SN74AHC04N

SN74AHC04 SN54AHC04 www.ti.com SCLS231N – OCTOBER 1995 – REVISED MAY 2013 HEX INVERTERS Check for Samples: SN74AHC04, SN54AHC04 FEATURES 1 Operating Range 2-V to 5.5-V Latch-Up Performance Exceeds 250 mA Per JESD 17 SN54AHC04 . . . JORWP ACKAGE SN74AHC04 . . . D,DB,DGV,N,NS, OR PW PACKAGE (TOP VIEW) 13 3 12 4 11 5 10 6 9 7 8 1Y 2A 2Y 3A 3Y 1 14 1Y 1A NC VCC 6A VCC VCC 6A 6Y 5A 5Y 4A 4Y SN54AHC04 . . . FK PACKAGE (TOP VIEW) 2 13 6A 3 12 6Y 4 5A 10 5Y 9 4A 2A NC 2Y NC 3A 11 5 6 7 8 4 3 2 1 20 19 18 5 17 6 16 7 15 8 14 9 10 11 12 13 6Y NC 5A NC 5Y 3Y GND NC 4Y 4A 2 14 SN74AHC04 . . . RGY PACKAGE (TOP VIEW) 4Y 1 ESD Protection Exceeds JESD 22 – 2000-V Human-Body Model (A114-A) – 200-V Machine Model (A115-A) – 1000-V Charged-Device Model (C101) 1A 1A 1Y 2A 2Y 3A 3Y GND • GND • • NC − No internal connection DESCRIPTION The ’AHC04 devices contain six independent inverters. These devices perform the Boolean function Y = A. FUNCTION TABLE INPUT OUTPUT A Y H L L H LOGIC DIAGRAM, EACH GATE (POSITIVE LOGIC) A Y 1 Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of the Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. Copyright © 1995–2013, Texas Instruments Incorporated SN74AHC04 SN54AHC04 SCLS231N – OCTOBER 1995 – REVISED MAY 2013 www.ti.com ABSOLUTE MAXIMUM RATINGS over operating free-air temperature range (unless otherwise noted) (1) VALUE UNIT Supply voltage range, VCC –0.5 to 7 V Input voltage range, VI (2) –0.5 to 7 V Output voltage range, VO (2) –0.5 to VCC + 0.5 V Input clamp current, IIK (VI < 0) –20 mA Output clamp current, IOK (VO < 0 or VO > VCC) ±20 mA Continuous output current, IO (VO = 0 to VCC) ±25 mA Continuous current through VCC or GND ±50 mA D package Package thermal impedance, θJA (3) 86 DB package (3) 96 DGV package (3) 127 N package (3) 80 NS package (3) 76 PW package (3) 113 RGY package (4) 47 Storage temperature range, Tstg (1) (2) (3) (4) °C/W –65 to 150 °C Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. The input and output voltage ratings may be exceeded if the input and output current ratings are observed. The package thermal impedance is calculated in accordance with JESD 51-7. The package thermal impedance is calculated in accordance with JESD 51-5 RECOMMENDED OPERATING CONDITIONS (1) SN54AHC04 VCC Supply voltage VIH High-level input voltage SN74AHC04 MIN MAX 2 5.5 MIN MAX 2 5.5 VCC= 2 V 1.5 1.5 VCC= 3V 2.1 2.1 VCC= 5.5 V 3.85 UNIT V V 3.85 VCC= 2 V 0.5 0.5 VCC= 3 V 0.9 0.9 VIL Low-level Input voltage VI Input voltage 0 5.5 0 5.5 V VO Output voltage 0 VCC 0 VCC V VCC= 5.5 V 1.65 VCC= 2 V IOH High-level output current IOL Low-level output current Δt/Δv Input Transition rise or fall rate TA Operating free-air temperature (1) 2 1.65 –50 –50 VCC= 3.3 V ± 0.3 V –4 –4 VCC= 5 V ± 0.5 V –8 –8 VCC= 2 V 50 50 VCC= 3.3 V ± 0.3 V 4 4 VCC= 5 V ± 0.5 V 8 8 100 100 20 20 VCC= 3.3 V ± 0.3 V VCC= 5 V ± 0.5 V –55 125 V –40 125 mA mA ns/V °C All