NE5534, NE5534A, SE5534, SE5534A
LOW-NOISE OPERATIONAL AMPLIFIERS
SLOS070 – JULY 1979 – REVISED SEPTEMBER 1990
D
D
D
D
D
D
BALANCE
IN –
IN +
VCC –
8
2
7
3
6
4
5
COMP/BAL
VCC +
OUT
COMP
SE5534, SE5534A . . . FK PACKAGE
(TOP VIEW)
NC
IN –
NC
IN +
NC
description
4
3 2 1 20 19
18
5
17
6
16
7
15
8
14
9 10 11 12 13
NC
VCC –
The NE5534, NE5534A, SE5534, and SE5534A
are monolithic high-performance operational
amplifiers combining excellent dc and ac
characteristics. Some of the features include very
low noise, high output drive capability, high unitygain and maximum-output-swing bandwidths, low
distortion, and high slew rate.
These operational amplifiers are internally
compensated for a gain equal to or greater than
three. Optimization of the frequency response for
various applications can be obtained by use of an
external compensation capacitor between COMP
and COMP/BAL. The devices feature inputprotection diodes, output short-circuit protection,
and offset-voltage nulling capability.
1
NC
VCC +
NC
OUT
NC
NC
COMP
NC
D
D
NE5534, NE5534A . . . D OR P PACKAGE
SE5534, SE5534A . . . JG PACKAGE
(TOP VIEW)
Equivalent Input Noise Voltage
3.5 nV/√Hz
Unity-Gain Bandwidth . . . 10 MHz Typ
Common-Mode Rejection Ratio
100 dB Typ
High DC Voltage Gain . . . 100 V/mV Typ
Peak-to-Peak Output Voltage Swing
32 V Typ With VCC± = ±18 V and RL = 600 Ω
High Slew Rate . . . 13 V/µs Typ
Wide Supply Voltage Range ± 3 V to ± 20 V
Low Harmonic Distortion
Designed to Be Interchangeable With
Signetics NE5534, NE5534A, SE5534,
and SE5534A
NC
BALANCE
NC
COMP/BAL
NC
D
NC – No internal connection
symbol
COMP
COMP/BAL
IN –
–
IN +
+
OUT
For the NE5534A, a maximum limit is specified for
equivalent input noise voltage.
BALANCE
The NE5534 and NE5534A are characterized for
operation from 0°C to 70°C. The SE5534 and
SE5534A are characterized for operation over the
full military temperature range of – 55°C to 125°C.
SE5534A FROM TI NOT RECOMMENDED
FOR NEW DESIGNS
AVAILABLE OPTIONS
TA
VIO max
AT 25
C
25°C
0°C to 70°C
– 55°C to 125°C
PACKAGE
SMALL OUTLINE
(D)
CERAMIC
(FK)
CERAMIC DIP
(JG)
PLASTIC DIP
(P)
4 mV
NE5534D
NE5534AD
—
—
—
—
NE5534P
NE5534AP
2 mV
—
—
SE5534FK
SE5534AFK
SE5534JG
SE5534AJG
—
—
The D package is available taped and reeled. Add the suffix R to the device type (e.g., NE5534DR).
Copyright 1990, Texas Instruments Incorporated
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
1
NE5534, NE5534A, SE5534, SE5534A
LOW-NOISE OPERATIONAL AMPLIFIERS
SLOS070 – JULY 1979 – REVISED SEPTEMBER 1990
schematic
BALANCE
COMP/BAL
8
1
COMP
5
7
VCC +
100 pF
IN +
12 kΩ
12 kΩ
3
40 pF
15 Ω
6
IN –
2
12 pF
7 pF
OUT
15 Ω
4
VCC –
All component values shown are nominal.
Pin numbers shown are for D, JG, and P packages.
absolute maximum ratings over operating free-air temperature range (unless otherwise noted)
Supply voltage, VCC + (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 V
Supply voltage, VCC – (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 22 V
Input voltage either input (see Notes 1 and 2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . VCC+
Input current (see Note 3) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±10 mA
Duration of output short circuit (see Note 4) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . unlimited
Continuous total power dissipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . See Dissipation Rating Table
Operating free-air temperature range: NE5534, NE5534A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0°C to 70°C
SE5534, SE5534A . . . . . . . . . . . . . . . . . . . . . . . . . . – 55°C to 125°C
Storage temperature range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 65°C to 150°C
Case temperature for 60 seconds: FK package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 260°C
Lead temperature range 1,6 mm (1/16 inch) from case for 60 seconds: JG package . . . . . . . . . . . . . . 300°C
Lead temperature range 1,6 mm (1/16 inch) from case for 10 seconds: D or P package . . . . . . . . . . . 260°C
NOTES: 1. All voltage values, except differential voltages, are with respect to the midpoint between VCC + and VCC – .
