TLV2422, TLV2422A, TLV2422Y
Advanced LinCMOS RAIL-TO-RAIL OUTPUT
WIDE-INPUT-VOLTAGE MICROPOWER DUAL OPERATIONAL AMPLIFIERS
SLOS199C – SEPTEMBER 1997 – REVISED APRIL 2001
D
D
D
D
D
Output Swing Includes Both Supply Rails
Extended Common-Mode Input Voltage
Range . . . 0 V to 4.5 V (Min) With 5-V Single
Supply
No Phase Inversion
Low Noise . . . 18 nV/√Hz Typ at f = 1 kHz
Low Input Offset Voltage
950 µV Max at TA = 25°C (TLV2422A)
D
D
D
D
Low Input Bias Current . . . 1 pA Typ
Micropower Operation . . . 50 µA Per
Channel
600-Ω Output Drive
Available in Q-Temp Automotive
HighRel Automotive Applications
Configuration Control / Print Support
Qualification to Automotive Standards
description
Other members in the TLV2422 family are the
high-power, TLV2442, and low-power, TLV2432,
versions.
HIGH-LEVEL OUTPUT VOLTAGE
vs
HIGH-LEVEL OUTPUT CURRENT
5
VDD = 5 V
VOH – High-Level Output Voltage – V
The TLV2422 and TLV2422A are dual low-voltage
operational amplifiers from Texas Instruments.
The common-mode input voltage range for this
device has been extended over the typical CMOS
amplifiers making them suitable for a wide range
of applications. In addition, the devices do not
phase invert when the common-mode input is
driven to the supply rails. This satisfies most
design requirements without paying a premium
for rail-to-rail input performance. They also exhibit
rail-to-rail output performance for increased
dynamic range in single- or split-supply
applications. This family is fully characterized at
3-V and 5-V supplies and is optimized for
low-voltage operation. The TLV2422 only requires
50 µA of supply current per channel, making it
ideal for battery-powered applications. The
TLV2422 also has increased output drive over
previous rail-to-rail operational amplifiers and can
drive 600-Ω loads for telecom applications.
TA = –40°C
4
TA = 25°C
3
2
TA = 85°C
1
TA = 125°C
0
0
4
8
12
16
20
24
28
32
36
40
IOH – High-Level Output Current – mA
Figure 1
The TLV2422, exhibiting high input impedance and low noise, is excellent for small-signal conditioning for
high-impedance sources, such as piezoelectric transducers. Because of the micropower dissipation levels and
low-voltage operation, these devices work well in hand-held monitoring and remote-sensing applications. In
addition, the rail-to-rail output feature with single- or split-supplies makes this family a great choice when
interfacing with analog-to-digital converters (ADCs). For precision applications, the TLV2422A is available with
a maximum input offset voltage of 950 µV.
If the design requires single operational amplifiers, see the TI TLV2211/21/31. This is a family of rail-to-rail output
operational amplifiers in the SOT-23 package. Their small size and low power consumption, make them ideal
for high density, battery-powered equipment.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
Advanced LinCMOS is a trademark of Texas Instruments.
Copyright 2001, Texas Instruments Incorporated
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
On products compliant to MIL-PRF-38535, all parameters are tested
unless otherwise noted. On all other products, production
processing does not necessarily include testing of all parameters.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
1
TLV2422, TLV2422A, TLV2422Y
Advanced LinCMOS RAIL-TO-RAIL OUTPUT
WIDE-INPUT-VOLTAGE MICROPOWER DUAL OPERATIONAL AMPLIFIERS
SLOS199C – SEPTEMBER 1997 – REVISED APRIL 2001
AVAILABLE OPTIONS
PACKAGED DEVICES
TA
VIOmax
AT 25°C
SMALL
OUTLINE
(D)
CHIP CARRIER
(FK)
CERAMIC DIP
(JG)
TSSOP
(PW)
CERAMIC
FLAT PACK
(U)
0°C to 70°C
2.5 mV
TLV2422CD
—
—
TLV2422CPWLE
—
– 40°C to 85°C
950 µV
µ
2.5 mV
TLV2422AID
TLV2422ID
—
—
—
—
TLV2422AIPWLE
—
—
—
– 40°C to 125°C
950 µV
µ
2.5 mV
TLV2422AQD
TLV2422QD
—
—
—
—
—
—
—
—
– 55°C to 125°C
950 µV
µ
2 mV
—
—
TLV2422AMFK
TLV2422MFK
TLV2422AMJG
TLV2422MJG
—
—
TLV2422AMU
TLV2422MU
CHIP FORM
(Y)
TLV2422Y
The D packages are available taped and reeled. Add R suffix to device type (e.g., TLV2422CDR). The PW package is available only left-end taped
and reeled. Chips are tested at 25°C.
