SN74ALS30AD

SN54ALS30A, SN54AS30, SN74ALS30A, SN74AS30 www.ti.com SDAS010E – APRIL 1982 – REVISED OCTOBER 2012 8-INPUT POSITIVE-NAND GATES Check for Samples: SN54ALS30A, SN54AS30, SN74ALS30A, SN74AS30 FEATURES 1 8-Input Positive-NAND Gates Available in J, DW, N, and FK Packages These devices contain an 8-input positive-NAND gate and perform the following Boolean functions in positive logic: Y = A • B •C • D • E • F • G • H or Y=A+B+C+D+E+F+G SN54ALS30A, SN54AS30 . . . FK PACKAGE (TOP VIEW) B A N.C. VCC SN54ALS30A, SN54AS30 . . . J PACKAGE SN74ALS30A, SN74AS30 . . . DW OR N PACKAGE SN74AS30 . . . DB PACKAGE DESCRIPTION (TOP VIEW) 1 2 14 VCC 13 N.C. 3 12 H 11 G 10 N.C. 4 5 6 7 4 1 20 19 18 5 17 6 16 3 2 C N.C. D N.C. E 9 N.C. 8 Y 7 15 8 14 9 10 11 12 13 H N.C. G N.C. N.C. F GND N.C. Y N.C. A B C D E F GND N.C. • • N.C. – No internal connection ORDERING INFORMATION PACKAGE (1) TA PDIP – N 0°C to 70°C SOIC – D SSOP – DB CDIP – J (2) Tube (1) (2) TOP-SIDE MARKING SN74ALS30AN SN74AS30N SN74AS30N Tube SN74AS30AD Tape and reel SN74ALS30ADR Tube SN74AS30D Tape and reel SN74AS30DR Tape and reel SN74AS30DBR AS30 SNJ54ALS30AJ SNJ54ALS30AJ SNJ54AS30J SNJ54AS30J SNJ54ALS30AFK SNJ54ALS30AFK SNJ54AS30FK SNJ54AS30FK Tube –55°C to 125°C LCCC –FK ORDERABLE PART NUMBER SN74ALS30AN Tube ALS30A AS30 Package drawings, thermal data, and symbolization are available at www.ti.com/packaging. For the most current package and ordering information, see the Package Option Addendum at the end of this document, or see the TI website at www.ti.com. 1 Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of the Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. Copyright © 1982–2012, Texas Instruments Incorporated SN54ALS30A, SN54AS30, SN74ALS30A, SN74AS30 SDAS010E – APRIL 1982 – REVISED OCTOBER 2012 www.ti.com Table 1. FUNCTION TABLE INPUTS A–H OUTPUT Y All inputs H L One or more inputs L H LOGIC SYMBOL 1 A B 2 3 C D E F G H A. 8 4 Y 5 6 11 12 This symbol is in accordance with ANSI/IEEE Std 91-1984 and IEC Publication 617-12. Pin number shown are for the D, DB, J, and N packages. LOGIC DIAGRAM (POSITIVE LOGIC) 1 A B 2 3 C D E F G H 4 8 5 Y 6 11 12 Pin number shown are for the D, DB, J, and N packages. ABSOLUTE MAXIMUM RATINGS (1) over operating free-air temperature range (unless otherwise noted) MIN MAX UNIT VCC Supply voltage range –0.5 7 V VI Input voltage range –0.5 7 V θJA Tstg (1) (2) 2 Package thermal impedance (2) D package 86 DB package 96 N package 80 Storage temperature range –65 150 °C/W °C Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. The package thermal impedance is calculated in accordance with JESD 51-7. Submit Documentation Feedback Copyright © 1982–2012, Texas Instruments Incorporated Product Folder Links: SN54ALS30A SN54AS30 SN74ALS30A SN74AS30 SN54ALS30A, SN54AS30, SN74ALS30A, SN74AS30 www.ti.com SDAS010E – APRIL 1982 – REVISED OCTOBER 2012 RECOMMENDED OPERATING CONDITIONS over operating free-air temperature range (unless otherwise noted) VCC Supply voltage VIH High-level input voltage VIL Low-level input voltage IOH High-level output current MIN NOM MAX 4.5 5 5.5 V 0.8 (1) (1) (2) V 0.7 (2) 'ALS30A –0.4 'AS30 Low-level output current 4 SN74ALS30A Operating free-air temperature mA –2 8 'AS30 TA V 2 SN54ALS30A IOL UNIT mA 20 SN54ALS30A, SN54AS30 –55 125 SN74ALS30A, SN74AS30 0 70 °C Applies to the ’AS30 and SN74ALS30A across the full operating temperature range, and SN54ALS30A over the temperature range of –55°C to 7°°C. Applies to the SN54ALS30A over the temperature range of 70°C to 125°C. ELECTRICAL CHARACTERISTICS over operating free-air temperature range (unless