BWL-2B1R01-H1

BRIGHT LED ELECTRONICS CORP. SINCE 1981 BWL-2B1R01-H1 ● Features: 1. Input power: 1W. 2. Chip material: AlGaInP. 3. Emitted color: Red. 4. High lumen output. 5. High flux density. 6. Low power consumption. 7. Efficient heat transfer. 8. With heat sink. ● Applications: 1. Light engine. 2. Torch. 3. Desk lamp. 4. General lighting. ● Package dimensions： A C 20.00 Polarity Black wire Red wire Notes: 1. All dimensions are in millimeters. 2. Tolerance is ±0.5mm unless otherwise specified. + - Ver.1.1 Page: 1 of 4 BRIGHT LED ELECTRONICS CORP. SINCE 1981 BWL-2B1R01-H1 ● Absolute maximum ratings(Ta=25℃) Parameter Power Dissipation DC Forward Current*1 Peak Pulsed Forward Current*2 LED Junction Temperature Operating Temperature Storage Temperature Reverse Voltage Soldering Temperature (T=5 sec) Symbol PD IF IFP Tj Topr Tstg VR Tsol Rating 1.0 350 1.0 130 Unit W mA A o C C C -30~120 -40~120 5 300 ± 5 o o V o C *1Proper current derating must be followed to keep LED junction temperature (Tj) below the maximum. *2Condition for IFP is pulsed with 1/10 duty and 0.1msec width. ● Electrical & Optical Characteristics LED (Ta=25℃) Parameter Forward Voltage Total Flux Peak Wavelength Dominant Wavelength Spectral Line Half-width Reverse Current Thermal Resistance, Junction To Case Symbol VF Φv λp λd Δλ IR RθJ-C 2θ1/2 Condition IF =350mA IF =350mA IF =350mA IF =350mA IF =350mA VR=5V TJ = 25℃，IF = 350mA IF = 350mA Min. 20 620 - Typ. 2.2 25 635 20 15 120 Max. 2.6 630 50 - Unit V lm nm nm nm µA ℃/W degree Viewing Angle Ver.1.0 Page: 2 of 4 BRIGHT LED ELECTRONICS CORP. SINCE 1981 BWL-2B1R01-H1 ● Typical electro-optical characteristics curves RθJ-A =30℃/W RθJ-A =60℃/W Ver.1.0 Page: 3 of 4 BRIGHT LED ELECTRONICS CORP. SINCE 1981 BWL-2B1R01-H1 ● Package Method : (unit:mm) 360 [14.17] 11 [0.43] 300 [11.81] 80 pcs/tray Tray 310 [12.21] 370 [14.57] 10 tray / carton 120 [4.73] Carton NOTES : Tray : Tolerance is ± 5 mm unless otherwise noted. Carton : Tolerance is ± 10 mm unless otherwise noted. Ver.1.0 Page: 4 of 4