LPV358IDGKR

Not Recommended for New Designs LPV321 SINGLE, LPV358 DUAL, LPV324 QUAD GENERAL-PURPOSE, LOW-VOLTAGE, LOW-POWER, RAIL-TO-RAIL OUTPUT OPERATIONAL AMPLIFIERS SLOS433I − FEBRUARY 2004 − REVISED MARCH 2005 D D D D D D D D D D D 2.7-V and 5-V Performance −40°C to 125°C Specification at 5 V No Crossover Distortion Gain Bandwith of 152 kHz Low Supply Current − LPV321 . . . 9 μA − LPV358 . . . 15 μA − LPV324 . . . 28 μA Rail-to-Rail Output Swing at 100-kΩ Load − VCC+ − 3.5 mV − VCC− + 90 mV VICR . . . −0.2 V to VCC+ − 0.8 V Stable With Capacitive Load of 1000 pF Applications − Active Filters − General-Purpose, Low-Voltage Applications − Low-Power and/or Portable Applications Latch-Up Performance Exceeds 100 mA per JESD 78, Class II ESD Protection Exceeds JESD 22 − 2000-V Human-Body Model (A114-A) − 200-V Machine Model (A115-A) − 1000-V Charged-Device Model (C101) LPV321 . . . DBV OR DCK PACKAGE (TOP VIEW) 1 IN+ VCC− IN− 5 VCC+ 4 OUTPUT 2 3 LPV358 . . . D, DDU, OR DGK PACKAGE (TOP VIEW) 1OUT 1IN− 1IN+ VCC− 1 8 2 7 3 6 4 5 VCC+ 2OUT 2IN− 2IN+ LPV324 . . . D OR PW PACKAGE (TOP VIEW) 1OUT 1IN− 1IN+ VCC+ 2IN+ 2IN− 2OUT 1 14 2 13 3 12 4 11 5 10 6 9 7 8 4OUT 4IN− 4IN+ VCC− 3IN+ 3IN− 3OUT description/ordering information The LPV321/358/324 devices are low-power (9 μA per channel at 5 V) versions of the LMV321/358/324 operational amplifiers. These are additions to the LMV321/358/324 family of commodity operational amplifiers. The LPV321/358/324 devices are the most cost-effective solutions for applications where low voltage, low-power operation, space saving, and low price are needed. These devices have rail-to-rail output-swing capability, and the input common-mode voltage range includes ground. They all exhibit excellent speed-power ratios, achieving 152 kHz of bandwidth, with a supply current of only 9 μA typical. The LPV321, LPV358, and LPV324 are characterized for operation from −40°C to 85°C. The LPV321I, LPV358I, and LPV324I are characterized for operation from −40°C to 125°C. Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. Copyright © 2005, Texas Instruments Incorporated PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 1 Not Recommended for New Designs LPV321 SINGLE, LPV358 DUAL, LPV324 QUAD GENERAL-PURPOSE, LOW-VOLTAGE, LOW-POWER, RAIL-TO-RAIL OUTPUT OPERATIONAL AMPLIFIERS SLOS433I − FEBRUARY 2004 − REVISED MARCH 2005 description/ordering information (continued) ORDERING INFORMATION ORDERABLE PART NUMBER PACKAGE† TA SOT23 5 (DBV) SOT23-5 Single SC 70 (DCK) SC-70 SOIC 8 (D) SOIC-8 −40°C to 85°C Dual VSSOP-8 (DDU) VSSOP 8 (DGK) VSSOP-8 SOIC 14 (D) SOIC-14 Quad TSSOP 14 (PW) TSSOP-14 SOT23 5 (DBV) SOT23-5 Single SC 70 (DCK) SC-70 SOIC 8 (D) SOIC-8 −40°C to 125°C Dual VSSOP-8 (DDU) VSSOP 8 (DGK) VSSOP-8 SOIC 14 (D) SOIC-14 Quad TSSOP 14 (PW) TSSOP-14 TOP-SIDE MARKING Reel of 3000 LPV321DBVR 5C7_ Reel of 250 LPV321DBVT PREVIEW Reel of 3000 LPV321DCKR 52_ Reel of 250 LPV321DCKT PREVIEW Tube