SN74ALS666DWRE4

SN74ALS666, SN74ALS667 8-BIT D-TYPE TRANSPARENT READ-BACK LATCHES WITH 3-STATE OUTPUTS SDAS227A – JUNE 1984 – REVISED JANUARY 1995 • • • • • 3-State I/O-Type Read-Back Inputs Bus-Structured Pinout Choice of True or Inverting Logic – SN74ALS666 . . . True Outputs – SN74ALS667 . . . Inverted Outputs Preset and Clear Inputs Package Options Include Plastic Small-Outline (DW) Packages and Standard Plastic (NT) 300-mil DIPs description These 8-bit D-type transparent latches are designed specifically for storing the contents of the input data bus, plus reading back the stored data onto the input data bus. In addition, they provide a 3-state buffer-type output and are easily utilized in bus-structured applications. While the latch enable (LE) is high, the Q outputs of the SN74ALS666 follow the data (D) inputs. The Q outputs of the SN74ALS667 provide the inverse of the data applied to its D inputs. The Q or Q output of both devices is in the high-impedance state if either output-enable (OE1 or OE2) input is at a high logic level. Read back is provided through the read-back control (OERB) input. When OERB is taken low, the data present at the output of the data latches passes back onto the input data bus. When OERB is taken high, the output of the data latches is isolated from the D inputs. OERB does not affect the internal operation of the latches; however, caution should be exercised to avoid a bus conflict. SN74ALS666 . . . DW OR NT PACKAGE (TOP VIEW) OERB OE1 1D 2D 3D 4D 5D 6D 7D 8D CLR GND 1 24 2 23 3 22 4 21 5 20 6 19 7 18 8 17 9 16 10 15 11 14 12 13 VCC OE2 1Q 2Q 3Q 4Q 5Q 6Q 7Q 8Q PRE LE SN74ALS667 . . . DW OR NT PACKAGE (TOP VIEW) OERB OE1 1D 2D 3D 4D 5D 6D 7D 8D CLR GND 1 24 2 23 3 22 4 21 5 20 6 19 7 18 8 17 9 16 10 15 11 14 12 13 VCC OE2 1Q 2Q 3Q 4Q 5Q 6Q 7Q 8Q PRE LE The SN74ALS666 and SN74ALS667 are characterized for operation from 0°C to 70°C. Copyright  1995, Texas Instruments Incorporated PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 1 SN74ALS666, SN74ALS667 8-BIT D-TYPE TRANSPARENT READ-BACK LATCHES WITH 3-STATE OUTPUTS SDAS227A – JUNE 1984 – REVISED JANUARY 1995 logic symbols† SN74ALS666 & 2 OE1 OE2 OERB 14 PRE 11 CLR LE 1D 13 3 OE2 EN3 2D 3D 4D 5D 6D 7D 8D OERB S 1 14 11 CLR C1 LE 1D 22 2 4 21 5 20 6 19 7 18 8 17 9 16 10 15 1D 13 3 1Q 2Q 3Q 2D 3D 4D 5Q 5D 6Q 6D 7Q 7D POST OFFICE BOX 655303 S R C1 1D 8D 22 2 1Q 4 21 5 20 6 19 7 18 8 17 9 16 10 15 † These symbols are in accordance with ANSI/IEEE Std 91-1984 and IEC Publication 617-12. 2 EN3 3 4Q 8Q EN2 23 PRE R 3 & 2 OE1 EN2 23 1 SN74ALS667 • DALLAS, TEXAS 75265 2Q 3Q 4Q 5Q 6Q 7Q 8Q SN74ALS666, SN74ALS667 8-BIT D-TYPE TRANSPARENT READ-BACK LATCHES WITH 3-STATE OUTPUTS SDAS227A – JUNE 1984 – REVISED JANUARY 1995 logic diagrams (positive logic) OE1 OE2 OERB PRE CLR LE 1D 2 SN74ALS666 23 1 14 11 13 S 3 1D 22 C1 1Q R To Seven Other Channels OE1 OE2 OERB PRE CLR LE 1D 2 SN74ALS667 23 1 14 11 13 S 3 1D C1 22 1Q R To Seven Other Channels POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 3 SN74ALS666, SN74ALS667 8-BIT D-TYPE TRANSPARENT READ-BACK LATCHES WITH 3-STATE OUTPUTS SDAS227A – JUNE 1984 – REVISED JANUARY 1995 timing diagram Data Bus Input Data tsu Input Data Read Back th LE tsu† tdis OERB tpd tpd Q CLR = H, PRE = H, OE1 = L, OE2 = L. † This setup time ensures the read-back