SN74HCU7204PWR

SN74HCU7204 DUAL INVERTERS www.ti.com SCLS700 – MAY 2006 FEATURES • • • • • • • Wide Operating Voltage Range of 2 V to 6 V Outputs Can Drive up to 10 LSTTL Loads Low Power Consumption, 20-µA Max ICC Typical tpd = 7 ns ±4-mA Output Drive at 5 V Low Input Current of 1 µA Max Unbuffered Outputs PS OR PW PACKAGE (TOP VIEW) NC 1 8 VCC 1A 2 7 2A 1Y 3 6 2Y GND 4 5 NC DESCRIPTION/ORDERING INFORMATION The SN74HCU7204 contains two independent unbuffered inverters. The device performs the Boolean function Y = A in positive logic. ORDERING INFORMATION PACKAGE (1) TA SOP – PS –40°C to 85°C TSSOP – PW (1) ORDERABLE PART NUMBER SN74HCU7204PS Reel of 2000 SN74HCU7204PSR Tube of 90 SN74HCU7204PW Reel of 2000 SN74HCU7204PWR Reel of 250 SN74HCU7204PWT TOP-SIDE MARKING HU7204 HU7204 Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at www.ti.com/sc/package. FUNCTION TABLE (EACH INVERTER) INPUT A OUTPUT Y H L L H LOGIC DIAGRAM (POSITIVE LOGIC) A Y Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of the Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. Copyright © 2006, Texas Instruments Incorporated SN74HCU7204 DUAL INVERTERS www.ti.com SCLS700 – MAY 2006 Absolute Maximum Ratings (1) over operating free-air temperature range (unless otherwise noted) MIN MAX –0.5 7 UNIT VCC Supply voltage range IIK Input clamp current (2) VI < 0 or VI > VCC ±20 mA IOK Output clamp current (2) VO < 0 or VO > VCC ±20 mA IO Continuous output current VO = 0 to VCC ±25 mA ±50 mA Continuous current through VCC or GND θJA Package thermal impedance (3) Tstg Storage temperature range (1) (2) (3) PS package TBD PW package TBD –65 V °C/W °C 150 Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. The input and output voltage ratings may be exceeded if the input and output current ratings are observed. The package thermal impedance is calculated in accordance with JESD 51-7. Recommended Operating Conditions (1) MIN NOM MAX VCC Supply voltage VIH High-level input voltage VIL VI Input voltage VO Output voltage IOH High-level output current IOL Low-level output current tt TA (1) 2 Low-level input voltage Transition time 2 VCC = 2 V 1.7 VCC = 4.5 V 3.6 VCC = 6 V 4.8 5 0.3 VCC = 4.5 V 0.8 VCC = 6 V 1.1 0 0 V VCC V mA –5.2 VCC = 4.5 V 4 VCC = 6 V mA 5.2 VCC = 2 V 0 1000 VCC = 4.5 V 0 500 VCC = 6 V 0 400 –40 85 Operating free-air temperature All unused inputs of the device must be held at VCC or GND to ensure proper device operation. Refer to the TI application report, Implications of Slow or Floating CMOS Inputs, literature number SCBA004. Submit Documentation Feedback V VCC –4 VCC = 6 V V V VCC = 2 V VCC = 4.5 V UNIT 6 ns °C SN74HCU7204 DUAL INVERTERS www.ti.com SCLS700 – MAY 2006 Electrical Characteristics over recommended operating free-air temperature range (unless otherwise noted) PARAMETER TEST CONDITIONS TA = 25°C VCC MIN 2V IOH = –20 µA VOH IOH = –4 mA IOH = –5.2 mA VOL ICC VI = VCC or 0, 4 4 6V 5.5 5.5 4.5 V 3.86 3.76 6V 5.36 V 5.26 0.2 IOL = 20 µA 4.5 V 0.5 0.5 6V 0.5 0.5 IOL = 4 mA 4.5 V 0.32 0.37 IO = 0 V 6V 0.32 0.37 6V ±100 ±1000 nA 2 20 µA 10 10 pF 6V Ci UNIT 1.8 0.2 IOL = 5.2 mA VI = VCC or 0 MAX 2V VI = VCC or GND II 1.8 4.5 V VI = VCC or GND MIN TYP MAX 2 V to 6 V 3 Switching Characteristics over recommended operating free-air temperature range, CL = 50 pF (unless otherwise noted) (see Figure 1) TA = 25°C PARAMETER FROM (INPUT) TO (OUTPUT) VCC 2V 40 80 100 tpd A Y 4.5 V 8 16 20 6V 7 14 17 2V 38 75 95 4.5 V 8 15 19 6V 6 13 16 tr/tf Y MIN TYP MAX MIN MAX UNIT ns ns Operating Characteristics TA = 25°C PARAMETER Cpd TEST CONDITIONS Power dissipation capacitance per inverter No load Submit Documentation Feedback TYP 20 UNIT pF 3 SN74HCU7204 DUAL INVERTERS www.ti.com SCLS700 – MAY 2006 PARAMETER MEASUREMENT INFORMATION From Output Under Test Test Point Input CL = 50 pF (see Note A) VCC 50% 50% 0V tPLH In-Phase Output LOAD CIRCUIT tPHL 90% 50% 10% 90% tr tPHL Input 50% 10% 90% 90% tr VCC 50% 10% 0 V Out-of-Phase Output 90% tPLH 50% 10% tf tf VOLTAGE WAVEFORM INPUT RISE AND FALL TIMES VOH 50% 10% VOL tf 50% 10% 90% VOH VOL tr VOLTAGE WAVEFORMS PROPAGATION DELAY AND OUTPUT TRANSITION TIMES NOTES: A. CL includes probe and test-fixture capacitance. B. Phase relationships between waveforms were chosen arbitrarily. All input pulses are supplied by generators having the following characteristics: PRR ≤ 1 MHz, ZO = 50 Ω, tr = 6 ns, tf = 6 ns. C. The outputs are measured one at a time, with one input transition per measurement. D. tPLH and tPHL are the same as tpd. Figure 1. Load Circuit and Voltage Waveforms 4 Submit Documentation Feedback PACKAGE OPTION ADDENDUM www.ti.com 10-Dec-2020 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Pins Package Drawing Qty Eco Plan (2) Lead finish/ Ball material MSL Peak Temp Op Temp (°C) Device Marking (3) (4/5) (6) SN74HCU7204PW ACTIVE TSSOP PW 8 150 RoHS & Green NIPDAU Level-1-260C-UNLIM HU7204 (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) RoHS: TI defines "RoHS" to mean semiconductor products that are compliant with the current EU RoHS requirements for all 10 RoHS substances, including the requirement that RoHS substance do not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, "RoHS" products are suitable for use in specified lead-free processes. TI may reference these types of products as "Pb-Free". RoHS Exempt: TI defines "RoHS Exempt" to mean products that contain lead but are compliant with EU RoHS pursuant to a specific EU RoHS exemption. Green: TI defines "Green" to mean the content of Chlorine (Cl) and Bromine (Br) based flame retardants meet JS709B low halogen requirements of