TLV1549C, TLV1549I, TLV1549M
10-BIT ANALOG-TO-DIGITAL CONVERTERS
WITH SERIAL CONTROL
SLAS071C – JANUARY 1993 – REVISED MARCH 1995
3.3-V Supply Operation
10-Bit-Resolution Analog-to-Digital
Converter (ADC)
Inherent Sample and Hold Function
Total Unadjusted Error . . . ± 1 LSB Max
On-Chip System Clock
Terminal Compatible With TLC1549 and
TLC1549x
Application Report Available†
CMOS Technology
D, JG, OR P PACKAGE
(TOP VIEW)
REF +
ANALOG IN
REF –
GND
1
8
2
7
3
6
4
5
VCC
I/O CLOCK
DATA OUT
CS
NC
REF+
NC
VCC
NC
FK PACKAGE
(TOP VIEW)
description
NC
ANALOG IN
NC
REF–
NC
4
3 2 1 20 19
18
5
17
6
16
7
15
8
14
9 10 11 12 13
NC
I/O CLOCK
NC
DATA OUT
NC
NC
GND
NC
CS
NC
The TLV1549C, TLV1549I, and TLV1549M are
10-bit,
switched-capacitor,
successiveapproximation, analog-to-digital converters. The
devices have two digital inputs and a 3-state
output [chip select (CS), input-output clock (I/O
CLOCK), and data output (DATA OUT)] that
provide a three-wire interface to the serial port of
a host processor.
The sample-and-hold function is automatic. The
converter incorporated in the device features
differential high-impedance reference inputs that
facilitate ratiometric conversion, scaling, and
isolation of analog circuitry from logic and supply
noise. A switched-capacitor design allows lowerror conversion over the full operating free-air
temperature range.
NC – No internal connection
The TLV1549C is characterized for operation from 0°C to 70°C. The TLV1549I is characterized for operation
from – 40°C to 85°C. The TLV1549M is characterized for operation over the full military temperature range of
– 55°C to 125°C.
AVAILABLE OPTIONS
PACKAGE
TA
SMALL OUTLINE
(D)
0°C to 70°C
TLV1549CD
– 40°C to 85°C
TLV1549ID
– 55°C to 125°C
—
CHIP CARRIER
(FK)
CERAMIC DIP
(JG)
PLASTIC DIP
(P)
—
TLV1549CP
—
TLV1549IP
TLV1549MJG
—
—
—
TLV1549MFK
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
† Interfacing the TLV1549 10-Bit Serial-Out ADC to Popular 3.3-V Microcontrollers (SLAA005)
Copyright © 1995, Texas Instruments Incorporated
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
1
TLV1549C, TLV1549I, TLV1549M
10-BIT ANALOG-TO-DIGITAL CONVERTERS
WITH SERIAL CONTROL
SLAS071C – JANUARY 1993 – REVISED MARCH 1995
typical equivalent inputs
INPUT CIRCUIT IMPEDANCE DURING SAMPLING MODE
INPUT CIRCUIT IMPEDANCE DURING HOLD MODE
1 kΩ TYP
ANALOG IN
ANALOG IN
Ci = 60 pF TYP
(equivalent input
capacitance)
5 MΩ TYP
functional block diagram
REF +
1
REF –
3
10-Bit
Analog-to-Digital
Converter
(switched capacitors)
10
ANALOG IN
2
Sample and
Hold
Output
Data
Register
10
10-to-1 Data
Selector and
Driver
4
System Clock,
Control Logic,
and I/O
Counters
I/O CLOCK
CS
7
5
Terminal numbers shown are for the D, JG, and P packages only.
2
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
6
DATA OUT
TLV1549C, TLV1549I, TLV1549M
10-BIT ANALOG-TO-DIGITAL CONVERTERS
WITH SERIAL CONTROL
SLAS071C – JANUARY 1993 – REVISED MARCH 1995
Terminal Functions
TERMINAL
I/O
DESCRIPTION
2
I
Analog input. The driving source impedance should be ≤ 1 kΩ. The external driving source to ANALOG IN should
have a current capability ≥ 10 mA.
CS
5
I
Chip select. A high-to-low transition on CS resets the internal counters and controls and enables DATA OUT and
I/O CLOCK within a maximum of a setup time plus two falling edges of the internal system clock. A low-to-high
transition disables I/O CLOCK within a setup time plus two falling edges of the internal system clock.