circuit does not create a conflict on the input data bus. absolute maximum ratings over operating free-air temperature range (unless otherwise noted)‡ Supply voltage, VCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 V Input voltage, VI (all inputs except D inputs) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 V Voltage applied to D inputs and to disabled 3-state outputs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.5 V Operating free-air temperature range, TA: SN74ALS666, SN74ALS667 . . . . . . . . . . . . . . . . . . . . 0°C to 70°C Storage temperature range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 65°C to 150°C ‡ Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. recommended operating conditions SN74ALS666 SN74ALS667 VCC VIH Supply voltage VIL Low-level input voltage High-level input voltage IOH High level output current High-level IOL Low level output current Low-level tw Pulse duration NOM MAX 4.5 5 5.5 2 0.8 – 2.6 D – 0.4 Q 24 D 8 LE high 10 CLR low 10 PRE low 10 Data before LE↓ 10 Data before OERB↓ 10 Setup time th TA Hold time, data after LE↓ 5 Operating free-air temperature 0 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 V V Q tsu 4 UNIT MIN V mA mA ns ns ns 70 °C SN74ALS666, SN74ALS667 8-BIT D-TYPE TRANSPARENT READ-BACK LATCHES WITH 3-STATE OUTPUTS SDAS227A – JUNE 1984 – REVISED JANUARY 1995 electrical characteristics over recommended operating free-air temperature range (unless otherwise noted) PARAMETER TEST CONDITIONS SN74ALS666 SN74ALS667 MIN VIK VOH All outputs VCC = 4.5 V, VCC = 4.5 V to 5.5 V, II = – 18 mA IOH = – 0.4 mA Q or Q VCC = 4.5 V, D inputs VCC = 4 4.5 5V IOH = – 2.6 mA IOL = 4 mA VOL IOZH IOZL II IIH IIL Q or Q 5V VCC = 4 4.5 Q or Q VCC = 5.5 V, VCC = 5.5 V, Q or Q D inputs All others D inputs‡ All others D inputs‡ All others IO§ SN74ALS666 VCC = 5 5.5 5V SN74ALS667 VCC – 2 2.4 0.35 0.5 0.25 0.4 IOL = 24 mA VO = 2.7 V 0.35 0.5 VO = 0.4 V VI = 5.5 V VI = 0 0.4 4V VCC = 5.5 V, VO = 2.25 V Q outputs high 20 µA µA 0.1 20 20 – 0.1 – 0.1 – 30 V – 20 0.1 VI = 7 V V V 3.2 IOL = 8 mA IOL = 12 mA VCC = 5 5.5 5V V, VCC = 5.5 55V V, OERB high – 1.2 0.4 7V VI = 2 2.7 ICC UNIT MAX 0.25 5V VCC = 5 5.5 V, VCC = 5.5 5 5 V, V OERB high TYP† –112 25 50 Q outputs low 40 73 Q outputs disabled 30 55 Q outputs high 25 50 Q outputs low 45 79 Q outputs disabled 30 mA µA mA mA mA 60 † All typical values are at VCC = 5 V, TA = 25°C. ‡ For I/O ports (QA through QH), the parameters IIH and IIL include the off-state output current. § The output conditions have been chosen to produce a current that closely approximates one half of the true short-circuit output current, IOS. POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 5 SN74ALS666, SN74ALS667 8-BIT D-TYPE TRANSPARENT READ-BACK LATCHES WITH 3-STATE OUTPUTS SDAS227A – JUNE 1984 – REVISED JANUARY 1995 switching characteristics (see Figure 1) PARAMETER FROM (INPUT) TO (OUTPUT) MAX 3 14 4 18 6 21 8 27 Q 9 29 D 11 32 Q 7 22 D 9 28 OERB D 4 21 OE1, OE2 Q 4 21 OERB D 1 14 OE1, OE2 Q 1 14 D Q tPLH tPHL LE Q tPHL CLR tPHL ten‡ tdi dis§ PRE UNIT SN74ALS666 MIN tPLH tPHL tPLH VCC = 4.5 V to 5.5 V, CL = 50 pF, TA = MIN to MAX† ns ns ns ns ns ns † For conditions shown as MIN or MAX, use the appropriate value specified under recommended operating conditions. ‡ ten = tPZH or tPZL § tdis = tPHZ or tPLZ switching characteristics (see Figure 1) PARAMETER FROM (INPUT) TO (OUTPUT) MAX 6 20 4 15 9 28 7 22 Q 7 24 D 8 26 Q 8 25 D 9 28 D Q tPLH tPHL LE Q tPHL CLR tPHL ten‡ tdi dis§ PRE OERB D 4 21 OE1, OE2 Q 4 21 OERB D 1 14 Q 1 14 OE1, OE2 † For conditions shown as MIN or MAX, use the appropriate value specified under recommended operating conditions. ‡ ten = tPZH or tPZL § tdis = tPHZ or tPLZ 6 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 UNIT SN74ALS667 MIN tPLH tPHL tPLH VCC = 4.5 V to 5.5 V, CL = 50 pF, TA = MIN to MAX† ns ns ns ns ns ns SN74ALS666, SN74ALS667 8-BIT D-TYPE TRANSPARENT READ-BACK LATCHES WITH 3-STATE OUTPUTS SDAS227A – JUNE 1984 – REVISED JANUARY 1995 PARAMETER MEASUREMENT INFORMATION 7V 7V S1 S1 500 Ω 1 kΩ Test Point From Output Under Test CL (see Note A) CL (see Note A) 500 Ω LOAD CIRCUIT FOR Q OR Q OUTPUTS 1 kΩ LOAD CIRCUIT FOR D OUTPUTS 3.5 V Timing Input Test Point From Output Under Test 1.3 V 3.5 V High-Level Pulse 1.3 V 1.3 V 0.3 V 0.3 V tw th tsu 3.5 V Data Input 1.3 V 1.3 V 0.3 V VOLTAGE WAVEFORMS SETUP AND HOLD TIMES 1.3 V 0.3 V 3.5 V Output Control (low-level enabling) 1.3 V tPHL tPLH VOH 1.3 V 1.3 V tPHL Out-of-Phase Output (see Note D) Waveform 1 S1 Closed (see Note B) VOL tPLH VOH 1.3 V 1.3 V VOL VOLTAGE WAVEFORMS PROPAGATION DELAY TIMES 1.3 V 0.3 V tPZL 1.3 V tPLZ 0.3 V In-Phase Output 1.3 V VOLTAGE WAVEFORMS PULSE DURATIONS 3.5 V 1.3 V Input 3.5 V Low-Level Pulse [3.5 V 1.3 V tPHZ tPZH Waveform 2 S1 Open (see Note B) VOL 0.3 V VOH 1.3 V 0.3 V [0 V VOLTAGE WAVEFORMS ENABLE AND DISABLE TIMES, 3-STATE OUTPUTS NOTES: A. CL includes probe and jig capacitance. B. Waveform 1 is for an output with internal conditions such that the output is low except when disabled by the output control. Waveform 2 is for an output with internal conditions such that the output is high except when disabled by the output control. C. All input pulses have the following characteristics: PRR ≤ 1 MHz, tr = tf = 2 ns, duty cycle = 50%. D. When measuring propagation delay times of 3-state outputs, switch S1 is open. Figure 1. Load Circuits and Voltage Waveforms POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 7 PACKAGE OPTION ADDENDUM www.ti.com 14-Oct-2022 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Pins Package Drawing Qty Eco Plan (2) Lead finish/ Ball material MSL Peak Temp Op Temp (°C) Device Marking (3) Samples (4/5) (6) SN74ALS666DW ACTIVE SOIC DW 24 25 RoHS & Green NIPDAU Level-1-260C-UNLIM 0 to 70 ALS666 Samples SN74ALS667DW ACTIVE SOIC DW 24 25 RoHS & Green NIPDAU Level-1-260C-UNLIM 0 to 70 ALS667 Samples (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) RoHS: TI defines "RoHS" to mean semiconductor products that are compliant with the current EU RoHS requirements for all 10 RoHS substances, including the requirement that RoHS substance do not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, "RoHS" products are suitable for use in specified lead-free processes. TI may reference these types of products as "Pb-Free". RoHS Exempt: TI defines "RoHS Exempt" to mean products that contain lead but are compliant with EU RoHS pursuant to a specific EU RoHS exemption. Green: TI defines "Green" to mean the content of Chlorine (Cl) and Bromine (Br) based flame retardants meet JS709B low halogen requirements of