PM610-02-RC

PL IA NT CO M Features Applications ■ Formerly ■ Inductors: Buck-boost, coupled, filtering, *R oH S ■ ■ ■ ■ model Six windings - multiple configurations Compact size Tape and reel packaging RoHS compliant* common mode ■ Transformers: Flyback, push-pull, inverter, gate drive, isolation PM600/PM610/PM620 Series - SMD Inductor/Transformer Electrical Specifications Bourns Part No. PM600-01-RC PM600-02-RC PM600-03-RC PM600-04-RC PM600-05-RC PM600-06-RC PM600-07-RC PM600-08-RC PM600-09-RC PM600-10-RC PM610-01-RC PM610-02-RC PM610-03-RC PM610-04-RC PM610-05-RC PM610-06-RC PM610-07-RC PM610-08-RC PM610-09-RC PM610-10-RC PM620-01-RC PM620-02-RC PM620-03-RC PM620-04-RC PM620-05-RC PM620-06-RC PM620-07-RC PM620-08-RC PM620-09-RC PM620-10-RC PM620-11-RC PM620-12-RC Inductance 100 KHz (μH) 201.6 89.6 27.4 12.2 14.7 6.5 10.9 4.9 8.5 3.8 160.0 78.4 21.6 10.6 11.6 5.7 8.3 4.1 6.6 3.2 160.6 77.0 131.8 63.2 23.3 11.2 14.2 6.8 9.3 4.5 7.9 3.8 Tol. (%) ±30 ±30 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±30 ±30 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±30 ±30 ±20 ±20 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 DCR (Ω) Max. 0.324 0.137 0.324 0.137 0.324 0.137 0.324 0.137 0.324 0.137 0.202 0.094 0.202 0.094 0.202 0.094 0.202 0.094 0.202 0.094 0.094 0.065 0.094 0.065 0.094 0.065 0.094 0.065 0.094 0.065 0.094 0.065 Isat (A) 0.02 0.03 0.31 0.47 0.58 0.87 0.88 1.32 1.23 1.85 0.04 0.06 0.67 0.96 1.30 1.86 2.00 2.86 2.30 3.29 0.03 0.04 0.08 0.12 0.36 0.52 0.76 1.10 1.11 1.60 1.40 2.02 Irms (A) 0.46 0.71 0.46 0.71 0.46 0.71 0.46 0.71 0.46 0.71 0.68 1.00 0.68 1.00 0.68 1.00 0.68 1.00 0.68 1.00 1.28 1.54 1.28 1.54 1.28 1.54 1.28 1.54 1.28 1.54 1.28 1.54 ET (VmS) ET (VmS) Based on Based on Core 40 °C Rise Saturation (260 KHz) 16.8 103.2 11.2 68.8 16.8 103.2 11.2 68.8 16.8 103.2 11.2 68.8 16.8 103.2 11.2 68.8 16.8 103.2 11.2 68.8 21.0 130 14.7 91 21.0 130 14.7 91 21.0 130 14.7 91 21.0 130 14.7 91 21.0 130 14.7 91 20.8 130 14.4 90 20.8 130 14.4 90 20.8 130 14.4 90 20.8 130 14.4 90 20.8 130 14.4 90 20.8 130 14.4 90 General Specifications Rated Current ....... Ind. drop of 30 % typ. ...................................................at Isat Temperature Rise ... 40 °C typical at Irms Operating Temperature ................................ -40 °C to +105 °C Storage Temperature ................................ -40 °C to +105 °C Soldering .......... 245 °C, 5 seconds max. Dielectric Strength ................... 500 Vrms between windings Materials Core ..............................................Ferrite Wire ........... Polyurethane-coated copper Terminal Coating............. Sn-Ag-Cu alloy Packaging PM600 ..........600 pcs. per 13-inch reel PM610 ..........300 pcs. per 13-inch reel PM620 ..........200 pcs. per 13-inch reel Single or multi-windings in parallel. ET of multiple winding in series is number of windings times value of ET. WARNING Cancer and Reproductive Harm www.P65Warnings.ca.gov *RoHS Directive 2002/95/EC Jan. 27, 2003 including annex and RoHS Recast 2011/65/EU June 8, 2011. Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. PM600/PM610/PM620 Series - SMD Inductor/Transformer Typical Configurations Inductor: Basic Diagram Inductance: L Current: I Figure 1 Inductance: 36 x L Current: I Figure 5 Inductance: 4 x L Current: 3xI Figure 6 Inductance: L Current: 6xI Figure 2 Inductance: 25 x L Current: I Figure 3 Inductance: 16 x L Current: I Figure 4 Inductance: 9 x L Current: 2xI Transformer: Basic Diagram Turns Ratio: 1:1:1:1:1:1 Figure 1 Turns Ratio: 1:1 Figure 2 Turns Ratio: 1:1:1 Figure 3 Turns Ratio: 1:5 or 5:1 Figure 4 Turns Ratio: 1:4 or 4:1 Figure 5 Turns Ratio: 1:3 or 3:1 Figure 6 Turns Ratio: 1:2 or 2:1 Figure 7 Turns Ratio: 4:1:1 Figure 8 Turns Ratio: 3:1:1:1 Figure 9 Turns Ratio: 2:3 or 3:2 Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. PM600/PM610/PM620 Series - SMD Inductor/Transformer Product Dimensions PM600 Series MARK PIN #1 1.0 (.039) TYP. 0.7 TYP. (.028) 12 4 10 1 5 7 11 2 6 8 12 1 PM600-01 12.7 (.500) 6.2 MAX. (.244) 0.25 (0.01) 9.2 (.362) 6 11.0 (.433) 7 2.0 TYP. (.079) 12.2 (.480) 10.0 (.394) 2.0 (.079) TYP. 13.2 (.520) 3 PAD LAYOUT 1.5 (.059) TYP. PM610 Series MARK PIN #1 12 1 0.7 (.028) TYP. PM610-01 15.0 (.591) 7.8 MAX. (.307) 0.35 (.014) 12.0 (.472) 14.6 (.575) 6 7 2.5 (.098) TYP. 13.6 (.535) 16.0 (.623) 9 SCHEMATIC 2.5 (.098) TYP. 17.0 (.669) 4 10 1 5 7 11 2 6 8 12 3 PAD LAYOUT 9 SCHEMATIC PM620 Series MARK PIN #1 12 17.0 (.669) 6 1.5 (.059) TYP. 0.40 (.016) PM620-01 1 8.4 (.331) MAX. 0.7 (.028) TYP. 1 12 6 7 15.0 (.591) 7 18.1 (.713) 2.5 (.098) TYP. 21.4 (.843) 17.1 (.673) DIMENSIONS: MM (INCHES) 2.5 (.098) TYP. 22.4 (.882) PAD LAYOUT SCHEMATIC Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. PM600/PM610/PM620 Series - SMD Inductor/Transformer Packaging Specifications PM600 16.00 ± 0.10 (.630 ± .004) 2.00 ± 0.10 (.039 ± .004) 1.50 +0.10/-0.00 (.059 +.004/-0.00) 4.00 ± 0.10 (.157 ± .004) 1.75 ± 0.10 (.069 ± .004) .040 ± 0.05 (.016 ± .002) 11.50 ± 0.10 (.453 ± .004) 24.00 ± 0.30 (.945 ± .012) 10 ° 1.50 MIN. DIA. (.049) 13.00 ± 0.10 (.512 ± .004) 6.30 ± 0.10 (.248 ± .004) 10 ° 13.00 ± 0.10 (.512 ± .004) DIMENSIONS: PM610 24.00 ± 0.10 (.945 ± .004) 4.00 ± 0.10 (.157 ± .004) 1.50 +0.10/-0.00 (.059 +.004/-0.00) 1.75 ± 0.10 (.069 ± .004) 2.00 ± 0.10 (.079 ± .004) 0.50 R (.020) 0.40 ± 0.05 (.016 ± .002) 14.20 ± 0.10 32.00 ± 0.30 (.559 ± .004) (1.260 ± .012) DIA. 2.00 (.079) MIN. 28.40 ± 0.10 (1.118 ± .004) 1.50 +0.10/-0.00 (.059 +.004/-0.00) MM (INCHES) 10 ° 10 ° 10 ° 8.65 ± 0.10 (.341 ± .004) 0.30 R (.012) MAX. 16.22 ± 0.10 (.639 ± .004) 1.70 +0.15/-0.05 (.067 +.006/-0.00) 10 ° 10 ° 0.35 (.014) 4 PLCS. 10 ° 4.00 (.157) 4 PLCS. 16.22 ± 0.10 (.639 ± .004) Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. PM600/PM610/PM620 Series - SMD Inductor/Transformer Packaging Specifications (Continued) PM620 28.00 ± 0.10 (1.102 ± .004) 2.00 ± 0.15 (.079 ± .006) 4.00 ± 0.10 (.157 ± .004) R 1.50 +0.10/-0.00 (.059 +.004/-0.00) 1.75 ± 0.10 (.069 ± .004) 0.50 (.020) 0.45 ± 0.05 (.018 ± .002) 3.00 (.118) 20.20 ± 0.15 (.795 ± .006) 44.00 ± 0.30 (1.732 ± .012) 6° 40 ° 40.40 ± 0.30 (1.732 ± .012) R 9.10 ± 0.10 (.358 ± .004) 0.30 (.012) R 1.50 +0.10/-0.00 (.059 +.004/-0.00) 22.50 ± 0.10 (.886 ± .004) 0.75 (.030) 1.70 +0.15/-0.05 (.067 +.006/-0.00) 40 ° 5° DIMENSIONS: MM (INCHES) 17.00 ± 0.10 (.669 ± .004) Single or multi-windings in parallel. ET of multiple winding in series is number of windings times value of ET. 330 DIA. (12.99) 2.0 ± 0.5 (.079 ± .020) 21.0 ± 0.8 (.827 ± .031) W1 13.0 ± 0.5 (.512 ± .020) DIA. PM600 50.0 (1.969) PM610 PM620 13.0 ± 0.5 DIA. (.512 ± .020) W1 30.4 (1.197) 38.4 (1.512) 50.4 (1.984) W2 26.0 (1.024) 34.0 (1.339) 46.0 (1.811) THICKNESS 0.10 (.004) MAX. EMBOSSED CAVITY EMBOSSED CARRIER W2 REV. 06/08 Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. Legal Disclaimer Notice This legal disclaimer applies to purchasers and users of Bourns® products manufactured by or on behalf of Bourns, Inc. and P[ZHɉSPH[LZJVSSLJ[P]LS`¸)V\YUZ¹ Unless otherwise expressly indicated in writing, Bourns® products and data sheets relating thereto are subject to change ^P[OV\[UV[PJL