0
登录后你可以
  • 下载海量资料
  • 学习在线课程
  • 观看技术视频
  • 写文章/发帖/加入社区
会员中心
创作中心
发布
  • 发文章

  • 发资料

  • 发帖

  • 提问

  • 发视频

创作活动
SN74CBT3345DBQRG4

SN74CBT3345DBQRG4

  • 厂商:

    BURR-BROWN(德州仪器)

  • 封装:

    SSOP20

  • 描述:

    IC BUS SWITCH 8 X 1:1 20SSOP

  • 数据手册
  • 价格&库存
SN74CBT3345DBQRG4 数据手册
       SCDS027I − MAY 1995 − REVISED JANUARY 2004 D Standard ’245-Type Pinout D 5-Ω Switch Connection Between Two Ports D TTL-Compatible Input Levels DB, DBQ, DGV, DW, OR PW PACKAGE (TOP VIEW) OE A1 A2 A3 A4 A5 A6 A7 A8 GND description/ordering information The SN74CBT3345 provides eight bits of high-speed TTL-compatible bus switching in a standard ’245 device pinout. The low on-state resistance of the switch allows connections to be made with minimal propagation delay. The device is organized as one 8-bit switch bank with dual output-enable (OE and OE) inputs. When OE is low or OE is high, the switch is on, and port A is connected to port B. When OE is high and OE is low, the switch is open, and the high-impedance state exists between the two ports. 1 20 2 19 3 18 4 17 5 16 6 15 7 14 8 13 9 12 10 11 VCC OE B1 B2 B3 B4 B5 B6 B7 B8 ORDERING INFORMATION TOP-SIDE MARKING Tube SN74CBT3345DW Tape and reel SN74CBT3345DWR SSOP − DB Tape and reel SN74CBT3345DBR CU345 SSOP (QSOP) − DBQ Tape and reel SN74CBT3345DBQR CBT3345 Tube SN74CBT3345PW Tape and reel SN74CBT3345PWR SOIC − DW −40°C −40 C to 85 85°C C ORDERABLE PART NUMBER PACKAGE† TA TSSOP − PW CBT3345 CU345 TVSOP − DGV Tape and reel SN74CBT3345DGVR CU345 † Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at www.ti.com/sc/package. FUNCTION TABLE INPUTS FUNCTION OE OE H X A port = B port X L A port = B port L H Disconnect Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. Copyright  2004, Texas Instruments Incorporated      !"#   $"%&! '#( '"! !  $#!! $# )# #  #* "# '' +,( '"! $!#- '#  #!#&, !&"'# #-  && $##( POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 1        SCDS027I − MAY 1995 − REVISED JANUARY 2004 logic diagram (positive logic) 2 18 A1 A8 B1 9 11 B8 1 OE 19 OE absolute maximum ratings over operating free-air temperature range (unless otherwise noted)† Supply voltage range, VCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −0.5 V to 7 V Input voltage range, VI (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −0.5 V to 7 V Continuous channel current . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128 mA Input clamp current, IIK (VI/O < 0) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −50 mA Package thermal impedance, θJA (see Note 2): DB package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70°C DBQ package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68°C DGV package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92°C DW package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58°C PW package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83°C Storage temperature range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −65°C to 150°C † Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. NOTES: 1. The input and output negative-voltage ratings may be exceeded if the input and output clamp-current ratings are observed. 2. The package thermal impedance is calculated in accordance with JESD 51-7. recommended operating conditions (see Note 3) VCC VIH Supply voltage VIL TA Low-level control input voltage High-level control input voltage MIN MAX 4.5 5.5 2 Operating free-air temperature −40 UNIT V V 0.8 V 85 °C NOTE 3: All unused control inputs of the device must be held at VCC or GND to ensure proper device operation. Refer to the TI application report, Implications of Slow or Floating CMOS Inputs, literature number SCBA004. 