D OR JG PACKAGE
(TOP VIEW)
1OUT
1IN –
1IN +
VDD – /GND
1
8
2
7
3
6
4
5
PW PACKAGE
(TOP VIEW)
VDD +
2OUT
2IN –
2IN +
1OUT
1IN–
1IN +
VDD – / GND
1
2
3
4
8
7
6
5
VDD +
2OUT
2IN –
2IN +
NC
1OUT
NC
VDD+
NC
FK PACKAGE
(TOP VIEW)
4
3 2 1 20 19
18
5
17
6
16
7
15
8
14
9 10 11 12 13
NC
2OUT
NC
2IN –
NC
NC
1OUT
1IN –
1IN +
VDD – /GND
NC
VDD– /GND
NC
2IN+
NC
NC
1IN –
NC
1IN +
NC
U PACKAGE
(TOP VIEW)
NC – No internal connection
2
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
1
10
2
9
3
8
4
7
5
6
NC
VDD +
2OUT
2IN –
2IN +
equivalent schematic (each amplifier)
COMPONENT
COUNT
Q22
Q29
Q31
Q34
Q36
Transistors
Diodes
Resistors
Capacitors
VB3
69
5
26
6
Q26
Q32
VB2
VB1
VDD+
Q25
Q35
Q33
Q27
Q30
Q37
R10
D1
R9
R3
Q3
R4
R7
Q13
IN–
Q1
Q6
Q4
Q8
Q15
Q10
Q18
Q20
IN+
Q7
R5
Q9
C2
VDD–/GND
C1
VB3
Q11
Q16
R6
OUT
C3
VB2
Q2
Q14
Q5
Q17
Q12
R1
Q21
Q19
R2
R8
VB4
SLOS199C – SEPTEMBER 1997 – REVISED APRIL 2001
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
Q23
VB4
3
TLV2422, TLV2422A
Advanced LinCMOS RAIL-TO-RAIL OUTPUT
WIDE-INPUT-VOLTAGE MICROPOWER DUAL OPERATIONAL AMPLIFIERS
Q24
TLV2422, TLV2422A
Advanced LinCMOS RAIL-TO-RAIL OUTPUT
WIDE-INPUT-VOLTAGE MICROPOWER DUAL OPERATIONAL AMPLIFIERS
SLOS199C – SEPTEMBER1997 – REVISED APRIL 2001
absolute maximum ratings over operating free-air temperature range (unless otherwise noted)†
Supply voltage, VDD (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 V
Differential input voltage, VID (see Note 2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ± VDD
Input voltage, VI (any input, see Note 1): C and I suffix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 0.3 V to VDD
Input current, II (each input) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ± 5 mA
Output current, IO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ± 50 mA
Total current into VDD + . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ± 50 mA
Total current out of VDD – . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ± 50 mA
Duration of short-circuit current at (or below) 25°C (see Note 3) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . unlimited
Continuous total power dissipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . See Dissipation Rating Table
Operating free-air temperature range, TA: C suffix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0°C to 70°C
I suffix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 40°C to 85°C
Q suffix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 40°C to 125°C
M suffix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 55°C to 125°C
Storage temperature range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 65°C to 150°C
Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 260°C
† Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and
functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not
implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
NOTES: 1. All voltage values, except differential voltages, are with respect to the midpoint between VDD+ and VDD – .
2. Differential voltages are at IN+ with respect to IN –. Excessive current flows if input is brought below VDD – – 0.3 V.
3. The output may be shorted to either supply. Temperature and/or supply voltages must be limited to ensure that the maximum
dissipation rating is not exceeded.
DISSIPATION RATING TABLE
PACKAGE
TA ≤ 25°C
POWER RATING
DERATING FACTOR
ABOVE TA = 25°C
TA = 70°C
POWER RATING
TA = 85°C
POWER RATING
TA = 125°C
POWER RATING
D
FK
JG
PW
U
725 mW
1375 mW
1050 mW
525 mW
675 mW
5.8 mW/°C
11.0 mW/°C
8 4 mW/°C
8.4
4.2 mW/
mW/°C
C
5.4 mW/°C
464 mW
880 mW
672 mW
336 mW
432 mW
377 mW
715 mW
546 mW
273 mW
350 mW
145 mW
275 mW
210 mW
105 mW
135 mW
recommended operating conditions
C SUFFIX
MIN
Supply voltage, VDD ±
2.7
Input voltage range, VI
Common-mode input voltage, VIC
VDD –
VDD –
Operating free-air temperature, TA
0
4
MAX
10
VDD + – 0.8
VDD + – 0.8
70
I SUFFIX
MIN
2.7
VDD –
VDD –
– 40
POST OFFICE BOX 655303
MAX
10
VDD + – 0.8
VDD + – 0.8
85
Q SUFFIX
MIN
2.7
VDD –
VDD –
– 40
• DALLAS, TEXAS 75265
MAX
10
VDD + – 0.8
VDD + – 0.8
125
M SUFFIX
MIN
2.7
VDD –
VDD –
– 55
MAX
UNIT
10
V
VDD + – 0.8
VDD + – 0.8
V
125
°C
V
TLV2422, TLV2422A
Advanced LinCMOS RAIL-TO-RAIL OUTPUT
WIDE-INPUT-VOLTAGE MICROPOWER DUAL OPERATIONAL AMPLIFIERS
SLOS199C – SEPTEMBER1997 – REVISED APRIL 2001
electrical characteristics at specified free-air temperature, VDD = 3 V (unless otherwise noted)
PARAMETER
TEST CONDITIONS
Input offset voltage
αVIO
Temperature coefficient of input offset voltage
IIB
Input bias current
VICR
VOL
AVD
MAX
300
2000
2500
25°C
to 70°C
VDD ± = ± 2.5 V,
RS = 50 Ω
VIC = 0,
VO = 0
0,
25°C
0.003
25°C
0.5
25°C
1
|VIO| ≤ 5 mV
mV,
Common mode input voltage range
Common-mode
High-level output voltage
IOH = – 500 µA
Low-level output voltage
Large-signal
g
g
differential voltage
g amplification
0
to
2.5
Full range
0
to
2.2
RS = 50 Ω
IOL = 100 µA
VIC = 0
0,
IOL = 250 µA
RL = 10 kه
VIC = 2.5
2 5 V,
V
VO = 1 V to 2 V
RL = 1 Mه
–0.25
to
2.75
25°C
2.97
25°C
2.75
Full range
VIC = 0,
60
150
25°C
µV
µV/mo
60
150
Full range
UNIT
µV/°C
2
Full range
IOH = – 100 µA
VOH
TYP
Full range
Input offset voltage long-term drift (see Note 4)
Input offset current
TLV2422C
MIN
25°C
VIO
IIO
TA†
pA
pA
V
V
2.5
25°C
0.05
25°C
0.2
Full range
V
0.5
25°C
6
Full range
3
10
V/mV
25°C
700
ri(d)
Differential input resistance
25°C
1012
Ω
ri(c)
Common-mode input resistance
25°C
1012
Ω
ci(c)
Common-mode input capacitance
f = 10 kHz
25°C
8
pF
zo
Closed-loop output impedance
f = 100 kHz,
25°C
130
Ω
CMRR
Common mode rejection ratio
Common-mode
VIC = 0 to 2.5 V,, VO = 1.5 V,,
RS = 50 Ω
kSVR
Supply voltage rejection ratio (∆VDD/∆VIO)
Supply-voltage
VDD = 2.7 V to 8 V,,
VIC = VDD /2,
No load
IDD
Supply current
VO = 1
1.5
5V
V,
AV = 10
No load
25°C
70
Full range
70
25°C
80
Full range
80
25°C
Full range
83
dB
95
100
dB
150
175
µA
† Full range is 0°C to 70°C.