DATA OUT
6
O
This 3-state serial output for the A/D conversion result is in the high-impedance state when CS is high and active
when CS is low. With a valid chip select, DATA OUT is removed from the high-impedance state and is driven to
the logic level corresponding to the MSB value of the previous conversion result. The next falling edge of I/O
CLOCK drives DATA OUT to the logic level corresponding to the next most significant bit, and the remaining bits
are shifted out in order with the LSB appearing on the ninth falling edge of I/O CLOCK. On the tenth falling edge
of I/O CLOCK, DATA OUT is driven to a low logic level so that serial interface data transfers of more than ten clocks
produce zeroes as the unused LSBs.
GND
4
I
The ground return for internal circuitry. Unless otherwise noted, all voltage measurements are with respect to GND.
I/O CLOCK
7
I
The input /output clock receives the serial I/O CLOCK input and performs the following three functions:
1) On the third falling edge of I/O CLOCK, the analog input voltage begins charging the capacitor array and
continues to do so until the tenth falling edge of I/O CLOCK.
2) It shifts the nine remaining bits of the previous conversion data out on DATA OUT.
3) It transfers control of the conversion to the internal state controller on the falling edge of the tenth clock.
REF +
1
I
The upper reference voltage value (nominally VCC) is applied to REF +. The maximum input voltage range is
determined by the difference between the voltage applied to REF + and the voltage applied to REF –.
REF –
3
I
The lower reference voltage value (nominally ground) is applied to this REF –.
VCC
8
I
Positive supply voltage
NAME
NO.
ANALOG IN
detailed description
With chip select (CS) inactive (high), the I/O CLOCK input is initially disabled and DATA OUT is in the highimpedance state. When the serial interface takes CS active (low), the conversion sequence begins with the
enabling of I/O CLOCK and the removal of DATA OUT from the high-impedance state. The serial interface then
provides the I/O CLOCK sequence to I/O CLOCK and receives the previous conversion result from DATA OUT.
I/O CLOCK receives an input sequence that is between 10 and 16 clocks long from the host serial interface.
The first ten I/O clocks provide the control timing for sampling the analog input.
There are six basic serial interface timing modes that can be used with the TLV1549. These modes are
determined by the speed of I/O CLOCK and the operation of CS as shown in Table 1. These modes are:
(1) a fast mode with a 10-clock transfer and CS inactive (high) between transfers, (2) a fast mode with a 10-clock
transfer and CS active (low) continuously, (3) a fast mode with an 11- to 16-clock transfer and CS inactive (high)
between transfers, (4) a fast mode with a 16-bit transfer and CS active (low) continuously, (5) a slow mode with
an 11- to 16-clock transfer and CS inactive (high) between transfers, and (6) a slow mode with a 16-clock transfer
and CS active (low) continuously.
The MSB of the previous conversion appears on DATA OUT on the falling edge of CS in mode 1, mode 3, and
mode 5, within 21 μs from the falling edge of the tenth I/O CLOCK in mode 2 and mode 4, and following the
16th clock falling edge in mode 6. The remaining nine bits are shifted out on the next nine falling edges of the
I/O CLOCK. Ten bits of data are transmitted to the host serial interface through DATA OUT. The number of serial
clock pulses used also depends on the mode of operation, but a minimum of ten clock pulses is required for
conversion to begin. On the tenth clock falling edge, the internal logic takes DATA OUT low to ensure that the
remaining bit values are zero if the I/O CLOCK transfer is more than ten clocks long.
Table 1 lists the operational modes with respect to the state of CS, the number of I/O serial transfer clocks that
can be used, and the timing on which the MSB of the previous conversion appears at the output.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
3
TLV1549C, TLV1549I, TLV1549M
10-BIT ANALOG-TO-DIGITAL CONVERTERS
WITH SERIAL CONTROL
SLAS071C – JANUARY 1993 – REVISED MARCH 1995
Table 1. Mode Operation
MODES
Fast Modes
Slow Modes
NO. OF
I/O CLOCKS
CS
MSB AT DATA OUT†
TIMING
DIAGRAM
Mode 1
High between conversion cycles
10
CS falling edge
Figure 6
Mode 2
Low continuously
10
Within 21 μs
Figure 7
CS falling edge
Figure 8
Mode 3
High between conversion cycles
Mode 4
Low continuously
Mode 5
High between conversion cycles
Mode 6 Low continuously
† This timing also initiates serial-interface communication.
‡ No more than 16 clocks should be used.
