P6SMB22CA

CO LO & MP LI GE AN N T FR EE *R oH S ** HA Features Applications ■ RoHS compliant* and halogen free** ■ IEC 61000-4-2 ESD (Min. Level 4) ■ Surface Mount SMB package ■ IEC 61000-4-4 EFT ■ Breakdown Voltage: 6.8 to 550 volts ■ IEC 61000-4-5 Surge ■ Peak Pulse Power: 600 watts ■ Typical temperature coefficient: ΔVBR = 0.1 % x VBR @ 25 °C x ΔT P6SMB Transient Voltage Suppressor Diode Series General Information Additional Information The markets of portable communications, computing and video equipment are challenging the semiconductor industry to develop increasingly smaller electronic components. Click these links for more information: Bourns offers Transient Voltage Suppressor Diodes for surge and ESD protection applications, in compact chip package DO-214AA (SMB) size format. The Transient Voltage Suppressor series offers a choice of Breakdown Voltages from 6.8 V up to 550 V. Typical fast response times are less than 1.0 picosecond for unidirectional devices and less than 5.0 picoseconds for bidirectional devices from 0 V to Minimum Breakdown Voltage. PRODUCT TECHNICAL INVENTORY SAMPLES SELECTOR LIBRARY CONTACT Bourns® Chip Diodes conform to JEDEC standards, are easy to handle with standard pick and place equipment and the flat configuration minimizes roll away. Maximum Characteristics (@ TA = 25 °C Unless Otherwise Noted) Parameter Symbol Value Unit Peak Pulse Power Dissipation (TP = 1 ms) (Note 1,2) PPK 600 Watts Peak Forward Surge Current 8.3 ms Single Half Sine Wave Superimposed on Rated Load (JEDEC Method) (Note 3) IFSM 100 Amps VF 3.5 5.0 Volts TJ -55 to +150 °C TSTG -55 to +150 °C Maximum Instantaneous Forward Voltage @ IPP = 50 A (For Unidirectional Units Only) P6SMB6.8A ~ P6SMB200A P6SMB220A ~ P6SMB550A Operating Temperature Range Storage Temperature Range 1. 2. 3. Non-repetitive current pulse, per Pulse Waveform graph and derated above TA = 25 °C per Pulse Derating Curve. Thermal Resistance Junction to Lead. 8.3 ms Single Half-Sine Wave duty cycle = 4 pulses maximum per minute (unidirectional units only). How to Order P6SMB 6.8 CA - H Asia-Pacific: Tel: +886-2 2562-4117 • Email: asiacus@bourns.com EMEA: Tel: +36 88 885 877 • Email: eurocus@bourns.com The Americas: Tel: +1-951 781-5500 • Email: americus@bourns.com www.bourns.com Series P6SMB= SMB/DO-214AA Breakdown Voltage 6.8 to 550 = 6.8 to 550 VBD (Volts) Suffix A = 5 % Tolerance Unidirectional Device CA = 5 % Tolerance Bidirectional Device Reel (blank) = 13 inch reel -H = 7 inch reel WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov * RoHS Directive 2015/863, Mar 31, 2015 and Annex. ** Bourns considers a product to be “halogen free” if (a) the Bromine (Br) content is 900 ppm or less; (b) the Chlorine (Cl) content is 900 ppm or less; and (c) the total Bromine (Br) and Chlorine (Cl) content is 1500 ppm or less. Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. P6SMB Transient Voltage Suppressor Diode Series Electrical Characteristics (@ TA = 25 °C Unless Otherwise Noted) Unidirectional Device Bidirectional Device Breakdown Voltage VBR (Volts) Part No. Marking Part No. Marking Min. Max. @ IT (mA) P6SMB6.8A P6SMB7.5A P6SMB8.2A P6SMB9.1A P6SMB10A P6SMB11A P6SMB12A P6SMB13A P6SMB15A P6SMB16A P6SMB18A P6SMB20A P6SMB22A P6SMB24A P6SMB27A P6SMB30A P6SMB33A P6SMB36A P6SMB39A P6SMB43A P6SMB47A P6SMB51A P6SMB56A P6SMB62A P6SMB68A P6SMB75A P6SMB82A P6SMB91A P6SMB100A P6SMB110A P6SMB120A P6SMB130A P6SMB150A P6SMB160A P6SMB170A P6SMB180A P6SMB200A P6SMB220A P6SMB250A P6SMB300A P6SMB350A P6SMB400A P6SMB440A P6SMB480A P6SMB510A P6SMB530A P6SMB540A P6SMB550A 6V8A 7V5A 