EPS1D-F19-AE0024L

*R oH VE S CO AV R M AI SIO PL LA N IA BL S NT E Features ■ Incremental encoder / momentary push switch option ■ Long operating life ■ Sturdy construction ■ Snap-in mount EPS - Digital Contacting Encoder With Momentary Switch Option Electrical Characteristics Output...................................................................................2-bit quadrature code, Channel A leads Channel B by 90 º electrically turning clockwise (CW) Closed Circuit Resistance ........................................................................................................................................................................... 5 ohms maximum Open Circuit Resistance........................................................................................................................................................................500 K ohms minimum Contact Rating...................................................................................................................................................10 milliamp @ 10 VDC or 0.1 watt maximum Insulation Resistance (500 VDC) ................................................................................................................................................... 1,000 megohms minimum Dielectric Withstanding Voltage (MIL-STD-202 Method 301) Sea Level.............................................................................................................................................................................................1,000 VAC minimum Electrical Travel ..................................................................................................................................................................................................... Continuous Contact Bounce (15 RPM)................................................................................................................................................................ 5 milliseconds maximum RPM (Operating) 120 maximum Encoder Switching Configuration (applies to detented version only) .............................................................................................................. Normally Open Phase Tolerance (CH A to CH B).............................................................................................................................................................................90 ° ± 72 ° Environmental Characteristics Operating Temperature Range ....................................................................................................................................... +1 ºC to +85 ºC (+34 °F to +185 °F) Storage Temperature Range .......................................................................................................................................... -40 ºC to +85 ºC (-40 °F to +185 °F) Humidity..................................................................................................................................................................MIL-STD-202, Method 103B, Condition B Vibration ...........................................................................................................................................................................................................................15 G Contact Bounce ........................................................................................................................................................................... 0.1 millisecond maximum Shock................................................................................................................................................................................................................................50 G Contact Bounce ........................................................................................................................................................................... 0.1 millisecond maximum Rotational Life.................................................................................................................................................................................. 200,000 shaft revolutions Switch Life ....................................................................................................................................................................................................... 100,000 cycles IP Rating.......................................................................................................................................................................................................................... IP 40 Mechanical Characteristics Mechanical Angle .........................................................................................................................................................................................360 ° Continuous Running Torque ...............................................................................................................................................................0.5 to 1.5 N-cm (0.75 to 2.25 oz-in.) Mounting Torque.............................................................................................................................................................56 to 79 N-cm (5-7 lb.-in.) maximum Shaft Side Load (Static).................................................................................................................................................................. 