SN74BCT760DW

SN54BCT760, SN74BCT760 OCTAL BUFFERS/DRIVERS WITH OPEN-COLLECTOR OUTPUTS SCBS034B – JULY 1989 – REVISED NOVEMBER 1993 • • Open-Collector Version of ′BCT244 Open-Collector Outputs Drive Bus Lines or Buffer Memory Address Registers ESD Protection Exceeds 2000 V Per MIL-STD-883C Method 3015 Packages Options Include Plastic Small-Outline (DW) Packages, Ceramic Chip Carriers (FK) and Flatpacks (W), and Standard Plastic and Ceramic 300-mil DIPs (J, N) SN54BCT760 . . . J OR W PACKAGE SN74BCT760 . . . DW OR N PACKAGE (TOP VIEW) 1OE 1A1 2Y4 1A2 2Y3 1A3 2Y2 1A4 2Y1 GND description These octal buffers and line drivers are designed specifically to improve both the performance and density of 3-state memory address drivers, clock drivers, and bus-oriented receivers and transmitters. 1 20 2 19 3 18 4 17 5 16 6 15 7 14 8 13 9 12 10 11 VCC 2OE 1Y1 2A4 1Y2 2A3 1Y3 2A2 1Y4 2A1 2Y4 1A1 1OE VCC SN54BCT760 . . . FK PACKAGE (TOP VIEW) The ′BCT760 is organized as two 4-bit buffers/line drivers with separate output-enable (OE) inputs. When OE is low, the device passes data from the A inputs to the Y outputs. When OE is high, the outputs are in the high-impedance state. 1A2 2Y3 1A3 2Y2 1A4 4 3 2 1 20 19 18 5 17 6 16 7 15 8 14 9 10 11 12 13 1Y1 2A4 1Y2 2A3 1Y3 2Y1 GND 2A1 1Y4 2A2 The SN54BCT760 is characterized for operation over the full military temperature range of – 55°C to 125°C. The SN74BCT760 is characterized for operation from 0°C to 70°C. 2OE • • FUNCTION TABLE (each buffer) INPUTS OE A OUTPUT Y L H H L L L H X H Copyright  1993, Texas Instruments Incorporated PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 2–1 SN54BCT760, SN74BCT760 OCTAL BUFFERS/DRIVERS WITH OPEN-COLLECTOR OUTPUTS SCBS034B – JULY 1989 – REVISED NOVEMBER 1993 logic symbol† 1OE 1A1 1A2 1A3 1A4 1 logic diagram (positive logic) 1OE 2 18 4 16 6 14 8 12 1Y1 1A1 2OE 1Y3 1A2 2A2 2A3 2A4 18 4 16 6 14 8 12 1Y1 1Y2 1Y4 1Y3 EN 1A4 2A1 2 1Y2 1A3 19 1 EN 11 9 13 7 15 5 17 3 1Y4 2Y1 2Y2 2Y3 2OE 19 2Y4 † This symbol is in accordance with ANSI/IEEE Std 91-1984 and IEC Publication 617-12. 2A1 2A2 2A3 2A4 11 9 13 7 15 5 17 3 2Y1 2Y2 2Y3 2Y4 absolute maximum ratings over operating free-air temperature range (unless otherwise noted)‡ Supply voltage range, VCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 0.5 V to 7 V Input voltage range, VI (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 0.5 V to 7 V Input current range, II . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 30 mA to 5 mA Voltage range applied to any output in the disabled or power-off state, VO . . . . . . . . . . . . . . . – 0.5 V to 5.5 V Voltage range applied to any output in the high state, VO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 0.5 V to VCC Current into any output in the low state: SN54BCT760 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96 mA SN74BCT760 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128 mA Operating free-air temperature range: SN54BCT760 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 55°C to 125°C SN74BCT760 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0°C to 70°C Storage temperature range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 65°C to 150°C ‡ Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. NOTE 1: The negative input voltage rating may be exceeded if the input clamp current rating is observed. 