LM1458, LM1558
www.ti.com
SNOSBU4D – APRIL 1998 – REVISED MARCH 2013
LM1458/LM1558 Dual Operational Amplifier
Check for Samples: LM1458, LM1558
FEATURES
1
•
•
•
2
No Frequency Compensation Required
Short-Circuit Protection
Wide Common-Mode and Differential Voltage
Ranges
•
•
•
Low-Power Consumption
8-Lead TO-99 and 8-Lead PDIP
No Latch Up When Input Common Mode
Range is Exceeded
DESCRIPTION
The LM1458 and the LM1558 are general purpose dual operational amplifiers. The two amplifiers share a
common bias network and power supply leads. Otherwise, their operation is completely independent.
The LM1458 is identical to the LM1558 except that the LM1458 has its specifications guaranteed over the
temperature range from 0°C to +70°C instead of −55°C to +125°C.
Connection Diagram
Figure 1. TO-99 Package
(Top View)
See Package Number LMC (O-MBCY-W8)
Figure 2. Dual-In-Line Package
(Top View)
See Package Number D (R-PDSO-G8) or
P (R-PDIP-T8)
These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam
during storage or handling to prevent electrostatic damage to the MOS gates.
1
2
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
All trademarks are the property of their respective owners.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 1998–2013, Texas Instruments Incorporated
LM1458, LM1558
SNOSBU4D – APRIL 1998 – REVISED MARCH 2013
www.ti.com
Absolute Maximum Ratings (1) (2) (3)
Supply Voltage
LM1558
±22V
LM1458
±18V
Power Dissipation
(4)
LM1558H/LM1458H
500 mW
LM1458N
400 mW
Differential Input Voltage
Input Voltage
±30V
(5)
±15V
Output Short-Circuit Duration
Continuous
Operating Temperature Range
LM1558
LM1458
−55°C to +125°C
0°C to +70°C
Storage Temperature Range
−65°C to +150°C
Lead Temperature (Soldering, 10 sec.)
260°C
Soldering Information
PDIP Package
Soldering (10 seconds)
260°C
SOIC Package
Vapor Phase (60 seconds)
215°C
Infrared (15 seconds)
220°C
See AN-450 “Surface Mounting Methods and Their Effect on Product Reliability” for other methods of soldering surface mount devices.
ESD tolerance
(1)
(2)
(3)
(4)
(5)
(6)
(6)
300V
“Absolute Maximum Ratings” indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for
which the device is functional, but do not guarantee specific performance limits.
Refer to RETS 1558V for LM1558J and LM1558H military specifications.
If Military/Aerospace specified devices are required, please contact the TI Sales Office/Distributors for availability and specifications.
The maximum junction temperature of the LM1558 is 150°C, while that of the LM1458 is 100°C. For operating at elevated temperatures,
devices in the LMC package must be derated based on a thermal resistance of 150°C/W, junction to ambient or 20°C/W, junction to
case. For the PDIP the device must be derated based on a thermal resistance of 187°C/W, junction to ambient.
For supply voltages less than ±15V, the absolute maximum input voltage is equal to the supply voltage.
Human body model, 1.5 kΩ in series with 100 pF.
Electrical Characteristics
(1)
Parameter
Conditions
LM1558
Min
Typ
LM1458
Max
Min
Typ
Units
Max
Input Offset Voltage
TA = 25°C, RS ≤ 10 kΩ
1.0
5.0
1.0
6.0
mV
Input Offset Current
TA = 25°C
80
200
80
200
nA
Input Bias Current
TA = 25°C
200
500
200
500
Input Resistance
TA = 25°C
Supply Current Both
Amplifiers
TA = 25°C, VS = ±15V
Large Signal Voltage Gain
TA = 25°C, VS = ±15V
0.3
1.0
3.0
50
0.3
5.0
160
1.0
3.0
20
nA
MΩ
5.6
160
mA
V/mV
VOUT = ±10V, RL ≥ 2 kΩ
Input Offset Voltage
RS ≤ 10 kΩ
Input Offset Current
Input Bias Current
Large Signal Voltage Gain
6.0
7.5
mV
500
300
nA
1.5
VS = ±15V, VOUT = ±10V
25
0.8
15
μA
V/mV
RL ≥ kΩ
Output Voltage Swing
(1)
2
VS = ±15V, RL = 10 kΩ
±12
±14
±12
±14
V
RL = 2 kΩ
±10
±13
±10
±13
V
These specifications apply for VS = ±15V and −55°C ≤ TA ≤ 125°C, unless otherwise specified. With the LM1458, however, all
specifications are limited to 0°C ≤ TA ≤ 70°C and VS = ±15V.