4.53 kg (10 lbs.) minimum Weight .................................................................................................................................................................................Approximately 21 gms. (0.75 oz.) Terminals ..................................................................................................................................................................................Printed circuit board terminals Soldering Condition .................................................................... Recommended hand soldering using Sn95/Ag5 no clean solder, 0.025 ˝ wire diameter. Maximum temperature 399 °C (750 °F) for 5 seconds, no wash process to be used with no clean flux. Part can be wave soldered at 260 °C (500 °F) for 5 seconds, no wash process with no clean flux. Marking...............................................................................................................................................Manufacturer’s name and part number, and date code Hardware ....................................................... One lockwasher and one mounting nut supplied with each encoder, except where noted in the part number. Switch Characteristics Switch Type ...............................................................................................................................................................................Push Momentary, SPST N.O. Power Rating (Resistive Load) .................................................................................................................................................... 10 milliamps @ 12 volts DC Closed Switch Resistance ........................................................................................................................... Less than 200 ohms @ 440 gram force on shaft Switch Travel ................................................................................................................................................................................................... 2.25 ±0.25 mm Switch Actuation Force ............................................................................................................................................................... 370 ±70 grams (5 ±1 oz.-in.) Quadrature Output Table - This table is intended to show available outputs as currently defined. FULL CYCLE PER DETENT (Normally Open in Detent Shown) RECOMMENDED INCREMENTAL CONTROL DIAGRAM FOR USE WITH A DEBOUNCE CIRCUIT FULL CYCLE PER DETENT (Normally Open in Detent Shown) CW Channel A 7 9 (CUSTOMER LOGIC CIRCUITRY) DIRECTION Closed Circuit 5 ms DELAY DEBOUNCE (MC 14490) Open Circuit Closed Circuit DECODE LOGIC UP/DOWN COUNTER BINARY OUTPUT Open Circuit D D D Channel B D D WARNING Cancer and Reproductive Harm www.P65Warnings.ca.gov MAGNITUDE CCW *RoHS Directive 2015/863, Mar 31, 2015 and Annex. Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. EPS - Digital Contacting Encoder With Momentary Switch Option Product Dimensions SNAP-IN MOUNTING - S style bushing / F style shaft 15.2 (.598) 8.20 (.323) 19.0 (.748) 5.35 (.211) 2.00 (.079) 3.17 (.125) 4.01 (.158) DIA. 8.13 (.320) 4.800 (0.189) 1.60 (.063) 4.32 (.170) 26.97 (1.061) 2X x x x x 2.00 +0.5/-0.0 (.078 +.020/-0.0) TOTAL ACTUATION TRAVEL x 22.20 (.874) 7.50 (.300) 8.00 (.315) 9.00 (.354) PCB MOUNTING DIMENSIONS 2X 9.85 (.388) 2X 9.34 (.368) 4X 0.97 RADIUS (.038) 25.00 23.00 (.984) (.905) 24.33 (.958) 5.97 (.235) 2.50 DIA. (.098) 0.50 X 45 ° (.020) CHAMFER 2X 3.60 (.142) 2.70 2X DIA. (.106) 2.26 (.089) 3.97 (.156) CHAMFER 0.50 X 45 ° (.020) M9 X 0.25 (.010) 0.75 –6g (.030) 18.0 DIA. (.710) 10.50 22.20 DIA. DIA. (.413) (.874) 4.63 (.182) 6.50 (.260) PIN 1 1.06 (.042) 2.54 TYP (.100) 1.10 2X (.043) 0.80 2X (.031) 5X DIMENSIONS: 1 2 CHANNEL B 3 COMMON 4 CHANNEL A 5 TERMINAL PIN NO. MM (IN) TOLERANCES: EXCEPT WHERE NOTED .51 .13 DECIMALS: .XX ± .XXX ± (.020) (.005) Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. EPS - Digital Contacting Encoder With Momentary Switch Option How to Order PART NUMBERING SYSTEM E P S 1 D - F 1 9 - A E 0 0 3 6 L Encoder with Switch Option RoHS IDENTIFIER Code Description L Compliant Blank Non-Compliant BUSHING CONFIGURATION Code Description S 9 mm flatted x 5.35 mm length Threaded M9 x 0.75 SWITCH OPTION Code Description 1 Switch (Push Momentary) ANTI-ROTATION LUG POSITION Code Description D None SHAFT STYLE (See Outline Drawing for Details) Code Description F Flatted (4.8 mm Dia.) PERFORMANCE CODE Code Detents Cycles/Rev. E0006 0 6 E0009 0 9 E0012 0 12 E0024 0 24 E0036 0 36 D0024 24 24 HOUSING TERMINAL CONFIGURATION (X indicates “Equipped With” Code Features A B Terminal (Rear Mounting) X X Mounting Hardware Included X SHAFT LENGTH (FMS) Code Description 19 Length (19/32) Available Shaft Styles F Asia-Pacific: Tel: +886-2 2562-4117 • Email: asiacus@bourns.com Europe: Tel: +36 88 885 877 • Email: eurocus@bourns.com The Americas: Tel: +1-951 781-5500 • Email: americus@bourns.com www.bourns.com REV. 09/19 Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. Legal Disclaimer Notice This legal disclaimer applies to purchasers and users of Bourns® products manufactured by or on behalf of Bourns, Inc. and P[ZHɉSPH[LZJVSSLJ[P]LS`¸)V\YUZ¹ Unless otherwise expressly indicated in writing, Bourns® products and data sheets relating thereto are subject to change ^P[OV\[UV[PJL