OPA
OPA2
356
OPA
OPA356
OPA2356
2356
356
SBOS212A – NOVEMBER, 2001
200MHz, CMOS
OPERATIONAL AMPLIFIER
FEATURES
DESCRIPTION
● UNITY-GAIN BANDWIDTH: 450MHz
The OPAx356 series high-speed, voltage-feedback CMOS
operational amplifiers are designed for video and other
applications requiring wide bandwidth. The OPAx356 is unity
gain stable and can drive large output currents. Differential
gain is 0.02% and differential phase is 0.05°. Quiescent
current is only 8.3mA per channel.
● WIDE BANDWIDTH: 200MHz GBW
● HIGH SLEW RATE: 360V/µs
● LOW NOISE: 5.8nV/√Hz
● EXCELLENT VIDEO PERFORMANCE:
DIFF GAIN: 0.02%, DIFF PHASE: 0.05°
0.1dB GAIN FLATNESS: 75MHz
OPAx356 is optimized for operation on single or dual supplies as low as 2.5V (±1.25V) and up to 5.5V (±2.75V).
Common-mode input range for the OPAx356 extends 100mV
below ground and up to 1.5V from V+. The output swing is
within 100mV of the rails, supporting wide dynamic range.
● INPUT RANGE INCLUDES GROUND
● RAIL-TO-RAIL OUTPUT (within 100mV)
● LOW INPUT BIAS CURRENT: 3pA
● THERMAL SHUTDOWN
● SINGLE-SUPPLY OPERATING RANGE: 2.5V to 5.5V
● MicroSIZE PACKAGES
APPLICATIONS
● VIDEO PROCESSING
● ULTRASOUND
● OPTICAL NETWORKING, TUNABLE LASERS
● PHOTODIODE TRANSIMPEDANCE AMPS
The OPAx356 series is available in single (SOT23-5 and SO-8),
and dual (MSOP-8 and SO-8) versions. Multichannel versions
feature completely independent circuitry for lowest crosstalk and
freedom from interaction. All are specified over the extended
–40°C to +125°C range.
OPAx356 RELATED PRODUCTS
FEATURES
PRODUCT
200MHz, Rail-to-Rail Output, CMOS, Shutdown
38MHz, Rail-to-Rail Input/Output, CMOS
75MHz, Rail-to-Rail Output
150MHz, Rail-to-Rail Output
Differential Input/Output, 3.3V Supply
OPAx355
OPAx350
OPAx631
OPAx634
THS412x
● ACTIVE FILTERS
V+
● HIGH-SPEED INTEGRATORS
–VIN
● ANALOG-TO-DIGITAL (A/D) CONVERTER
INPUT BUFFERS
OPA356
Out
+VIN
● DIGITAL-TO-ANALOG (D/A) CONVERTER
OUTPUT AMPLIFIERS
V–
● BARCODE SCANNERS
● COMMUNICATIONS
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
Copyright © 2001, Texas Instruments Incorporated
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
www.ti.com
ABSOLUTE MAXIMUM RATINGS(1)
ELECTROSTATIC
DISCHARGE SENSITIVITY
Supply Voltage, V+ to V– ................................................................... 7.5V
Signal Input Terminals, Voltage(2) .................... (V–) – 0.5V to (V+) + 0.5V
Current(2) ..................................................... 10mA
Output Short-Circuit(3) .............................................................. Continuous
Operating Temperature .................................................. –55°C to +150°C
Storage Temperature ...................................................... –65°C to +150°C
Junction Temperature .................................................................... +160°C
Lead Temperature (soldering, 10s) ............................................... +300°C
This integrated circuit can be damaged by ESD. Texas Instruments recommends that all integrated circuits be handled with
appropriate precautions. Failure to observe proper handling
and installation procedures can cause damage.
ESD damage can range from subtle performance degradation
to complete device failure. Precision integrated circuits may be
more susceptible to damage because very small parametric
changes could cause the device not to meet its published
specifications.
NOTE: (1) Stresses above these ratings may cause permanent damage.
Exposure to absolute maximum conditions for extended periods may degrade
device reliability. These are stress ratings only, and functional operation of the
device at these or any other conditions beyond those specified is not implied.
(2) Input terminals are diode-clamped to the power-supply rails. Input signals
that can swing more than 0.5V beyond the supply rails should be current limited
to 10mA or less. (3) Short-circuit to ground one amplifier per package.