unused inputs of the device must be held at VCC or GND to ensure proper device operation. Refer to the TI application report, Implications of Slow or Floating CMOS Inputs, literature number SCBA004. Submit Documentation Feedback Copyright © 1995–2013, Texas Instruments Incorporated Product Folder Links: SN74AHC04 SN54AHC04 SN74AHC04 SN54AHC04 www.ti.com SCLS231N – OCTOBER 1995 – REVISED MAY 2013 ELECTRICAL CHARACTERISTICS over operating free-air temperature range (unless otherwise noted) PARAMETER TEST CONDITIONS SN74AHC04 MAX MIN MAX MIN Recommended MIN TYP 2V 1.9 2 1.9 1.9 1.9 MAX MIN 2.9 2.9 3 2.9 2.9 4.4 4.5 4.4 4.4 4.4 IOH = –4 mA 3V 2.58 2.48 2.48 2.48 IOH = –8 mA 4.5 V 3.94 VOL ICC VI = VCC or GND, Ci VI = VCC or GND IO = 0 V 3.8 0.1 0.1 0.1 0.1 3V 0.1 0.1 0.1 0.1 4.5 V 0.1 0.1 0.1 0.1 3V 0.36 0.5 0.44 0.5 4.5 V 0.36 0.5 0.44 0.5 ±0.1 (1) ±1 ±1 µA 20 20 20 µA 0 V to 5.5 V VI = 5.5 V or GND 3.8 MAX 2V IOH = 4 mA IOH = 8 mA 3.8 UNIT SN74AHC04 3V IOL = 50 µA (1) SN54AHC04 TA = –40°C TO 125°C 4.5 V VOH II TA = –40°C TO 85°C TA = 25°C VCC IOH = –50 µA TA = –55°C TO 125°C 5.5 V ±1 2 5V 2 10 10 V pF On products compliant to MIL-PRF-38535, this parameter is not production tested at VCC = 0 V. SWITCHING CHARACTERISTICS over recommended operating free-air temperature range, VCC = 3.3 V ± 0.3 V (unless otherwise noted) (see Figure 1) PARAMETER tPLH tPHL tPLH tPHL (1) FROM (INPUT) TO (OUTPUT) LOAD CAPACITANCE A Y CL = 15 pF A Y CL = 50 pF TA = 25°C TA = –40°C TO 125°C TA = –55°C TO 125°C TA = –40°C TO 85°C SN54AHC04 SN74AHC04 SN74AHC04 MIN MIN MIN MAX MAX Recommended TYP MAX 5 (1) 8.9 (1) 1 (1) 10.5 (1) 1 10.5 1 10.5 5 (1) 8.9 (1) 1 (1) 10.5 (1) 1 10.5 1 10.5 7.5 11.4 1 13 1 13 1 13 7.5 11.4 1 13 1 13 1 13 UNIT MAX ns ns On products compliant to MIL-PRF-38535, this parameter is not production tested. SWITCHING CHARACTERISTICS over recommended operating free-air temperature range, VCC = 5 V ± 0.5 V (unless otherwise noted) (see Figure 1) PARAMETER tPLH tPHL tPLH tPHL (1) FROM (INPUT) TO (OUTPUT) LOAD CAPACITANCE A Y CL = 15 pF A Y CL = 50 pF TA = 25°C TA = –55°C TO 125°C TA = –40°C TO 85°C SN54AHC04 SN74AHC04 MIN MIN MAX MAX TA = –40°C TO 125°C Recommended UNIT SN74AHC04 TYP MAX 3.8 (1) 5.5 (1) 1 (1) 6.5 (1) 1 6.5 MIN 1 MAX 6.5 3.8 (1) 5.5 (1) 1 (1) 6.5 (1) 1 6.5 1 6.5 5.3 7.5 1 8.5 1 8.5 1 8.5 5.3 7.5 1 8.5 1 8.5 1 8.5 ns ns On products compliant to MIL-PRF-38535, this parameter is not production tested. Copyright © 1995–2013, Texas Instruments Incorporated Product Folder Links: SN74AHC04 SN54AHC04 Submit Documentation Feedback 3 SN74AHC04 SN54AHC04 SCLS231N – OCTOBER 1995 – REVISED MAY 2013 www.ti.com NOISE CHARACTERISTICS VCC = 5 V, CL = 50 pF, TA = 25°C (1) SN74AHC04 PARAMETER MIN TYP UNIT MAX VOL(P) Quiet output, maximum dynamic VOL 0.4 V VOL(V) Quiet output, minimum dynamic VOL –0.4 V VOH(V) Quiet output, minimum dynamic VOH 4.8 V VIH(D) High-level dynamic input voltage