of 75 LPV358D Reel of 2500 LPV358DR Reel of 3000 LPV358DDUR 5A56 Reel of 2500 LPV358DGKR 546 Reel of 250 LPV358DGKT PREVIEW Tube of 50 LPV324D Reel of 2500 LPV324DR Tube of 90 LPV324PW Reel of 2000 LPV324PWR Reel of 3000 LPV321IDBVR 5C1_ Reel of 250 LPV321IDBVT PREVIEW Reel of 3000 LPV321IDCKR 53_ Reel of 250 LPV321IDCKT PREVIEW Tube of 75 LPV358ID Reel of 2500 LPV358IDR Reel of 3000 LPV358IDDUR 5AE6 Reel of 2500 LPV358IDGKR 556 Reel of 250 LPV358IDGKT PREVIEW Tube of 50 LPV324ID Reel of 2500 LPV324IDR Tube of 90 LPV324IPW Reel of 2000 LPV324IPWR † PV358 LPV324 PV324 PV358I LPV324I PV324I Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at www.ti.com/sc/package. ‡ DBV/DCK: The actual top-side marking has one additional character that designates the assembly/test site. symbol (each amplifier) − IN− OUT 2 + IN+ POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 Not Recommended for New Designs LPV321 SINGLE, LPV358 DUAL, LPV324 QUAD GENERAL-PURPOSE, LOW-VOLTAGE, LOW-POWER, RAIL-TO-RAIL OUTPUT OPERATIONAL AMPLIFIERS SLOS433I − FEBRUARY 2004 − REVISED MARCH 2005 LPV324 simplified schematic VCC VBIAS1 + VCC − VBIAS2 + Output − VCC VCC VBIAS3 + IN− IN+ VBIAS4− + − absolute maximum ratings over operating free-air temperature range (unless otherwise noted)† Supply voltage, VCC+ − VCC− (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.5 V Differential input voltage, VID (see Note 2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±VCC Input voltage range, VI (either input) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . VCC− to VCC+ − 1 V Package thermal impedance, θJA (see Notes 3 and 4): 5-pin DBV package . . . . . . . . . . . . . . . . . . . 206°C/W 5-pin DCK package . . . . . . . . . . . . . . . . . . . 252°C/W 8-pin D package . . . . . . . . . . . . . . . . . . . . . . . 97°C/W 8-pin DDU package . . . . . . . . . . . . . . . . . . TBD°C/W 8-pin DGK package . . . . . . . . . . . . . . . . . . . 172°C/W 14-pin D package . . . . . . . . . . . . . . . . . . . . . . 86°C/W 14-pin PW package . . . . . . . . . . . . . . . . . . . 113°C/W Maximum junction temperature, TJ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150°C Storage temperature range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −65°C to 150°C † Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. NOTES: 1. All voltage values, except differential voltages and VCC specified for the measurement of IOS, are with respect to the network GND. 2. Differential voltages are at IN+ with respect to IN−. 3. Maximum power dissipation is a function of TJ(max), θJA, and TA. The maximum allowable power dissipation at any allowable ambient temperature is PD = (TJ(max) − TA)/θJA. Selecting the maximum of 150°C can affect reliability. 