P6SMB100CA-Q

GRADE ** HA *R oH S CO LO & MP LI GE AN N T FR EE AUTOMOTIVE Features Applications ■ Surface Mount SMB package ■ Protection of power buses ■ Breakdown Voltage: 6.8 to 250 volts ■ Protection of I/O interfaces ■ Power Dissipation: 600 watts ■ Overvoltage transient protection ■ RoHS compliant* and halogen free** ■ Telecom, computer, industrial and consumer electronics applications ■ AEC-Q101 compliant*** P6SMB-Q Transient Voltage Suppressor Diode Series General Information Additional Information The markets of portable communications, computing and video equipment are challenging the semiconductor industry to develop increasingly smaller electronic components. Click these links for more information: Bourns offers Transient Voltage Suppressor Diodes for surge and ESD protection applications, in compact chip package DO-214AA (SMB) size format. The Transient Voltage Suppressor series offers a choice of Breakdown Voltages from 6.8 V up to 250 V. Typical fast response times are less than 1.0 picosecond for unidirectional devices and less than 5.0 picoseconds for bidirectional devices from 0 V to Minimum Breakdown Voltage. PRODUCT TECHNICAL INVENTORY SAMPLES SELECTOR LIBRARY CONTACT Bourns® Chip Diodes conform to JEDEC standards, are easy to handle with standard pick and place equipment and the flat configuration minimizes roll away. Maximum Characteristics (@ TA = 25 °C Unless Otherwise Noted) Parameter Symbol Value Unit Peak Pulse Power Dissipation (TP = 1 ms) (Note 1,2) PPK 600 Watts Peak Forward Surge Current 8.3 ms Single Half Sine Wave Superimposed on Rated Load (JEDEC Method) (Note 3) IFSM 100 Amps Maximum Instantaneous Forward Voltage @ IPP = 50 A (For Unidirectional Units Only) VF 3.5 Volts Operating Temperature Range TJ -55 to +150 °C TSTG -55 to +150 °C Storage Temperature Range 1. 2. 3. Non-repetitive current pulse, per Pulse Waveform graph and derated above TA = 25 °C per Pulse Derating Curve. Thermal Resistance Junction to Lead. 8.3 ms Single Half-Sine Wave duty cycle = 4 pulses maximum per minute (unidirectional units only). How to Order P6SMB 15 CA - Q Asia-Pacific: Tel: +886-2 2562-4117 • Email: asiacus@bourns.com EMEA: Tel: +36 88 885 877 • Email: eurocus@bourns.com The Americas: Tel: +1-951 781-5500 • Email: americus@bourns.com www.bourns.com Series P6SMB= SMB/DO-214AA Breakdown Voltage 6.8 to 250 = 6.8 to 250 VBR (Volts) Suffix A = 5 % Tolerance Unidirectional Device CA = 5 % Tolerance Bidirectional Device AEC-Q101 Suffix Q = AEC-Q101 Compliant, 13-inch Reel (3000 pcs.) WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov * RoHS Directive 2015/863, Mar 31, 2015 and Annex. ** Bourns considers a product to be “halogen free” if (a) the Bromine (Br) content is 900 ppm or less; (b) the Chlorine (Cl) content is 900 ppm or less; and (c) the total Bromine (Br) and Chlorine (Cl) content is 1500 ppm or less. *** Q suffix for applications requiring appropriate AEC-Q101 compliance for electronic limiters. Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. P6SMB-Q Transient Voltage Suppressor Diode Series Electrical Characteristics (@ TA = 25 °C Unless Otherwise Noted) Unidirectional Device Bidirectional Device Working Maximum Breakdown Voltage Peak Reverse VBR (Volts) Reverse Leakage Voltage @ VRWM Part No. Marking Part No. Marking Min. @ IT Max. (mA) P6SMB6.8A-Q P6SMB7.5A-Q P6SMB8.2A-Q P6SMB9.1A-Q P6SMB10A-Q P6SMB11A-Q P6SMB12A-Q P6SMB13A-Q P6SMB15A-Q P6SMB16A-Q P6SMB18A-Q P6SMB20A-Q P6SMB22A-Q P6SMB24A-Q P6SMB27A-Q P6SMB30A-Q P6SMB33A-Q P6SMB36A-Q P6SMB39A-Q P6SMB43A-Q