‡ Referenced to 2.5 V
NOTE 4: Typical values are based on the input offset voltage shift observed through 500 hours of operating life test at TA = 150°C extrapolated
to TA = 25°C using the Arrhenius equation and assuming an activation energy of 0.96 eV.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
5
TLV2422, TLV2422A
Advanced LinCMOS RAIL-TO-RAIL OUTPUT
WIDE-INPUT-VOLTAGE MICROPOWER DUAL OPERATIONAL AMPLIFIERS
SLOS199C – SEPTEMBER1997 – REVISED APRIL 2001
electrical characteristics at specified free-air temperature, VDD = 3 V (unless otherwise noted)
PARAMETER
VIO
Input offset voltage
αVIO
Temperature
coefficient of input
offset voltage
Input offset voltage
long-term drift (see
Note 4)
IIO
Input offset current
IIB
Input bias current
VICR
VOH
VOL
Common-mode input
voltage range
High-level
Hi
hl
l output
t t
voltage
Low-level
L
l
l output
t t
voltage
TEST CONDITIONS
TA†
TLV2422I
MIN
25°C
MAX
300
2000
Full range
VDD ± = ± 2.5 V,
RS = 50 Ω
VIC = 0,
VIC = 0
0,
0.003
0.003
µV/mo
25°C
0.5
60
0.5
150
1
0
to
2.5
60
Full range
0
to
2.2
–0.25
to
2.75
1
2.97
25°C
2.75
0
to
2.5
–0.25
to
2.75
0.05
25°C
0.2
Full range
V
V
2.75
0.05
V
0.2
0.5
3
pA
2.5
25°C
6
pA
2.97
2.5
25°C
60
150
0
to
2.2
25°C
Full range
60
150
150
25°C
Full range
IOL = 250 µA
µV
25°C
RS = 50 Ω
IOL = 100 µA
950
1500
UNIT
µV/°C
25°C
IOH = – 500 µA
300
MAX
2
Full range
IOH = – 100 µA
TYP
2
Full range
|VIO| ≤ 5 mV
mV,
MIN
2500
25°C
to 70°C
VIC = 0,
VO = 0,
TLV2422AI
TYP
10
0.5
6
10
AVD
Large signal
Large-signal
differential voltage
amplification
25°C
700
700
ri(d)
Differential input
resistance
25°C
1012
1012
Ω
ri(c)
Common-mode input
resistance
25°C
1012
1012
Ω
ci(c)
Common-mode input
capacitance
f = 10 kHz
25°C
8
8
pF
zo
Closed-loop output
impedance
f = 100 kHz,
25°C
130
130
Ω
CMRR
Common-mode
rejection ratio
VIC = 0 to 2.5 V,, VO = 1.5 V,,
RS = 50 Ω
kSVR
Supply-voltage
rejection ratio
(∆VDD/∆VIO)
VDD = 2.7 V to 8 V,,
VIC = VDD /2,
No load
IDD
Supply current
VO = 1
1.5
5V
V,
RL = 10 kه
VIC = 2.5
2 5 V,
V
VO = 1 V to 2 V
RL = 1 Mه
AV = 10
No load
25°C
70
Full range
70
25°C
80
Full range
80
3
83
70
V/mV
83
dB
70
95
80
95
dB
25°C
Full range
80
100
150
175
100
150
175
µA
† Full range is – 40°C to 85°C.
‡ Referenced to 2.5 V
NOTE 4: Typical values are based on the input offset voltage shift observed through 500 hours of operating life test at TA = 150°C extrapolated
to TA = 25°C using the Arrhenius equation and assuming an activation energy of 0.96 eV.
6
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
TLV2422, TLV2422A
Advanced LinCMOS RAIL-TO-RAIL OUTPUT
WIDE-INPUT-VOLTAGE MICROPOWER DUAL OPERATIONAL AMPLIFIERS
SLOS199C – SEPTEMBER1997 – REVISED APRIL 2001
operating characteristics at specified free-air temperature, VDD = 3 V
PARAMETER
TEST CONDITIONS
VO = 1.5
1 5 V to
t 3.5
3 5 V,
V
CL = 100 pF‡
SR
Slew rate at unity gain
Vn
Equivalent input noise voltage
VN(PP)
Peak to peak equivalent input noise voltage
Peak-to-peak
In
Equivalent input noise current
THD + N
Total harmonic distortion plus noise
ts
φm
MIN
TYP
25°C
0.01
0.02
Full
range
0.008
25°C
100
25°C
23
f = 0.1 Hz to 1 Hz
25°C
2.7
f = 0.1 Hz to 10 Hz
25°C
4
25°C
0.6
Maximum output-swing bandwidth
VO(PP) = 1 V,
RL = 10 kه,
AV = 1,
CL = 100 pF‡
To 0.1%
0 1%
Settling time
AV = – 1,
Step = 0.5 V to 2.5 V,,
RL = 10 kه,
CL = 100 pF‡
‡
RL = 10 kه,
CL = 100 pF‡
POST OFFICE BOX 655303
fA√Hz
1.8%
25°C
46
kHz
25°C
8.3
kHz
86
8.6
01%
To 0
0.01%
• DALLAS, TEXAS 75265
µV
0.25%
µs
25°C
Gain margin
† Full range for the C version is 0°C to 70°C. Full range for the I version is – 40°C to 85°C.
