TL022CPSR

TL022C, TL022M DUAL LOW-POWER OPERATIONAL AMPLIFIERS SLOS076 – SEPTEMBER 1973 – REVISED SEPTEMBER 1990 1OUT 1IN – 1IN + GND 1 8 2 7 3 6 4 5 VCC 2OUT 2IN – 2IN + TL022M . . . U PACKAGE (TOP VIEW) NC 1OUT 1IN – 1IN + VCC – TL022M IS NOT RECOMMENDED FOR NEW DESIGNS description The TL022 is a dual low-power operational amplifier designed to replace higher power devices in many applications without sacrificing system performance. High input impedance, low supply currents, and low equivalent input noise voltage over a wide range of operating supply voltages result in an extremely versatile operational amplifier for use in a variety of analog applications including battery-operated circuits. Internal frequency compensation, absence of latch-up, high slew rate, and output short-circuit protection assure ease of use. 1 10 2 9 3 8 4 7 5 6 NC VCC + 2OUT 2IN – 2IN + symbol (each amplifier) IN + OUT – D D D D D D TL022M . . . JG PACKAGE TL022C . . . D OR P PACKAGE (TOP VIEW) Very Low Power Consumption Power Dissipation With ± 2-V Supplies 170 µW Typ Low Input Bias and Offset Currents Output Short-Circuit Protection Low Input Offset Voltage Internal Frequency Compensation Latch-Up-Free Operation Popular Dual Operational Amplifier Pinout + D D IN – The TL022C is characterized for operation from 0°C to 70°C. The TL022M is characterized for operation over the full military temperature range of – 55°C to 125°C. AVAILABLE OPTIONS TA VIOmax AT 25°C 25 C 0°C to 70°C – 55°C to 125°C PACKAGE SMALL OUTLINE (D) CERAMIC DIP (JG) PLASTIC DIP (P) CERAMIC FLAT PACK (U) 5 mV TL022CD — TL022CP — 5 mV — TL022MJG — TL022MU The D package is available taped and reeled. Add the suffix R to the device type (i.e. TL022CDR). Copyright  1990, Texas Instruments Incorporated PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 1 TL022C, TL022M DUAL LOW-POWER OPERATIONAL AMPLIFIERS SLOS076 – SEPTEMBER 1973 – REVISED SEPTEMBER 1990 schematic OUT Common to Both Amplifiers Each Amplifier VCC + To Other Amplifier IN – IN + VCC – To Other Amplifier absolute maximum ratings over operating free-air temperature range (unless otherwise noted) TL022C TL022M UNIT Supply voltage, VCC+ (see Note 1) 18 22 V Supply voltage, VCC– (see Note 1) – 18 – 22 V Differential input voltage (see Note 2) ± 30 ± 30 V Input voltage (any input, see Notes 1 and 3) ± 15 ± 15 V Duration of output short circuit (see Note 4) unlimited unlimited Continuous total dissipation See Dissipation Rating Table 0 to 70 – 55 to 125 °C – 65 to 150 – 65 to 150 °C 300 °C Operating free-air temperature range Storage temperature range Lead temperature 1,6 mm (1/16 inch) from case for 60 seconds JG or U package Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds D or P package NOTES: 1. 2. 3. 4. °C 260 All voltage values, unless otherwise noted, are with respect to the midpoint between VCC+ and VCC– . Differential voltages are at IN+ with respect to IN –. The magnitude of the input voltage must never exceed the magnitude of the supply voltage or 15 V, whichever is less. The output may be shorted to ground or either power supply. For the TL022M only, the unlimited duration of the short circuit applies at (or below) 125°C case temperature or 75°C free-air temperature. DISSIPATION RATING TABLE 2 PACKAGE TA ≤ 25°C POWER RATING DERATING FACTOR DERATE ABOVE TA TA = 70°C POWER RATING TA = 125°C POWER RATING D 680 mW 5.8 mW/°C 33°C 464 mW — JG 680 mW 8.4 mW/°C 69°C 672 mW 210 mW P 680 mW 8.0 mW/°C 65°C 640 mW — U 675 mW 5.4 mW/°C 25°C 432 mW 135 mW POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 TL022C, TL022M DUAL LOW-POWER OPERATIONAL AMPLIFIERS SLOS076 – SEPTEMBER 1973 – REVISED SEPTEMBER 1990 recommended operating conditions MIN MAX Supply voltage, VCC + 5 15 UNIT V Supply voltage, VCC – –5 – 15 V electrical characteristics at specified free-air temperature, VCC ± = ±15 V (unless otherwise noted) TL022C TEST CONDITIONS† PARAMETER MIN 25°C TYP 1 VIO Input offset voltage VO = 0,, RS = 50 Ω IIO Input offset current VO = 0 IIB Input bias current VO = 0 VICR Common-mode input voltage range VO(PP) Maximum peak-to-peak output voltage swing RL = 10 kΩ 25°C 20 RL ≥ 10 kΩ Full range 20 AVD Large-signal g g differehtial voltage amplification RL ≥ 10 kΩ,, VO = ± 10 V 25°C 60 