified Current (Amps) 2.5 2.0 CD-MBL2xxSL 1.5 1.0 CD-MBL2xxS 0.5 60 Hz Resistive or Inductive Load 0 0 25 50 40 CD-MBL2xxSL 30 CD-MBL2xxS 20 10 0 75 50 100 125 150 175 1 10 Ambient Temperature (°C) Forward Characteristics (CD2320-B2xxx) Forward Characteristics (CD-MBL2xxS(L)) 10.00 TJ = 150 °C Instantaneous Forward Current (Amps) Instantaneous Forward Current (Amps) 10.00 TJ = 125 °C TJ = 100 °C 1.00 TJ = 25 °C 0.10 0.01 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 TJ = 150 °C TJ = 125 °C TJ = 100 °C 1.00 TJ = 25 °C 0.10 0.01 0.3 1.1 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 Instantaneous Forward Voltage (Volts) Instantaneous Forward Voltage (Volts) Reverse Characteristics Typical Junction Capacitance 100 100 Junction Capacitance (pF) Instantaneous Reverse Current (µA) 100 Number of Cycles at 60 Hz 10.0 1.0 CD-MBL2xxSL CD-MBL2xxS 10 1 0.1 0.10 0.2 0.4 1 2 4 10 20 40 100 Reverse Voltage (Volts) 0.01 0 20 40 60 80 100 120 Percent of Rated Peak Reverse Voltage (%) 140 Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. CD-MBL2xxS(L) Series Surface Mount Bridge Rectifier Diode Product Dimensions This is an RoHS2 compliant product, packaged with FRP substrate and is epoxy underfilled. The terminals are pure tin plated (lead free) and are solderable per MIL-STD-750, Method 2026. The package and dimensions are shown below. A Dimensions B TOP VIEW F C MM DIMENSIONS: (INCHES) D A 5.20 - 5.40 (0.205 - 0.213) B 4.10 - 4.30 (0.161 - 0.169) C 5.70 - 5.90 (0.224 - 0.232) D 1.00 - 1.20 (0.039 - 0.047) E 0.85 - 0.95 (0.033 - 0.037) F 1.05 - 1.35 (0.0413 - 0.0531) E Recommended Footprint How to Order CD - MBL 2 06 SL 4.10 ± 0.1 (0.161 ± 0.004) Common Code Chip Diode Model MBL = MBL Bridge Series Average Forward Current 2= 2A 5.72 ± 0.1 (0.225 ± 0.004) Reverse Voltage 06 = 600 V 08 = 800 V 10 = 1000 V Forward Voltage Suffix S = Standard Forward Voltage SL = Low Forward Voltage Typical Part Marking 1.10 ± 0.1 (0.043 ± 0.004) 1.5 ± 0.1 (0.059 ± 0.004) DIMENSIONS: MANUFACTURER’S TRADEMARK 20L MM (INCHES) VRMS = 800 V DATE CODE LOW FORWARD VOLTAGE FORWARD CURRENT x 100 mA Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. CD-MBL2xxS(L) Series Surface Mount Bridge Rectifier Diode Packaging Information The surface mount product is packaged in a 12 mm x 8 mm tape and reel format per EIA-481 standard. P 0 P 1 d T E Index Hole 120 ° F D2 W B D1 D P A Trailer ....... ....... End C Device ....... ....... 10 pitches (min.) ....... ....... Leader ....... ....... W1 Start DIMENSIONS: MM (INCHES) 10 pitches (min.) Direction of Feed Item Symbol CD-MBL2xxS(L) Carrier Width A 5.90 ± 0.10 (0.232 ± 0.004) Carrier Length B 6.50 ± 0.10 (0.256 ± 0.004) Carrier Depth C 1.50 ± 0.10 (0.059 ± 0.004) Sprocket Hole d 1.55 ± 0.05 (0.061 ± 0.002) Reel Outside Diameter D 330 (12.992) Reel Inner Diameter D1 Feed Hole Diameter D2 13.0 ± 0.20 (0.512 ± 0.008) Sprocket Hole Position E 1.75 ± 0.10 (0.069 ± 0.004) Punch Hole Position F 5.50 ± 0.05 (0.217 ± 0.002) Punch Hole Pitch P 8.00 ± 0.10 (0.315 ± 0.004) Sprocket Hole Pitch P0 4.00 ± 0.10 (0.157 ± 0.004) Embossment Center P1 2.00 ± 0.05 (0.079 ± 0.002) Overall Tape Thickness T 0.20 ± 0.10 (0.008 ± 0.004) Tape Width W 12.00 ± 0.20 (0.472 ± 0.008) Reel Width W1 Quantity per Reel -- 50.0 MIN. (1.969) 18.7 MAX. (0.736) 5,000 Asia-Pacific: Tel: +886-2 2562-4117 Email: asiacus@bourns.com Europe: Tel: +36 88 885 877 Email: eurocus@bourns.com The Americas: Tel: +1-951 781-5500 Email: americus@bourns.com www.bourns.com REV. 08/19 Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. Legal Disclaimer Notice This legal disclaimer applies to purchasers and users of Bourns® products manufactured by or on behalf of Bourns, Inc. and P[ZHɉSPH[LZJVSSLJ[P]LS`¸)V\YUZ¹ Unless otherwise expressly indicated in writing, Bourns® products and data sheets relating thereto are subject to change ^P[OV\[UV[PJL