CDC203DWR

CDC203 3.3-V HEX INVERTER/CLOCK DRIVER SCAS324A – OCTOBER 1989 – REVISED NOVEMBER 1995 D D D D D D D D DW PACKAGE (TOP VIEW) Replaces 74AC11203 Low-Skew Propagation Delay Specifications for Clock Driver Applications Operates at 3.3-V VCC Flow-Through Architecture Optimizes PCB Layout Center-Pin VCC and GND Pin Configurations Minimize High-Speed Switching Noise EPIC (Enhanced-Performance Implanted CMOS) 1-µm Process 500-mA Typical Latch-Up Immunity at 125°C Packaged in Plastic Small-Outline Package 1Y 2Y 3Y GND GND GND GND 4Y 5Y 6Y 1 20 2 19 3 18 4 17 5 16 6 15 7 14 8 13 9 12 10 11 1A 2A 3A NC VCC VCC NC 4A 5A 6A NC – No internal connection description The CDC203 contains six independent inverters. The device performs the Boolean function Y = A. It is designed specifically for applications requiring low skew between switching outputs. The CDC203 is characterized for operation from 25°C to 70°C. FUNCTION TABLE INPUT A OUTPUT Y H L L H logic symbol† 1A 2A 3A 4A 5A 6A 20 logic diagram (positive logic) 1 1 19 2 18 3 13 8 12 9 11 10 1Y 1A 20 1 19 2 18 3 13 8 12 9 11 10 1Y 2Y 3Y 2A 2Y 4Y 5Y 3A 3Y 6Y † This symbol is in accordance with ANSI/IEEE Std 91-1984 and IEC Publication 617-12. 4A 5A 6A 4Y 5Y 6Y Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. EPIC is a trademark of Texas Instruments Incorporated. Copyright  1995, Texas Instruments Incorporated PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 1 CDC203 3.3-V HEX INVERTER/CLOCK DRIVER SCAS324A – OCTOBER 1989 – REVISED NOVEMBER 1995 absolute maximum ratings over operating free-air temperature range (unless otherwise noted)† Supply voltage range, VCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 0.5 V to 7 V Input voltage range, VI (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 0.5 V to VCC + 0.5 V Output voltage range, VO (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 0.5 V to VCC + 0.5 V Input clamp current, IIK (VI < 0 or VI > VCC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ± 20 mA Output clamp current, IOK (VO < 0 or VO > VCC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ± 50 mA Continuous output current, IO (VO = 0 to VCC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ± 50 mA Continuous current through VCC or GND . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±150 mA Maximum power dissipation at TA = 55°C (in still air) (see Note 2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.6 W Storage temperature range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 65°C to 150°C † Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. NOTES: 1. The input and output negative-voltage ratings may be exceeded if the input and output clamp-current ratings are observed. 2. The maximum package power dissipation is calculated using a junction temperature of 150°C and a board trace length of 750 mils. For more information, refer to the Package Thermal Considerations application note in the 1994 ABT Advanced BiCMOS Technology Data Book, literature number SCBD002B. recommended operating conditions VCC Supply voltage VIH High level input voltage High-level VCC = 3 V VCC = 3.6 V VIL Low level input voltage Low-level VCC = 3 V VCC = 3.6 V VI VO Input voltage NOM MAX 3 3.3 3.6 2.1 Output voltage 0.9 1.1 0 IOH High level output current High-level IOL Low level output current Low-level VCC = 3 V VCC = 3.6 V ∆t / ∆v Input transition rise or fall rate fclock TA Input clock frequency Operating free-air