11 to 16‡
16‡
11 to 16‡
16‡
Within 21 μs
Figure 9
CS falling edge
Figure 10
16th clock falling edge
Figure 11
All the modes require a minimum period of 21 μs after the falling edge of the tenth I/O CLOCK before a new
transfer sequence can begin. During a serial I/O CLOCK data transfer, CS must be active (low) so that the I/O
CLOCK input is enabled. When CS is toggled between data transfers (modes 1, 3, and 5), the transitions at CS
are recognized as valid only if the level is maintained for a minimum period of 1.425 μs after the transition. If
the transfer is more than ten I/O clocks (modes 3, 4, 5, and 6), the rising edge of the eleventh clock must occur
within 9.5 μs after the falling edge of the tenth I/O CLOCK; otherwise, the device could lose synchronization with
the host serial interface and CS has to be toggled to restore proper operation.
fast modes
The device is in a fast mode when the serial I/O CLOCK data transfer is completed within 21 μs from the falling
edge of the tenth I/O CLOCK. With a 10-clock serial transfer, the device can only run in a fast mode.
mode 1: fast mode, CS inactive (high) between transfers, 10-clock transfer
In this mode, CS is inactive (high) between serial I/O-CLOCK transfers and each transfer is ten clocks long. The
falling edge of CS begins the sequence by removing DATA OUT from the high-impedance state. The rising edge
of CS ends the sequence by returning DATA OUT to the high-impedance state within the specified delay time.
Also, the rising edge of CS disables I/O CLOCK within a setup time plus two falling edges of the internal system
clock.
mode 2: fast mode, CS active (low) continuously, 10-clock transfer
In this mode, CS is active (low) between serial I/O-CLOCK transfers and each transfer is ten clocks long. After
the initial conversion cycle, CS is held active (low) for subsequent conversions. Within 21 μs after the falling
edge of the tenth I/O CLOCK, the MSB of the previous conversion appears at DATA OUT.
mode 3: fast mode, CS inactive (high) between transfers, 11- to 16-clock transfer
In this mode, CS is inactive (high) between serial I/O-CLOCK transfers and each transfer can be 11 to 16 clocks
long. The falling edge of CS begins the sequence by removing DATA OUT from the high-impedance state. The
rising edge of CS ends the sequence by returning DATA OUT to the high-impedance state within the specified
delay time. Also, the rising edge of CS disables I/O CLOCK within a setup time plus two falling edges of the
internal system clock.
mode 4: fast mode, CS active (low) continuously, 16-clock transfer
In this mode, CS is active (low) between serial I/O-CLOCK transfers and each transfer must be exactly 16 clocks
long. After the initial conversion cycle, CS is held active (low) for subsequent conversions. Within 21 μs after
the falling edge of the tenth I/O CLOCK, the MSB of the previous conversion appears at DATA OUT.
slow modes
In a slow mode, the serial I/O CLOCK data transfer is completed after 21 μs from the falling edge of the tenth
I/O CLOCK.
4
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
TLV1549C, TLV1549I, TLV1549M
10-BIT ANALOG-TO-DIGITAL CONVERTERS
WITH SERIAL CONTROL
SLAS071C – JANUARY 1993 – REVISED MARCH 1995
mode 5: slow mode, CS inactive (high) between transfers, 11- to 16-clock transfer
In this mode, CS is inactive (high) between serial I/O-CLOCK transfers and each transfer can be 11 to 16 clocks
long. The falling edge of CS begins the sequence by removing DATA OUT from the high-impedance state. The
rising edge of CS ends the sequence by returning DATA OUT to the high-impedance state within the specified
delay time. Also, the rising edge of CS disables I/O CLOCK within a setup time plus two falling edges of the
internal system clock.
mode 6: slow mode, CS active (low) continuously, 16-clock transfer
In this mode, CS is active (low) between serial I/O-CLOCK transfers and each transfer must be exactly 16 clocks
long. After the initial conversion cycle, CS is held active (low) for subsequent conversions. The falling edge of
the sixteenth I/O CLOCK then begins each sequence by removing DATA OUT from the low state, allowing the
MSB of the previous conversion to appear immediately at DATA OUT. The device is then ready for the next
16-clock transfer initiated by the serial interface.
analog input sampling
Sampling of the analog input starts on the falling edge of the third I/O CLOCK, and sampling continues for seven
I/O CLOCK periods. The sample is held on the falling edge of the tenth I/O CLOCK.
converter and analog input
The CMOS threshold detector in the successive-approximation conversion system determines each bit by
examining the charge on a series of binary-weighted capacitors (see Figure 1). In the first phase of the
conversion process, the analog input is sampled by closing the SC switch and all ST switches simultaneously.