2–2 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 SN54BCT760, SN74BCT760 OCTAL BUFFERS/DRIVERS WITH OPEN-COLLECTOR OUTPUTS SCBS034B – JULY 1989 – REVISED NOVEMBER 1993 recommended operating conditions SN54BCT760 SN74BCT760 MIN NOM MAX MIN NOM MAX 4.5 5 5.5 4.5 5 5.5 UNIT VCC VIH Supply voltage VIL VOH Low-level input voltage 0.8 0.8 High-level output voltage 5.5 5.5 V IIK IOL Input clamp current –18 –18 mA 64 mA TA Operating free-air temperature 70 °C High-level input voltage 2 2 Low-level output current V 48 – 55 125 V 0 V electrical characteristics over recommended operating free-air temperature range (unless otherwise noted) PARAMETER VIK VCC = 4.5 V, VOL VCC = 4 4.5 5V II IIH VCC = 5.5 V, VCC = 5.5 V, IIL IOH VCC = 5.5 V, VCC = 4.5 V, ICC Ci SN54BCT760 TYP† MAX TEST CONDITIONS VCC = 5.5 V, VCC = 5 V, VCC = 5 V, MIN II = –18 mA IOL = 48 mA –1.2 0.38 IOL = 64 mA VI = 7 V VI = 2.7 V VI = 0.5 V VOH = 5.5 V SN74BCT760 TYP† MAX MIN –1.2 0.55 0.42 Outputs open 0.55 V 0.1 mA 20 20 µA –1 –1 mA 0.1 0.1 mA 21 33 21 33 Outputs low 48 76 48 76 OE disabled 6 10 6 10 Co † All typical values are at VCC = 5 V, TA = 25°C. V 0.1 Outputs high VI = 2.5 V or 0.5 V VI = 2.5 V or 0.5 V UNIT mA 6 6 pF 10 10 pF switching characteristics (see Note 2) PARAMETER FROM (INPUT) TO (OUTPUT) VCC = 5 V, CL = 50 pF, RL = 500 Ω, TA = 25°C VCC = 4.5 V to 5.5 V, CL = 50 pF, RL = 500 Ω, TA = MIN to MAX‡ ′BCT760 MIN tPLH tPHL Any A Y tPLH tPHL OE Y SN54BCT760 UNIT SN74BCT760 TYP MAX MIN MAX MIN MAX 6.3 8 9.5 6.3 11.1 6.3 10 2.1 4.3 6.5 2.1 7.7 2.1 7.2 8.6 13 15.2 8.6 18.7 8.6 17.5 3.2 6.2 8.9 3.2 10.4 3.2 9.9 ns ns ‡ For conditions shown as MIN or MAX, use the appropriate values specified under recommended operating conditions. NOTE 2: Load circuits and voltage waveforms are shown in Section 1. POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 2–3 SN54BCT760, SN74BCT760 OCTAL BUFFERS/DRIVERS WITH OPEN-COLLECTOR OUTPUTS SCBS034B – JULY 1989 – REVISED NOVEMBER 1993 2–4 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 PACKAGE OPTION ADDENDUM www.ti.com 14-Oct-2022 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Pins Package Drawing Qty Eco Plan (2) Lead finish/ Ball material MSL Peak Temp Op Temp (°C) Device Marking (3) Samples (4/5) (6) 5962-9093801M2A ACTIVE LCCC FK 20 1 Non-RoHS & Green SNPB N / A for Pkg Type -55 to 125 59629093801M2A SNJ54BCT 760FK 5962-9093801MRA ACTIVE CDIP J 20 1 Non-RoHS & Green SNPB N / A for Pkg Type -55 to 125 5962-9093801MR A SNJ54BCT760J 5962-9093801MSA ACTIVE CFP W 20 1 Non-RoHS & Green SNPB N / A for Pkg Type -55 to 125 5962-9093801MS A SNJ54BCT760W SN54BCT760J ACTIVE CDIP J 20 1 Non-RoHS & Green SNPB N / A for Pkg Type -55 to 125 SN54BCT760J Samples SN74BCT760DW ACTIVE SOIC DW 20 25 RoHS & Green NIPDAU Level-1-260C-UNLIM 0 to 70 BCT760 Samples SN74BCT760DWR ACTIVE SOIC DW 20 2000 RoHS & Green NIPDAU Level-1-260C-UNLIM 0 to 70 BCT760 Samples SN74BCT760N ACTIVE PDIP N 20 20 RoHS & Non-Green NIPDAU N / A for Pkg Type 0 to 70 SN74BCT760N Samples SNJ54BCT760FK ACTIVE LCCC FK 20 1 Non-RoHS & Green SNPB N / A for Pkg Type -55 to 125 59629093801M2A SNJ54BCT 760FK SNJ54BCT760J ACTIVE CDIP J 20 1 Non-RoHS & Green SNPB N / A for Pkg Type -55 to 125 5962-9093801MR A SNJ54BCT760J SNJ54BCT760W ACTIVE CFP W 20 1 Non-RoHS & Green SNPB N / A for Pkg Type -55 to 125 5962-9093801MS A SNJ54BCT760W (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. Addendum-Page 1 Samples Samples Samples Samples Samples Samples PACKAGE OPTION ADDENDUM www.ti.com 14-Oct-2022 (2) RoHS: TI defines "RoHS" to mean semiconductor products that are compliant with the current EU RoHS requirements for all 10 RoHS substances, including the requirement that RoHS substance do not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, "RoHS" products are suitable for use in specified lead-free processes. TI may reference these types of products as "Pb-Free". RoHS Exempt: TI defines "RoHS Exempt" to mean products that contain lead but are compliant with EU RoHS pursuant to a specific EU RoHS exemption. Green: TI defines "Green" to mean the content of Chlorine (Cl) and Bromine (Br) based flame retardants meet JS709B low halogen requirements of