4. The package thermal impedance is calculated in accordance with JESD 51-7. POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 3 Not Recommended for New Designs LPV321 SINGLE, LPV358 DUAL, LPV324 QUAD GENERAL-PURPOSE, LOW-VOLTAGE, LOW-POWER, RAIL-TO-RAIL OUTPUT OPERATIONAL AMPLIFIERS SLOS433I − FEBRUARY 2004 − REVISED MARCH 2005 recommended operating conditions MIN VCC TA Supply voltage free air temperature Operating free-air MAX 2.7 5 LPV3xx −40 85 LPV3xxI −40 125 UNIT V °C ESD protection TEST CONDITIONS Human-Body Model Machine model Charged-Device Model 4 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 TYP UNIT 2 kV 200 V 1 kV Not Recommended for New Designs LPV321 SINGLE, LPV358 DUAL, LPV324 QUAD GENERAL-PURPOSE, LOW-VOLTAGE, LOW-POWER, RAIL-TO-RAIL OUTPUT OPERATIONAL AMPLIFIERS SLOS433I − FEBRUARY 2004 − REVISED MARCH 2005 2.7-V electrical characteristics TA = 25°C, VCC+ = 2.7 V, VCC− = 0 V, VIC = 1 V, VO = VCC+/2, and RL > 1 MΩ (unless otherwise noted) PARAMETER TEST CONDITIONS MIN TYP† MAX 1.2 7 UNIT VIO Input offset voltage αVIO Average temperature coefficient of input offset voltage IIB Input bias current 1.7 50 nA IIO Input offset current 0.6 40 nA CMRR Common-mode rejection ratio 0 ≤ VIC ≤ 1.7 V 50 70 dB kSVR Supply-voltage rejection ratio 2.7 V ≤ VCC+ ≤ 5 V, VIC = 1 V, VO = 1 V 50 65 dB VICR Common-mode input voltage range CMRR ≥ 50 dB 0 to 1.7 −0.2 to 1.9 V VO Output swing RL = 100 kΩ to 1 1.35 35 V VCC+ − 0.100 VCC+ − 0.003 Low level LPV321 ICC Supply current mV/°C 4 High level LPV358 (both amplifiers) LPV324 (all four amplifiers) 0.080 mV 0.180 4 8 8 16 16 24 V mA SR Slew rate‡ 0.1 V/ms GBW Gain bandwidth product CL = 22 pF (see Note 5) 205 kHz Fm Phase margin CL = 22 pF (see Note 5) 71 deg Gain margin CL = 22 pF (see Note 5) 11 dB Vn Equivalent input noise voltage f = 1 kHz 178 nV/√Hz In Equivalent input noise current f = 1 kHz 0.5 pA/√Hz † All typical values are at VCC = 2.7 V, TA = 25°C. Number specified is the slower of the positive and negative slew rates. NOTE 5: Closed-loop gain = 18 dB, VIC = VCC+/2 ‡ POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 5 Not Recommended for New Designs LPV321 SINGLE, LPV358 DUAL, LPV324 QUAD GENERAL-PURPOSE, LOW-VOLTAGE, LOW-POWER, RAIL-TO-RAIL OUTPUT OPERATIONAL AMPLIFIERS SLOS433I − FEBRUARY 2004 − REVISED MARCH 2005 5-V electrical characteristics TA = 25°C, VCC+ = 5 V, VCC− = 0 V, VIC = 2 V, VO = VCC+/2, and RL > 1 MΩ (unless otherwise noted) PARAMETER TEST CONDITIONS TA MIN 25°C VIO Input offset voltage TYP† MAX 1.5 7 −40°C to 85°C 10 −40°C to 125°C 11 UNIT mV αVIO Average temperature coefficient of input offset voltage IIB Input bias current CMRR Common-mode rejection ratio 0 ≤ VIC ≤ 4 V 25°C 50 71 dB kSVR Supply-voltage rejection ratio 2.7 V ≤ VCC+ ≤ 5 V, VIC = 1 V, VO = 1 V 25°C 50 65 dB VICR Common-mode input voltage range CMRR ≥ 50 dB 25°C 0 to 4 25°C 4 25°C 2 Input offset current High Hi h level VO Output swing RL = 100 kΩ to 2 5V 2.5 60 −40°C to 125°C 65 −0.2 to 4.2 0.6 −40°C to 125°C 55 25°C VCC+ − 0.100 VCC+ − 0.200 −40°C to 125°C VCC+ − 0.225 IOS Output short-circuit short circuit current Sinking, VO = 5 V 0.090 −40°C