This action charges all the capacitors to the input voltage.
In the next phase of the conversion process, all ST and SC switches are opened and the threshold detector
begins identifying bits by identifying the charge (voltage) on each capacitor relative to the reference (REF –)
voltage. In the switching sequence, ten capacitors are examined separately until all ten bits are identified and
then the charge-convert sequence is repeated. In the first step of the conversion phase, the threshold detector
looks at the first capacitor (weight = 512). Node 512 of this capacitor is switched to the REF+ voltage, and the
equivalent nodes of all the other capacitors on the ladder are switched to REF –. If the voltage at the summing
node is greater than the trip point of the threshold detector (approximately one-half VCC ), a bit 0 is placed in
the output register and the 512-weight capacitor is switched to REF –. If the voltage at the summing node is less
than the trip point of the threshold detector, a bit 1 is placed in the register and this 512-weight capacitor remains
connected to REF + through the remainder of the successive-approximation process. The process is repeated
for the 256-weight capacitor, the 128-weight capacitor, and so forth down the line until all bits are determined.
With each step of the successive-approximation process, the initial charge is redistributed among the
capacitors. The conversion process relies on charge redistribution to determine the bits from MSB to LSB.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
5
TLV1549C, TLV1549I, TLV1549M
10-BIT ANALOG-TO-DIGITAL CONVERTERS
WITH SERIAL CONTROL
SLAS071C – JANUARY 1993 – REVISED MARCH 1995
SC
Threshold
Detector
512
NODE 512
REF –
256
128
16
REF+
REF+
REF+
REF –
ST
REF –
ST
REF –
ST
8
4
REF+
REF –
ST
REF+
REF –
ST
2
1
REF+
REF+
REF –
ST
REF –
ST
To Output
Latches
1
REF –
ST
ST
VI
Figure 1. Simplified Model of the Successive-Approximation System
chip-select operation
The trailing edge of CS starts all modes of operation, and CS can abort a conversion sequence in any mode.
A high-to-low transition on CS within the specified time during an ongoing cycle aborts the cycle, and the device
returns to the initial state (the contents of the output data register remain at the previous conversion result).
Exercise care to prevent CS from being taken low close to completion of conversion because the output data
may be corrupted.
reference voltage inputs
There are two reference inputs used with the TLV1549: REF + and REF –. These voltage values establish the
upper and lower limits of the analog input to produce a full-scale and zero reading, respectively. The values of
REF+, REF –, and the analog input should not exceed the positive supply or be lower than GND consistent with
the specified absolute maximum ratings. The digital output is at full scale when the input signal is equal to or
higher than REF + and at zero when the input signal is equal to or lower than REF –.
absolute maximum ratings over operating free-air temperature range (unless otherwise noted)†
Supply voltage range, VCC (see Note 1): TLV1549C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 0.5 V to 6.5 V
TLV1549I . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 0.5 V to 6.5 V
TLV1549M . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 0.5 V to 6 V
Input voltage range, VI (any input) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 0.3 V to VCC + 0.3 V
Output voltage range, VO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 0.3 V to VCC + 0.3 V
Positive reference voltage, Vref + . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . VCC + 0.1 V
Negative reference voltage, Vref – . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 0.1 V
Peak input current (any input) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ± 20 mA
Peak total input current (all inputs) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ± 30 mA
Operating free-air temperature range, TA: TLV1549C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0°C to 70°C
TLV1549I . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 40°C to 85°C
TLV1549M . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 55°C to 125°C
Storage temperature range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 65°C to 150°C
Lead temperature 1,6 mm (1/16 inch) from the case for 10 seconds . . . . . . . . . . . . . . . . . . . . . . . . . . . . 260°C
† Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and
functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not
implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
NOTE 1: All voltage values are with respect to ground with REF – and GND wired together (unless otherwise noted).