PACKAGE/ORDERING INFORMATION
PRODUCT
OPA356AIDBV
PACKAGE-LEAD
PACKAGE
DESIGNATOR(1)
SPECIFIED
TEMPERATURE
RANGE
PACKAGE
MARKING
ORDERING
NUMBER(2)
TRANSPORT
MEDIA, QUANTITY
OPA356AIDBVT
OPA356AIDBVR
Tape and Reel, 250
Tape and Reel, 3000
OPA356AID
OPA356AIDR
Rails, 100
Tape and Reel, 2500
OPA2356AIDGKT
OPA2356AIDGKR
Tape and Reel, 250
Tape and Reel, 2500
OPA2356AID
OPA2356AIDR
Rails, 100
Tape and Reel, 2500
SOT23-5
DBV
–40°C to +125°C
OAAI
"
"
"
"
"
OPA356AID
SO-8
D
–40°C to +125°C
OPA356A
"
"
"
"
"
OPA2356AIDGK
MSOP-8
DGK
–40°C to +125°C
AYI
"
"
"
"
"
OPA2356AID
SO-8
D
–40°C to +125°C
OPA2356A
"
"
"
"
"
NOTES: (1) For the most current specifications and package information, refer to our web site at www.ti.com. (2) Models labeled with “T” indicate smaller quantity
tape and reel, “R” indicates large quantity tape and reel and “D” indicates rails of specified quantity.
PIN CONFIGURATIONS
Top View
OPA356
OPA2356
OPA356
NC(1)
Out 1
5
1
8
NC(1)
Out A
1
7
V+
–In A
2
6
Out
5
NC(1)
8
V+
7
Out B
6
–In B
5
+In B
V+
–In
2
V– 2
A
+In
+In 3
4
3
+In A
3
B
–In
V–
4
V–
4
SOT23
SO
MSOP, SO
NOTE: (1) NC means no internal connection.
2
OPA356, 2356
SBOS212A
ELECTRICAL CHARACTERISTICS: VS = +2.7V to +5.5V Single Supply
Boldface limits apply over the specified temperature range, TA = –40°C to +125°C.
At TA = +25°C, RF = 604Ω, RL = 150Ω, Connected to VS/2, unless otherwise noted.
OPA356AIDBV, AID,
OPA2356AIDGK, AID
PARAMETER
CONDITION
OFFSET VOLTAGE
Input Offset Voltage
VOS
dVOS/dT
PSRR
vs Temperature
vs Power Supply
INPUT BIAS CURRENT
Input Bias Current
Input Offset Current
MIN
±2
VS = +5V
Specified Temperature Range
Specified Temperature Range
VS = +2.7V to +5.5V, VCM = VS/2 – 0.15V
IB
IOS
NOISE
Input Noise Voltage Density
Current Noise Density
en
in
INPUT VOLTAGE RANGE
Common-Mode Voltage Range
Common-Mode Rejection Ratio
VCM
CMRR
f = 1MHz
f = 1MHz
OPA356
OPA2356
FREQUENCY RESPONSE
Small-Signal Bandwidth
Gain-Bandwidth Product
Bandwidth for 0.1dB Gain Flatness
Slew Rate
Rise-and-Fall Time
Settling Time, 0.1%
0.01%
Overload Recovery Time
Harmonic Distortion
2nd Harmonic
3rd Harmonic
Differential Gain Error
Differential Phase Error
Channel-to-Channel Crosstalk
OUTPUT
Voltage Output Swing from Rail
Voltage Output Swing from Rail
Voltage Output Swing from Rail
Ouput Current, Continuous(1)
Maximum Output Current, Peak(1)
Maximum Output Current, Peak(1)
Short Circuit Current
Closed-Loop Output Impedance
POWER SUPPLY
Specified Voltage Range
Operating Voltage Range
Quiescent Current (per amplifier)
OPA356, 2356
SBOS212A
f–3dB
f–3dB
f–3dB
f–3dB
GBW
f0.1dB
SR
OPA2356
IO
IO
IO
UNITS
±9
±7
±80
±350
mV
mV
µV/°C
µV/V
3
±1
±50
±50
pA
pA
±15
(V–) – 0.1
66
66
nV/√Hz
fA/√Hz
80
V
dB
dB
1013 || 1.5
1013 || 1.5
Ω || pF
Ω || pF
92
dB
dB
dB
G = +1, VO = 100mVp-p, RF = 0Ω