2. The magnitude of the input voltage must never exceed the magnitude of the supply voltage.
3. Excessive current will flow if a differential input voltage in excess of approximately 0.6 V is applied between the inputs unless some
limiting resistance is used.
4. The output may be shorted to ground or to either power supply. Temperature and/or supply voltages must be limited to ensure the
maximum dissipation rating is not exceeded.
2
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
NE5534, NE5534A, SE5534, SE5534A
LOW-NOISE OPERATIONAL AMPLIFIERS
SLOS070 – JULY 1979 – REVISED SEPTEMBER 1990
DISSIPATION RATING TABLE
PACKAGE
TA ≤ 25°C
POWER RATING
DERATING FACTOR
ABOVE TA = 25°C
TA = 70°C
POWER RATING
TA = 125°C
POWER RATING
D
FK (see Note 5)
JG
P
725 mW
1375 mW
1050 mW
1000 mW
5.8 mW/°C
11.0 mW/°C
8.4 mW/°C
8.0 mW/°C
464 mW
880 mW
672 mW
640 mW
N/A
275 mW
210 mW
N/A
NOTE 5: For the FK package, power rating and derating factor will vary with actual mounting technique used. The
values stated here are believed to be conservative.
recommended operating conditions
MIN
NOM
MAX
UNIT
Supply voltage, VCC +
5
15
V
Supply voltage, VCC –
–5
– 15
V
electrical characteristics, VCC ± = ±15 V, TA = 25°C (unless otherwise noted)
TEST CONDITIONS†
PARAMETER
NE5534, NE5534A
SE5534, SE5534A
MIN
MIN
TYP
MAX
4
VIO
Input offset voltage
VO = 0,,
RS = 50 Ω
TA = 25°C
TA = Full range
0.5
IIO
Input offset current
VO = 0
TA = 25°C
TA = Full range
20
IIB
Input bias current
VO = 0
TA = 25°C
TA = Full range
500
VICR
Common-mode input
voltage range
VO(PP)
Maximum peak-to-peak
output voltage swing
RL ≥ 600 Ω
AVD
Large-signal
g
g
differential
voltage amplification
VO = ±10 V,,
RL ≥ 600 Ω
Avd
d
Small-signal
g
differential
voltage amplification
f = 10 kHz
BOM
B1
ri
Maximum-output-swing
bandwidth
Unity-gain bandwidth
0.5
2
5
3
300
10
400
1500
400
2000
±13
VCC± = ±15 V
VCC± = ±18 V
24
26
24
26
30
32
30
32
TA = 25°C
TA = Full range
25
100
50
100
CC = 0
800
1500
±12
15
200
500
±13
UNIT
mV
nA
nA
V
V
V/mV
25
6
6
CC = 22 pF
2.2
2.2
VO = ±10 V,
VO = ±10 V,
CC = 0
200
200
CC = 22 pF
95
95
VCC ± = ± 18 V,
RL ≥ 600 Ω,
VO = ±14 V,
CC = 22 pF
70
70
CC = 22 pF,
CL = 100 pF
10
10
MHz
100
kΩ
RL ≥ 600 Ω,
f = 10 kHz
0.3
Ω
VIC= VICRmin,
70
100
80
100
dB
80
100
86
100
dB
Input resistance
30
zo
Output impedance
CMRR
Common-mode rejection
ratio
VO = 0,
RS = 50 Ω
kSVR
Supply voltage rejection
ratio (∆VCC/∆VIO)
VCC+ = ± 9 V to ±15 V,
VO = 0,
RS = 50 Ω
IOS
Output short-circuit current
VO = 0,
No load
TA = 25°C
TA = Full range
Supply current
MAX
±12
AVD = 30 dB,
CC = 22 pF,
ICC
TYP
100
50
0.3
38
4
V/mV
kHz
38
8
4
mA
6.5
9
mA
† All characteristics are measured under open-loop conditions with zero common-mode input voltage unless otherwise specified. Full range is
TA = 0°C to 70°C for NE5534 and NE5534A and – 55°C to 125°C for SE5534 and SE5534A.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
3
NE5534, NE5534A, SE5534, SE5534A
LOW-NOISE OPERATIONAL AMPLIFIERS
SLOS070 – JULY 1979 – REVISED SEPTEMBER 1990
operating characteristics, VCC ± = ±15 V, TA = 25°C
PARAMETER
SR
Slew rate at unity gain
tr
Rise time
Overshoot factor
tr
SE5534, NE5534
TEST CONDITIONS
