SN74ALS133DR

SN54ALS133, SN74ALS133 13-INPUT POSITIVE-NAND GATES SDAS202B – APRIL 1982 – REVISED DECEMBER 1994 • SN54ALS133 . . . J PACKAGE SN74ALS133 . . . D OR N PACKAGE (TOP VIEW) Package Options Include Plastic Small-Outline (D) Packages, Ceramic Chip Carriers (FK), and Standard Plastic (N) and Ceramic (J) 300-mil DIPs A B C D E F G GND description These devices contain a 13-input positive-NAND gate. They perform the following Boolean functions in positive logic: Y = A• B• C • D • E• F • G • H• I • J • K• L • M Y = A+ B+ C+ D + E+ F + G + H+ I + J + K+ L + M The SN54ALS133 is characterized for operation over the full military temperature range of – 55°C to 125°C. The SN74ALS133 is characterized for operation from 0°C to 70°C. All inputs H 2 15 3 14 4 13 5 12 6 11 7 10 8 9 VCC M L K J I H Y B A NC VCC M 3 C D NC E F OUTPUT Y L H 4 2 1 20 19 18 5 17 6 16 7 15 8 14 9 10 11 12 13 L K NC J I G GND NC Y H One or more inputs L 16 SN54ALS133 . . . FK PACKAGE (TOP VIEW) FUNCTION TABLE INPUTS A – M 1 NC – No internal connection logic symbol† A B C D E F G H I J K L M 1 logic diagram (positive logic) A & 2 B 3 C 4 D 5 E 6 F 7 9 G Y 10 H 11 I 12 J 13 K 14 L 15 M 1 2 3 4 5 6 7 9 Y 10 11 12 13 14 15 † This symbol is in accordance with ANSI/IEEE Std 91-1984 and IEC Publication 617-12. Pin numbers shown are for the D, J, and N packages. Copyright  1994, Texas Instruments Incorporated PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 1 SN54ALS133, SN74ALS133 13-INPUT POSITIVE-NAND GATES SDAS202B – APRIL 1982 – REVISED DECEMBER 1994 absolute maximum ratings over operating free-air temperature range (unless otherwise noted)† Supply voltage, VCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 V Input voltage, VI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 V Operating free-air temperature range, TA: SN54ALS133 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 55°C to 125°C SN74ALS133 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0°C to 70°C Storage temperature range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 65°C to 150°C † Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. recommended operating conditions SN54ALS133 VCC VIH Supply voltage High-level input voltage SN74ALS133 MIN NOM MAX MIN NOM MAX 4.5 5 5.5 4.5 5 5.5 2 2 VIL Low level input voltage Low-level 0.8‡ 0.7§ IOH IOL High-level output current – 0.4 Low-level output current – 55 125 V V 4 TA Operating free-air temperature ‡ Applies over temperature range – 55°C to 70°C § Applies over temperature range 70°C to 125°C UNIT 0 0.8 – 0.4 mA 8 mA 70 °C V electrical characteristics over recommended operating free-air temperature range (unless otherwise noted) PARAMETER TEST CONDITIONS VIK VOH VCC = 4.5 V, VCC = 4.5 V to 5.5 V, II = –18 mA IOH = – 0.4 mA VOL 5V VCC = 4 4.5 IOL = 4 mA IOL = 8 mA II IIH VCC = 5.5 V, VCC = 5.5 V, VI = 7 V VI = 2.7 V IIL IO# VCC = 5.5 V, VCC = 5.5 V, VI = 0.4 V VO = 2.25 V ICCH ICCL VCC = 5.5 V, VCC = 5.5 V, VI = 0 VI = 4.5 V SN54ALS133 TYP¶ MAX MIN SN74ALS133 TYP¶ MAX MIN –1.2 VCC – 2 –1.5 VCC – 2 0.25 0.5 V V 0.25 0.4 0.35 0.5 0.1 – 20 UNIT 0.1 V mA 20 20 µA – 0.1 – 0.1 mA –112 mA mA –112 – 30 0.24 0.34 0.24 0.34 0.56 0.8 0.56 0.08 mA ¶ All typical values are at VCC = 5 V, TA = 25°C. # The output conditions have been chosen to produce a current that closely approximates one half of the true short-circuit output current, IOS. 2 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 SN54ALS133, SN74ALS133 13-INPUT POSITIVE-NAND GATES SDAS202B – APRIL 1982 – REVISED DECEMBER 1994 switching characteristics (see Figure 1) PARAMETER tPLH tPHL FROM (INPUT) Any TO (OUTPUT) Y VCC = 4.5 V to 5.5 V, CL = 50 pF, RL = 500 Ω, TA = MIN to MAX† SN54ALS133 SN74ALS133 MIN MAX MIN 1 16 3 11 1 47 5 25 UNIT MAX ns † For conditions shown as MIN or MAX, use the appropriate value specified under recommended operating conditions. POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 