G = +2, VO = 100mVp-p, RL = 50Ω
G = +2, VO = 100mVp-p, RL = 150Ω
G = +2, VO = 100mVp-p, RL = 1kΩ
G = +10, RL = 1kΩ
G = +2, VO = 100mVp-p, RF = 560Ω
VS = +5V, G = +2, 4V Output Step
G = +2, VO = 200mVp-p, 10% to 90%
G = +2, VO = 2Vp-p, 10% to 90%
VS = +5V, G = +2, 2V Output Step
VS = +5V, G = +2, 2V Output Step
VIN • Gain = VS
450
100
170
200
200
75
300/–360
2.4
8
30
120
8
MHz
MHz
MHz
MHz
MHz
MHz
V/µs
ns
ns
ns
ns
ns
G = +2, f = 1MHz, VO = 2Vp-p, RL = 200Ω
G = +2, f = 1MHz, VO = 2Vp-p, RL = 200Ω
NTSC, RL = 150Ω
NTSC, RL = 150Ω
f = 5MHz
–81
–93
0.02
0.05
–90
dBc
dBc
%
degrees
dB
VS = +5V, RL = 150Ω, AOL > 84dB
VS = +5V, RL = 1kΩ
IO = ±100mA
0.2
0.1
0.8
VS = +5.5V, –0.1V < VCM < +4.0V
Specified Temperature Range
VS = +5V, 0.3V < VO < 4.7V
VS = +5V, 0.3V < VO < 4.7V
VS = +5V, 0.4V < VO < 4.6V
VS = +5V
VS = +3V
84
80
80
(V+) – 1.5
VS = +5V, IO = 0
Specified Temperature Range
1
±80
+250/ –200
0.02
2.7
VS
0.3
±60
±100
f < 100kHz
IQ
MAX
5.8
50
INPUT IMPEDANCE
Differential
Common-Mode
OPEN-LOOP GAIN
TYP
5.5
2.5 to 5.5
8.3
11
14
V
V
V
mA
mA
mA
mA
Ω
V
V
mA
mA
3
ELECTRICAL CHARACTERISTICS: VS = +2.7V to +5.5V Single Supply (Cont.)
Boldface limits apply over the specified temperature range, TA = –40°C to +125°C.
At TA = +25°C, RF = 604Ω, RL = 150Ω, Connected to VS/2, unless otherwise noted.
OPA356AIDBV, AID,
OPA2356AIDGK, AID
PARAMETER
CONDITION
MIN
THERMAL SHUTDOWN
Junction Temperature
Shutdown
Reset from Shutdown
TEMPERATURE RANGE
Specified Range
Operating Range
Storage Range
Thermal Resistance
SOT23-5, MSOP-8
SO-8
TYP
MAX
°C
°C
160
140
–40
–55
–65
125
150
150
θJA
150
125
UNITS
°C
°C
°C
°C/W
°C/W
°C/W
NOTES: (1) See typical characteristic “Output Voltage Swing vs Output Current”.
4
OPA356, 2356
SBOS212A
TYPICAL CHARACTERISTICS
At TA = +25°C and VS = 5V, G = +2, RF = 604Ω, RL = 150Ω connected to VS/2, unless otherwise noted.
NON-INVERTING SMALL-SIGNAL
FREQUENCY RESPONSE
INVERTING SMALL-SIGNAL
FREQUENCY RESPONSE
6
3
VO = 0.1Vp-p
0
Normalized Gain (dB)
3
Normalized Gain (dB)
VO = 0.1Vp-p
G = +1
RF = 0
0
–3
G = +2
–6
G = +5
–9
G = +10
1M
–3
G = –5
–6
G = –10
–9
10M
Frequency (Hz)
100M
–15
100k
1G
NON-INVERTING SMALL-SIGNAL
STEP RESPONSE
1M
10M
Frequency (Hz)
100M
1G
NON-INVERTING LARGE-SIGNAL
STEP RESPONSE
G = +2
Output Voltage (500mV/div)
Output Voltage (50mV/div)
G = +2
Time (20ns/div)
Time (20ns/div)
0.1dB GAIN FLATNESS FOR VARIOUS RF
HARMONIC DISTORTION vs OUTPUT VOLTAGE
–50
VO = 0.1Vp-p
CL = 0pF
0.4
RF = 604Ω
0.3
0.2
0.1
0
–0.1
RF = 560Ω
–0.2
–0.3
RF = 500Ω
–0.4
–0.5
Harmonic Distortion (dBc)
0.5
Normalized Gain (dB)
G = –2
–12
–12
–15
100k
G = –1
f = 1MHz
RL = 200Ω
–60
–70
2nd Harmonic
–80
3rd Harmonic
–90
–100
1
OPA356, 2356
SBOS212A
10
Frequency (MHz)
100
0
1
2
Output Voltage (Vp-p)
3
4
5
TYPICAL CHARACTERISTICS (Cont.)
