SDR0906-822YL

T PL IA N M CO *R oH S Features Applications ■ High inductance up to 1.2 mH ■ Input/output of DC/DC converters ■ E12 series available ■ Power supplies for: ■ Wide inductance range - Portable communications equipment - Camcorders - LCD TVs ■ RoHS compliant* SDR0906 Series - SMD Power Inductors Bourns Part Number SDR0906-2R2ML SDR0906-2R7ML SDR0906-3R9ML SDR0906-4R7ML SDR0906-5R6ML SDR0906-6R8ML SDR0906-8R2ML SDR0906-100ML SDR0906-120ML SDR0906-150ML SDR0906-180ML SDR0906-220ML SDR0906-270KL SDR0906-330KL SDR0906-390KL SDR0906-470KL SDR0906-560KL SDR0906-680KL SDR0906-820KL SDR0906-101KL SDR0906-121KL SDR0906-151KL SDR0906-181KL SDR0906-221KL SDR0906-271KL SDR0906-331KL SDR0906-391KL SDR0906-471KL SDR0906-561KL SDR0906-681KL SDR0906-821KL SDR0906-102KL SDR0906-122KL SDR0906-152KL SDR0906-182KL SDR0906-222KL SDR0906-272KL SDR0906-332KL SDR0906-392KL SDR0906-472KL SDR0906-562KL SDR0906-682KL SDR0906-822KL SDR0906-103KL Inductance 1 kHz (μH) Tol. % Q Ref. Test Frequency (MHz) 2.2 2.7 3.9 4.7 5.6 6.8 8.2 10 12 15 18 22 27 33 39 47 56 68 82 100 120 150 180 220 270 330 390 470 560 680 820 1000 1200 1500 1800 2200 2700 3300 3900 4700 5600 6800 8200 10000 ± 20 ± 20 ± 20 ± 20 ± 20 ± 20 ± 20 ± 20 ± 20 ± 20 ± 20 ± 20 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 30 30 28 27 28 27 27 35 35 35 35 35 35 35 25 25 25 20 20 15 15 15 15 20 20 15 15 15 15 15 15 60 60 70 60 94 90 78 96 86 100 90 100 100 7.96 7.96 7.96 7.96 7.96 7.96 7.96 2.52 2.52 2.52 2.52 2.52 2.52 2.52 2.52 2.52 2.52 2.52 2.52 0.796 0.796 0.796 0.796 0.796 0.796 0.796 0.796 0.796 0.796 0.796 0.796 0.252 0.252 0.252 0.252 0.252 0.252 0.252 0.252 0.252 0.252 0.252 0.252 0.0796 Multiple windings possible (up to four windings). SRF Min. (MHz) RDC Max. (Ω) I rms Max. (A) I sat Typ. (A) 105 84 77 55 42 36 29 25 23 22 19 16 15 14 13 12 12 10 9 8 8 7 6 6 5 5 5 5 4 4 3 2 2 2 2 2 1 1 1 1 1 1 1 1 0.03 0.04 0.04 0.05 0.06 0.06 0.07 0.09 0.10 0.11 0.12 0.13 0.15 0.18 0.19 0.23 0.26 0.31 0.33 0.39 0.43 0.56 0.64 0.85 1.00 1.27 1.40 1.63 2.10 2.40 2.75 3.50 4.00 5.00 5.80 8.00 9.00 10.00 13.50 15.00 20.00 23.00 28.00 33.00 4.00 3.50 3.30 3.00 2.80 2.60 2.40 2.10 2.00 1.90 1.80 1.60 1.40 1.25 1.15 1.10 1.05 1.00 0.95 0.90 0.85 0.75 0.70 0.60 0.55 0.50 0.45 0.40 0.32 0.28 0.24 0.22 0.20 0.18 0.17 0.14 0.13 0.12 0.10 0.09 0.07 0.06 0.05 0.04 6.70 6.50 5.50 4.80 4.50 4.50 4.00 3.20 3.10 2.90 2.40 2.40 2.20 2.00 1.60 1.50 1.40 1.40 1.30 1.10 1.10 0.90 0.82 0.80 0.76 0.65 0.64 0.57 0.53 0.46 0.36 0.35 0.28 0.26 0.24 0.23 0.23 0.18 0.18 0.16 0.15 0.14 0.12 0.10 Test Frequency ............................. 1 KHz Test Voltage .......................................1 V .. 230 °C, 50 sec. max. Operating Temperature ................................-40 °C to +125 °C (Temperature rise included) Storage Temperature.. -40 °C to +125 °C Resistance to Soldering Heat ............................... +260 °C for 5 sec. Moisture Sensitivity Level ..................... 1 ................. N/A Materials Core ............................... Ferrite DR core Wire .................... Enameled copper wire Base ................................................ LCP Adhesive .............................. Epoxy resin Terminal ........................................Cu/Sn Rated Current ...................Ind. drop 10 % typ. at Isat Temperature Rise ....................40 °C max. at rated I rms Packaging .................... 600 pcs. per reel Product Dimensions 2.5 ± 0.3 (.098 ± .012) 4 2.5 ± 0.3 (.098 ± .012) 10.5 + 0 (.413 + 0) DIMENSIONS: MM (INCHES) 1 2.5 ± 0.3 (.098 ± .012) 6.3 (.248) MAX. 11.0 ± 0.5 (.433 ± .02) 12.5 ± 0.5 (.492 ± .02) Recommended Layout Electrical Schematic 1 2.2 (.087) 10.3 (.406) 2.5 (.098) 4 1.0 (.039) WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf 2.2 (.087) 14.7 (.579) SRF0504 SDR0906Series Series- -Line SMDFilter Power Inductors Materials 2.0 ± 0.5 (.079 ± .020) 330 (12.99) DIA. Paper Plastics 30.4 (1.20) 21 ± .8 (.827 ± .031) Typical Part Marking THICKNESS 0.10 (.004) MAX. 13.0 ± 0.5 (.512 ± .020) DIA. START 1 8 EMBOSSED CAVITY 50.0 (1.969) 101 13.0 ± 0.5 DIA. (.512 ± .020) FINISH 4 26 (1.02) DIMENSIONS: 5 EMBOSSED CARRIER 24 0 MM (INCHES) 4 (.157) END START 24 (.945) 6.85 (.27) 16 (.63) NO COMPONENT COMPONENTS NO COMPONENT 200 (7.874) 9600 (378.2) 400 (15.748) USER DIRECTION OF FEED QTY: 600 PCS. PER REEL Strength of Cover Tape 165° TO 180° TOP COVER TAPE The force for tearing off cover tape is 10 to 130 grams in the arrow direction. BASE TAPE Tel: +886-2 2562-4117 • Email: asiacus@bourns.com EMEA: Tel: +36 88 520 390 • Email: eurocus@bourns.com The Americas: Tel: +1-951 781-5500 • Email: americus@bourns.com www.bourns.com REV. 03/18 Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. Legal Disclaimer Notice This legal disclaimer applies to purchasers and users of Bourns® products manufactured by or on behalf of Bourns, Inc. and P[ZHɉSPH[LZJVSSLJ[P]LS`¸)V\YUZ¹ Unless otherwise expressly indicated in writing, Bourns® products and data sheets relating thereto are subject to change ^P[OV\[UV[PJL