8V2A 9V1A 10A 11A 12A 13A 15A 16A 18A 20A 22A 24A 27A 30A 33A 36A 39A 43A 47A 51A 56A 62A 68A 75A 82A 91A 100A 110A 120A 130A 150A 160A 170A 180A 200A 220A 250A 300A 350A 400A 440A 480A 510A 530A 540A 550A P6SMB6.8CA P6SMB7.5CA P6SMB8.2CA P6SMB9.1CA P6SMB10CA P6SMB11CA P6SMB12CA P6SMB13CA P6SMB15CA P6SMB16CA P6SMB18CA P6SMB20CA P6SMB22CA P6SMB24CA P6SMB27CA P6SMB30CA P6SMB33CA P6SMB36CA P6SMB39CA P6SMB43CA P6SMB47CA P6SMB51CA P6SMB56CA P6SMB62CA P6SMB68CA P6SMB75CA P6SMB82CA P6SMB91CA P6SMB100CA P6SMB110CA P6SMB120CA P6SMB130CA P6SMB150CA P6SMB160CA P6SMB170CA P6SMB180CA P6SMB200CA P6SMB220CA P6SMB250CA P6SMB300CA P6SMB350CA P6SMB400CA P6SMB440CA P6SMB480CA P6SMB510CA P6SMB530CA P6SMB540CA P6SMB550CA 6V8C 7V5C 8V2C 9V1C 10C 11C 12C 13C 15C 16C 18C 20C 22C 24C 27C 30C 33C 36C 39C 43C 47C 51C 56C 62C 68C 75C 82C 91C 100C 110C 120C 130C 150C 160C 170C 180C 200C 220C 250C 300C 350C 400C 440C 480C 510C 530C 540C 550C 6.45 7.13 7.79 8.65 9.5 10.5 11.4 12.4 14.3 15.2 17.1 19 20.9 22.8 25.7 28.5 31.4 34.2 37.1 40.9 44.7 48.5 53.2 58.9 64.6 71.3 77.9 86.5 95 105 114 124 143 152 162 171 190 209 237 285 332 380 418 456 485 503.5 513 522.5 7.14 7.88 8.61 9.55 10.5 11.6 12.6 13.7 15.8 16.8 18.9 21 23.1 25.2 28.4 31.5 34.7 37.8 41 45.2 49.4 53.6 58.8 65.1 71.4 78.8 86.1 95.5 105 116 126 137 158 168 179 189 210 231 263 315 368 420 462 504 535 556.5 567 577.5 10 10 10 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Working Peak Reverse Voltage Maximum Maximum Maximum Maximum Maximum Clamping Peak Clamping Peak Reverse Voltage Pulse Voltage Pulse Leakage @ Ipp Current @ Ipp Current @ VRWM (10/1000 μs) (10/1000 μs) (8/20 μs) (8/20 μs) VRWM (V) IR (μA) Vc (V) Ipp (A) Vc (V) Ipp (A) 5.8 6.4 7.02 7.78 8.55 9.4 10.2 11.1 12.8 13.6 15.3 17.1 18.8 20.5 23.1 25.6 28.2 30.8 33.3 36.8 40.2 43.6 47.8 53 58.1 64.1 70.1 77.8 85.5 94 102 111 128 136 145 154 171 185 214 256 300 342 376 408 434 477 486 495 1000 500 200 50 10 5 5 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 10.5 11.3 12.1 13.4 14.5 15.6 16.7 18.2 21.2 22.5 25.5 27.7 30.6 33.2 37.5 41.4 45.7 49.9 53.9 59.3 64.8 70.1 77 85 92 103 113 125 137 152 165 179 207 219 234 246 274 328 344 414 482 548 602 658 698 725 740 760 58.1 54 50.4 45.5 42.1 39.1 36.5 33.5 28.8 27.1 24.2 22 19.9 18.4 16.3 14.7 13.3 12.2 11.3 10.3 9.4 8.7 7.9 7.2 6.6 5.9 5.4 4.9 4.5 4 3.7 3.4 2.9 2.8 2.6 2.5 2.2 1.9 1.8 1.5 1.3 1.1 1 0.9 0.9 0.8 0.8 0.8 13.7 15 15.7 17.4 18.9 20.3 21.7 23.7 27.6 29.3 33.2 36 39.8 43.2 48.8 53.8 59.4 64.9 70.1 77.1 84.2 91.1 100.1 110.5 119.6 133.9 146.9 162.5 178.1 198 214.5 232.7 269.1 284.7 304.2 319.8 356.2 426.4 447.2 538.2 626.6 712.4 783 855.4 907.4 942.5 962.0 988.0 290.5 270 252.0 227.5 210.5 195.5 182.5 167.5 144.0 135.5 121.0 110 99.5 92.0 81.5 73.5 66.5 61.0 56.5 51.5 47.0 43.5 39.5 36.0 33.0 29.5 27.0 24.5 22.5 20 18.5 17.0 14.5 14.0 13.0 12.5 11.0 9.5 9.0 7.5 6.5 5.5 5 4.6 4.3 4.1 4.1 3.9 Notes: 1. Suffix ‘A’ denotes a 5 % tolerance unidirectional device. 2. Suffix ‘CA’ denotes a 5 % tolerance bidirectional device. 3. For bidirectional devices with a VR of 10 volts or less, the IR limit is double. Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. P6SMB Transient Voltage Suppressor Diode Series Rating & Characteristic Curves Pulse Derating Curve Maximum Non-Repetitive Surge Current Peak Forward Surge Current (Amps) Peak Pulse Derating in Percent of Peak Power or Current 100 75 50 25 120 100 80 60 40 0 0 25 0 50 75 100 125 150 175 Pulse Width 8.3 ms Single Half Sine-Wave 20 200 1 2 5 10 20 50 100 Number of Cycles at 60 Hz Ambient Temperature (°C) Pulse Waveform Typical Junction Capacitance 10000 TR=10 µs Half value= CJ - Junction Capacitance (pF) IP, Peak Pulse Current (%) Unidirectional V = 0 V Peak value (IRSM) 100 IRSM 2 Pulse width (TP) is defined as that point where the peak current decays to 50 % of IPSM. 50 10 x 1000 waveform as defined by R.E.A. TA=25 °C TP Bidirectional V = 0 V 1000 Unidirectional @VR 100 10 T = 25 ° C f = 1.0 MHz Vsig = 50 mVp-p 0 0 2.0 1.0 3.0 4.0 1 T, Time (ms) Bidirectional @VR 1 10 100 1000 V BR - Reverse Breakdown Voltage (V) Pulse Rating Curve Steady State Power Derating Curve 100 RM(AV) Steady State Power Dissipation (W) 5.0 PP, Peak Power (KW) TA = 25 °C Non-repetitive Pulse Waveform Shown in Pulse Waveform Graph 10 1.0 0.1 0.1 µs 1.0 µs 10 µs 100 µs TP, Pulse Width 1.0 ms 10 ms 4.0 3.0 2.0 1.0 60 Hz Resistive or Inductive Load 0.0 0 25 50 75 100 125 150 175 200 TL, Lead Temperature (°C) Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. P6SMB Transient Voltage Suppressor Diode Series Product Dimensions Recommended Footprint CATHODE BAND A A (FOR UNIDIRECTIONAL PRODUCTS ONLY) B C B C F Dimension a (Max.) E G D Dimension A B C D E F G b (Min.) SMB (DO-214AA) 4.06 - 4.57 (0.160 - 0.180) 3.30 - 3.94 (0.130 - 0.155) 1.95 - 2.20 (0.077 - 0.087) 5.21 - 5.59 (0.205 - 0.220) 0.05 - 0.203 (0.002 - 0.008) 2.13 - 2.44 (0.084 - 0.096) 0.76 - 1.52 (0.030 - 0.060) DIMENSIONS: c (Min.) SMB (DO-214AA) 2.69 (0.106) 2.10 (0.083) 1.27 (0.050) DIMENSIONS: MM (INCHES) Physical Specifications Case ............................................ Molded plastic per UL Class 94V-0 Polarity.........................Cathode band indicates unidirectional device No cathode band indicates bidirectional device Environmental Specifications Moisture Sensitivity Level ................................................................. 1 ESD Classification (HBM)...............................................................3B MM (INCHES) Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. P6SMB Transient Voltage Suppressor Diode Series Packaging Information The product will be dispensed in tape and reel format (see diagram below). P 0 P 1 d T E Index Hole 120 ° F D2 W B D1 D P Trailer ....... ....... End A Unidirectional Product Orientation C Device ....... ....... ....... ....... Leader ....... ....... W1 Start DIMENSIONS: 10 pitches (min.) 10 pitches (min.) Direction of Feed Item Symbol Carrier Width A Carrier Length B Carrier Depth C Sprocket Hole d Reel Outside Diameter D Reel Inner Diameter D1 Feed Hole Diameter D2 Sprocket Hole Position E Punch Hole Position F Punch Hole Pitch P Sprocket Hole Pitch P0 Embossment Center P1 Overall Tape Thickness T Tape Width W Reel Width W1 Quantity per Reel -- MM (INCHES) Devices are packed in accordance with EIA standard RS-481-A and specifications shown here. SMB (DO-214AA) 7 Inch Reel 13 Inch Reel 3.67 ± 0.20 (0.144 ± 0.008) 5.60 ± 0.20 (0.220 ± 0.008) 2.57 ± 0.20 (0.101 ± 0.008) 1.50 ± 0.10 (0.059 ± 0.004) 178 330 (7.008) (12.992) 50.0 MIN. (1.969) 13.0 ± 0.20 (0.512 ± 0.008) 1.75 ± 0.10 (0.069 ± 0.004) 5.50 ± 0.05 (0.217 ± 0.002) 8.00 ± 0.10 (0.315 ± 0.004) 4.00 ± 0.10 (0.157 ± 0.004) 2.00 ± 0.05 (0.079 ± 0.002) 0.30 ± 0.10 (0.012 ± 0.004) 12.00 ± 0.30 (0.472 ± 0.012) 18.4 MAX. (0.724) 500 3,000 REV. 03/20 Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. Legal Disclaimer Notice This legal disclaimer applies to purchasers and users of Bourns® products manufactured by or on behalf of Bourns, Inc. and P[ZHɉSPH[LZJVSSLJ[P]LS`¸)V\YUZ¹ Unless otherwise expressly indicated in writing, Bourns® products and data sheets relating thereto are subject to change ^P[OV\[UV[PJL