Rise time
Overshoot factor
Vn
Equivalent input noise voltage
In
Equivalent input noise current
F
Average noise figure
MIN
TYP
CC = 0
AVD = 1,
CC = 22 pF
F,
VI = 50 mV,
RL = 600 Ω,
Ω
CL = 500 pF
f = 30 Hz
AVD = 1,
CC = 47 pF
F,
MIN
TYP
13
13
6
6
20
20
20%
20%
50
50
35%
35%
CC = 22 pF
VI = 50 mV,
RL = 600 Ω,
Ω
CL = 100 pF
SE5534A, NE5534A
MAX
V/µs
ns
ns
7
5.5
7
f = 1 kHz
4
3.5
4.5
f = 30 Hz
2.5
1.5
f = 1 kHz
0.6
0.4
RS = 5 kΩ,
f = 10 Hz to 20 kHz
UNIT
MAX
nV/√Hz
pA/√Hz
0.9
dB
NORMALIZED INPUT BIAS CURRENT
AND INPUT OFFSET CURRENT
vs
FREE-AIR TEMPERATURE
1.6
VCC ± = ± 15 V
1.4
Offset
1.2
Bias
1
0.8
0.6
0.4
– 75
– 50 – 25
0
25
50
75
100
TA – Free-Air Temperature – °C
125
VO(PP)
VOPP – Maximum Peak-to-Peak Output Voltage – V
Nornalized Input Bias Current and Input Offset Current
TYPICAL CHARACTERISTICS†
ÁÁ
ÁÁ
ÁÁ
MAXIMUM PEAK-TO-PEAK OUTPUT VOLTAGE
vs
FREQUENCY
30
CC = 0
25
20
15
10
CC = 22 pF
5
VCC ± = ± 15 V
TA = 25°C
0
100
Figure 1
1k
CC = 47 pF
10 k
100 k
f – Frequency – Hz
Figure 2
† Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices.
4
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
1M
NE5534, NE5534A, SE5534, SE5534A
LOW-NOISE OPERATIONAL AMPLIFIERS
SLOS070 – JULY 1979 – REVISED SEPTEMBER 1990
TYPICAL CHARACTERISTICS†
NORMALIZED SLEW RATE AND
UNITY-GAIN BANDWIDTH
vs
SUPPLY VOLTAGE
106
1.2
Normalized Slew Rate and Unity-Gain Bandwidth
AVD – Differential Voltage Amplification – V/mV
LARGE-SIGNAL
DIFFERENTIAL VOLTAGE AMPLIFICATION
vs
FREQUENCY
VCC ± = ± 15 V
TA = 25°C
105
104
103
CC = 0 pF
102
CC = 22 pF
10
1
10
100
1k
10 k 100 k 1 M
f – Frequency – Hz
TA = 25°C
1.1
Unity-Gain
Bandwidth
1
0.9
0.8
0.7
Slew Rate
0.6
0.5
0.4
0
10 M 100 M
5
10
15
| VCC ± | – Supply Voltage – V
Figure 4
Figure 3
NORMALIZED SLEW RATE AND
UNITY-GAIN BANDWIDTH
vs
FREE-AIR TEMPERATURE
TOTAL HARMONIC DISTORTION
vs
FREQUENCY
0.01
VCC ± = ± 15 V
THD – Total Harmonic Distortion – %
Normalized Slew Rate and Unity-Gain Bandwidth
1.2
1.1
20
Slew Rate
Unity-Gain
Bandwidth
1
0.9
0.8
– 75 – 50 – 25
0
25
50
75 100
TA – Free-Air Temperature – °C
125
0.007
VCC ± = ± 15 V
AVD = 1
VI(rms) = 2 V
TA = 25°C
0.004
0.002
0.001
100
400
1k
4k
10 k
40 k 100 k
f – Frequency – Hz
Figure 5
Figure 6
† Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
5
NE5534, NE5534A, SE5534, SE5534A
LOW-NOISE OPERATIONAL AMPLIFIERS
SLOS070 – JULY 1979 – REVISED SEPTEMBER 1990
TYPICAL CHARACTERISTICS
EQUIVALENT INPUT NOISE VOLTAGE
vs
FREQUENCY
10
VCC ± = ± 15 V
TA = 25°C
7
I n – Equivalent Input Noise Current – pA/ Hz
Vn – Equivalent Input Noise Voltage – nV/ Hz
10
EQUIVALENT INPUT NOISE CURRENT
vs
FREQUENCY
SE5534, NE5534
4
SE5534A, NE5534A
2
1
10
100
1k
10 k
4
2
1
SE5534, NE5534
0.7
0.4
SE5534A, NE5534A
0.2
0.1
10
100 k
VCC ± = ± 15 V
TA = 25°C
7
100
f – Frequency – Hz
1k
f – Frequency – Hz
Figure 8
Figure 7
TOTAL EQUIVALENT INPUT NOISE VOLTAGE
vs
SOURCE RESISTANCE
Total Equivalent Input Noise Voltage – µV
100
70
40
VCC ± = ± 15 V
TA = 25°C
20
10
7
4
f = 10 Hz to 20 kHz
2
1
0.7
0.4
f = 200 Hz to 4 kHz
0.2
0.1
100
1k
10 k
100 k
RS – Source Resistance – Ω
Figure 9
6
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
1M
10 k
100 k
IMPORTANT NOTICE