P6SMB47A-Q P6SMB51A-Q P6SMB56A-Q P6SMB62A-Q P6SMB68A-Q P6SMB75A-Q P6SMB82A-Q P6SMB91A-Q P6SMB100A-Q P6SMB110A-Q P6SMB120A-Q P6SMB130A-Q P6SMB150A-Q P6SMB160A-Q P6SMB170A-Q P6SMB180A-Q P6SMB200A-Q P6SMB220A-Q P6SMB250A-Q 6V8AQ 7V5AQ 8V2AQ 9V1AQ 10AQ 11AQ 12AQ 13AQ 15AQ 16AQ 18AQ 20AQ 22AQ 24AQ 27AQ 30AQ 33AQ 36AQ 39AQ 43AQ 47AQ 51AQ 56AQ 62AQ 68AQ 75AQ 82AQ 91AQ 100AQ 110AQ 120AQ 130AQ 150AQ 160AQ 170AQ 180AQ 200AQ 220AQ 250AQ P6SMB6.8CA-Q P6SMB7.5CA-Q P6SMB8.2CA-Q P6SMB9.1CA-Q P6SMB10CA-Q P6SMB11CA-Q P6SMB12CA-Q P6SMB13CA-Q P6SMB15CA-Q P6SMB16CA-Q P6SMB18CA-Q P6SMB20CA-Q P6SMB22CA-Q P6SMB24CA-Q P6SMB27CA-Q P6SMB30CA-Q P6SMB33CA-Q P6SMB36CA-Q P6SMB39CA-Q P6SMB43CA-Q P6SMB47CA-Q P6SMB51CA-Q P6SMB56CA-Q P6SMB62CA-Q P6SMB68CA-Q P6SMB75CA-Q P6SMB82CA-Q P6SMB91CA-Q P6SMB100CA-Q P6SMB110CA-Q P6SMB120CA-Q P6SMB130CA-Q P6SMB150CA-Q P6SMB160CA-Q P6SMB170CA-Q P6SMB180CA-Q P6SMB200CA-Q P6SMB220CA-Q P6SMB250CA-Q 6V8CQ 7V5CQ 8V2CQ 9V1CQ 10CQ 11CQ 12CQ 13CQ 15CQ 16CQ 18CQ 20CQ 22CQ 24CQ 27CQ 30CQ 33CQ 36CQ 39CQ 43CQ 47CQ 51CQ 56CQ 62CQ 68CQ 75CQ 82CQ 91CQ 100CQ 110CQ 120CQ 130CQ 150CQ 160CQ 170CQ 180CQ 200CQ 220CQ 250CQ 6.45 7.13 7.79 8.65 9.5 10.5 11.4 12.4 14.3 15.2 17.1 19 20.9 22.8 25.7 28.5 31.4 34.2 37.1 40.9 44.7 48.5 53.2 58.9 64.6 71.3 77.9 86.5 95 105 114 124 143 152 162 171 190 209 237 7.14 7.88 8.61 9.55 10.5 11.6 12.6 13.7 15.8 16.8 18.9 21 23.1 25.2 28.4 31.5 34.7 37.8 41 45.2 49.4 53.6 58.8 65.1 71.4 78.8 86.1 95.5 105 116 126 137 158 168 179 189 210 231 263 10 10 10 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Maximum Maximum Maximum Maximum Clamping Peak Clamping Peak Voltage Pulse Voltage Pulse @ Ipp Current @ Ipp Current (10/1000 μs) (10/1000 μs) (8/20 μs) (8/20 μs) VRWM (V) IR (μA) Vc (V) Ipp (A) Vc (V) Ipp (A) 5.8 6.4 7.02 7.78 8.55 9.4 10.2 11.1 12.8 13.6 15.3 17.1 18.8 20.5 23.1 25.6 28.2 30.8 33.3 36.8 40.2 43.6 47.8 53 58.1 64.1 70.1 77.8 85.5 94 102 111 128 136 145 154 171 185 214 1000 500 200 50 10 5 5 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 10.5 11.3 12.1 13.4 14.5 15.6 16.7 18.2 21.2 22.5 25.5 27.7 30.6 33.2 37.5 41.4 45.7 49.9 53.9 59.3 64.8 70.1 77 85 92 103 113 125 137 152 165 179 207 219 234 246 274 328 344 58.1 54 50.4 45.5 42.1 39.1 36.5 33.5 28.8 27.1 24.2 22 19.9 18.4 16.3 14.7 13.3 12.2 11.3 10.3 9.4 8.7 7.9 7.2 6.6 5.9 5.4 4.9 4.5 4 3.7 3.4 2.9 2.8 2.6 2.5 2.2 1.9 1.8 13.7 15 15.7 17.4 18.9 20.3 21.7 23.7 27.6 29.3 33.2 36 39.8 43.2 48.8 53.8 59.4 64.9 70.1 77.1 84.2 91.1 100.1 110.5 119.6 133.9 146.9 162.5 178.1 198 214.5 232.7 269.1 284.7 304.2 319.8 356.2 426.4 447.2 290.5 270 252.0 227.5 210.5 195.5 182.5 167.5 144.0 135.5 121.0 110 99.5 92.0 81.5 73.5 66.5 61.0 56.5 51.5 47.0 43.5 39.5 36.0 33.0 29.5 27.0 24.5 22.5 20 18.5 17.0 14.5 14.0 13.0 12.5 11.0 9.5 9.0 Notes: 1. Suffix ‘A’ denotes a 5 % tolerance unidirectional device. 2. Suffix ‘CA’ denotes a 5 % tolerance bidirectional device. Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. P6SMB-Q Transient Voltage Suppressor Diode Series Rating & Characteristic Curves Pulse Derating Curve Maximum Non-Repetitive Surge Current Peak Forward Surge Current (Amps) Peak Pulse Derating in Percent of Peak Power or Current 100 75 50 25 120 100 80 60 40 0 0 25 0 50 75 100 125 150 175 Pulse Width 8.3 ms Single Half Sine-Wave 20 200 1 2 5 Ambient Temperature (°C) Pulse Waveform 20 50 100 Typical Junction Capacitance 10000 TR=10 µs Unidirectional V = 0 V Peak value (IRSM) Half value= IRSM 2 CJ - Junction Capacitance (pF) 100 IP, Peak Pulse Current (%) 10 Number of Cycles at 60 Hz Pulse width (TP) is defined as that point where the peak current decays to 50 % of IPSM. 50 10 x 1000 waveform as defined by R.E.A. TA=25 °C TP Bidirectional V = 0 V 1000 Unidirectional @VR 100 10 T = 25 ° C f = 1.0 MHz Vsig = 50 mVp-p 0 0 1.0 2.0 3.0 4.0 1 T, Time (ms) Bidirectional @VR 1 10 100 1000 V BR - Reverse Breakdown Voltage (V) Pulse Rating Curve Steady State Power Derating Curve 5.0 RM(AV) Steady State Power Dissipation (W) 100 PP, Peak Power (KW) TA = 25 °C Non-repetitive Pulse Waveform Shown in Pulse Waveform Graph 10 1.0 0.1 0.1 µs 1.0 µs 10 µs 100 µs TP, Pulse Width 1.0 ms 10 ms 4.0 3.0 2.0 1.0 60 Hz Resistive or Inductive Load 0.0 0 25 50 75 100 125 150 175 200 TL, Lead Temperature (°C) Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. P6SMB-Q Transient Voltage Suppressor Diode Series Product Dimensions Recommended Footprint CATHODE BAND (FOR UNIDIRECTIONAL PRODUCTS ONLY) a A B b C c G Dimension a (Max.) F H D b (Min.) E c (Min.) Dimension A B C D E F G H SMB (DO-214AA) 4.06 - 4.57 (0.160 - 0.180) 3.30 - 3.94 (0.130 - 0.155) 1.95 - 2.20 (0.077 - 0.087) 0.15 - 0.31 (0.006 - 0.012) 5.21 - 5.59 (0.205 - 0.220) 0.203 MAX. (0.008) 2.13 - 2.44 (0.084 - 0.096) 0.76 - 1.52 (0.030 - 0.060) DIMENSIONS: MM (INCHES) SMB (DO-214AA) 2.69 (0.106) 2.10 (0.083) 1.27 (0.050) DIMENSIONS: MM (INCHES) Physical Specifications Case ............................................ Molded plastic per UL Class 94V-0 Polarity.........................Cathode band indicates unidirectional device No cathode band indicates bidirectional device Environmental Specifications Moisture Sensitivity Level ................................................................. 1 ESD Classification (HBM)...............................................................3B Typical Part Marking MANUFACTURER’S TRADEMARK YWW XXXXX DATE CODE: Y = LAST DIGIT OF YEAR WW = WEEK NUMBER DEVICE ID Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. P6SMB-Q Transient Voltage Suppressor Diode Series Packaging Information The product will be dispensed in tape and reel format (see diagram below). P 0 P 1 d T E Index Hole 120 ° F D2 W B D1 D P Trailer ....... ....... nd A Unidirectional Product Orientation ....... ....... C Leader Device ....... ....... ....... ....... 10 pitches (min.) W1 Start DIMENSIONS: 10 pitches (min.) Devices are packed in accordance with EIA standard RS-481-A and specifications shown here. Direction of Feed Item Symbol Carrier Width A Carrier Length B Carrier Depth C Sprocket Hole d Reel Outside Diameter D Reel Inner Diameter D1 Feed Hole Diameter D2 Sprocket Hole Position E Punch Hole Position F Punch Hole Pitch P Sprocket Hole Pitch P0 Embossment Center P1 Overall Tape Thickness T Tape Width W Reel Width W1 Quantity per Reel MM (INCHES) -- SMB (DO-214AA) 13-Inch Reel 3.67 ± 0.20 (0.144 ± 0.008) 5.60 ± 0.20 (0.220 ± 0.008) 2.57 ± 0.20 (0.101 ± 0.008) 1.50 ± 0.10 (0.059 ± 0.004) 330 (12.992) 50.0 MIN. (1.969) 13.0 ± 0.20 (0.512 ± 0.008) 1.75 ± 0.10 (0.069 ± 0.004) 5.50 ± 0.05 (0.217 ± 0.002) 8.00 ± 0.10 (0.315 ± 0.004) 4.00 ± 0.10 (0.157 ± 0.004) 2.00 ± 0.05 (0.079 ± 0.002) 0.30 ± 0.10 (0.012 ± 0.004) 12.00 ± 0.30 (0.472 ± 0.012) 18.4 MAX. (0.724) 3000 REV. 10/20 Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. Legal Disclaimer Notice This legal disclaimer applies to purchasers and users of Bourns® products manufactured by or on behalf of Bourns, Inc. and P[ZHɉSPH[LZJVSSLJ[P]LS`¸)V\YUZ¹ Unless otherwise expressly indicated in writing, Bourns® products and data sheets relating thereto are subject to change ^P[OV\[UV[PJL