2 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265        SCDS027I − MAY 1995 − REVISED JANUARY 2004 electrical characteristics over recommended operating free-air temperature range (unless otherwise noted) PARAMETER VIK II TEST CONDITIONS VCC = 4.5 V, VCC = 5.5 V, II = −18 mA VI = 5.5 V or GND VCC = 5.5 V, VCC = 5.5 V, IO = 0, One input at 3.4 V, Cio(OFF) VI = 3 V or 0 VO = 3 V or 0, OE = VCC or OE = GND ron§ VCC = 4.5 V All inputs ICC ∆ICC‡ Control inputs Ci Control inputs MIN TYP† VI = VCC or GND Other inputs at VCC or GND MAX UNIT −1.2 V ±1 µA 50 µA 3.5 mA 3 pF 6 pF II = 64 mA II = 30 mA 5 VI = 0 5 7 7 VI = 2.4 V, II = 15 mA 10 15 Ω † All typical values are at VCC = 5 V, TA = 25°C. ‡ This is the increase in supply current for each input that is at the specified TTL voltage level, rather than VCC or GND. § Measured by the voltage drop between the A and B terminals at the indicated current through the switch. On-state resistance is determined by the lower of the voltages of the two (A or B) terminals. switching characteristics over recommended operating free-air temperature range, CL = 50 pF (unless otherwise noted) (see Figure 1) PARAMETER tpd¶ ten FROM (INPUT) TO (OUTPUT) A or B B or A OE or OE A or B VCC = 5 V ± 0.5 V MIN 1 UNIT MAX 0.25 ns 9.1 ns tdis A or B 1 8.7 ns OE or OE ¶ The propagation delay is the calculated RC time constant of the typical on-state resistance of the switch and the specified load capacitance, when driven by an ideal voltage source (zero output impedance). POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 3        SCDS027I − MAY 1995 − REVISED JANUARY 2004 PARAMETER MEASUREMENT INFORMATION 7V 500 Ω From Output Under Test S1 Open GND CL = 50 pF (see Note A) 500 Ω TEST S1 tpd tPLZ/tPZL tPHZ/tPZH Open 7V Open 3V Output Control LOAD CIRCUIT 1.5 V 1.5 V 0V tPZL 3V Input 1.5 V 1.5 V 0V tPLH 1.5 V 3.5 V 1.5 V tPZH tPHL VOH Output Output Waveform 1 S1 at 7 V (see Note B) tPLZ 1.5 V VOL Output Waveform 2 S1 at Open (see Note B) VOLTAGE WAVEFORMS PROPAGATION DELAY TIMES VOL + 0.3 V VOL tPHZ 1.5 V VOH VOH − 0.3 V 0V VOLTAGE WAVEFORMS ENABLE AND DISABLE TIMES NOTES: A. CL includes probe and jig capacitance. B. Waveform 1 is for an output with internal conditions such that the output is low except when disabled by the output control. Waveform 2 is for an output with internal conditions such that the output is high except when disabled by the output control. C. All input pulses are supplied by generators having the following characteristics: PRR ≤ 10 MHz, ZO = 50 Ω, tr ≤ 2.5 ns, tf ≤ 2.5 ns. D. The outputs are measured one at a time with one transition per measurement. E. tPLZ and tPHZ are the same as tdis. F. tPZL and tPZH are the same as ten. G. tPLH and tPHL are the same as tpd. Figure 1. Load Circuit and Voltage Waveforms 4 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 PACKAGE OPTION ADDENDUM www.ti.com 10-Dec-2020 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Pins Package Drawing Qty Eco Plan (2) Lead finish/ Ball material MSL Peak Temp Op Temp (°C) Device Marking (3) (4/5) (6) SN74CBT3345DGVR ACTIVE TVSOP DGV 20 2000 RoHS & Green NIPDAU Level-1-260C-UNLIM -40 to 85 CU345 SN74CBT3345DW ACTIVE SOIC DW 20 25 RoHS & Green NIPDAU Level-1-260C-UNLIM -40 to 85 CBT3345 SN74CBT3345DWR ACTIVE SOIC DW 20 2000 RoHS & Green NIPDAU Level-1-260C-UNLIM -40 to 85 CBT3345 SN74CBT3345PW ACTIVE TSSOP PW 20 70 RoHS & Green NIPDAU Level-1-260C-UNLIM -40 to 85 CU345 SN74CBT3345PWR ACTIVE TSSOP PW 20 2000 RoHS & Green NIPDAU Level-1-260C-UNLIM -40 to 85 CU345 (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) RoHS: TI defines "RoHS" to mean semiconductor products that are compliant with the current EU RoHS requirements for all 10 RoHS substances, including the requirement that RoHS substance do not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, "RoHS" products are suitable for use in specified lead-free processes. TI may reference these types of products as "Pb-Free". RoHS Exempt: TI defines "RoHS Exempt" to mean products that contain lead but are compliant with EU RoHS pursuant to a specific EU RoHS exemption. Green: TI defines "Green" to mean the content of Chlorine (Cl) and Bromine (Br) based flame retardants meet JS709B low halogen requirements of
SN74CBT3345DBQRG4 价格&库存

很抱歉,暂时无法提供与“SN74CBT3345DBQRG4”相匹配的价格&库存,您可以联系我们找货

免费人工找货