to 85°C 25°C 17 20 72 9 15 24 −40°C to 125°C 80 28 −40°C to 85°C SR§ L i l Large-signal voltage gain RL = 100 kΩ Slew rate 15 −40°C to 85°C 10 −40°C to 125°C 10 25°C 100 V/mV 0.1 All typical values are at VCC = 5 V, TA = 25°C. RL is connected to VCC−. The output voltage is 0.5 V ≤ VO ≤ 4.5 V. § Number specified is the slower of the positive and negative slew rates. Connected as a voltage follower with 3-V step input. ‡ 6 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 42 125 25°C † mA 46 −40°C to 125°C AV‡ 20 −40°C to 85°C 25°C LPV324 (all four amplifiers) 12 40 25°C LPV358 (both amplifiers) mA 15 −40°C to 125°C Supply current V 0.240 2 25°C ICC 0.180 0.220 −40°C to 85°C LPV321 nA VCC+ − 0.0035 −40°C to 125°C Sourcing, VO = 0 V 40 50 −40°C to 85°C nA V −40°C to 85°C 25°C Low L level 50 −40°C to 85°C 25°C IIO mV/°C V/ms Not Recommended for New Designs LPV321 SINGLE, LPV358 DUAL, LPV324 QUAD GENERAL-PURPOSE, LOW-VOLTAGE, LOW-POWER, RAIL-TO-RAIL OUTPUT OPERATIONAL AMPLIFIERS SLOS433I − FEBRUARY 2004 − REVISED MARCH 2005 5-V electrical characteristics TA = 25°C, VCC+ = 5 V, VCC− = 0 V, VIC = 2 V, VO = VCC+/2, and RL > 1 MΩ (unless otherwise noted) (continued) PARAMETER TEST CONDITIONS TA MIN TYP† MAX UNIT GBW Gain bandwidth product CL = 22 pF (see Note 5) 25°C 237 kHz Fm Phase margin CL = 22 pF (see Note 5) 25°C 74 deg Gain margin CL = 22 pF (see Note 5) 25°C 12 dB Vn Equivalent input noise voltage f = 1 kHz 25°C 146 nV/√Hz In Equivalent input noise current f = 1 kHz 25°C 0.3 pA/√Hz † All typical values are at VCC = 5 V, TA = 25°C. NOTE 5: Closed-loop gain = 18 dB, VIC = VCC+/2 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 7 Not Recommended for New Designs LPV321 SINGLE, LPV358 DUAL, LPV324 QUAD GENERAL-PURPOSE, LOW-VOLTAGE, LOW-POWER, RAIL-TO-RAIL OUTPUT OPERATIONAL AMPLIFIERS SLOS433I − FEBRUARY 2004 − REVISED MARCH 2005 SUPPLY CURRENT vs SUPPLY VOLTAGE (LPV324 − All Channels) INPUT BIAS CURRENT vs TEMPERATURE 6 25 IB, IIB − Input Bias Current − nA ICC − Supply Current − A 30 TA = 85C TA = 40C TA = 25C 20 15 10 5 1 2 3 4 5 VCC+ = 5 V VIN = VCC+/2 4 3 2 1 0 −40 0 0 5 6 −20 0 VCC+ − Supply Voltage − V SOURCING CURRENT vs OUTPUT VOLTAGE 80 100 1K 100 100 IO − Source Current − mA IO − Source Current − mA 60 SOURCING CURRENT vs OUTPUT VOLTAGE 1K VCC+ = 2.7 V 10 1 0.1 0.01 0.01 0.1 1 10 VCC+ = 5 V 10 1 0.1 0.01 0.001 0.001 Output Voltage Referenced to V+ − V 0.01 0.1 Figure 4 POST OFFICE BOX 655303 1 Output Voltage Referenced to V+ − V Figure 3 8 40 Figure 2 Figure 1 0.001 0.001 20 TA − Temperature − C • DALLAS, TEXAS 75265 10 Not Recommended for New Designs LPV321 SINGLE, LPV358 DUAL, LPV324 QUAD GENERAL-PURPOSE, LOW-VOLTAGE, LOW-POWER, RAIL-TO-RAIL OUTPUT OPERATIONAL AMPLIFIERS SLOS433I − FEBRUARY 2004 − REVISED MARCH 2005 SINKING CURRENT vs OUTPUT VOLTAGE SINKING CURRENT vs OUTPUT VOLTAGE 1k 1k VCC+ = 5 V 100 VCC+ = 2.7 V IO − Sink Current − mA IO − Sink Current − mA 100 10 1 0.1 10 1 0.1 0.01 