SRU8045A-6R2Y

*R & oHS AE C C OM AP P PR LI OV A N ED T Features ■ Shielded construction ■ Inductance range: 3.5 to 100 µH 330 ■ Rated current up to 5 A ■ AEC-Q200 qualified ■ RoHS compliant* and halogen free** SRU8045A Series - Shielded Power Inductors Inductance @ 100 kHz / 0.1 V L (μH) Tol. (%) Bourns Part Number Q (Ref.) Test Freq. (MHz) DCR (Ω) SRF (MHz) Typ. Typ. I rms (A) Max. I sat (A) SRU8045A-3R5Y 3.5 ± 30 12 7.96 45 0.0188 0.025 5.00 5.00 SRU8045A-4R7Y 4.7 ± 30 10 7.96 30 0.022 0.0275 4.60 4.40 SRU8045A-6R2Y 6.2 ± 30 10 7.96 23 0.0285 0.036 4.20 3.80 SRU8045A-100Y 10 ± 30 16 2.52 18 0.035 0.048 3.50 3.30 SRU8045A-220Y 22 ± 30 18 2.52 12 0.094 0.122 2.25 2.15 SRU8045A-330Y 33 ± 30 14 2.52 8 0.118 0.15 2.00 1.80 SRU8045A-470Y 47 ± 30 12 2.52 6 0.215 0.27 1.45 1.40 SRU8045A-680Y 68 ± 30 8 2.52 4 0.32 0.40 1.25 1.20 SRU8045A-101Y 100 ± 30 20 0.796 3 0.40 0.50 1.00 0.92 Electrical Schematic How to Order Operating Temp. .......... -40 °C to +125 °C (Temperature rise included) Storage Temperature .. -40 °C to +125 °C Temperature Rise .....40 °C at rated Irms Rated Current ............ Inductance drops 35 % at Isat Failure In Time (FIT) ........24.7/109 hours Mean Time Between Failures (MTBF) .................................. 40.4 x 106 hours Materials Core ..............................................Ferrite Wire ............................Enameled copper Terminal Finish ...................................Sn Packaging ..... 1000 pcs. per 13-inch reel Product Dimensions SRU8045A - 100Y 8.0 ± 0.3 (.315 ± .012) Model Value Code (see table) 8.0 ± 0.3 (.315 ± .012) Temperature Rising Area Preheat Area Reflow Area Forced Cooling Area +4.0 °C/Sec. Max. 150~200 °C / 60~120 Sec. +3.0 °C/Sec. Max. -(1.0~5.0) °C/Sec. Max. Temperature (°C) 250 4.5 ± 0.3 (.177 ± .012) Peak Temperature 250 max. Peak Temperature: 250 °C 217 °C 60~150 Sec. 200 Max. Peak Temperature -5 30 sec. max. 60 Sec. Max. 150 2.4 (.094) TYP. 60~120 Sec. 100 Max. Time Above 217 : 60~150 sec. max. 50 0 6.4 TYP. (.252) 50 100 150 200 3.20 (.126) TYP. 250 2.4 TYP. (.094) Time (Seconds) Recommended Layout 1.4 (.055) 1.4 (.055) WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov * RoHS Directive 2002/95/EC Jan. 27, 2003 including annex and RoHS Recast 2011/65/EU June 8, 2011. **Bourns considers a product to be “halogen free” if (a) the Bromine (Br) content is 900 ppm or less; (b) the Chlorine (Cl) content is 900 ppm or less; and (c) the total Bromine (Br) and Chlorine (Cl) content is 1500 ppm or less. Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf 1.4 (.055) 6.2 (.244) 6.2 (.244) 3.4 (.134) 1.4 (.055) DIMENSIONS: 3.4 (.134) MM (INCHES) SRF0504 Filter Power Inductors SRU8045ASeries Series- Line - Shielded Inductance vs. IDC SRU8045A-3R5Y SRU8045A-6R2Y 120 L @ 25 ℃ L @ 125 ℃ L @ 25 ℃ L @ 125 ℃ 100 L / LOA (%) 80 60 40 20 0 0 1.0 2.0 3.0 4.0 5.0 6.0 7.0 0 0.3 0.6 IDC (A) SRU8045A-330Y 1.2 1.5 1.8 SRU8045A-101Y 120 L @ 25 ℃ 100 100 80 80 L / LOA (%) L / LOA (%) 120 0.9 IDC (A) 60 40 L @ 125 ℃ 60 40 20 20 L @ 25 ℃ L @ 125 ℃ 0 0 0 0.16 0.32 0.48 0.64 0 0.80 0.20 0.40 0.60 0.80 1.00 IDC (A) IDC (A) Temperature vs. IDC SRU8045A-3R5Y 80 T @ 25 ℃ 60 60 ΔT (°C) ΔT (°C) SRU8045A-6R2Y 80 T @ 25 ℃ 40 20 40 20 0 0 0 1 2 3 4 5 6 7 0 1 2 SRU8045A-330Y 70 4 5 6 SRU8045A-101Y 80.0 T @ 25 ℃ 60 T @ 25 ℃ 60.0 ΔT (°C) 50 ΔT (°C) 3 IDC (A) IDC (A) 40 40.0 30 20 20.0 10 0 0 0.3 0.6 0.9 1.2 1.5 IDC (A) 1.8 2.1 2.4 2.7 0.0 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 IDC (A) Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. SRF0504 Filter Power Inductors SRU8045ASeries Series- Line - Shielded 330 DIA. (12.99) 2.0 ± 0.5 (.079 ± .020) 21.0 ± 0.8 (.827 ± .031) 22.4 (.882) 13.0 ± 0.5 (.512 ± .020) DIA. 50.0 (1.969) 13.0 ± 0.5 DIA. (.512 ± .020) 18 (.709) 16 (.630) 4 (.157) END START 12 (.472) NO COMPONENT 200 (7.874) NO COMPONENT COMPONENTS 400 (15.748) USER DIRECTION OF FEED QTY: 1000 PCS. PER REEL DIMENSIONS: MM (INCHES) Tel: +886-2 2562-4117 • Email: asiacus@bourns.com EMEA: Tel: +36 88 520 390 • Email: eurocus@bourns.com The Americas: Tel: +1-951 781-5500 • Email: americus@bourns.com www.bourns.com 07/16 Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. Legal Disclaimer Notice This legal disclaimer applies to purchasers and users of Bourns® products manufactured by or on behalf of Bourns, Inc. and P[ZHɉSPH[LZJVSSLJ[P]LS`¸)V\YUZ¹ Unless otherwise expressly indicated in writing, Bourns® products and data sheets relating thereto are subject to change ^P[OV\[UV[PJL