LM239A-Q1
QUAD DIFFERENTIAL COMPARATOR
SCLS513B − JULY 2003 − REVISED FEBRUARY 2008
D Qualified for Automotive Applications
D ESD Protection Exceeds 1000 V Per
D
D
D
D
D
D
D
D
D
D
D PACKAGE
(TOP VIEW)
MIL-STD-883, Method 3015; Exceeds 100 V
Using Machine Model (C = 200 pF, R = 0);
Exceeds 2000 V Charged Device Model
Single Supply or Dual Supplies
Wide Range of Supply Voltage
. . . 2 V to 36 V
Low Supply-Current Drain Independent of
Supply Voltage . . . 0.8 mA Typ
Low Input Bias Current . . . 25 nA Typ
Low Input Offset Current . . . 5 nA Typ
Low Input Offset Voltage . . . 2 mV Typ
Common-Mode Input Voltage Range
Includes Ground
Differential Input Voltage Range Equal to
Maximum-Rated Supply Voltage . . . ±36 V
Low Output Saturation Voltage
Output Compatible With TTL, MOS, and
CMOS
1OUT
2OUT
VCC
2IN−
2IN+
1IN−
1IN+
1
14
2
13
3
12
4
11
5
10
6
9
7
8
OUT3
OUT4
GND
4IN+
4IN−
3IN+
3IN−
description/ordering information
This device consists of four independent voltage comparators that are designed to operate from a single power
supply over a wide range of voltages. Operation from dual supplies also is possible as long as the difference
between the two supplies is 2 V to 36 V, and VCC is at least 1.5 V more positive than the input common-mode
voltage. Current drain is independent of the supply voltage. The outputs can be connected to other
open-collector outputs to achieve wired-AND relationships.
ORDERING INFORMATION†
−40°C to 125°C
ORDERABLE
PART NUMBER
PACKAGE‡
TA
SOP − D
Tape and reel
LM239AQDRQ1§
TOP-SIDE
MARKING
LM239AQ1
†
For the most current package and ordering information, see the Package Option Addendum
at the end of this document, or see the TI web site at http://www.ti.com.
‡ Package
drawings, thermal data, and symbolization are available at
http://www.ti.com/packaging.
§ This package is only available taped and reeled, with standard quantities of 2500 pieces per
reel.
symbol (each comparator)
IN+
OUT
IN−
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
Copyright 2008, Texas Instruments Incorporated
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
1
LM239A-Q1
QUAD DIFFERENTIAL COMPARATOR
SCLS513B − JULY 2003 − REVISED FEBRUARY 2008
schematic (each comparator)
VCC
80-µA
Current
Regulator
10 µA
60 µA
10 µA
80 µA
IN+
OUT
IN−
GND
All current values shown are nominal.
absolute maximum ratings over operating free-air temperature range (unless otherwise noted)†
Supply voltage, VCC (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 V
Differential input voltage, VID (see Note 2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±36 V
Input voltage range, VI (either input) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −0.3 V to 36 V
Output voltage, VO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 V
Output current, IO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 mA
Duration of output short circuit to ground (see Note 3) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Unlimited
Package thermal impedance, θJA (see Note 4) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86°C/W
Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 260°C
Maximum operating junction temperature, TJ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 136°C
Storage temperature range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −65°C to 150°C
†
Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and
functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not
implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
NOTES: 1. All voltage values, except differential voltages, are with respect to network ground.
2. Differential voltages are at IN+ with respect to IN−.
3. Short circuits from outputs to VCC can cause excessive heating and eventual destruction.
4. The package thermal impedance is calculated in accordance with JESD 51-7.
2
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
LM239A-Q1
QUAD DIFFERENTIAL COMPARATOR
SCLS513B − JULY 2003 − REVISED FEBRUARY 2008
electrical characteristics at specified free-air temperature, VCC = 5 V (unless otherwise noted)
TEST CONDITIONS†
PARAMETER
VIO
Input offset voltage
VCC = 5 V to 30 V,, VIC = VICR((min),
),
VO = 1.4 V
IIO
Input offset current
VO = 1.4
14V
IIB
Input bias current
VO = 1.4
14V
TA‡
MIN
25°C
MAX
1
2.5
Full range
5.5
25°C
5
Full range
−25
Full range
25°C
Common mode input-voltage
input voltage range
Common-mode
0 to
VCC−1.5
0 to
VCC−2
25°C
50
AVD
Large-signal differential-voltage
amplification
VCC = 15 V, VO = 1.4 V to 11.4 V,
RL ≥ 15 kΩ to VCC
IOH
High level output current
High-level
VID= 1 V
VOL
Low level output voltage
Low-level
VID = −1
1 V,
V
IOL = 4 mA
IOL
Low-level output current
VID = −1 V,
VOL = 1.5 V
25°C
ICC
Supply current (four comparators)
2 5 V,
V
VO = 2.5
No load
25°C
VOH = 5 V
25°C
VOH = 30 V
Full range
200
150
Full range
nA
V/mV
50
nA
1
µA
400
700
6
nA
V
0.1
25°C
mV
−250
−400
Full range
UNIT
50
150
25°C
VICR
TYP
16
08
0.8
mV
mA
2
mA
†
All characteristics are measured with zero common-mode input voltage, unless otherwise specified.
‡ Full range (MIN to MAX) for LM239AQ is −40°C to 125°C. All characteristics are measured with zero common-mode input voltage, unless
otherwise specified.
switching characteristics, VCC = 5 V, TA = 25°C
PARAMETER
Response time
TEST CONDITIONS
RL connected to 5 V through 5.1 kΩ,
CL = 15 pF§, See Note 5
MIN
TYP
100-mV input step with 5-mV overdrive
1.3
TTL-level input step
0.3
MAX
UNIT
µs
§ C includes probe and jig capacitance.
L
NOTE 5: The response time specified is the interval between the input step function and the instant when the output crosses 1.4 V.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
3
PACKAGE OPTION ADDENDUM
www.ti.com
10-Dec-2020
PACKAGING INFORMATION
Orderable Device
Status
(1)
Package Type Package Pins Package
Drawing
Qty
Eco Plan
(2)
Lead finish/
Ball material
MSL Peak Temp
Op Temp (°C)
Device Marking
(3)
(4/5)
(6)
LM239AQDRG4Q1
ACTIVE
SOIC
D
14
2500
RoHS & Green
NIPDAU
Level-1-260C-UNLIM
-40 to 125
LM239AQ1
LM239AQDRQ1
ACTIVE
SOIC
D
14
2500
RoHS & Green
NIPDAU
Level-1-260C-UNLIM
-40 to 125
LM239AQ1
(1)
The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2)
RoHS: TI defines "RoHS" to mean semiconductor products that are compliant with the current EU RoHS requirements for all 10 RoHS substances, including the requirement that RoHS substance
do not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, "RoHS" products are suitable for use in specified lead-free processes. TI may
reference these types of products as "Pb-Free".
RoHS Exempt: TI defines "RoHS Exempt" to mean products that contain lead but are compliant with EU RoHS pursuant to a specific EU RoHS exemption.
Green: TI defines "Green" to mean the content of Chlorine (Cl) and Bromine (Br) based flame retardants meet JS709B low halogen requirements of