Submit Documentation Feedback
Copyright © 1998–2013, Texas Instruments Incorporated
Product Folder Links: LM1458 LM1558
LM1458, LM1558
www.ti.com
SNOSBU4D – APRIL 1998 – REVISED MARCH 2013
Electrical Characteristics (1) (continued)
Parameter
Conditions
LM1558
Min
Typ
LM1458
Max
Min
Typ
Units
Max
Input Voltage Range
VS = ±15V
±12
Common Mode
Rejection Ratio
RS ≤ 10 kΩ
±12
V
70
90
70
90
dB
Supply Voltage
Rejection Ratio
RS ≤ 10 kΩ
77
96
77
96
dB
SCHEMATIC DIAGRAM
Numbers in parentheses are pin numbers for amplifier B.
Submit Documentation Feedback
Copyright © 1998–2013, Texas Instruments Incorporated
Product Folder Links: LM1458 LM1558
3
LM1458, LM1558
SNOSBU4D – APRIL 1998 – REVISED MARCH 2013
www.ti.com
REVISION HISTORY
Changes from Revision C (March 2013) to Revision D
•
4
Page
Changed layout of National Data Sheet to TI format ............................................................................................................ 3
Submit Documentation Feedback
Copyright © 1998–2013, Texas Instruments Incorporated
Product Folder Links: LM1458 LM1558
PACKAGE OPTION ADDENDUM
www.ti.com
27-May-2022
PACKAGING INFORMATION
Orderable Device
Status
(1)
Package Type Package Pins Package
Drawing
Qty
Eco Plan
(2)
Lead finish/
Ball material
MSL Peak Temp
Op Temp (°C)
Device Marking
(3)
Samples
(4/5)
(6)
LM1458 MWC
ACTIVE
WAFERSALE
YS
0
1
RoHS & Green
Call TI
Level-1-NA-UNLIM
-40 to 85
LM1458M
NRND
SOIC
D
8
95
Non-RoHS
& Green
Call TI
Level-1-235C-UNLIM
0 to 70
LM
1458M
LM1458M/NOPB
ACTIVE
SOIC
D
8
95
RoHS & Green
SN
Level-1-260C-UNLIM
0 to 70
LM
1458M
LM1458MX
NRND
SOIC
D
8
2500
Non-RoHS
& Green
Call TI
Level-1-235C-UNLIM
0 to 70
LM
1458M
LM1458MX/NOPB
ACTIVE
SOIC
D
8
2500
RoHS & Green
SN
Level-1-260C-UNLIM
0 to 70
LM
1458M
Samples
LM1458N/NOPB
ACTIVE
PDIP
P
8
40
RoHS & Green
NIPDAU
Level-1-NA-UNLIM
0 to 70
LM1458N
Samples
LM1558H
ACTIVE
TO-99
LMC
8
500
Non-RoHS &
Non-Green
Call TI
Call TI
-55 to 125
( LM1558H, LM1558H
)
Samples
LM1558H/NOPB
ACTIVE
TO-99
LMC
8
500
RoHS & Green
Call TI
Level-1-NA-UNLIM
-55 to 125
( LM1558H, LM1558H
)
Samples
MC1558G
ACTIVE
TO-99
LMC
8
500
Non-RoHS &
Non-Green
Call TI
Call TI
-55 to 125
( LM1558H, LM1558H
)
Samples
Samples
(1)
The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2)
RoHS: TI defines "RoHS" to mean semiconductor products that are compliant with the current EU RoHS requirements for all 10 RoHS substances, including the requirement that RoHS substance
do not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, "RoHS" products are suitable for use in specified lead-free processes. TI may
reference these types of products as "Pb-Free".
RoHS Exempt: TI defines "RoHS Exempt" to mean products that contain lead but are compliant with EU RoHS pursuant to a specific EU RoHS exemption.
Green: TI defines "Green" to mean the content of Chlorine (Cl) and Bromine (Br) based flame retardants meet JS709B low halogen requirements of
很抱歉,暂时无法提供与“LM1458N”相匹配的价格&库存,您可以联系我们找货
免费人工找货