‡ Referenced to 2.5 V
nV/√Hz
25°C
AV = 10
RL = 10 kه,
UNIT
MAX
V/µs
f = 1 kHz
AV = 1
Phase margin at unity gain
TLV2422C, TLV2422I
TLV2422AI
f = 10 Hz
VO = 0.5 V to 2.5 V,
f = 1 kHz
kHz,
RL = 10 kه
f = 10 kHz,
CL = 100 pF‡
Gain-bandwidth product
BOM
RL = 10 kه,
TA†
16
25°C
62°
25°C
11
dB
7
TLV2422, TLV2422A
Advanced LinCMOS RAIL-TO-RAIL OUTPUT
WIDE-INPUT-VOLTAGE MICROPOWER DUAL OPERATIONAL AMPLIFIERS
SLOS199C – SEPTEMBER1997 – REVISED APRIL 2001
electrical characteristics at specified free-air temperature, VDD = 3 V (unless otherwise noted)
PARAMETER
TEST CONDITIONS
TA†
TLV2422Q,
TLV2422M
MIN
VIO
Input offset voltage
αVIO
Temperature
coefficient of input
offset voltage
Input offset voltage
long-term drift (see
Note 4)
IIO
Input offset current
IIB
Input bias current
VICR
VOH
VOL
AVD
Common-mode input
voltage range
High-level
Hi
hl
l output
t t
voltage
Low-level
L
l
l output
t t
voltage
Large-signal
Large
signal
differential voltage
amplification
25°C
TYP
MAX
300
2000
Full range
VDD ± = ± 1.5 V,
RS = 50 Ω
µV/mo
25°C
0.5
RL = 10 kه
VIC = 1.5
1 5 V,
V
VO = 1 V to 2 V
RL = 1 Mه
60
0.5
150
1
25°C
0
to
2.5
60
Full range
0
to
2.2
–0.25
to
2.75
1
0
to
2.5
–0.25
to
2.75
V
2.75
2.5
25°C
0.05
25°C
0.2
Full range
0.05
V
0.2
0.5
2
pA
2.97
2.75
Full range
pA
V
0
to
2.2
2.5
6
60
300
2.97
25°C
60
150
300
25°C
IOL = 250 µA
µV
0.003
Full range
VIC = 0
0,
1800
0.003
25°C
IOL = 100 µA
950
25°C
RS = 50 Ω
VIC = 0,
300
µV/°C
25°C
IOH = – 500 µA
MAX
2
Full range
IOH = – 100 µA
UNIT
TYP
2
Full range
|VIO| ≤ 5 mV
mV,
MIN
2500
Full range
VIC = 0,
VO = 0,
TLV2422AQ,
TLV2422AM
10
0.5
6
10
2
V/mV
25°C
700
700
ri(d)
Differential input
resistance
25°C
1012
1012
Ω
ri(c)
Common-mode input
resistance
25°C
1012
1012
Ω
ci(c)
Common-mode input
capacitance
f = 10 kHz
25°C
8
8
pF
zo
Closed-loop output
impedance
f = 100 kHz,
25°C
130
130
Ω
CMRR
Common-mode
rejection ratio
VIC = VICR min,, VO = 1.5 V,,
RS = 50 Ω
kSVR
Supply-voltage
rejection ratio
(∆VDD/∆VIO)
VDD = 2.7 V to 8 V,,
VIC = VDD /2,
No load
IDD
Supply current
5V
VO = 1
1.5
V,
AV = 10
No load
25°C
70
Full range
70
25°C
80
Full range
80
83
70
83
dB
70
95
80
95
dB
25°C
Full range
80
100
150
175
100
150
175
µA
† Full range is – 40°C to 125°C for Q level part, – 55°C to 125°C for M level part.
‡ Referenced to 1.5 V
NOTE 4: Typical values are based on the input offset voltage shift observed through 500 hours of operating life test at TA = 150°C extrapolated
to TA = 25°C using the Arrhenius equation and assuming an activation energy of 0.96 eV.
8
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
TLV2422, TLV2422A
Advanced LinCMOS RAIL-TO-RAIL OUTPUT
WIDE-INPUT-VOLTAGE MICROPOWER DUAL OPERATIONAL AMPLIFIERS
SLOS199C – SEPTEMBER1997 – REVISED APRIL 2001
operating characteristics at specified free-air temperature, VDD = 3 V
PARAMETER
TEST CONDITIONS
VO = 1.1
1 1 V to
t 1.9
1 9 V,
V
CL = 100 pF‡
SR
Slew rate at unity gain
Vn
Equivalent input noise voltage
VN(PP)
Peak to peak equivalent input noise voltage
Peak-to-peak
In
Equivalent input noise current
THD + N
Total harmonic distortion plus noise
BOM
ts
φm
RL = 10 kه,
TYP
0.01
0.02
Full
range
0.008
25°C
100
25°C
23
f = 0.1 Hz to 1 Hz
25°C
2.7
f = 0.1 Hz to 10 Hz
25°C
4
25°C
0.6
Gain-bandwidth product
f = 10 kHz,
CL = 100 pF‡
RL = 10 kه,
Maximum output-swing bandwidth
VO(PP) = 1 V,
RL = 10 kه,
AV = 1,
CL = 100 pF‡
0 1%
To 0.1%
Settling time
AV = – 1,
Step = 0.5 V to 2.5 V,,
RL = 10 kه,
CL = 100 pF‡
‡
RL = 10 kه,
CL = 100 pF‡
UNIT
MAX
V/µs
f = 1 kHz
AV = 1
Gain margin
MIN
25°C
f = 10 Hz
VO = 0.5 V to 2.5 V,
f = 1 kHz
kHz,
RL = 10 kه
Phase margin at unity gain
TA†
TLV2422Q,
TLV2422M,
TLV2422AQ,
TLV2422AM
nV/√Hz
µV
fA√Hz
0.25%
25°C
AV = 10
1.8%
25°C
46
kHz
25°C
8.3
kHz
86
8.6
µs
25°C
To 0
0.01%
01%
16
25°C
62°
25°C
11
dB
† Full range is – 40°C to 125°C for Q level part, – 55°C to 125°C for M level part.
