LAUNCHXL-CC3235S

TI LaunchPad™ kit with SimpleLink™ Wi-Fi® CC3235S Wireless Microcontroller Development kit featuring the CC3235S Wi-Fi® Microcontroller for rapid prototyping PART NO: LAUNCHXL-CC3235S LAUNCH YOUR DESIGN START @ ti.com/CC3235start TI LaunchPad™ kit with SimpleLink™ Wi-Fi® CC3235S Wireless Microcontroller Development kit featuring the CC3235S Wi-Fi® Microcontroller for rapid prototyping PART NO: 1 2* 3 4 5 6* 7 8 9 10 21 22 23 24 25 26 27 28 29 30 LAUNCHXL-CC3235S 3V3 GPIO_02 GND COEX_WAKEUP GPIO_04 A1 SW2 UART0_RX SPI CS GPIO_12 UART0_TX GPIO_31 GPIO_06 GPIO_04 GPIO_14 RESET A2 SPI_CLK SPI MOSI GPIO_16 SPI MISO GPIO_15 GPIO_07 GPIO_25 RED LED I2C_SCL GPIO_01 GREEN LED I2C_SDA 5V SW3 GPIO_22 COEX_SW_OUT ANTSEL1 COEX_BLE GND BLUE LED GPIO_17 ANTSEL2 GPIO_02 A0 PWM0 GPIO_24 GPIO_05 A3 PWM05 GPIO_09 GPIO_03 A1 SOP2 PWM02 GPIO_04 A2 GPIO_28 GPIO_08 I2S_FSYNC NWP_LOG GPIO_07 GPIO_30 I2S_CLK WLAN_LOG GPIO_05 GPIO_09 I2S_DOUT RS232_TX GPIO_23 I2S_DIN RS232_TX GPIO_24 Explore all TI LaunchPad™ kits @ www.ti.com/launchpad GPIO_25 20 19 18 17 16 15 14 13 12 11 40 39 38* 37* 36* 35* 34* 33* 32 31 *These pins are not connected to the Launchpad Connector by default. © 2018 Texas Instruments Incorporated. The platform bar, CC3235 and LaunchPad are trademarks of Texas Instruments. All other trademarks are the property of their respective owners. SWAU120 IMPORTANT NOTICE AND DISCLAIMER TI PROVIDES TECHNICAL AND RELIABILITY DATA (INCLUDING DATASHEETS), DESIGN RESOURCES (INCLUDING REFERENCE DESIGNS), APPLICATION OR OTHER DESIGN ADVICE, WEB TOOLS, SAFETY INFORMATION, AND OTHER RESOURCES “AS IS” AND WITH ALL FAULTS, AND DISCLAIMS ALL WARRANTIES, EXPRESS AND IMPLIED, INCLUDING WITHOUT LIMITATION ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY RIGHTS. These resources are intended for skilled developers designing with TI products. You are solely responsible for (1) selecting the appropriate TI products for your application, (2) designing, validating and testing your application, and (3) ensuring your application meets applicable standards, and any other safety, security, or other requirements. These resources are subject to change without notice. TI grants you permission to use these resources only for development of an application that uses the TI products described in the resource. Other reproduction and display of these resources is prohibited. No license is granted to any other TI intellectual property right or to any third party intellectual property right. TI disclaims responsibility for, and you will fully indemnify TI and its representatives against, any claims, damages, costs, losses, and liabilities arising out of your use of these resources. TI’s products are provided subject to TI’s Terms of Sale (www.ti.com/legal/termsofsale.html) or other applicable terms available either on ti.com or provided in conjunction with such TI products. TI’s provision of these resources does not expand or otherwise alter TI’s applicable warranties or warranty disclaimers for TI products. Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright © 2019, Texas Instruments Incorporated