Texas Instruments and its subsidiaries (TI) reserve the right to make changes to their products or to discontinue
any product or service without notice, and advise customers to obtain the latest version of relevant information
to verify, before placing orders, that information being relied on is current and complete. All products are sold
subject to the terms and conditions of sale supplied at the time of order acknowledgement, including those
pertaining to warranty, patent infringement, and limitation of liability.
TI warrants performance of its semiconductor products to the specifications applicable at the time of sale in
accordance with TI’s standard warranty. Testing and other quality control techniques are utilized to the extent
TI deems necessary to support this warranty. Specific testing of all parameters of each device is not necessarily
performed, except those mandated by government requirements.
CERTAIN APPLICATIONS USING SEMICONDUCTOR PRODUCTS MAY INVOLVE POTENTIAL RISKS OF
DEATH, PERSONAL INJURY, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE (“CRITICAL
APPLICATIONS”). TI SEMICONDUCTOR PRODUCTS ARE NOT DESIGNED, AUTHORIZED, OR
WARRANTED TO BE SUITABLE FOR USE IN LIFE-SUPPORT DEVICES OR SYSTEMS OR OTHER
CRITICAL APPLICATIONS. INCLUSION OF TI PRODUCTS IN SUCH APPLICATIONS IS UNDERSTOOD TO
BE FULLY AT THE CUSTOMER’S RISK.
In order to minimize risks associated with the customer’s applications, adequate design and operating
safeguards must be provided by the customer to minimize inherent or procedural hazards.
TI assumes no liability for applications assistance or customer product design. TI does not warrant or represent
that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other
intellectual property right of TI covering or relating to any combination, machine, or process in which such
semiconductor products or services might be or are used. TI’s publication of information regarding any third
party’s products or services does not constitute TI’s approval, warranty or endorsement thereof.
Copyright 1998, Texas Instruments Incorporated
1 of 3
Products
Development Tools
Applications
Search
PRODUCT FOLDER | PRODUCT INFO: FEATURES | DESCRIPTION | DATASHEETS |
PRICING/AVAILABILITY | APPLICATION NOTES |
USER MANUALS
PRODUCT SUPPORT: DEVELOPMENT TOOLS | APPLICATIONS
SE5534, Low-Noise Operational
DEVICE STATUS: ACTIVE
Back to Top
FEATURES
l
l
l
l
l
Equivalent Input Noise Voltage
3.5 nV/ (Hz )\
Unity-Gain Bandwidth...10 MHz Typ
Common -Mode Rejection Ratio
100 dB Typ
High DC Voltage Gain...100 V/mV Typ
Peak-to-Peak Output Voltage Swing
32 V Typ With V
= ±18 V and R = 600
CC±
l
l
l
l
L
High Slew Rate...13 V/us Typ
Wide Supply Voltage Range ±3 V to ±20 V
Low Harmonic Distortion
Designed to Be Interchangeable With Signetics NE5534, NE5534A, SE5534,
and SE5534A
DESCRIPTION
Back to Top
The NE5534, NE5534A, SE5534, and SE5534A are monolithic high-performance operational
amplifiers combining excellent dc and ac characteristics. Some of the features include very low
noise, high output drive capability, high unitygain and maximum-output-swing bandwidths, low distortion, and high slew rate.