‡ Referenced to 1.5 V
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
9
TLV2422, TLV2422A
Advanced LinCMOS RAIL-TO-RAIL OUTPUT
WIDE-INPUT-VOLTAGE MICROPOWER DUAL OPERATIONAL AMPLIFIERS
SLOS199C – SEPTEMBER1997 – REVISED APRIL 2001
electrical characteristics at specified free-air temperature, VDD = 5 V (unless otherwise noted)
PARAMETER
TEST CONDITIONS
Input offset voltage
αVIO
Temperature coefficient of input offset voltage
IIB
Input bias current
VICR
VOL
AVD
MAX
300
2000
2500
25°C
to 70°C
VDD ± = ± 2.5 V,
RS = 50 Ω
VIC = 0,
VO = 0
0,
25°C
0.003
25°C
0.5
25°C
1
|VIO| ≤ 5 mV
mV,
Common mode input voltage range
Common-mode
High-level output voltage
Large-signal
g
g
differential voltage
g amplification
Full range
0
to
4.2
25°C
IOH = – 1 mA
Low-level output voltage
0
to
4.5
RS = 50 Ω
VIC = 2.5 V,
IOL = 100 µA
5V
VIC = 2
2.5
V,
IOL = 500 µA
RL = 10 kه
VIC = 2.5
2 5 V,
V
VO = 1 V to 4 V
RL = 1 Mه
60
150
25°C
µV
µV/mo
60
150
Full range
UNIT
µV/°C
2
Full range
IOH = – 100 µA
VOH
TYP
Full range
Input offset voltage long-term drift (see Note 4)
Input offset current
TLV2422C
MIN
25°C
VIO
IIO
TA†
–0.25
to
4.75
pA
pA
V
4.97
25°C
4.5
Full range
4.25
V
4.75
25°C
0.04
25°C
0.15
Full range
V
0.5
25°C
8
Full range
5
12
V/mV
25°C
1000
ri(d)
Differential input resistance
25°C
1012
Ω
ri(c)
Common-mode input resistance
25°C
1012
Ω
ci(c)
Common-mode input capacitance
f = 10 kHz
25°C
8
pF
zo
Closed-loop output impedance
f = 100 kHz,
25°C
130
Ω
CMRR
Common mode rejection ratio
Common-mode
VIC = 0 to 4.5 V,, VO = 2.5 V,,
RS = 50 Ω
kSVR
Supply voltage rejection ratio (∆VDD/∆VIO)
Supply-voltage
VDD = 4.4 V to 8 V,,
VIC = VDD /2,
No load
IDD
Supply current
VO = 2
2.5
5V
V,
AV = 10
No load
25°C
70
Full range
70
25°C
80
Full range
80
25°C
Full range
90
dB
95
100
dB
150
175
µA
† Full range is 0°C to 70°C.
‡ Referenced to 2.5 V
NOTE 4: Typical values are based on the input offset voltage shift observed through 500 hours of operating life test at TA = 150°C extrapolated
to TA = 25°C using the Arrhenius equation and assuming an activation energy of 0.96 eV.
10
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
TLV2422, TLV2422A
Advanced LinCMOS RAIL-TO-RAIL OUTPUT
WIDE-INPUT-VOLTAGE MICROPOWER DUAL OPERATIONAL AMPLIFIERS
SLOS199C – SEPTEMBER1997 – REVISED APRIL 2001
electrical characteristics at specified free-air temperature, VDD = 5 V (unless otherwise noted)
PARAMETER
VIO
Input offset voltage
αVIO
Temperature
coefficient of input
offset voltage
Input offset voltage
long-term drift (see
Note 4)
IIO
Input offset current
IIB
Input bias current
VICR
VOH
VOL
Common-mode input
voltage range
High-level
Hi
hl
l output
t t
voltage
Low-level
L
l
l output
t t
voltage
TA†
TEST CONDITIONS
TLV2422I
MIN
25°C
MAX
300
2000
Full range
VDD ± = ± 2.5 V,
RS = 50 Ω
VIC = 2.5 V,
VIC = 2
2.5
5V
V,
0.003
0.003
µV/mo
25°C
0.5
60
0.5
150
1
60
Full range
0
to
4.2
25°C
–0.25
to
4.75
1
4.5
Full range
4.25
0
to
4.5
–0.25
to
4.75
4.5
0.15
Full range
0.04
V
0.15
0.5
5
V
4.75
4.25
0.04
8
pA
4.97
4.75
25°C
25°C
pA
V
0
to
4.2
25°C
Full range
60
150
4.97
25°C
60
150
150
0
to
4.5
RS = 50 Ω
IOL = 500 µA
µV
25°C
25°C
IOL = 100 µA
950
1500
UNIT
µV/°C
25°C
IOH = – 1 mA
300
MAX
2
Full range
IOH = – 100 µA
TYP
2
Full range
|VIO| ≤ 5 mV
mV,
MIN
2500
25°C
to 70°C
VIC = 0,
VO = 0,
TLV2422AI
TYP
12
0.5
8
12
AVD
Large signal
Large-signal
differential voltage
amplification
25°C
1000
1000
ri(d)
Differential input
resistance
25°C
1012
1012
Ω
ri(c)
Common-mode input
resistance
25°C
1012
1012
Ω
ci(c)
Common-mode input
capacitance
f = 10 kHz
25°C
8
8
pF
zo
Closed-loop output
impedance
f = 100 kHz,
25°C
130
130
Ω
CMRR
Common-mode
rejection ratio
VIC = 0 to 4.5 V,, VO = 2.5 V,,
RS = 50 Ω
kSVR
Supply-voltage
rejection ratio
(∆VDD/∆VIO)
VDD = 4.4 V to 8 V,,
VIC = VDD /2,
No load
IDD
Supply current
VO = 2
2.5
5V
V,
RL = 10 kه
VIC = 2.5
2 5 V,
V
VO = 1 V to 4 V
RL = 1 Mه
AV = 10
No load
25°C
70
Full range
70
25°C
80
Full range
80
5
90
70
V/mV
90
dB
70
95
80
95
dB
25°C
Full range
80
100
150
175
100
150
175
µA
† Full range is – 40°C to 85°C.