0.01 0.001 0.001 0.01 0.1 1 0.001 0.001 10 Output Voltage Referenced to GND − V Figure 5 RL = 10 kΩ 180 Negative Swing RL = 100 kΩ 140 120 100 80 Positive Swing RL = 10 kΩ 40 20 Input Voltage Noise − nV/Hz Output Voltage From Supply Voltage − mV 10 220 Rl Terminated to Opposing Supply Rail 200 60 1 INPUT VOLTAGE NOISE vs FREQUENCY 240 160 0.1 Figure 6 OUTPUT VOLTAGE SWING vs SUPPLY VOLTAGE 220 0.01 Output Voltage Referenced to GND − V 200 VCC+ = 2.7 V 180 160 VCC+ = 5 V 140 120 RL = 100 kΩ 0 2.5 3 3.5 4 4.5 5 5.5 100 10 100 VCC+ − Supply Voltage − V Frequency − Hz Figure 7 Figure 8 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 1k 9 Not Recommended for New Designs LPV321 SINGLE, LPV358 DUAL, LPV324 QUAD GENERAL-PURPOSE, LOW-VOLTAGE, LOW-POWER, RAIL-TO-RAIL OUTPUT OPERATIONAL AMPLIFIERS SLOS433I − FEBRUARY 2004 − REVISED MARCH 2005 INPUT CURRENT NOISE vs FREQUENCY CROSSTALK REJECTION vs FREQUENCY 140 0.40 130 VCC+ = 2.7 V Crosstalk Rejection − dB 0.30 0.25 0.20 VCC+ = 5 V 0.15 0.10 0.05 120 110 100 90 80 70 VCC+ = 5 V RL = 100 k AV = 1 VI = 3 VPP 60 50 0.00 10 100 1k 40 100 10k 1k Frequency − Hz 10k Figure 9 Figure 10 PSRR vs FREQUENCY FREQUENCY vs RL 85 180 40 VCC+ = 5 V, +PSRR 75 RL = 10 kΩ 65 VCC+ = 2.7 V RL = 10 kΩ RL = 100 kΩ Phase 30 VCC+ = 2.7 V, +PSRR 25 Gain 80 10 60 40 VCC+ = −2.7 V, −PSRR 0 20 −5 −15 100 0 1k 10k 100k 1M −10 1k Frequency − Hz 10k 100k Frequency − Hz Figure 11 10 140 100 20 15 5 160 120 VCC+ = −5 V, −PSRR 45 Gain − dB PSRR − dB 55 35 100k Frequency − Hz Figure 12 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 1M −20 10M Phase Margin − Deg Input Current Noise − pA/Hz 0.35 Not Recommended for New Designs LPV321 SINGLE, LPV358 DUAL, LPV324 QUAD GENERAL-PURPOSE, LOW-VOLTAGE, LOW-POWER, RAIL-TO-RAIL OUTPUT OPERATIONAL AMPLIFIERS SLOS433I − FEBRUARY 2004 − REVISED MARCH 2005 FREQUENCY vs RL FREQUENCY RESPONSE vs CL 140 Gain VCC+ = 5 V RL = 10 kΩ RL = 100 kΩ 80 60 40 0 Gain − dB 100 20 20 100k 20 CL = 22 pF CL = 200 pF CL = 1,000 pF 1k SLEW RATE vs SUPPLY VOLTAGE 0.13 100 0.12 80 0.11 60 Gain 40 20 20 0 10 −20 VCC+ = 5.0 V CL = 22 pF CL = 200 pF CL = 1,000 pF 100k Slew Rate − V/s 120 Phase Margin − Deg 30 Gain − dB −60 10M 1M Figure 14 FREQUENCY RESPONSE vs CL 10k 100k Frequency − Hz Phase −10 1k −40 10k Figure 13 0 −20 −10 1M Frequency − Hz 40 80 40 10 0 −20 10k 100 60 Gain 0 1k 120 0 20 −10 CL = 22 pF CL = 200 pF CL = 1000 pF 30 Phase Margin − Deg Gain − dB 120 VCC+ = 2.7 V Phase 160 Phase 30 10 140 40 Phase Margin − Deg 180 40 0.1 0.09 0.08 Falling Edge 0.07 0.06 −40 0.05 −60 0.04 −80 1M Positive Edge Open Loop VID = 100 mV VCC+ = 5 V 0.03 2.5 3 3.5 4 4.5 5 5.5 VCC − Supply Voltage − V Frequency − Hz Figure 16 Figure 15 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 11 Not Recommended for New Designs LPV321 SINGLE, LPV358 DUAL, LPV324 QUAD GENERAL-PURPOSE, LOW-VOLTAGE, LOW-POWER, RAIL-TO-RAIL OUTPUT OPERATIONAL AMPLIFIERS SLOS433I − FEBRUARY 2004 − REVISED