PM3700-80RC

PL IA N T Features Applications CO M ■ Formerly model *R oH S ■ Current rating up to 7 A ■ Filtering ■ Common mode ■ Compact size ■ Tape and reel packaging ■ RoHS compliant* PM3700 Series - SMD Common Mode Choke Inductance mH Min. Typical Frequency Range with 20 dB Atten. @ 1 kHz / 50 mV Part Marking DCR (Ω) Max. Irms (A) Leakage Inductance (μH) Typ. PM3700-10-RC 0.2 201 0.008 7.0 1.6 PM3700-20-RC 0.5 501 0.010 6.0 2.2 4 - 40 MHz PM3700-30-RC 0.75 751 0.012 5.5 2.9 1 - 20 MHz PM3700-40-RC 1.0 102 0.020 4.0 3.9 500 KHz - 40 MHz PM3700-50-RC 2.0 202 0.030 3.5 0.3 300 KHz - 20 MHz PM3700-60-RC 5.0 502 0.070 2.0 0.4 100 KHz - 10 MHz PM3700-70-RC 10 103 0.150 1.5 0.5 50 KHz - 5 MHz PM3700-80-RC 20 203 0.250 1.0 0.7 25 KHz - 4 MHz Bourns Part No. 5 - 55 MHz Temperature Rise ... 35 °C typical at Irms Operating Temperature .. -55 °C to +125 °C Storage Temperature ................................ -55 °C to +125 °C Soldering .......... 245 °C, 5 seconds max. Dielectric Strength ................... 500 Vrms between windings Moisture Sensitivity Level ..................... 1 ................. N/A Materials Core .............................................. Ferrite Wire ................. Polyester-coated copper Terminal Coating............. Sn-Ag-Cu alloy Packaging ........200 pcs. per 13-inch reel Product Dimensions Schematic 3 2 21.6 ± 0.3 (0.850 ± 0.012) 3 4.0 (0.157) TYP. 4 Temperature (°C) 4 1 2 XXX SEE ‘PART MARKING’ COLUMN OF ELECTRICAL SPECIFICATIONS Temperature Rising Area Preheat Area Reflow Area ±4.0 °C/sec. max. 150 ~ 200 °C / 60 - 120 sec. +3.0 °C/ sec. max. 1.91 (0.075) 1 POLARITY MARK 17.78 (0.70) Forced Cooling Area 1.0~5.0 °C/sec. max. PeakTemperature: 250 °C 250 200 60~150 sec.max. 150 11.43 (0.45) MAX. 217 °C 60 sec.max. Recommended Pad Layout 60~120 sec.max. 100 3.18 (0.125) 3.18 (0.125) 50 0 50 100 150 200 250 Time (Seconds) Peak Temperature: 245 ° ±5 °C max., 30 sec. max. Maximum Time Above 217 °C: 60~150 seconds WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov * RoHS Directive 2002/95/EC Jan. 27, 2003 including annex and RoHS Recast 2011/65/EU June 8, 2011. Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf 21.59 (0.850) 21.59 (0.850) DIMENSIONS: MM (INCHES) Legal Disclaimer Notice This legal disclaimer applies to purchasers and users of Bourns® products manufactured by or on behalf of Bourns, Inc. and P[ZHɉSPH[LZJVSSLJ[P]LS`¸)V\YUZ¹ Unless otherwise expressly indicated in writing, Bourns® products and data sheets relating thereto are subject to change ^P[OV\[UV[PJL