‡ Referenced to 2.5 V
NOTE 4: Typical values are based on the input offset voltage shift observed through 500 hours of operating life test at TA = 150°C extrapolated
to TA = 25°C using the Arrhenius equation and assuming an activation energy of 0.96 eV.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
11
TLV2422, TLV2422A
Advanced LinCMOS RAIL-TO-RAIL OUTPUT
WIDE-INPUT-VOLTAGE MICROPOWER DUAL OPERATIONAL AMPLIFIERS
SLOS199C – SEPTEMBER1997 – REVISED APRIL 2001
operating characteristics at specified free-air temperature, VDD = 5 V
PARAMETER
SR
TEST CONDITIONS
VO = 1
1.5
5 V to 3
3.5
5V
V,
CL = 100 pF
F‡
Slew rate at unity gain
Vn
Equivalent input noise voltage
VN(PP)
Peak to peak equivalent input noise voltage
Peak-to-peak
In
Equivalent input noise current
THD + N
Total harmonic distortion plus noise
BOM
ts
φm
RL = 10 kه,
TYP
25°C
0.01
0.02
Full
range
0 008
0.008
100
25°C
18
f = 0.1 Hz to 1 Hz
25°C
1.9
f = 0.1 Hz to 10 Hz
25°C
2.8
25°C
0.6
Gain-bandwidth product
f = 10 kHz,
CL = 100 pF‡
RL =10 kه,
Maximum output-swing bandwidth
VO(PP) = 2 V,
RL = 10 kه,
AV = 1,
CL = 100 pF‡
0 1%
To 0.1%
Settling time
AV = – 1,
Step = 1.5 V to 3.5 V,,
RL = 10 kه,
CL = 100 pF‡
‡
RL = 10 kه,
CL = 100 pF‡
POST OFFICE BOX 655303
nV/√Hz
µV
fA√Hz
0.24%
25°C
AV = 10
1.7%
25°C
52
kHz
25°C
5.3
kHz
85
8.5
µs
25°C
To 0.01%
0 01%
• DALLAS, TEXAS 75265
UNIT
MAX
V/µs
25°C
† Full range for the C version is 0°C to 70°C. Full range for the I version is – 40°C to 85°C.
‡ Referenced to 2.5 V
12
MIN
f = 1 kHz
AV = 1
Gain margin
TLV2422C, TLV2422I
TLV2422AI
f = 10 Hz
VO = 1.5 V to 3.5 V,
f = 1 kHz
kHz,
RL = 10 kه
Phase margin at unity gain
TA†
15 5
15.5
25°C
66°
25°C
11
dB
TLV2422, TLV2422A
Advanced LinCMOS RAIL-TO-RAIL OUTPUT
WIDE-INPUT-VOLTAGE MICROPOWER DUAL OPERATIONAL AMPLIFIERS
SLOS199C – SEPTEMBER1997 – REVISED APRIL 2001
electrical characteristics at specified free-air temperature, VDD = 5 V (unless otherwise noted)
PARAMETER
TA†
TEST CONDITIONS
TLV2422Q,
TLV2422M
MIN
VIO
Input offset voltage
αVIO
Temperature
coefficient of input
offset voltage
Input offset voltage
long-term drift (see
Note 4)
IIO
Input offset current
IIB
Input bias current
VICR
VOH
VOL
AVD
Common-mode input
voltage range
High-level
Hi
hl
l output
t t
voltage
Low-level
L
l
l output
t t
voltage
Large-signal
Large
signal
differential voltage
amplification
25°C
TYP
MAX
300
2000
Full range
VDD ± = ± 2.5 V,
RS = 50 Ω
µV/mo
25°C
0.5
RL = 10 kه
VIC = 2.5
2 5 V,
V
VO = 1 V to 4 V
RL = 1 Mه
60
0.5
150
1
25°C
0
to
4.5
60
Full range
0
to
4.2
–0.25
to
4.75
1
0
to
4.5
–0.25
to
4.75
V
4.75
4.5
25°C
0.04
25°C
0.15
Full range
0.04
V
0.15
0.5
3
pA
4.97
4.75
Full range
pA
V
0
to
4.2
4.5
8
60
300
4.97
25°C
60
150
300
25°C
IOL = 500 µA
µV
0.003
Full range
VIC = 2
2.5
5V
V,
1800
0.003
25°C
IOL = 100 µA
950
25°C
RS = 50 Ω
VIC = 2.5 V,
300
µV/°C
25°C
IOH = – 1 mA
MAX
2
Full range
IOH = – 100 µA
UNIT
TYP
2
Full range
|VIO| ≤ 5 mV
mV,
MIN
2500
Full range
VIC = 0,
VO = 0,
TLV2422AQ,
TLV2422AM
12
0.5
8
12
3
V/mV
25°C
1000
1000
ri(d)
Differential input
resistance
25°C
1012
1012
Ω
ri(c)
Common-mode input
resistance
25°C
1012
1012
Ω
ci(c)
Common-mode input
capacitance
f = 10 kHz
25°C
8
8
pF
zo
Closed-loop output
impedance
f = 100 kHz,
25°C
130
130
Ω
CMRR
Common-mode
rejection ratio
VIC = VICR min,, VO = 2.5 V,,
RS = 50 Ω
kSVR
Supply-voltage
rejection ratio
(∆VDD/∆VIO)
VDD = 4.4 V to 8 V,,
VIC = VDD /2,
No load
IDD
Supply current
5V
VO = 2
2.5
V,
AV = 10
No load
25°C
70
Full range
70
25°C
80
Full range
80
90
70
90
dB
70
95
80
95
dB
25°C
Full range
80
100
150
175
100
150
175
µA
† Full range is – 40°C to 125°C for Q level part, – 55°C to 125°C for M level part.