At TA = +25°C and VS = 5V, G = +2, RF = 604Ω, RL = 150Ω connected to VS/2, unless otherwise noted.
HARMONIC DISTORTION vs NON-INVERTING GAIN
HARMONIC DISTORTION vs INVERTING GAIN
–50
VO = 2Vp-p
f = 1MHz
RL = 200Ω
–60
Harmonic Distortion (dBc)
Harmonic Distortion (dBc)
–50
–70
2nd Harmonic
–80
3rd Harmonic
–90
–100
VO = 2Vp-p
f = 1MHz
RL = 200Ω
–60
–70
2nd Harmonic
–80
3rd Harmonic
–90
–100
1
10
1
10
Gain (V/V)
Gain (V/V)
HARMONIC DISTORTION vs FREQUENCY
HARMONIC DISTORTION vs LOAD RESISTANCE
–50
VO = 2Vp-p
RL = 200Ω
–60
VO = 2Vp-p
f = 1MHz
Harmonic Distortion (dBc)
Harmonic Distortion (dBc)
–50
2nd Harmonic
–70
–80
3rd Harmonic
–90
–60
–70
–80
2nd Harmonic
–90
3rd Harmonic
–100
1M
Frequency (Hz)
100
1k
RL (Ω)
INPUT VOLTAGE AND CURRENT NOISE
SPECTRAL DENSITY vs FREQUENCY
FREQUENCY RESPONSE FOR VARIOUS RL
3
10k
RL = 10kΩ
0
1k
Voltage Noise
Current Noise
100
10
–3
CL = 0pF
VO = 0.1Vp-p
RL = 50Ω
–6
RL = 150Ω
–9
RL = 1kΩ
–12
1
10
100
1k
10k
100k
Frequency (Hz)
6
10M
Normalized Gain (dB)
Voltage Noise (nV/√Hz), Current Noise (fA/√Hz)
–100
100k
1M
10M
100M
–15
100k
1M
10M
Frequency (Hz)
100M
1G
OPA356, 2356
SBOS212A
TYPICAL CHARACTERISTICS (Cont.)
At TA = +25°C and VS = 5V, G = +2, RF = 604Ω, RL = 150Ω connected to VS/2, unless otherwise noted.
FREQUENCY RESPONSE FOR VARIOUS CL
RECOMMENDED RS vs CAPACITIVE LOAD
9
120
100
CL = 47pF
3
80
0
RS (Ω)
Normalized Gain (dB)
CL = 100pF
RS = 0Ω
VO = 0.1Vp-p
6
–3
CL = 5.6pF
60
VIN
VO
40
CL
1kΩ
604Ω
–9
20
–12
–15
100k
3
0
1M
10M
Frequency (Hz)
100M
1G
1
90
VIN
RS
VO
OPA356
CL
CL = 47pF
RS = 36Ω
1kΩ
604Ω
–12
(1kΩ is
Optional)
604Ω
–PSRR
80
CL = 5.6pF
RS = 80Ω
CMRR, PSRR (dB)
–3
–9
100
100
CL = 100pF
RS = 24Ω
–6
10
Capacitive Load (pF)
COMMON-MODE REJECTION RATIO AND
POWER-SUPPLY REJECTION RATIO vs FREQUENCY
G = +2
VO = 0.1Vp-p
0
(1kΩ is
Optional)
604Ω
FREQUENCY RESPONSE vs CAPACITIVE LOAD
Normalized Gain (dB)
RS
OPA356
–6
+PSRR
70
60
CMRR
50
40
30
20
10
–15
0
1M
10M
100M
Frequency (Hz)
1G
10k
1M
10M
Frequency (Hz)
100M
1G
COMPOSITE VIDEO
DIFFERENTIAL GAIN AND PHASE
OPEN-LOOP GAIN AND PHASE
0.40
180
160
0.35
RL = 1kΩ
140
120
dG/dP (%/degrees)
Open-Loop Phase (degrees)
Open-Loop Gain (dB)
100k
Phase
100
80
60
RL = 150Ω
40
Gain
0.30
0.25
0.20
dP
0.15
0.10
20
dG
0.05
0
0
–20
1k
10k
OPA356, 2356
SBOS212A
100k
1M
10M
Frequency (Hz)
100M
1G
1
2
3
Number of 150Ω Loads
4
7
TYPICAL CHARACTERISTICS (Cont.)