6
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
TLV1549C, TLV1549I, TLV1549M
10-BIT ANALOG-TO-DIGITAL CONVERTERS
WITH SERIAL CONTROL
SLAS071C – JANUARY 1993 – REVISED MARCH 1995
recommended operating conditions
Supply voltage, VCC
MIN
NOM
MAX
3
3.3
3.6
Positive reference voltage, Vref + (see Note 2)
VCC
0
Negative reference voltage, Vref – (see Note 2)
Differential reference voltage, Vref + – Vref – (see Note 2)
2.5
Analog input voltage (see Note 2)
0
High-level control input voltage, VIH
VCC = 3 V to 3.6 V
VCC = 3 V to 3.6 V
Low-level control input voltage, VIL
Clock frequency at I/O CLOCK (see Note 3)
VCC
V
V
V
VCC + 0.2
VCC
2
0
UNIT
V
V
V
0.6
V
2.1
MHz
1.425
μs
0
ns
Pulse duration, I/O CLOCK high, twH(I/O)
190
ns
Pulse duration, I/O CLOCK low, twL(I/O)
190
Setup time, CS low before first I/O CLOCK↑, tsu(CS) (see Note 4)
Hold time, CS low after last I/O CLOCK↓, th(CS)
Transition time, I/O CLOCK, tt(I/O) (see Note 5 and Figure 5)
μs
10
μs
0
70
°C
TLV1549I
– 40
85
°C
TLV1549M
– 55
125
°C
Transition time, CS, tt(CS)
TLV1549C
Operating free-air temperature, TA
ns
1
NOTES: 2. Analog input voltages greater than that applied to REF + convert as all ones (1111111111), while input voltages less than that applied
to REF – convert as all zeros (0000000000). The TLV1549 is functional with reference voltages down to 1 V (Vref + – Vref –); however,
the electrical specifications are no longer applicable.
3. For 11- to 16-bit transfers, after the tenth I/O CLOCK falling edge (≤ 2 V), at least one I/O CLOCK rising edge (≥ 2 V) must occur
within 9.5 μs.
4. To minimize errors caused by noise at CS, the internal circuitry waits for a setup time plus two falling edges of the internal system
clock after CS↓ before responding to the I/O CLOCK. Therefore, no attempt should be made to clock out the data until the minimum
CS setup time has elapsed.
5. This is the time required for the clock input signal to fall from VIHmin to VILmax or to rise from VILmax to VIHmin. In the vicinity of
normal room temperature, the device functions with input clock transition time as slow as 1 μs for remote data-acquisition
applications where the sensor and the A / D converter are placed several feet away from the controlling microprocessor.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
7
TLV1549C, TLV1549I, TLV1549M
10-BIT ANALOG-TO-DIGITAL CONVERTERS
WITH SERIAL CONTROL
SLAS071C – JANUARY 1993 – REVISED MARCH 1995
electrical characteristics over recommended operating free-air temperature range,
VCC = Vref+ = 3 V to 3.6 V, I/O CLOCK frequency = 2.1 MHz (unless otherwise noted)
PARAMETER
TEST CONDITIONS
MIN
TYP†
MAX
VOH
High level output voltage
High-level
VCC = 3 V,
VCC = 3 V to 3.6 V,
IOH = – 1.6 mA
IOH = – 20 μA
VOL
Low level output voltage
Low-level
VCC = 3 V,
VCC = 3 V to 3.6 V,
IOL = 1.6 mA
IOL = 20 μA
IOZ
Off state (high-impedance-state)
Off-state
(high impedance state) output current
VO = VCC,
VO = 0,
CS at VCC
10
CS at VCC
– 10
IIH
IIL
High-level input current
VI = VCC
VI = 0
0.005
2.5
μA
Low-level input current
– 0.005
– 2.5
μA
ICC
Operating supply current
CS at 0 V
0.4
2.5
mA
Analog input leakage current
VI = VCC
VI = 0
Maximum static analog reference current into REF+
Ci
Input capacitance
V
VCC – 0.1
0.4
0.1
1
–1
TLV1549C, I (Analog)
Vref+ = VCC,
Vref – = GND
During sample cycle
30
TLV1549M, (Analog)
During sample cycle
30
TLV1549C, I (Control)
POST OFFICE BOX 655303
10
5
TLV1549M, (Control)
† All typical values are at VCC = 3.3 V, TA = 25°C.