‡ Referenced to 2.5 V
NOTE 4: Typical values are based on the input offset voltage shift observed through 500 hours of operating life test at TA = 150°C extrapolated
to TA = 25°C using the Arrhenius equation and assuming an activation energy of 0.96 eV.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
13
TLV2422, TLV2422A
Advanced LinCMOS RAIL-TO-RAIL OUTPUT
WIDE-INPUT-VOLTAGE MICROPOWER DUAL OPERATIONAL AMPLIFIERS
SLOS199C – SEPTEMBER1997 – REVISED APRIL 2001
operating characteristics at specified free-air temperature, VDD = 5 V
PARAMETER
SR
TEST CONDITIONS
VO = 1
1.5
5 V to 3
3.5
5V
V,
CL = 100 pF
F‡
Slew rate at unity gain
Vn
Equivalent input noise voltage
VN(PP)
Peak to peak equivalent input noise voltage
Peak-to-peak
In
Equivalent input noise current
THD + N
Total harmonic distortion plus noise
RL = 10 kه,
Full
range
0 008
0.008
25°C
18
f = 0.1 Hz to 1 Hz
25°C
1.9
f = 0.1 Hz to 10 Hz
25°C
2.8
25°C
0.6
RL =10 kه,
BOM
Maximum output-swing bandwidth
VO(PP) = 2 V,
RL = 10 kه,
AV = 1,
CL = 100 pF‡
Settling time
AV = – 1,
Step = 1.5 V to 3.5 V,,
RL = 10 kه,
CL = 100 pF‡
0 1%
To 0.1%
ts
‡
RL = 10 kه,
CL = 100 pF‡
POST OFFICE BOX 655303
nV/√Hz
µV
fA√Hz
0.24%
1.7%
25°C
52
kHz
25°C
5.3
kHz
85
8.5
µs
25°C
To 0.01%
0 01%
• DALLAS, TEXAS 75265
MAX
25°C
AV = 10
† Full range is – 40°C to 125°C for Q level part, – 55°C to 125°C for M level part.
‡ Referenced to 2.5 V
UNIT
V/µs
f = 1 kHz
f = 10 kHz,
CL = 100 pF‡
14
0.02
100
Gain-bandwidth product
Gain margin
TYP
0.01
25°C
AV = 1
Phase margin at unity gain
MIN
25°C
f = 10 Hz
VO = 1.5 V to 3.5 V,
f = 1 kHz
kHz,
RL = 10 kه
φm
TA†
TLV2422Q,
TLV2422M,
TLV2422AQ,
TLV2422AM
15 5
15.5
25°C
66°
25°C
11
dB
TLV2422, TLV2422A
Advanced LinCMOS RAIL-TO-RAIL OUTPUT
WIDE-INPUT-VOLTAGE MICROPOWER DUAL OPERATIONAL AMPLIFIERS
SLOS199C – SEPTEMBER1997 – REVISED APRIL 2001
TYPICAL CHARACTERISTICS
Table of Graphs
FIGURE
VIO
Input offset voltage
Distribution
vs Common-mode input voltage
2,3
,
4,5
αVIO
IIB/IIO
Input offset voltage temperature coefficient
Distribution
6,7
Input bias and input offset currents
vs Free-air temperature
VOH
VOL
High-level output voltage
vs High-level output current
9,11
Low-level output voltage
vs Low-level output current
10,12
VO(PP)
Maximum peak-to-peak output voltage
vs Frequency
13
IOS
Short circuit output current
Short-circuit
vs Supplyy voltage
g
vs Free-air temperature
14
15
VID
Differential input voltage
vs Output voltage
16,17
Differential gain
vs Load resistance
18
Large-signal differential voltage amplification
Differential voltage amplification
vs Frequency
q
y
vs Free-air temperature
19,20
,
21,22
zo
Output impedance
vs Frequency
23,24
CMRR
Common mode rejection ratio
Common-mode
vs Frequency
q
y
vs Free-air temperature
25
26
kSVR
Supply voltage rejection ratio
Supply-voltage
vs Frequency
q
y
vs Free-air temperature
27,28
,
29
IDD
Supply current
vs Supply voltage
30
SR
Slew rate
vs Load capacitance
vs Free-air temperature
31
32
VO
VO
Inverting large-signal pulse response
33,34
Voltage-follower large-signal pulse response
35,36
VO
VO
Inverting small-signal pulse response
37,38
Vn
Equivalent input noise voltage
vs Frequency
Noise voltage (referred to input)
Over a 10-second period
Total harmonic distortion plus noise
vs Frequency
Gain bandwidth product
Gain-bandwidth
vs Supply
y voltage
g
vs Free-air temperature
Phase margin
vs Frequency
q
y
vs Load capacitance
19,20
,
48
Gain margin
vs Load capacitance
49
Unity-gain bandwidth
vs Load capacitance
50
AVD
THD + N
φm
B1
Voltage-follower small-signal pulse response
POST OFFICE BOX 655303
8
39,40
• DALLAS, TEXAS 75265
41, 42
43
44,45
46
47
15
TLV2422, TLV2422A
Advanced LinCMOS RAIL-TO-RAIL OUTPUT
WIDE-INPUT-VOLTAGE MICROPOWER DUAL OPERATIONAL AMPLIFIERS
SLOS199C – SEPTEMBER1997 – REVISED APRIL 2001
TYPICAL CHARACTERISTICS
