SN64BCT757N

SN64BCT757 OCTAL BUFFER/DRIVER WITH OPEN-COLLECTOR OUTPUTS SCBS479 – MARCH 1993 – REVISED MAY 1994 • • • • • DW OR N PACKAGE (TOP VIEW) BiCMOS Design Significantly Reduces ICCZ ESD Protection Exceeds 2000 V Per MIL-STD-883C, Method 3015; Exceeds 200 V Using Machine Model (C = 200 pF, R = 0) High-Impedance State During Power Up and Power Down Open-Collector Outputs Drive Bus Lines or Buffer-Memory Address Registers Package Options Include Plastic Small-Outline (DW) Packages and Standard Plastic and Ceramic 300-mil DIPs (N) 1OE 1A1 2Y4 1A2 2Y3 1A3 2Y2 1A4 2Y1 GND 1 20 2 19 3 18 4 17 5 16 6 15 7 14 8 13 9 12 10 11 VCC 2OE 1Y1 2A4 1Y2 2A3 1Y3 2A2 1Y4 2A1 description This octal buffer and line driver is designed specifically to improve both the performance and density of 3-state memory address drivers, clock drivers, and bus-oriented receivers and transmitters. The device provides complementary output-enable (OE and OE) inputs and noninverting outputs. The SN64BCT757 is characterized for operation from – 40°C to 85°C and 0°C to 70°C. FUNCTION TABLES INPUTS 1OE 1A OUTPUT 1Y H X H L L L L H H INPUTS 2OE 2A OUTPUT 2Y L X H H L L H H H Copyright  1994, Texas Instruments Incorporated PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 3–1 SN64BCT757 OCTAL BUFFER/DRIVER WITH OPEN-COLLECTOR OUTPUTS SCBS479 – MARCH 1993 – REVISED MAY 1994 logic symbol† 1OE 1A1 1A2 1A3 1A4 1 logic diagram (positive logic) 1OE EN 2 18 4 16 6 14 12 8 1Y1 1A1 2A1 2A2 2A3 2A4 19 2 18 4 16 1Y2 1Y3 1A2 1Y1 1Y2 1Y4 1A3 2OE 1 6 14 1Y3 EN 11 9 13 7 15 5 17 3 1A4 8 12 1Y4 2Y1 2Y2 2Y3 2OE 19 2Y4 † This symbol is in accordance with ANSI/IEEE Std 91-1984 and IEC Publication 617-12. 2A1 2A2 2A3 2A4 11 9 13 7 15 5 17 3 2Y1 2Y2 2Y3 2Y4 absolute maximum ratings over operating free-air temperature range (unless otherwise noted)‡ Supply voltage range, VCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 0.5 V to 7 V Input voltage range, VI (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 0.5 V to 7 V Voltage range applied to any output in the disabled or power-off state, VO . . . . . . . . . . . . . . . . – 0.5 V to 5.5 V Voltage range applied to any output in the high state, VO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 0.5 V to VCC Input clamp current, IIK (VI < 0) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 30 mA Current into any output in the low state, IO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128 mA Operating free-air temperature range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 40°C to 85°C Storage temperature range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 65°C to 150°C ‡ Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. NOTE 1: The input negative-voltage ratings may be exceeded if the input clamp-current ratings are observed. 3–2 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 SN64BCT757 OCTAL BUFFER/DRIVER WITH OPEN-COLLECTOR OUTPUTS SCBS479 – MARCH 1993 – REVISED MAY 1994 recommended operating conditions (see Note 2) MIN NOM MAX 4.5 5 5.5 UNIT VCC VIH Supply voltage VIL VOH Low-level input voltage High-level output voltage 5.5 V IIK IOL Input clamp current –18 mA 64 mA ∆t/∆VCC TA Power-up ramp rate High-level input voltage 2 V 0.8 Low-level output current V µs / V 2 Operating free-air temperature V – 40 85 °C NOTE 2: Unused or floating inputs must be held high or low. electrical characteristics over recommended operating free-air temperature range (unless otherwise noted) PARAMETER TEST CONDITIONS VIK IOH VCC = 4.5 V, VCC = 4.5 V, II = –18 mA VOH = 5.5 V VOL IOZ VCC = 4.5 V, VCC = 0 to 2.3 V (power up), IOL = 64 mA VO = 2.7 V, IOZ II VCC = 1.8 V to 0 (power down), VCC = 5.5 V, VO = 2.7 V, VI = 7 V IIH IIL VCC = 5.5 V, VCC = 5.5 V, VI = 2.7 V VI = 0.5 V MIN TYP† 0.42 ICC VCC = 5.5 V, Outputs open Ci VCC = 5 V, VCC = 5 V, VI = 2.5 V or 0.5 V VO = 2.5 V or 0.5 V MAX V 0.1 mA 0.55 V OE = 0.8 V or OE = 2 V 50 µA OE = 0.8 V or OE = 2 V 50 µA 0.1 mA 20 µA –1 mA Outputs high 34 Outputs low 77 OE and OE inactive Co † All typical values are at VCC = 5 V, TA = 25°C. UNIT –1.2 mA 10 6 pF 4 pF switching characteristics over recommended range of supply voltage, CL = 50 pF (unless otherwise noted) (see Note 3) FROM (INPUT) TO (OUTPUT) tPLH tPHL A Y tPLH tPHL 2OE Y tPLH tPHL 1OE Y PARAMETER VCC = 5 V, TA = 25°C TA = – 40°C to 85°C TA = 0°C to 70°C UNIT MIN TYP MAX MIN MAX MIN MAX 6.9 8.3 9.6 6.5 11.2 6.6 10.1 2.4 4.2 6 1.9 7 2 6.6 11 14.8 17.9 10.4 21.3 10.8 19.7 2.9 4.6 6.2 2.6 7.5 2.6 6.9 11.4 13.9 16.1 8.9 19.9 10 18 4.4 6.1 7.8 4 9.2 4 8.5 ns ns ns NOTE 3: Load circuits and voltage waveforms are shown in Section 1. POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 3–3 PACKAGE OPTION ADDENDUM www.ti.com 14-Oct-2022 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Pins Package Drawing Qty Eco Plan (2) Lead finish/ Ball material MSL Peak Temp Op Temp (°C) Device Marking (3) Samples (4/5) (6) SN64BCT757DW ACTIVE SOIC DW 20 25 RoHS & Green NIPDAU Level-1-260C-UNLIM -40 to 85 6BCT757 Samples SN64BCT757DWR ACTIVE SOIC DW 20 2000 RoHS & Green NIPDAU Level-1-260C-UNLIM -40 to 85 6BCT757 Samples (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) RoHS: TI defines "RoHS" to mean semiconductor products that are compliant with the current EU RoHS requirements for all 10 RoHS substances, including the requirement that RoHS substance do not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, "RoHS" products are suitable for use in specified lead-free processes. TI may reference these types of products as "Pb-Free". RoHS Exempt: TI defines "RoHS Exempt" to mean products that contain lead but are compliant with EU RoHS pursuant to a specific EU RoHS exemption. Green: TI defines "Green" to mean the content of Chlorine (Cl) and Bromine (Br) based flame retardants meet JS709B low halogen requirements of