8
2.4
UNIT
5
• DALLAS, TEXAS 75265
V
μA
μA
μA
55
15
pF
TLV1549C, TLV1549I, TLV1549M
10-BIT ANALOG-TO-DIGITAL CONVERTERS
WITH SERIAL CONTROL
SLAS071C – JANUARY 1993 – REVISED MARCH 1995
operating characteristics over recommended operating free-air temperature range,
VCC = Vref+ = 3 V to 3.6 V, I/O CLOCK frequency = 2.1 MHz
PARAMETER
TEST CONDITIONS
MIN
MAX
UNIT
±1
LSB
Zero error (see Note 7)
See Note 2
±1
LSB
Full-scale error (see Note 7)
See Note 2
±1
LSB
±1
LSB
21
μs
Linearity error (see Note 6)
Total unadjusted error (see Note 8)
tconv
Conversion time
See Figures 6 – 11
tc
Total cycle time (access, sample, and conversion)
See Figures 6 – 11
and Note 9
tv
td(I/O-DATA)
Valid time, DATA OUT remains valid after I/O CLOCK↓
See Figure 5
Delay time, I/O CLOCK↓ to DATA OUT valid
See Figure 5
240
ns
tPZH, tPZL
tPHZ, tPLZ
Enable time, CS↓ to DATA OUT (MSB driven)
See Figure 3
1.3
μs
Disable time, CS↑ to DATA OUT (high impedance)
See Figure 3
180
ns
tr(bus)
tf(bus)
Rise time, data bus
See Figure 5
300
ns
Fall time, data bus
See Figure 5
300
ns
21
+ 10 I/O
CLOCK
periods
10
μs
ns
td(I/O-CS)
Delay time, 10th I/O CLOCK↓ to CS↓ to abort conversion (see Note 10)
9
μs
NOTES: 2. Analog input voltages greater than that applied to REF + convert as all ones (1111111111), while input voltages less than that applied
to REF – convert as all zeros (0000000000). The device is functional with reference voltages down to 1 V (Vref + – Vref –); however,
the electrical specifications are no longer applicable.
6. Linearity error is the maximum deviation from the best straight line through the A / D transfer characteristics.
7. Zero error is the difference between 0000000000 and the converted output for zero input voltage; full-scale error is the difference
between 1111111111 and the converted output for full-scale input voltage.
8. Total unadjusted error comprises linearity, zero, and full-scale errors.
9. I/O CLOCK period = 1/(I/O CLOCK frequency). Sampling begins on the falling edge of the third I/O CLOCK, continues for seven
I/O CLOCK periods, and ends on the falling edge of the tenth I/O CLOCK (see Figure 5).
10. Any transitions of CS are recognized as valid only if the level is maintained for a minimum of a setup time plus two falling edges of
the internal clock (1.425 μs) after the transition.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
9
TLV1549C, TLV1549I, TLV1549M
10-BIT ANALOG-TO-DIGITAL CONVERTERS
WITH SERIAL CONTROL
SLAS071C – JANUARY 1993 – REVISED MARCH 1995
PARAMETER MEASUREMENT INFORMATION
VCC
Test Point
RL = 2.18 kΩ
DATA OUT
12 kΩ
CL = 100 pF
Figure 2. Load Circuit
2V
CS
0.8 V
tPZH, tPZL
DATA OUT
tPHZ, tPLZ
2.4 V
90%
0.4 V
10%
Figure 3. DATA OUT to Hi-Z Voltage Waveforms
2V
CS
0.8 V
tsu(CS)
I/O CLOCK
th(CS)
0.8 V
First
Clock
Last
Clock
0.8 V
Figure 4. CS to I/O CLOCK Voltage Waveforms
tt(I/O)
tt(I/O)
I/O CLOCK
2V
2V
0.8 V
0.8 V
0.8 V
I/O CLOCK Period
td(I/O-DATA)
tv
DATA OUT
2.4 V
2.4 V
0.4 V
0.4 V
tr(bus), tf(bus)
Figure 5. I/O CLOCK and DATA OUT Voltage Waveforms
10
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
TLV1549C, TLV1549I, TLV1549M
10-BIT ANALOG-TO-DIGITAL CONVERTERS
WITH SERIAL CONTROL
SLAS071C – JANUARY 1993 – REVISED MARCH 1995
PARAMETER MEASUREMENT INFORMATION
CS
(see Note A)
I/O
CLOCK
1
2
3
4
5
6
7
8
9
10
Sample Cycle B
DATA
OUT
ÎÎÎÎÎÎ
ÎÎÎÎÎÎ
1
Hi-Z State
A9
A8
A7
A6
A5
A4
A3
A2
A1
A0
Previous Conversion Data
MSB
B9
A/D
Conversion
Interval
(≤ 21 μs) Initialize
LSB
Initialize
Figure 6. Timing for 10-Clock Transfer Using CS
Must Be High on Power Up
CS
(see Note A)
I/O
CLOCK
1
2
3
4
5
6
7
8
9
10
1
Sample Cycle B
DATA
OUT
A9
A8
A7
A6
A5
A4
A3
See Note B
A2
A1
Previous Conversion Data
MSB
A0
Low Level
B9
A/D Conversion
Interval
(≤ 21 μs)
Initialize
LSB
Initialize
Figure 7. Timing for 10-Clock Transfer Not Using CS
ÏÏ
ÏÏ
ÏÏÎÎ
ÎÎ
ÎÎÎ
ÎÎÎ
See Note C
CS
(see Note A)
I/O
CLOCK
1
2
3
4
5
6
7
8
9
10
Sample Cycle B
DATA
OUT
A9
MSB
Initialize
A8
A7
A6
A5
A4
A3
A2
A1
Previous Conversion Data
A0
LSB
11
Low
Level
16
Hi-Z
1
B9
A/D
Conversion
Interval
(≤ 21 μs) Initialize
Figure 8. Timing for 11- to 16-Clock Transfer Using CS (Serial Transfer Completed Within 21 μs)
NOTES: A. To minimize errors caused by noise at CS, the internal circuitry waits for a setup time plus two falling edges of the internal system
clock after CS↓ before responding to the I/O CLOCK. No attempt should be made to clock out the data until the minimum CS setup
time has elapsed.