At TA = +25°C and VS = 5V, G = +2, RF = 604Ω, RL = 150Ω connected to VS/2, unless otherwise noted.
OUTPUT VOLTAGE SWING vs OUTPUT CURRENT
FOR VS = 3V
INPUT BIAS CURRENT vs TEMPERATURE
3
10n
–55°C
Output Voltage (V)
Input Bias Current (pA)
25°C
1n
100
2
125°C
Continuous currents above
60mA are not recommended
125°C
1
10
–55°C
25°C
0
1
–55
–35
–15
5
25
45
65
Temperature (°C)
85
0
105 125 135
30
60
90
Output Current (mA)
120
OUTPUT VOLTAGE SWING vs OUTPUT CURRENT
FOR VS = 5V
SUPPLY CURRENT vs TEMPERATURE
5
14
25°C
12
–55°C
4
VS = 5.5V
Output Voltage (V)
Supply Current (mA)
150
10
8
6
VS = 2.5V
VS = 3V
4
125°C
3
Continuous currents above
60mA are not recommended
2
125°C
VS = 5V
1
2
–55°C
25°C
0
0
–55
–35
–15
5
25
45
65
Temperature (°C)
85
0
105 125 135
CLOSED-LOOP OUTPUT IMPEDANCE vs FREQUENCY
50
100
150
Output Current (mA)
200
250
MAXIMUM OUTPUT VOLTAGE vs FREQUENCY
100
6
10
5
Output Voltage (Vp-p)
Output Impedance (Ω)
VS = 5.5V
1
OPA356
0.1
604Ω
ZO
0.01
3
VS = 2.7V
2
1
604Ω
0.001
0
10k
8
Maximum Output
Voltage without
Slew-Rate
Induced Distortion
4
100k
1M
10M
Frequency (Hz)
100M
1G
1
10
Frequency (MHz)
100
OPA356, 2356
SBOS212A
TYPICAL CHARACTERISTICS (Cont.)
At TA = +25°C and VS = 5V, G = +2, RF = 604Ω, RL = 150Ω connected to VS/2, unless otherwise noted.
OPEN-LOOP GAIN vs TEMPERATURE
OUTPUT SETTLING TIME TO 0.1%
110
0.2
VO = 2Vp-p
RL = 1kΩ
100
Open-Loop Gain (dB)
Output Error (%)
0.1
0
–0.1
–0.2
90
RL = 150Ω
80
70
–0.3
60
–0.4
0
5
10
15
20 25
30
Time (ns)
35
40
45
–55
50
–35
–15
25
45
65
Temperature (°C)
85
105 125 135
COMMON-MODE REJECTION RATIO AND
POWER-SUPPLY REJECTION RATIO vs TEMPERATURE
OFFSET VOLTAGE PRODUCTION DISTRIBUTION
100
20
18
Power-Supply Rejection Ratio
90
16
CMRR, PSRR (dB)
Percent of Amplifiers (%)
5
14
12
10
8
6
80
Common-Mode Rejection Ratio
70
60
4
2
50
0
–55
–9 –8 –7 –6 –5 –4 –3 –2 –1 0 1 2 3 4 5 6 7 8 9
Offset Voltage (mV)
–35
–15
5
25
45
65
Temperature (°C)
85
105 125 135
CHANNEL-TO-CHANNEL CROSSTALK
Crosstalk, Input-Referred (dB)
0
–20
–40
–60
–80
OPA2356
(dual)
–100
–120
100k
1M
10M
100M
Frequency (Hz)
OPA356, 2356
SBOS212A
9
APPLICATIONS INFORMATION
The OPAx356 series is a CMOS, high-speed, voltage feedback, operational amplifier designed for video and other
general-purpose applications. It is available as a single or
dual op amp.