MARCH 2005 NONINVERTING SMALL-SIGNAL PULSE RESPONSE NONINVERTING LARGE-SIGNAL PULSE RESPONSE 0.16 Input − 20 mV/Div Input − 1 V/Div 4 3 TA = 25°C RL = 10 kΩ VCC = 5 V/0 V AV = 1 2 1 0 0.12 0.08 0.04 VI = 100 mV/0 V 0 −1 100 s/Div −0.04 0.16 Output − 20 mV/Div Output − 1 V/Div 4 100 s/Div 3 2 TA = 25°C RL = 10 kΩ VCC = 5 V/0 V AV = 1 1 0 0.12 0.08 TA = 25°C VCC+ = 5 V/0 V RL = 10 kΩ AV = 1 0.04 0 −1 100 s/Div 100 s/Div Figure 18 Figure 17 INVERTING LARGE-SIGNAL PULSE RESPONSE INVERTING SMALL-SIGNAL PULSE RESPONSE Input − 20 mV/Div Input − 1 V/Div 6 4 2 0 −2 TA = 25°C 0.08 0.04 0 −0.04 −0.08 −4 100 s/Div TA = 25°C RL = 10 kΩ VCC+ = 5 V AV = −5 Rf = 10 kΩ Ri = 2 kΩ 0 −2 −4 Output − 20 mV/Div Output − 1 V/Div 2 0.16 0.12 AV = −5 Rf = 10 kΩ Ri = 2 kΩ 0.04 0 100 s/Div TA = 25°C RL = 10 kΩ VCC+ = 5 V 0.08 100 s/Div Figure 20 Figure 19 12 100 s/Div 0.20 6 4 TA = 25 C POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 PACKAGE OPTION ADDENDUM www.ti.com 2-Jun-2014 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Pins Package Drawing Qty Eco Plan Lead/Ball Finish MSL Peak Temp (2) (6) (3) Op Temp (°C) (4/5) LPV321DBVR OBSOLETE SOT-23 DBV 5 TBD Call TI Call TI -40 to 85 LPV321DBVRE4 OBSOLETE SOT-23 DBV 5 TBD Call TI Call TI -40 to 85 LPV321DBVRG4 OBSOLETE SOT-23 DBV 5 TBD Call TI Call TI -40 to 85 LPV321DCKR OBSOLETE SC70 DCK 5 TBD Call TI Call TI -40 to 85 -40 to 85 LPV321DCKRE4 OBSOLETE SC70 DCK 5 TBD Call TI Call TI LPV321DCKRG4 OBSOLETE SC70 DCK 5 TBD Call TI Call TI -40 to 85 LPV321IDBVR OBSOLETE SOT-23 DBV 5 TBD Call TI Call TI -40 to 125 LPV321IDBVRE4 OBSOLETE SOT-23 DBV 5 TBD Call TI Call TI -40 to 125 LPV321IDBVRG4 OBSOLETE SOT-23 DBV 5 TBD Call TI Call TI -40 to 125 LPV321IDCKR OBSOLETE SC70 DCK 5 TBD Call TI Call TI -40 to 125 LPV321IDCKRE4 OBSOLETE SC70 DCK 5 TBD Call TI Call TI -40 to 125 LPV321IDCKRG4 OBSOLETE SC70 DCK 5 TBD Call TI Call TI -40 to 125 LPV324D OBSOLETE SOIC D 14 TBD Call TI Call TI -40 to 85 LPV324DE4 OBSOLETE SOIC D 14 TBD Call TI Call TI -40 to 85 LPV324DG4 OBSOLETE SOIC D 14 TBD Call TI Call TI -40 to 85 LPV324DR OBSOLETE SOIC D 14 TBD Call TI Call TI -40 to 85 LPV324DRE4 OBSOLETE SOIC D 14 TBD Call TI Call TI -40 to 85 LPV324DRG4 OBSOLETE SOIC D 14 TBD Call TI Call TI -40 to 85 LPV324ID OBSOLETE SOIC D 14 TBD Call TI Call TI -40 to 125 LPV324IDE4 OBSOLETE SOIC D 14 TBD Call TI Call TI -40 to 125 LPV324IDG4 OBSOLETE SOIC D 14 TBD Call TI Call TI -40 to 125 LPV324IDR OBSOLETE SOIC D 14 TBD Call TI Call TI -40 to 125 LPV324IDRE4 OBSOLETE SOIC D 14 TBD Call TI Call TI -40 to 125 LPV324IDRG4 OBSOLETE SOIC D 14 TBD Call TI Call TI -40 to 125 LPV324IPW OBSOLETE TSSOP PW 14 TBD Call TI Call TI -40 to 125 LPV324IPWE4 OBSOLETE TSSOP PW 14 TBD Call TI Call TI -40 to 125 LPV324IPWG4 OBSOLETE TSSOP PW 14 TBD Call TI Call TI -40 to 125 LPV324IPWR OBSOLETE TSSOP PW 14 TBD Call TI Call TI -40 to 125 LPV324IPWRE4 OBSOLETE TSSOP PW 14 TBD Call TI Call TI -40 to 125 LPV324IPWRG4 OBSOLETE TSSOP