Full range 60 B1 Unity-gain bandwidth 25°C CMRR Common-mode rejection j ratio VIC = VICRmin,, RS = 50 Ω 25°C 60 Full range 60 kSVS Supply y voltage g sensitivity y (∆VIO /∆VCC) VCC = ± 9 V to ± 15 V,, RS = 50 Ω Vn Equivalent E i l t input i t noise i voltage AVD = 20 dB, dB B = 1 Hz, Hz IOS Short-circuit output current 25°C ±6 ICC Supply y current ((both amplifiers) VO = 0 0, No load 25°C 130 PD Total dissipation (both amplifiers) VO = 0, 0 No load Full range MIN 5 TYP MAX 1 5 7.5 25°C 15 Full range 6 80 5 200 25°C 100 Full range 25°C ± 12 ± 12 250 ± 13 50 ± 12 26 20 80 72 25°C 26 86 200 30 200 dB 50 130 mA 250 250 7.5 3.9 7.5 µV/V nV/Hz ±6 250 250 3.9 150 150 50 nA MHz 72 60 30 nA dB 0.5 60 mV V 66 72 UNIT V 20 Full range Full range ± 13 ± 12 Full range 25°C 100 250 0.5 25°C 40 100 400 Full range f = 1 kHz TL022M MAX 6 6 µA mW † All characteristics are measured under open-loop conditions with zero common-mode input voltage unless otherwise specified. Full range for TL022C is 0°C to 70°C and for TL022M is – 55°C to 125°C. operating characteristics, VCC± = ±15 V, TA = 25°C PARAMETER tr Rise time Overshoot factor SR Slew rate at unity gain TEST CONDITIONS MIN VI = 20 mV, mV RL = 10 kΩ kΩ, CL= 100 pF, pF See Figure 1 VI = 10 V, RL = 10 kΩ, CL= 100 pF, See Figure 1 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 TYP 0.3 MAX UNIT µs 5% 0.5 V/µs 3 TL022C, TL022M DUAL LOW-POWER OPERATIONAL AMPLIFIERS SLOS076 – SEPTEMBER 1973 – REVISED SEPTEMBER 1990 PARAMETER MEASUREMENT INFORMATION Output – VI Input + 0V INPUT VOLTAGE WAVEFORM CL = 100 pF RL = 2 kΩ TEST CIRCUIT Figure 1. Rise Time, Overshoot Factor, and Slew Rate TYPICAL CHARACTERISTICS TOTAL POWER DISSIPATION vs SUPPLY RATE – Total Power Dissipation – mW PPD D 10 No Load No Signal TA = 25°C 7 4 2 1 0.7 0.4 0.2 0.1 0 2 4 6 8 10 12 14 16 |VCC ± | – Supply Voltage – V Figure 2 4 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 18 20 PACKAGE OPTION ADDENDUM www.ti.com 13-Aug-2021 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Pins Package Drawing Qty Eco Plan (2) Lead finish/ Ball material MSL Peak Temp Op Temp (°C) Device Marking (3) (4/5) (6) TL022CD ACTIVE SOIC D 8 75 RoHS & Green NIPDAU Level-1-260C-UNLIM 0 to 70 TL022C TL022CDR ACTIVE SOIC D 8 2500 RoHS & Green NIPDAU Level-1-260C-UNLIM 0 to 70 TL022C TL022CDR ACTIVE SOIC D 8 2500 RoHS & Green NIPDAU Level-1-260C-UNLIM 0 to 70 TL022C TL022CDR ACTIVE SOIC D 8 2500 RoHS & Green NIPDAU Level-1-260C-UNLIM 0 to 70 TL022C TL022CDRG4 ACTIVE SOIC D 8 2500 RoHS & Green NIPDAU Level-1-260C-UNLIM 0 to 70 TL022C TL022CDRG4 ACTIVE SOIC D 8 2500 RoHS & Green NIPDAU Level-1-260C-UNLIM 0 to 70 TL022C TL022CDRG4 ACTIVE SOIC D 8 2500 RoHS & Green NIPDAU Level-1-260C-UNLIM 0 to 70 TL022C TL022CP ACTIVE PDIP P 8 50 RoHS & Green NIPDAU N / A for Pkg Type 0 to 70 TL022CP TL022CP ACTIVE PDIP P 8 50 RoHS & Green NIPDAU N / A for Pkg Type 0 to 70 TL022CP TL022CP ACTIVE PDIP P 8 50 RoHS & Green NIPDAU N / A for Pkg Type 0 to 70 TL022CP TL022CPSR ACTIVE SO PS 8 2000 RoHS & Green NIPDAU Level-1-260C-UNLIM 0 to 70 T022 TL022CPSR ACTIVE SO PS 8 2000 RoHS & Green NIPDAU Level-1-260C-UNLIM 0 to 70 T022 TL022CPSR ACTIVE SO PS 8 2000 RoHS & Green NIPDAU Level-1-260C-UNLIM 0 to 70 T022 TL022CPSRG4 ACTIVE SO PS 8 2000 RoHS & Green NIPDAU Level-1-260C-UNLIM 0 to 70 T022 TL022CPSRG4 ACTIVE SO PS 8 2000 RoHS & Green NIPDAU Level-1-260C-UNLIM 0 to 70 T022 TL022CPSRG4 ACTIVE SO PS 8 2000 RoHS & Green NIPDAU Level-1-260C-UNLIM 0 to 70 T022 (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. Addendum-Page 1 Samples PACKAGE OPTION ADDENDUM www.ti.com 13-Aug-2021 (2) RoHS: TI defines "RoHS" to mean semiconductor products that are compliant with the current EU RoHS requirements for all 10 RoHS substances, including the requirement that RoHS substance do not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, "RoHS" products are suitable for use in specified lead-free processes. TI may reference these types of products as "Pb-Free". RoHS Exempt: TI defines "RoHS Exempt" to mean products that contain lead but are compliant with EU RoHS pursuant to a specific EU RoHS exemption. Green: TI defines "Green" to mean the content of Chlorine (Cl) and Bromine (Br) based flame retardants meet JS709B low halogen requirements of