The amplifier features a 200MHz gain bandwidth and
360V/µs slew rate, but it is unity-gain stable and can be
operated as a +1V/V voltage follower.
Its input common-mode voltage range includes ground, allowing the OPAx356 to be used in virtually any single-supply
application up to a supply voltage of +5.5V.
PCB LAYOUT
Good high-frequency PC board layout techniques should be
employed for the OPAx356. Generous use of ground planes,
short direct signal traces, and a suitable bypass capacitor
located at the V+ pin will assure clean, stable operation.
Large areas of copper also provide a means of dissipating
heat that is generated within the amplifier in normal operation.
Sockets are definitely not recommended for use with any
high-speed amplifier.
A 10µF ceramic bypass capacitor is the minimum recommended value; adding a 1µF or larger tantalum capacitor in
parallel can be beneficial when driving a low-resistance load.
Providing adequate bypass capacitance is essential to achieving very low harmonic and intermodulation distortion.
Parameters that vary significantly over supply voltage or
temperature are shown in the “Typical Characteristics” section of this data sheet.
OUTPUT DRIVE
The OPAx356 output stage is capable of driving a standard
back-terminated 75Ω video cable. By back-terminating a
transmission line, it does not exhibit a capacitive load to its
driver. A properly back-terminated 75Ω cable does not appear as capacitance; it presents only a 150Ω resistive load to
the OPAx356 output.
The output stage can supply high short-circuit current (typically over 200mA). Therefore, an on-chip thermal shutdown
circuit is provided to protect the OPAx356 from dangerously
high junction temperatures. At 160°C, the protection circuit
will shut down the amplifier. Normal operation will resume
when the junction temperature cools to below 140°C.
NOTE: It is not recommended to run a continuous DC current
in excess of ±60mA. Refer to the graph of “Output Voltage
Swing vs Output Current”, shown in the “Typical Characteristics” section of this data sheet.
INPUT AND ESD PROTECTION
All OPAx356 pins are static protected with internal ESD
protection diodes tied to the supplies, as shown in Figure 1.
These diodes will provide overdrive protection if the current
is externally limited to 10mA by the source or by a resistor.
OPERATING VOLTAGE
The OPAx356 is specified over a power-supply range of
+2.7V to +5.5V (±1.35 to ±2.75V). However, the supply
voltage may range from +2.5V to +5.5V (±1.25V to ±2.75V).
Supply voltages higher than 7.5V (absolute maximum) can
permanently damage the amplifier.
+V CC
External
Pin
Internal
Circuitry
–V CC
FIGURE 1. Internal ESD Protection.
10
OPA356, 2356
SBOS212A
PACKAGE DRAWINGS
MPDS018D – FEBRUARY 1996 – REVISED JANUARY 2001
DBV (R-PDSO-G5)
PLASTIC SMALL-OUTLINE
0,50
0,30
0,95
5
0,20 M
4
1,70
1,50
1
0,15 NOM
3,00
2,60
3
Gage Plane
3,00
2,80
0,25
0°–8°
0,55
0,35
Seating Plane
1,45
0,95
0,05 MIN
0,10
4073253-4/F 10/00
NOTES: A.
B.
C.
D.
All linear dimensions are in millimeters.
This drawing is subject to change without notice.
Body dimensions do not include mold flash or protrusion.
Falls within JEDEC MO-178
OPA356, 2356
SBOS212A
11
PACKAGE DRAWINGS (Cont.)
MPDS028B – JUNE 1997 – REVISED SEPTEMBER 2001
DGK (R-PDSO-G8)
PLASTIC SMALL-OUTLINE PACKAGE
0,38
0,25
0,65
8
0,08 M
5
0,15 NOM
3,05
2,95
4,98
4,78
Gage Plane
0,25
1
0°– 6°
4
3,05
2,95
0,69
0,41
Seating Plane
1,07 MAX
0,15
0,05
0,10
4073329/C 08/01
NOTES: A.
B.
C.
D.
12
All linear dimensions are in millimeters.
This drawing is subject to change without notice.
Body dimensions do not include mold flash or protrusion.
Falls within JEDEC MO-187
OPA356, 2356
SBOS212A
PACKAGE DRAWINGS (Cont.)