VIL(D) Low-level dynamic input voltage (1) 3.5 V 1.5 V Characteristics are for surface-mount packages only. OPERATING CHARACTERISTICS VCC = 5 V, TA = 25°C PARAMETER Cpd 4 Power dissipation capacitance Submit Documentation Feedback TEST CONDITIONS No load, f = 1 MHz TYP 12 UNIT pF Copyright © 1995–2013, Texas Instruments Incorporated Product Folder Links: SN74AHC04 SN54AHC04 SN74AHC04 SN54AHC04 www.ti.com SCLS231N – OCTOBER 1995 – REVISED MAY 2013 PARAMETER MEASUREMENT INFORMATION VCC From Output Under Test RL = 1 kΩ From Output Under Test Test Point S1 Open TEST GND CL (see Note A) CL (see Note A) S1 tPLH/tPHL tPLZ/tPZL tPHZ/tPZH Open Drain Open VCC GND VCC LOAD CIRCUIT FOR 3-STATE AND OPEN-DRAIN OUTPUTS LOAD CIRCUIT FOR TOTEM-POLE OUTPUTS VCC 50% VCC Timing Input tw tsu VCC 50% VCC 50% VCC Input 0V th VCC 50% VCC Data Input 50% VCC 0V 0V VOLTAGE WAVEFORMS SETUP AND HOLD TIMES VOLTAGE WAVEFORMS PULSE DURATION VCC 50% VCC Input 50% VCC 0V tPLH tPHL VOH In-Phase Output 50% VCC 50% VCC VOL tPHL Out-of-Phase Output Output Waveform 1 S1 at VCC (see Note B) 50% VCC VOH 50% VCC VOL VOLTAGE WAVEFORMS PROPAGATION DELAY TIMES INVERTING AND NONINVERTING OUTPUTS 50% VCC 0V tPZL tPLZ ≈VCC 50% VCC tPZH tPLH 50% VCC VCC Output Control VOL + 0.3 V VOL tPHZ Output Waveform 2 S1 at GND (see Note B) 50% VCC VOH − 0.3 V VOH ≈0 V VOLTAGE WAVEFORMS ENABLE AND DISABLE TIMES LOW- AND HIGH-LEVEL ENABLING A. CL includes probe and jig capacitance. B. Waveform 1 is for an output with internal conditions such that the output is low except when disabled by the output control. Waveform 2 is for an output with internal conditions such that the output is high except when disabled by the output control. C. All input pulses are supplied by generators having the following characteristics: PRR ≤ 1 MHz, ZO = 50 Ω, tr ≤ 3 ns, tf ≤ 3 ns. D. The outputs are measured one at a time with one input transition per measurement. E. All parameters and waveforms are not applicable to all devices. Figure 1. Load Circuit and Voltage Waveforms Copyright © 1995–2013, Texas Instruments Incorporated Product Folder Links: SN74AHC04 SN54AHC04 Submit Documentation Feedback 5 SN74AHC04 SN54AHC04 SCLS231N – OCTOBER 1995 – REVISED MAY 2013 www.ti.com REVISION HISTORY Changes from Revision M (July 2003) to Revision N Page • Changed document format from Quicksilver to DocZone. .................................................................................................... 1 • Extended operating temperature range to 125°C ................................................................................................................. 