otherwise noted) PARAMETER VIK VCC = 4.5 V, VOH VCC = 4.5 V to 5.5 V, VOL VCC = 4.5 V V VCC – 2 'AS30 VCC – 2 IOL = 4 mA 'ALS30A 0.25 0.4 IOL = 8 mA SN74ALS30A 0.35 0.5 IOL = 20 mA 'AS30 0.35 0.5 VCC = 5.5 V, VI = 2.7 V VCC = 5.5 V, –1.5 'ALS30A IIH IO UNIT IOH = –2 mA VI = 7 V (2) 'AS30 MAX IOH = –0.4 mA VCC = 5.5 V, VCC = 5.5 V, TYP (1) MIN 'ALS30A II = –18 mA II IIL (1) (2) TEST CONDITIONS VI = 0.4 V VO = 2.25 V V VCC = 5.5 V, VI = 0 V ICCL VCC = 5.5 V, VI = 4.5 V 0.1 mA 20 μA 'ALS30A –0.1 'AS30 –0.5 SN54ALS30A –20 –112 SN74ALS30A –30 –112 'AS30 –30 –112 'ALS30A ICCH 'AS30 'ALS30A 'AS30 V 0.22 0.36 0.9 1.5 0.54 0.9 3 4.9 mA mA mA mA All typical values are at VCC = 5 V, TA = 25°C. The output conditions have been chosen to produce a current that closely approximates one half of the true short-circuit output current, IOS. SWITCHING CHARACTERISTICS over recommended operating conditions (unless otherwise noted (see Figure 1) PARAMETER tPLH FROM (INPUT) A, B, C, D, E, F, G, or H Copyright © 1982–2012, Texas Instruments Incorporated TO (OUTPUT) Y MIN MAX SN54ALS30A 3 15 SN74ALS30A 3 10 SN54AS30 1 5.5 SN74AS30 1 5 UNIT Submit Documentation Feedback Product Folder Links: SN54ALS30A SN54AS30 SN74ALS30A SN74AS30 ns 3 SN54ALS30A, SN54AS30, SN74ALS30A, SN74AS30 SDAS010E – APRIL 1982 – REVISED OCTOBER 2012 www.ti.com SWITCHING CHARACTERISTICS (continued) over recommended operating conditions (unless otherwise noted (see Figure 1) PARAMETER tPHL 4 FROM (INPUT) A, B, C, D, E, F, G, or H Submit Documentation Feedback TO (OUTPUT) Y MIN MAX SN54ALS30A 3 15 SN74ALS30A 3 12 SN54AS30 1 5 SN74AS30 1 4.5 UNIT ns Copyright © 1982–2012, Texas Instruments Incorporated Product Folder Links: SN54ALS30A SN54AS30 SN74ALS30A SN74AS30 SN54ALS30A, SN54AS30, SN74ALS30A, SN74AS30 www.ti.com SDAS010E – APRIL 1982 – REVISED OCTOBER 2012 PARAMETER MEASUREMENT INFORMATION 7V VCC S1 500 Ω From Output Under Test From Output Under Test Test Point CL = 50 pF (see Note A) CL = 50 pF (see Note A) 500 Ω LOAD CIRCUIT FOR OPEN-COLLECTOR OUTPUTS LOAD CIRCUIT FOR BI-STATE TOTEM-POLE OUTPUTS 3V Timing Input Test Point 500 Ω LOAD CIRCUIT FOR 3-STATE OUTPUTS 3V High-Level Pulse 1.5 V 500 Ω From Output Under Test CL = 50 pF (see Note A) Test Point 1.5 V 1.5 V 0V 0V tw th tsu 3V Data Input 1.5 V 3V Low-Level Pulse 1.5 V 0V 1.5 V 1.5 V 0V VOLTAGE WAVEFORMS PULSE DURATIONS VOLTAGE WAVEFORMS SETUP AND HOLD TIMES 3V Output Control 1.5 V 1.5 V 3V 0V tPZL Input tPLZ 1.5 V 0V ≈3 V Waveform 1 S1 Closed (see Note B) tPLH 1.5 V 0.3 V tPZH Waveform 2 S1 Open (see Note B) 1.5 V VOL In-Phase Output tPHZ 0.3 V VOH 1.5 V 1.5 V tPHL tPHL VOH 1.5 V VOL tPLH Out-of-Phase Output (see Note C) VOH 1.5 V 1.5 V VOL ≈0 V VOLTAGE WAVEFORMS ENABLE AND DISABLE TIMES, 3-STATE OUTPUTS VOLTAGE WAVEFORMS PROPAGATION DELAY TIMES A. CL includes probe and jig capacitance. B. Waveform 1 is for an output with internal conditions such that the output is low except when disabled by the output control. Waveform 2 is for an output with internal conditions such that the output is high except when disabled by the output control. C. When measuring propagation delay items of 3-state outputs, switch S1 is open. D. All input pulses have the following characteristics: PRR ≤ 1 MHz, tr = tf = 2 ns, duty cycle = 50%. E. The outputs are measured one at a time with one transition per measurement. Figure 1. Load Circuits and Voltage Waveforms Copyright © 1982–2012, Texas Instruments Incorporated Submit Documentation Feedback Product Folder Links: SN54ALS30A SN54AS30 SN74ALS30A SN74AS30 5 SN54ALS30A, SN54AS30, SN74ALS30A, SN74AS30 SDAS010E – APRIL 1982 – REVISED OCTOBER 2012 www.ti.com REVISION HISTORY Changes from Original (April 2009) to Revision E • 6 Page Updated ORDERING INFORMATION table. ........................................................................................................................ 