These operational amplifiers are internally compensated for a gain equal to or greater than
three. Optimization of the frequency response for various applications can be obtained by use
of an external compensation capacitor between COMP and COMP/BAL. The devices feature
inputprotection diodes, output short-circuit protection, and offset-voltage nulling capability.
For the NE5534A, a maximum limit is specified for equivalent input noise voltage.
The NE5534 and NE5534A are characterized for operation from 0°C to 70°C. The SE5534 and
2 of 3
SE5534A are characterized for operation over the full military temperature range of - 55°C to
125°C.
The D package is available taped and reeled. Add the suffix R to the device type (e.g., NE5534DR).
Back to Top
TECHNICAL DOCUMENTS
To view the following documents, Acrobat Reader 3.x is required.
To download a document to your hard drive, right-click on the link and choose 'Save'.
Back to Top
DATASHEET
Full datasheet in Acrobat PDF: slos070.pdf (119 KB) ( Updated: 09/01/1990)
Full datasheet in Zipped PostScript: slos070.psz (109 KB)
Back to Top
APPLICATION NOTES
View Application Reports for Signal Amplifiers (Less than equal to 100MHz)
l
l
l
Analog Applications Journal May 2000 (SLYT015 - Updated: 04/20/2000)
Analog Applications Journal, September 1999 edition (SLYT005 - Updated: 07/15/1999)
Analysis Of The Sallen-Key Architecture (SLOA024A - Updated: 07/27/1999)
Back to Top
USER MANUALS
l
l
l
l
l
Universal Op Amp Single, Dual, Quad (SOIC) Evaluation Module With
Shutdown (SLOU061, 1160 KB - Updated: 10/22/1999)
Universal Operational Amplifier EVM (SLVU006A, 387 KB - Updated: 03/22/1999)
Universal Operational Amplifier Evaluation Module Selection Guide (SLOU060A, 16 KB Updated: 09/28/2000)
Universal Operational Amplifier Single, Dual, Quad (MSOP/TSSOP) (SLOU055, 1196 KB Updated: 10/22/1999)
Universal Operational Amplifier Single, Dual, Quad (PDIP) (SLOU062, 1211 KB - Updated:
10/22/1999)
Back to Top
PRICING/AVAILABILITY
ORDERABLE
DEVICE
PACKAGE PINS
TEMP
(ºC)
STATUS
BUDGETARY
PRICE
US$/UNIT
QTY=1000+
PACK
QTY
DSCC
NUMBER
PRICING/AVAILABILITY
SE5534FKB
FK
20
-55 TO
125
ACTIVE
11.15
1
Check stock or order
SE5534JG
JG
8
-55 TO
125
ACTIVE
4.22
1
Check stock or order
SE5534JGB
JG
8
-55 TO
125
ACTIVE
4.95
1
Check stock or order
DEVELOPMENT TOOLS
Back to Top
Tool Part
Number
Tool Title
Tool Type
UNIV-OPAMP1B
Universal EVM for Single/Dual OpAmps without Shutdown in
MSOP/SOIC/SOT-23 packages
Evaluation Modules
(EVM)
UNIV-OPAMP-
Universal EVM for Single/Dual OpAmps with Shutdown in
Evaluation Modules
3 of 3
2B
MSOP/SOIC/SOT-23 packages
(EVM)
UNIV-OPAMP3B
Universal EVM for Single/Dual/Quad OpAmps with/without Shutdown in
MSOP/TSSOP packages
Evaluation Modules
(EVM)
UNIV-OPAMP4B
Universal EVM for Single/Dual/Quad OpAmps with/without Shutdown in
SOIC packages
Evaluation Modules
(EVM)
UNIV-OPAMP5B
Universal EVM for Single/Dual/Quad OpAmps with/without Shutdown in
PDIP packages
Evaluation Modules
(EVM)
Table Data Updated on: 11/12/2000
© Copyright 2000 Texas Instruments Incorporated. All rights reserved. Trademarks | Privacy Policy
| Important Notice
工商网监
湘ICP备2023018690号