2 6 Submit Documentation Feedback Copyright © 1995–2013, Texas Instruments Incorporated Product Folder Links: SN74AHC04 SN54AHC04 PACKAGE OPTION ADDENDUM www.ti.com 14-Oct-2022 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Pins Package Drawing Qty Eco Plan (2) Lead finish/ Ball material MSL Peak Temp Op Temp (°C) Device Marking (3) Samples (4/5) (6) 5962-9680501Q2A ACTIVE LCCC FK 20 1 Non-RoHS & Green SNPB N / A for Pkg Type -55 to 125 59629680501Q2A SNJ54AHC 04FK 5962-9680501QCA ACTIVE CDIP J 14 1 Non-RoHS & Green SNPB N / A for Pkg Type -55 to 125 5962-9680501QC A SNJ54AHC04J 5962-9680501QDA ACTIVE CFP W 14 1 Non-RoHS & Green SNPB N / A for Pkg Type -55 to 125 5962-9680501QD A SNJ54AHC04W SN74AHC04D ACTIVE SOIC D 14 50 RoHS & Green NIPDAU Level-1-260C-UNLIM -40 to 125 AHC04 Samples SN74AHC04DBR ACTIVE SSOP DB 14 2000 RoHS & Green NIPDAU Level-1-260C-UNLIM -40 to 125 HA04 Samples SN74AHC04DG4 ACTIVE SOIC D 14 50 RoHS & Green NIPDAU Level-1-260C-UNLIM -40 to 125 AHC04 Samples SN74AHC04DGVR ACTIVE TVSOP DGV 14 2000 RoHS & Green NIPDAU Level-1-260C-UNLIM -40 to 125 HA04 Samples SN74AHC04DR ACTIVE SOIC D 14 2500 RoHS & Green NIPDAU Level-1-260C-UNLIM -40 to 125 AHC04 Samples SN74AHC04DRG4 ACTIVE SOIC D 14 2500 RoHS & Green NIPDAU Level-1-260C-UNLIM -40 to 125 AHC04 Samples SN74AHC04N ACTIVE PDIP N 14 25 RoHS & Green NIPDAU N / A for Pkg Type -40 to 125 SN74AHC04N Samples SN74AHC04NSR ACTIVE SO NS 14 2000 RoHS & Green NIPDAU Level-1-260C-UNLIM -40 to 125 AHC04 Samples SN74AHC04PW ACTIVE TSSOP PW 14 90 RoHS & Green NIPDAU Level-1-260C-UNLIM -40 to 125 HA04 Samples SN74AHC04PWR ACTIVE TSSOP PW 14 2000 RoHS & Green NIPDAU Level-1-260C-UNLIM -40 to 125 HA04 Samples SN74AHC04PWRG4 ACTIVE TSSOP PW 14 2000 RoHS & Green NIPDAU Level-1-260C-UNLIM -40 to 125 HA04 Samples SN74AHC04RGYR ACTIVE VQFN RGY 14 3000 RoHS & Green NIPDAU Level-2-260C-1 YEAR -40 to 125 HA04 Samples SNJ54AHC04FK ACTIVE LCCC FK 20 1 Non-RoHS & Green SNPB N / A for Pkg Type -55 to 125 59629680501Q2A SNJ54AHC 04FK Addendum-Page 1 Samples Samples Samples Samples PACKAGE OPTION ADDENDUM www.ti.com Orderable Device 14-Oct-2022 Status (1) Package Type Package Pins Package Drawing Qty Eco Plan (2) Lead finish/ Ball material MSL Peak Temp Op Temp (°C) (3) Device Marking Samples (4/5) (6) SNJ54AHC04J ACTIVE CDIP J 14 1 Non-RoHS & Green SNPB N / A for Pkg Type -55 to 125 5962-9680501QC A SNJ54AHC04J SNJ54AHC04W ACTIVE CFP W 14 1 Non-RoHS & Green SNPB N / A for Pkg Type -55 to 125 5962-9680501QD A SNJ54AHC04W (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) RoHS: TI defines "RoHS" to mean semiconductor products that are compliant with the current EU RoHS requirements for all 10 RoHS substances, including the requirement that RoHS substance do not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, "RoHS" products are suitable for use in specified lead-free processes. TI may reference these types of products as "Pb-Free". RoHS Exempt: TI defines "RoHS Exempt" to mean products that contain lead but are compliant with EU RoHS pursuant to a specific EU RoHS exemption. Green: TI defines "Green" to mean the content of Chlorine (Cl) and Bromine (Br) based flame retardants meet JS709B low halogen requirements of