temperature • DALLAS, TEXAS 75265 – 12 12 12 25 POST OFFICE BOX 655303 VCC VCC – 12 0 UNIT V V 2.5 0 VCC = 3 V VCC = 3.6 V 2 MIN V V V mA mA 10 ns / V 40 MHz 70 °C CDC203 3.3-V HEX INVERTER/CLOCK DRIVER SCAS324A – OCTOBER 1989 – REVISED NOVEMBER 1995 electrical characteristics over recommended operating free-air temperature range (unless otherwise noted) PARAMETER TEST CONDITIONS IOH = – 50 µA VOH IOH = – 12 mA IOL = 50 µA VOL IOL = 12 mA II ICC VI = VCC or GND VI = VCC or GND, Ci VI = VCC or GND IO = 0 TA = 25°C VCC MIN TYP MAX MIN 3V 2.9 3.6 V 3.5 3.5 3V 2.58 2.48 3.6 V 3.18 MAX UNIT 2.9 V 3.08 3V 0.1 0.1 3.6 V 0.1 0.1 3V 0.36 0.44 3.6 V 0.36 0.44 3.6 V ± 0.1 ±1 µA 4 40 µA 3.6 V 3.3 V 4 V pF switching characteristics over recommended operating free-air temperature range, VCC = 3.3 V ± 0.3 V (see Note 3 and Figures 1 and 2) PARAMETER FROM (INPUT) TO (OUTPUT) tPLH tPHL A Y tsk(o) A Y MIN MAX 3.5 6.1 3.5 6.1 0.7 UNIT ns ns NOTE 3: All specifications are valid only for all outputs switching in phase simultaneously. POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 3 CDC203 3.3-V HEX INVERTER/CLOCK DRIVER SCAS324A – OCTOBER 1989 – REVISED NOVEMBER 1995 PARAMETER MEASUREMENT INFORMATION From Output Under Test CL = 30 pF (see Note A) 500 Ω LOAD CIRCUIT VCC Input (see Note B) 50% 50% 0V tPLH tPHL 50% VCC Output VOH 50% VCC VOL VOLTAGE WAVEFORMS PROPAGATION DELAY TIMES NOTES: A. CL includes probe and jig capacitance. B. Input pulses are supplied by generators having the following characteristics: PRR ≤ 10 MHz, ZO = 50 Ω, tr = 3 ns, tf = 3 ns. C. The outputs are measured one at a time with one input transition per measurement. Figure 1. Load Circuit and Voltage Waveforms 4 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 CDC203 3.3-V HEX INVERTER/CLOCK DRIVER SCAS324A – OCTOBER 1989 – REVISED NOVEMBER 1995 PARAMETER MEASUREMENT INFORMATION 50% 1A – 6A 50% 50% Y1 50% tPHL1 tPLH1 50% Y2 50% tPHL2 tPLH2 50% Y3 50% tPHL3 tPLH3 Y4 50% 50% tPHL4 tPLH4 50% Y5 50% tPHL5 tPLH5 50% Y6 50% tPHL6 tPLH6 NOTE A: Output skew, tsk(o), is calculated as the greater of: – The difference between the fastest and slowest of tPLHn (n = 1, 2, . . . , 6) – The difference between the fastest and slowest of tPHLn (n = 1, 2, . . . , 6) Figure 2. Waveforms for Calculation of tsk(o) POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 5 PACKAGE OPTION ADDENDUM www.ti.com 20-Aug-2021 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Pins Package Drawing Qty Eco Plan (2) Lead finish/ Ball material MSL Peak Temp Op Temp (°C) Device Marking (3) (4/5) (6) CDC203DW ACTIVE SOIC DW 20 25 RoHS & Green NIPDAU Level-1-260C-UNLIM 25 to 70 CDC203 CDC203DWG4 ACTIVE SOIC DW 20 25 RoHS & Green NIPDAU Level-1-260C-UNLIM 25 to 70 CDC203 (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) RoHS: TI defines "RoHS" to mean semiconductor products that are compliant with the current EU RoHS requirements for all 10 RoHS substances, including the requirement that RoHS substance do not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, "RoHS" products are suitable for use in specified lead-free processes. TI may reference these types of products as "Pb-Free". RoHS Exempt: TI defines "RoHS Exempt" to mean products that contain lead but are compliant with EU RoHS pursuant to a specific EU RoHS exemption. Green: TI defines "Green" to mean the content of Chlorine (Cl) and Bromine (Br) based flame retardants meet JS709B low halogen requirements of