B. A low-to-high transition of CS disables I/O CLOCK within a maximum of a setup time plus two falling edges of the internal system
clock.
C. The first I/O CLOCK must occur after the end of the previous conversion.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
11
TLV1549C, TLV1549I, TLV1549M
10-BIT ANALOG-TO-DIGITAL CONVERTERS
WITH SERIAL CONTROL
SLAS071C – JANUARY 1993 – REVISED MARCH 1995
PARAMETER MEASUREMENT INFORMATION
Must Be High on Power Up
CS
(see Note A)
I/O
CLOCK
1
2
3
4
5
6
7
8
9
10
14
15
1
16
Sample Cycle B
DATA
OUT
A9
A8
A7
A6
A5
A4
A3
See Note C
A2
A1
Previous Conversion Data
MSB
Low Level
A0
B9
A/D Conversion
Interval
(≤ 21 μs)
LSB
Initialize
Initialize
Figure 9. Timing for 16-Clock Transfer Not Using CS (Serial Transfer Completed Within 21 μs)
CS
(see Note A)
I/O
CLOCK
1
2
3
4
5
6
7
8
9
10
A9
A8
A7
A6
A5
A4
A3
A2
A1
Previous Conversion Data
MSB
16
11
1
See Note B
Sample Cycle B
DATA
OUT
ÏÏÏ
ÏÏÏ
ÎÎÎ
ÌÌÌÌ
ÎÎÎ
ÌÌÌÌ
ÎÎÎ
ÎÎÎ
A0
LSB
Initialize
Hi-Z State
Low
Level
A/D
Conversion
Interval
(≤ 21 μs)
B9
Initialize
Figure 10. Timing for 11- to 16-Clock Transfer Using CS (Serial Transfer Completed After 21 μs)
Must Be High on Power Up
CS
(see Note A)
I/O
CLOCK
1
2
3
4
5
6
7
8
9
10
Sample Cycle B
DATA
OUT
A9
MSB
A8
A7
A6
A5
A4
A3
A2
14
15
See Note B
A1
Previous Conversion Data
A0
1
16
See Note C
Low Level
B9
LSB
A/D Conversion Interval
(≤ 21 μs)
Initialize
Figure 11. Timing for 16-Clock Transfer Not Using CS (Serial Transfer Completed After 21 μs)
NOTES: A. To minimize errors caused by noise at CS, the internal circuitry waits for a set up time plus two falling edges of the internal system
clock after CS↓ before responding to the I/O CLOCK. No attempt should be made to clock out the data until the minimum CS setup
time has elapsed.
B. A low-to-high transition of CS disables I/O CLOCK within a maximum of a setup time plus two falling edges of the internal system
clock.
C. The first I/O CLOCK must occur after the end of the previous conversion.
12
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
TLV1549C, TLV1549I, TLV1549M
10-BIT ANALOG-TO-DIGITAL CONVERTERS
WITH SERIAL CONTROL
SLAS071C – JANUARY 1993 – REVISED MARCH 1995
APPLICATION INFORMATION
1023
1111111111
See Notes A and B
1111111110
1022
1111111101
1021
VFT = VFS – 1/2 LSB
1000000001
1000000000
513
512
VZT = VZS + 1/2 LSB
Step
Digital Output Code
VFS
511
0111111111
VZS
0000000001
1
0000000000
0
0.003
0.006
1.5315
1.5345
1.5375
3.066
3.0675
2
0.0015
0000000010
3.069
0
3.072
VI – Analog Input Voltage – V
NOTES: A. This curve is based on the assumption that Vref + and Vref – have been adjusted so that the voltage at the transition from digital 0
to 1 (VZ T) is 0.0015 V and the transition to full scale (VF T) is 3.0675 V. 1 LSB = 3 mV.