MSOI002B – JANUARY 1995 – REVISED SEPTEMBER 2001
D (R-PDSO-G**)
PLASTIC SMALL-OUTLINE PACKAGE
8 PINS SHOWN
0.020 (0,51)
0.014 (0,35)
0.050 (1,27)
8
0.010 (0,25)
5
0.008 (0,20) NOM
0.244 (6,20)
0.228 (5,80)
0.157 (4,00)
0.150 (3,81)
Gage Plane
1
4
0.010 (0,25)
0°– 8°
A
0.044 (1,12)
0.016 (0,40)
Seating Plane
0.010 (0,25)
0.004 (0,10)
0.069 (1,75) MAX
PINS **
0.004 (0,10)
8
14
16
A MAX
0.197
(5,00)
0.344
(8,75)
0.394
(10,00)
A MIN
0.189
(4,80)
0.337
(8,55)
0.386
(9,80)
DIM
4040047/E 09/01
NOTES: A.
B.
C.
D.
All linear dimensions are in inches (millimeters).
This drawing is subject to change without notice.
Body dimensions do not include mold flash or protrusion, not to exceed 0.006 (0,15).
Falls within JEDEC MS-012
OPA356, 2356
SBOS212A
13
PACKAGE OPTION ADDENDUM
www.ti.com
25-Apr-2022
PACKAGING INFORMATION
Orderable Device
Status
(1)
Package Type Package Pins Package
Drawing
Qty
Eco Plan
(2)
Lead finish/
Ball material
MSL Peak Temp
Op Temp (°C)
Device Marking
(3)
(4/5)
(6)
OPA2356AID
ACTIVE
SOIC
D
8
75
RoHS & Green
NIPDAU
Level-2-260C-1 YEAR
-40 to 125
OPA
2356A
OPA2356AIDG4
ACTIVE
SOIC
D
8
75
RoHS & Green
NIPDAU
Level-2-260C-1 YEAR
-40 to 125
OPA
2356A
OPA2356AIDGKR
ACTIVE
VSSOP
DGK
8
2500
RoHS & Green
Call TI | NIPDAUAG
Level-2-260C-1 YEAR
-40 to 125
AYI
OPA2356AIDGKT
ACTIVE
VSSOP
DGK
8
250
RoHS & Green
Call TI | NIPDAUAG
Level-2-260C-1 YEAR
-40 to 125
AYI
OPA2356AIDGKTG4
ACTIVE
VSSOP
DGK
8
250
RoHS & Green
Call TI
Level-2-260C-1 YEAR
-40 to 125
AYI
OPA2356AIDR
ACTIVE
SOIC
D
8
2500
RoHS & Green
NIPDAU
Level-2-260C-1 YEAR
-40 to 125
OPA
2356A
OPA356AID
ACTIVE
SOIC
D
8
75
RoHS & Green
NIPDAU
Level-2-260C-1 YEAR
-40 to 125
OPA
356A
OPA356AIDBVR
ACTIVE
SOT-23
DBV
5
3000
RoHS & Green
NIPDAU
Level-2-260C-1 YEAR
-40 to 125
OAAI
OPA356AIDBVT
ACTIVE
SOT-23
DBV
5
250
RoHS & Green
NIPDAU
Level-2-260C-1 YEAR
-40 to 125
OAAI
OPA356AIDBVTG4
ACTIVE
SOT-23
DBV
5
250
RoHS & Green
NIPDAU
Level-2-260C-1 YEAR
-40 to 125
OAAI
OPA356AIDG4
ACTIVE
SOIC
D
8
75
RoHS & Green
NIPDAU
Level-2-260C-1 YEAR
-40 to 125
OPA
356A
OPA356AIDR
ACTIVE
SOIC
D
8
2500
RoHS & Green
NIPDAU
Level-2-260C-1 YEAR
-40 to 125
OPA
356A
(1)
The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2)
RoHS: TI defines "RoHS" to mean semiconductor products that are compliant with the current EU RoHS requirements for all 10 RoHS substances, including the requirement that RoHS substance
do not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, "RoHS" products are suitable for use in specified lead-free processes. TI may
reference these types of products as "Pb-Free".
RoHS Exempt: TI defines "RoHS Exempt" to mean products that contain lead but are compliant with EU RoHS pursuant to a specific EU RoHS exemption.
Addendum-Page 1
Samples
PACKAGE OPTION ADDENDUM
www.ti.com
25-Apr-2022
Green: TI defines "Green" to mean the content of Chlorine (Cl) and Bromine (Br) based flame retardants meet JS709B low halogen requirements of
工商网监
湘ICP备2023018690号