1 Submit Documentation Feedback Copyright © 1982–2012, Texas Instruments Incorporated Product Folder Links: SN54ALS30A SN54AS30 SN74ALS30A SN74AS30 PACKAGE OPTION ADDENDUM www.ti.com 14-Oct-2022 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Pins Package Drawing Qty Eco Plan (2) Lead finish/ Ball material MSL Peak Temp Op Temp (°C) Device Marking (3) Samples (4/5) (6) 5962-86837012A ACTIVE LCCC FK 20 1 Non-RoHS & Green SNPB N / A for Pkg Type -55 to 125 596286837012A SNJ54ALS 30AFK 5962-8683701DA ACTIVE CFP W 14 1 Non-RoHS & Green SNPB N / A for Pkg Type -55 to 125 5962-8683701DA SNJ54ALS30AW 5962-9755801QCA ACTIVE CDIP J 14 1 Non-RoHS & Green SNPB N / A for Pkg Type -55 to 125 5962-9755801QC A SNJ54AS30J JM38510/37004B2A ACTIVE LCCC FK 20 1 Non-RoHS & Green SNPB N / A for Pkg Type -55 to 125 JM38510/ 37004B2A Samples JM38510/37004BCA ACTIVE CDIP J 14 1 Non-RoHS & Green SNPB N / A for Pkg Type -55 to 125 JM38510/ 37004BCA Samples M38510/37004B2A ACTIVE LCCC FK 20 1 Non-RoHS & Green SNPB N / A for Pkg Type -55 to 125 JM38510/ 37004B2A Samples M38510/37004BCA ACTIVE CDIP J 14 1 Non-RoHS & Green SNPB N / A for Pkg Type -55 to 125 JM38510/ 37004BCA Samples SN54ALS30AJ ACTIVE CDIP J 14 1 Non-RoHS & Green SNPB N / A for Pkg Type -55 to 125 SN54ALS30AJ Samples SN74ALS30AD ACTIVE SOIC D 14 50 RoHS & Green NIPDAU Level-1-260C-UNLIM 0 to 70 ALS30A Samples SN74ALS30ADB ACTIVE SSOP DB 14 80 RoHS & Green NIPDAU Level-1-260C-UNLIM G30A Samples SN74ALS30ADBE4 ACTIVE SSOP DB 14 80 RoHS & Green NIPDAU Level-1-260C-UNLIM G30A Samples SN74ALS30ADR ACTIVE SOIC D 14 2500 RoHS & Green NIPDAU Level-1-260C-UNLIM 0 to 70 ALS30A Samples SN74ALS30AN ACTIVE PDIP N 14 25 RoHS & Green NIPDAU N / A for Pkg Type 0 to 70 SN74ALS30AN Samples SN74AS30DR ACTIVE SOIC D 14 2500 RoHS & Green NIPDAU Level-1-260C-UNLIM 0 to 70 AS30 Samples SN74AS30N ACTIVE PDIP N 14 25 RoHS & Green NIPDAU N / A for Pkg Type 0 to 70 SN74AS30N Samples SNJ54ALS30AFK ACTIVE LCCC FK 20 1 Non-RoHS & Green SNPB N / A for Pkg Type -55 to 125 596286837012A SNJ54ALS 30AFK Addendum-Page 1 Samples Samples Samples Samples PACKAGE OPTION ADDENDUM www.ti.com 14-Oct-2022 Orderable Device Status (1) Package Type Package Pins Package Drawing Qty Eco Plan (2) Lead finish/ Ball material MSL Peak Temp Op Temp (°C) (3) Device Marking Samples (4/5) (6) SNJ54ALS30AJ ACTIVE CDIP J 14 1 Non-RoHS & Green SNPB N / A for Pkg Type -55 to 125 SNJ54ALS30AJ Samples SNJ54ALS30AW ACTIVE CFP W 14 1 Non-RoHS & Green SNPB N / A for Pkg Type -55 to 125 5962-8683701DA SNJ54ALS30AW Samples SNJ54AS30J ACTIVE CDIP J 14 1 Non-RoHS & Green SNPB N / A for Pkg Type -55 to 125 5962-9755801QC A SNJ54AS30J (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) RoHS: TI defines "RoHS" to mean semiconductor products that are compliant with the current EU RoHS requirements for all 10 RoHS substances, including the requirement that RoHS substance do not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, "RoHS" products are suitable for use in specified lead-free processes. TI may reference these types of products as "Pb-Free". RoHS Exempt: TI defines "RoHS Exempt" to mean products that contain lead but are compliant with EU RoHS pursuant to a specific EU RoHS exemption. Green: TI defines "Green" to mean the content of Chlorine (Cl) and Bromine (Br) based flame retardants meet JS709B low halogen requirements of