PW 14 TBD Call TI Call TI -40 to 125 Addendum-Page 1 Device Marking (5C7B ~ 5C7I) (52B ~ 52I) (5C1B ~ 5C1I) (53B ~ 53I) LPV324 LPV324 LPV324I LPV324I PV324I PV324I Samples PACKAGE OPTION ADDENDUM www.ti.com 2-Jun-2014 Orderable Device Status (1) Package Type Package Pins Package Drawing Qty Eco Plan Lead/Ball Finish MSL Peak Temp (2) (6) (3) Op Temp (°C) Device Marking (4/5) LPV324PW OBSOLETE TSSOP PW 14 TBD Call TI Call TI -40 to 85 LPV324PWE4 OBSOLETE TSSOP PW 14 TBD Call TI Call TI -40 to 85 LPV324PWG4 OBSOLETE TSSOP PW 14 TBD Call TI Call TI -40 to 85 PV324 LPV324PWR OBSOLETE TSSOP PW 14 TBD Call TI Call TI -40 to 85 LPV324PWRE4 OBSOLETE TSSOP PW 14 TBD Call TI Call TI -40 to 85 LPV324PWRG4 OBSOLETE TSSOP PW 14 TBD Call TI Call TI -40 to 85 LPV358D OBSOLETE SOIC D 8 TBD Call TI Call TI -40 to 85 PV358 LPV358DDUR OBSOLETE VSSOP DDU 8 TBD Call TI Call TI -40 to 85 5A56 LPV358DDURE4 OBSOLETE VSSOP DDU 8 TBD Call TI Call TI -40 to 85 LPV358DDURG4 OBSOLETE VSSOP DDU 8 TBD Call TI Call TI -40 to 85 LPV358DE4 OBSOLETE SOIC D 8 TBD Call TI Call TI -40 to 85 PV324 LPV358DG4 OBSOLETE SOIC D 8 TBD Call TI Call TI -40 to 85 LPV358DGKR OBSOLETE VSSOP DGK 8 TBD Call TI Call TI -40 to 85 LPV358DGKRG4 OBSOLETE VSSOP DGK 8 TBD Call TI Call TI -40 to 85 LPV358DR OBSOLETE SOIC D 8 TBD Call TI Call TI -40 to 85 LPV358DRE4 OBSOLETE SOIC D 8 TBD Call TI Call TI -40 to 85 LPV358DRG4 OBSOLETE SOIC D 8 TBD Call TI Call TI -40 to 85 LPV358ID OBSOLETE SOIC D 8 TBD Call TI Call TI -40 to 125 PV358I LPV358IDDUR OBSOLETE VSSOP DDU 8 TBD Call TI Call TI -40 to 125 5AE6 LPV358IDDURE4 OBSOLETE VSSOP DDU 8 TBD Call TI Call TI -40 to 125 LPV358IDDURG4 OBSOLETE VSSOP DDU 8 TBD Call TI Call TI -40 to 125 LPV358IDE4 OBSOLETE SOIC D 8 TBD Call TI Call TI -40 to 125 LPV358IDG4 OBSOLETE SOIC D 8 TBD Call TI Call TI -40 to 125 LPV358IDGKR OBSOLETE VSSOP DGK 8 TBD Call TI Call TI -40 to 125 LPV358IDGKRG4 OBSOLETE VSSOP DGK 8 TBD Call TI Call TI -40 to 125 LPV358IDR OBSOLETE SOIC D 8 TBD Call TI Call TI -40 to 125 LPV358IDRE4 OBSOLETE SOIC D 8 TBD Call TI Call TI -40 to 125 LPV358IDRG4 OBSOLETE SOIC D 8 TBD Call TI Call TI -40 to 125 (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. Addendum-Page 2 546 PV358 556 PV358I Samples PACKAGE OPTION ADDENDUM www.ti.com 2-Jun-2014 PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability information and additional product content details. TBD: The Pb-Free/Green conversion plan has not been defined. Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes. Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above. Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material) (3) MSL, Peak Temp. - The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. (4) There may be additional marking, which relates to the logo, the lot trace code information, or the environmental category on the device. (5) Multiple Device Markings will be inside parentheses. Only one Device Marking contained in parentheses and separated by a "~" will appear on a device. If a line is indented then it is a continuation of the previous line and the two combined represent the entire Device Marking for that device. (6) Lead/Ball Finish - Orderable Devices may have multiple material finish options. Finish options are separated by a vertical ruled line. Lead/Ball Finish values may wrap to two lines if the finish value exceeds the maximum column width. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. Addendum-Page 3 IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All semiconductor products (also referred to herein as “components”) are sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI’s terms and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily performed. TI assumes no liability for applications assistance or the design of Buyers’ products. Buyers are responsible for their products and applications using TI components. To minimize the risks associated with Buyers’ products and applications, Buyers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions. Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use of any TI components in safety-critical applications. In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI’s goal is to help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and requirements. Nonetheless, such components are subject to these terms. No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties have executed a special agreement specifically governing such use. Only those TI components which TI has specifically designated as military grade or “enhanced plastic” are designed and intended for use in military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and regulatory requirements in connection with such use. TI has specifically designated certain components as meeting ISO/TS16949 requirements, mainly for automotive use. In any case of use of non-designated products, TI will not be responsible for any failure to meet ISO/TS16949. Products Applications Audio www.ti.com/audio Automotive and Transportation www.ti.com/automotive Amplifiers amplifier.ti.com Communications and Telecom www.ti.com/communications Data Converters dataconverter.ti.com Computers and Peripherals www.ti.com/computers DLP® Products www.dlp.com Consumer Electronics www.ti.com/consumer-apps DSP dsp.ti.com Energy and Lighting www.ti.com/energy Clocks and Timers www.ti.com/clocks Industrial www.ti.com/industrial Interface interface.ti.com Medical www.ti.com/medical Logic logic.ti.com Security www.ti.com/security Power Mgmt power.ti.com Space, Avionics and Defense www.ti.com/space-avionics-defense Microcontrollers microcontroller.ti.com Video and Imaging www.ti.com/video RFID www.ti-rfid.com OMAP Applications Processors www.ti.com/omap TI E2E Community e2e.ti.com Wireless Connectivity www.ti.com/wirelessconnectivity Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright © 2016, Texas Instruments Incorporated