TISP4C015L1NR-S

CO M PL IA NT TISP4C015L1N THRU TISP4C035L1N *R oH S LOW CAPACITANCE BIDIRECTIONAL THYRISTOR OVERVOLTAGE PROTECTOR TISP4C0xxL1N Overvoltage Protector Series SOT23-5 Package (Top View) Designed for ADSL, ADSL2, VDSL, VDSL2 protection Ion-Implanted Breakdown Region - Precise and Stable Voltage ( Ti p) 1 NU 2 (Ring) 3 Low Voltage Overshoot Under Surge 5 ( Ti p) 4 (Ring) Low Off-State Capacitance VDRM V(BO) V V TISP4C015L1N TISP4C020L1N 8 12 15 20 TISP4C025L1N 16 25 TISP4C035L1N 24 35 Device Name Terminal typical application names shown in parenthesis. NU - Non-usable; no external electrical connection should be made to this terminal. MD-SOT23-5-001-a Rated for International Surge Wave Shapes IPPSM Wave Shape Standard 8/20 IEC 61000-4-5 30 10/1000 GR-1089-CORE 18 Device Symbol A (Tip) Description This range of devices is designed to protect xDSL line-driver interfaces from overvoltages. Overvoltages are normally caused (Ring) by a.c. power-system or lightning-flash disturbances which are induced or conducted onto the telephone line. These symmetriSD-TISP4-002-a cal protectors are two-terminal thyristor-crowbar devices. They can be used to protect between conductors, or a pair of devices can be deployed to protect from line to ground. When placed between the xDSL line driver IC and the transformer, this protector will clamp and switch into a low-impedance state, safely diverting the energy transferred by the xDSL coupling transformer. The low capacitance design makes this device suitable for designs from ADSL all the way up to 30 MHz VDSL2. Telecom ports need protection against Common Mode (Longitudinal) and Differential (Metallic) surges, to comply with international standards such as ITU-T K.20, K.21 or K.45, Telcordia GR-1089-CORE and YD/T. Common Mode surges are resisted by the galvanic isolation of the coupling transformer which is commonly rated to 2 kV or greater. Differential surges can be transmitted by the transformer, and can stress the Line Driver Interface IC. As the xDSL interface circuit is designed to operate from 3 kHz to to 30 MHz, nearby high frequency events - such as cable flashover or primary protection activation - can generate damaging conditions for the interface requiring this type of protection. Please contact your Bourns representative if the protection voltage you require is not listed. How to Order Device Package Carrier Order As Marking Code Reel Quantity TISP4C0xxL1N SOT23-5 Embossed Tape Reeled TISP4C0xxL1NR-S Cxx 10000 Insert xx corresponding to device name. JULY 2008 - REVISED MAY 2009 *RoHS Directive 2002/95/EC Jan 27 2003 including Annex. Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications TISP4C0xxL1N Overvoltage Protector Series Absolute Maximum Ratings, TA = 25 °C (Unless Otherwise Noted) Rating ‘4C015L1N ‘4C020L1N ‘4C025L1N ‘4C035L1N Repetitive peak off-state voltage S ym b ol Value U nit VDRM ±8 ±12 ±16 ±24 V Non-repetitive peak impulse current (see Notes 1, 2 and 3) 8/20 µs (IEC 61000-4-5, 1.2/50 µs voltage, 8/20 current combination wave generator) 10/1000 µs (GR-1089-CORE, 10/1000 µs voltage wave shape) Junction temperature Storage temperature range IPPSM ±30 ±18 A TJ -40 to +150 °C Tstg -65 to +150 °C NOTES: 1. Initially the device must be in thermal equilibrium with TJ = 25 °C. 2. The surge may be repeated after the device returns to its initial conditions. 3. Rated currents only apply if pins 1 & 5 (Tip) are connected together and pins 3 & 4 (Ring) are connected together. Electrical Characteristics, TA = 25 °C (Unless Otherwise Noted) Parameter IDRM V(BO) IH Repetitive peak off-state current Breakover voltage Holding current CO Off-state capacitance ΔC Delta-capacitance Test Conditions Min Typ VD = VDRM dv/dt = ±250 V/ms, RSOURCE = 300 Ω IT = ±5 A, di/dt = ±30 mA/ms f = 1 MHz, Vd = 1 V rms, VD = 2 V f = 1 MHz, Vd = 1 V rms, VD = 1 V to VDRM ‘4C015L1N ‘4C020L1N ‘4C025L1N ‘4C035L1N ‘4C015L1N ‘4C020L1N ‘4C025L1N ‘4C035L1N ‘4C015L1N ‘4C020L1N ‘4C025L1N ‘4C035L1N ‘4C015L1N ‘4C020L1N ‘4C025L1N ‘4C035L1N Max Unit ±1 µA ±15 ±20 ±25 ±35 V ± 50 ±20 ±50 ±50 mA 15 15 15 15 3 3.5 3.5 4.5 pF pF JULY 2008 - REVISED MAY 2009 Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications TISP4C0xxL1N Overvoltage Protector Series Parameter Measurement Information +i I PPSM Quadrant I Switching Characteristic ITSM ITRM IT V(BO) VT I(BO) IH V (BR)M V DRM -v I(BR) V (BR) I(BR) IDRM VD ID ID VD IDRM +v V DRM V (BR)M V (BR) IH I(BO) VT V(BO) IT ITRM ITSM Quadrant III Switching Characteristic I PPSM -i Figure 1. Voltage-Current Characteristic for Tip and Ring Terminals All Measurements are Referenced to the Ring Terminal JULY 2008 - REVISED MAY 2009 Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications PM-TISP4xxx-001-a TISP4C0xxL1N Overvoltage Protector Series Typical Characteristics CAPACITANCE vs OFF-STATE VOLTAGE TC-4CN-001 15 f = 1 MHz Vd = 1 VRMS TJ = 25 °C 14 13 12 Capacitance - pF 11 10 9 TISP4C015L1N 8 TISP4C020L1N 7 6 TISP4C025L1N 5 4 TISP4C035L1N 3 2 1 0 0 2 4 6 8 10 12 14 16 18 20 22 24 VD - Off-State Voltage - V Recommended PCB Layout T 1 NU 2 R 3 5 T PCB Track 4 R PCB Track MD-SOT223-5-xxx Figure 3. JULY 2008 - REVISED MAY 2009 Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications Bourns Sales Offices Region Phone Fax The Americas: Europe: Asia-Pacific: +1-951-781-5500 +41-41-7685555 +886-2-25624117 +1-951-781-5700 +41-41-7685510 +886-2-25624116 Region Phone Fax The Americas: Europe: Asia-Pacific: +1-951-781-5500 +41-41-7685555 +886-2-25624117 +1-951-781-5700 +41-41-7685510 +886-2-25624116 Technical Assistance www.bourns.com Bourns® products are available through an extensive global network of representatives, agents and distributors. To obtain technical applications assistance, a quotation, or to place an order, contact a Bourns representative in your area. “TISP” is a trademark of Bourns Ltd., a Bourns Company, and is Registered in U.S. Patent and Trademark Office. “Bourns” is a registered trademark of Bourns, Inc. in the U.S. and other countries.