B. The full-scale value (VFS) is the step whose nominal midstep value has the highest absolute value. The zero-scale value (VZS) is
the step whose nominal midstep value equals zero.
Figure 12. Ideal Conversion Characteristics
TLV1549
Analog Input
2 ANALOG IN
CS
I/O CLOCK
5
7
Processor
DATA OUT
5-V DC Regulated
Control
Circuit
6
1 REF+
3
REF –
GND
To Source
Ground
4
Figure 13. Typical Serial Interface
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
13
TLV1549C, TLV1549I, TLV1549M
10-BIT ANALOG-TO-DIGITAL CONVERTERS
WITH SERIAL CONTROL
SLAS071C – JANUARY 1993 – REVISED MARCH 1995
APPLICATION INFORMATION
simplified analog input analysis
Using the equivalent circuit in Figure 14, the time required to charge the analog input capacitance from 0 to VS
within 1/2 LSB can be derived as follows:
The capacitance charging voltage is given by
V
C
V
S
1– e
– t c R tC
i
(1)
where
Rt = Rs + ri
The final voltage to 1/2 LSB is given by
VC (1/2 LSB) = VS – (VS /2048)
(2)
Equating equation 1 to equation 2 and solving for time tc gives
V
S
V
S
2048
V
S
1– e
– t c R tC
i
(3)
and
tc (1/2 LSB) = Rt × Ci × ln(2048)
(4)
Therefore, with the values given the time for the analog input signal to settle is
tc (1/2 LSB) = (Rs + 1 kΩ) × 60 pF × ln(2048)
(5)
This time must be less than the converter sample time shown in the timing diagrams.
Driving Source†
TLV1549
Rs
VS
VI
ri
1 kΩ MAX
VC
Ci
50 pF MAX
VI = Input Voltage at ANALOG IN
VS = External Driving Source Voltage
Rs = Source Resistance
ri = Input Resistance
Ci = Equivalent Input Capacitance
† Driving source requirements:
• Noise and distortion for the source must be equivalent to the
resolution of the converter.
• Rs must be real at the input frequency.
Figure 14. Equivalent Input Circuit Including the Driving Source
14
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
PACKAGE OPTION ADDENDUM
www.ti.com
21-Apr-2022
PACKAGING INFORMATION
Orderable Device
Status
(1)
Package Type Package Pins Package
Drawing
Qty
Eco Plan
(2)
Lead finish/
Ball material
MSL Peak Temp
Op Temp (°C)
Device Marking
(3)
(4/5)
(6)
TLV1549CD
ACTIVE
SOIC
D
8
75
RoHS & Green
NIPDAU
Level-1-260C-UNLIM
-40 to 85
V1549C
TLV1549CDG4
ACTIVE
SOIC
D
8
75
RoHS & Green
NIPDAU
Level-1-260C-UNLIM
-40 to 85
V1549C
TLV1549CDR
ACTIVE
SOIC
D
8
2500
RoHS & Green
NIPDAU
Level-1-260C-UNLIM
TLV1549CP
ACTIVE
PDIP
P
8
50
RoHS & Green
NIPDAU
N / A for Pkg Type
TLV1549CP
TLV1549CPE4
ACTIVE
PDIP
P
8
50
RoHS & Green
NIPDAU
N / A for Pkg Type
TLV1549CP
TLV1549ID
ACTIVE
SOIC
D
8
75
RoHS & Green
NIPDAU
Level-1-260C-UNLIM
V1549I
TLV1549IDG4
ACTIVE
SOIC
D
8
75
RoHS & Green
NIPDAU
Level-1-260C-UNLIM
V1549I
TLV1549IP
ACTIVE
PDIP
P
8
50
RoHS & Green
NIPDAU
N / A for Pkg Type
V1549C
TLV1549IP
(1)
The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2)
RoHS: TI defines "RoHS" to mean semiconductor products that are compliant with the current EU RoHS requirements for all 10 RoHS substances, including the requirement that RoHS substance
do not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, "RoHS" products are suitable for use in specified lead-free processes. TI may
reference these types of products as "Pb-Free".
RoHS Exempt: TI defines "RoHS Exempt" to mean products that contain lead but are compliant with EU RoHS pursuant to a specific EU RoHS exemption.
Green: TI defines "Green" to mean the content of Chlorine (Cl) and Bromine (Br) based flame retardants meet JS709B low halogen requirements of