3 SN54ALS133, SN74ALS133 13-INPUT POSITIVE-NAND GATES SDAS202B – APRIL 1982 – REVISED DECEMBER 1994 PARAMETER MEASUREMENT INFORMATION SERIES 54ALS/74ALS AND 54AS/74AS DEVICES 7V RL = R1 = R2 VCC S1 RL R1 Test Point From Output Under Test CL (see Note A) From Output Under Test RL Test Point From Output Under Test CL (see Note A) CL (see Note A) LOAD CIRCUIT FOR BI-STATE TOTEM-POLE OUTPUTS LOAD CIRCUIT FOR OPEN-COLLECTOR OUTPUTS 3.5 V Timing Input Test Point LOAD CIRCUIT FOR 3-STATE OUTPUTS 3.5 V High-Level Pulse 1.3 V R2 1.3 V 1.3 V 0.3 V 0.3 V Data Input tw th tsu 3.5 V 1.3 V 3.5 V Low-Level Pulse 1.3 V 0.3 V 1.3 V 0.3 V VOLTAGE WAVEFORMS SETUP AND HOLD TIMES VOLTAGE WAVEFORMS PULSE DURATIONS 3.5 V Output Control (low-level enabling) 1.3 V 1.3 V 0.3 V tPZL Waveform 1 S1 Closed (see Note B) tPLZ [3.5 V 1.3 V tPHZ tPZH Waveform 2 S1 Open (see Note B) 1.3 V VOL 0.3 V VOH 1.3 V 0.3 V [0 V 3.5 V 1.3 V Input 1.3 V 0.3 V tPHL tPLH VOH In-Phase Output 1.3 V 1.3 V VOL tPLH tPHL VOH Out-of-Phase Output (see Note C) 1.3 V 1.3 V VOL VOLTAGE WAVEFORMS PROPAGATION DELAY TIMES VOLTAGE WAVEFORMS ENABLE AND DISABLE TIMES, 3-STATE OUTPUTS NOTES: A. CL includes probe and jig capacitance. B. Waveform 1 is for an output with internal conditions such that the output is low except when disabled by the output control. Waveform 2 is for an output with internal conditions such that the output is high except when disabled by the output control. C. When measuring propagation delay items of 3-state outputs, switch S1 is open. D. All input pulses have the following characteristics: PRR ≤ 1 MHz, tr = tf = 2 ns, duty cycle = 50%. E. The outputs are measured one at a time with one transition per measurement. Figure 1. Load Circuits and Voltage Waveforms 4 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 PACKAGE OPTION ADDENDUM www.ti.com 10-Jun-2022 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Pins Package Drawing Qty Eco Plan (2) Lead finish/ Ball material MSL Peak Temp Op Temp (°C) Device Marking (3) Samples (4/5) (6) 5962-8859001FA ACTIVE CFP W 16 1 Non-RoHS & Green SNPB N / A for Pkg Type -55 to 125 5962-8859001FA SNJ54ALS133W Samples JM38510/37005BEA ACTIVE CDIP J 16 1 Non-RoHS & Green SNPB N / A for Pkg Type -55 to 125 JM38510/ 37005BEA Samples M38510/37005BEA ACTIVE CDIP J 16 1 Non-RoHS & Green SNPB N / A for Pkg Type -55 to 125 JM38510/ 37005BEA Samples SN54ALS133J ACTIVE CDIP J 16 1 Non-RoHS & Green SNPB N / A for Pkg Type -55 to 125 SN54ALS133J Samples SN74ALS133D ACTIVE SOIC D 16 40 RoHS & Green NIPDAU Level-1-260C-UNLIM 0 to 70 ALS133 Samples SN74ALS133DR ACTIVE SOIC D 16 2500 RoHS & Green NIPDAU Level-1-260C-UNLIM 0 to 70 ALS133 Samples SN74ALS133N ACTIVE PDIP N 16 25 RoHS & Green NIPDAU N / A for Pkg Type 0 to 70 SN74ALS133N Samples SN74ALS133NSR ACTIVE SO NS 16 2000 RoHS & Green NIPDAU Level-1-260C-UNLIM 0 to 70 ALS133 Samples SNJ54ALS133FK ACTIVE LCCC FK 20 1 Non-RoHS & Green SNPB N / A for Pkg Type -55 to 125 SNJ54ALS 133FK Samples SNJ54ALS133J ACTIVE CDIP J 16 1 Non-RoHS & Green SNPB N / A for Pkg Type -55 to 125 SNJ54ALS133J Samples SNJ54ALS133W ACTIVE CFP W 16 1 Non-RoHS & Green SNPB N / A for Pkg Type -55 to 125 5962-8859001FA SNJ54ALS133W Samples (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) RoHS: TI defines "RoHS" to mean semiconductor products that are compliant with the current EU RoHS requirements for all 10 RoHS substances, including the requirement that RoHS substance do not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, "RoHS" products are suitable for use in specified lead-free processes. TI may reference these types of products as "Pb-Free". RoHS Exempt: TI defines "RoHS Exempt" to mean products that contain lead but are compliant with EU RoHS pursuant to a specific EU RoHS exemption. Green: TI defines "Green" to mean the content of Chlorine (Cl) and Bromine (Br) based flame retardants meet JS709B low halogen requirements of