DISTRIBUTION OF TLV2422
INPUT OFFSET VOLTAGE
DISTRIBUTION OF TLV2422
INPUT OFFSET VOLTAGE
18
20
Percentage of Amplifiers – %
16
14
Percentage of Amplifiers – %
452 Amplifiers from 1 Wafer Lot
VDD = 3 V
RL = 10 kΩ
TA = 25°C
12
10
8
6
4
454 Amplifiers from 1 Wafer Lot
VDD = 5 V
RL = 10 kΩ
TA = 25°C
15
10
5
2
0
0
–0.4 –0.3 –0.2 –0.1 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7
–0.4 –0.3 –0.2 –0.1 0
VIO – Input Offset Voltage – mV
Figure 2
Figure 3
INPUT OFFSET VOLTAGE
vs
COMMON-MODE INPUT VOLTAGE
INPUT OFFSET VOLTAGE
vs
COMMON-MODE INPUT VOLTAGE
2
2
VDD = 3 V
VDD = 5 V
1.5
VIO – Input Offset Voltage – mV
VIO – Input Offset Voltage – mV
1.5
1
0.5
0
–0.5
–1
–1.5
–2
–0.5
1
0.5
0
–0.5
–1
–1.5
0
0.5
1
1.5
2
2.5
3
VIC – Common-Mode Input Voltage – V
–2
–0.5
0
0.5
1
1.5
2
2.5
Figure 5
POST OFFICE BOX 655303
3
3.5
4
4.5
VIC – Common-Mode Input Voltage – V
Figure 4
16
0.1 0.2 0.3 0.4 0.5 0.6
VIO – Input Offset Voltage – mV
• DALLAS, TEXAS 75265
5
TLV2422, TLV2422A
Advanced LinCMOS RAIL-TO-RAIL OUTPUT
WIDE-INPUT-VOLTAGE MICROPOWER DUAL OPERATIONAL AMPLIFIERS
SLOS199C – SEPTEMBER1997 – REVISED APRIL 2001
TYPICAL CHARACTERISTICS
DISTRIBUTION OF TLV2422 INPUT OFFSET
VOLTAGE TEMPERATURE COEFFICIENT
DISTRIBUTION OF TLV2422 INPUT OFFSET
VOLTAGE TEMPERATURE COEFFICIENT
25
32 Amplifiers From 1 Wafer Lot
VDD = ± 1.5 V
TA = 25°C to 125°C
20
15
10
5
0
–4
32 Amplifiers From 1 Wafer Lot
VDD = ± 2.5 V
TA = 25°C to 125°C
20
Percentage of Amplifiers – %
Percentage of Amplifiers – %
25
2
3
–3
–2
–1
0
1
αVIO – Temperature Coefficient – µV / °C
15
10
5
0
4
–4
2
3
–3
–2
–1
0
1
αVIO – Temperature Coefficient – µV / °C
Figure 7
HIGH-LEVEL OUTPUT VOLTAGE
vs
HIGH-LEVEL OUTPUT CURRENT
INPUT BIAS AND INPUT OFFSET CURRENTS
vs
FREE-AIR TEMPERATURE
3
200
VDD = ± 2.5 V
VDD = 3 V
VOH – High-Level Output Voltage – V
I IB and I IO – Input Bias and Input Offset Currents – pA
Figure 6
4
160
120
IIB
80
40
2.5
TA = 85°C
2
TA = 0°C
1.5
TA = 125°C
1
TA = 25°C
0.5
IIO
0
–55
0
–40
0
25
70
85
125
TA – Free-Air Temperature – °C
0
3
6
9
12
15
IOH – High-Level Output Current – mA
Figure 8
Figure 9
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
17
TLV2422, TLV2422A
Advanced LinCMOS RAIL-TO-RAIL OUTPUT
WIDE-INPUT-VOLTAGE MICROPOWER DUAL OPERATIONAL AMPLIFIERS
SLOS199C – SEPTEMBER1997 – REVISED APRIL 2001
TYPICAL CHARACTERISTICS
LOW-LEVEL OUTPUT VOLTAGE
vs
LOW-LEVEL OUTPUT CURRENT
HIGH-LEVEL OUTPUT VOLTAGE
vs
HIGH-LEVEL OUTPUT CURRENT
1.6
5
VDD = 3 V
VDD = 5 V
VOH – High-Level Output Voltage – V
VOL – Low-Level Output Voltage – V
1.4
1.2
TA = 125°C
1
TA = 85°C
0.8
0.6
0.4
TA = 25°C
0.2
TA = –40°C
4
TA = 25°C
3
2
TA = 85°C
1
TA = 125°C
TA = –40°C
0
0
1
2
3
4
0
5
0
IOL – Low-Level Output Current – mA
4
12
8
Figure 10
1
TA = 125°C
0.8
TA = 85°C
0.4
TA = 25°C
TA = –40°C
0
1
2
3
4
5
VO(PP) – Maximum Peak-to-Peak Output Voltage – V
VOH – High-Level Output Voltage – V
VDD = 5 V
0
28
32
36
40
5
RL = 10 kΩ
TA = 25°C
VDD = 5 V
4
3
VDD = 3 V
2
1
0
102
IOL – Low-Level Output Current – mA
103
104
f – Frequency – Hz
Figure 12
18
24
MAXIMUM PEAK-TO-PEAK OUTPUT VOLTAGE
vs
FREQUENCY
1.2
0.2
20
Figure 11
LOW-LEVEL OUTPUT VOLTAGE
vs
LOW-LEVEL OUTPUT CURRENT
0.6
16
IOH – High-Level Output Current – mA
Figure 13
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
105
106
TLV2422, TLV2422A
Advanced LinCMOS RAIL-TO-RAIL OUTPUT
WIDE-INPUT-VOLTAGE MICROPOWER DUAL OPERATIONAL AMPLIFIERS
SLOS199C – SEPTEMBER1997 – REVISED APRIL 2001
TYPICAL CHARACTERISTICS
SHORT-CIRCUIT OUTPUT CURRENT
vs
SUPPLY VOLTAGE
SHORT-CIRCUIT OUTPUT CURRENT
vs
FREE-AIR TEMPERATURE
8
30
VO = VDD/2
VIC = VDD/2
TA = 25°C
20
VID = –100 mV
I OS – Short-Circuit Output Current – mA
I OS – Short-Circuit Output Current – mA
25
15
10
5
0
–5
–10
–15
–20
–25
3
4
5
6
8
7
9
4
2
VDD = 5 V
0
–2
–4
–6
VID = 100 mV
–8
–55
–30
2
6
10
–40
Figure 14
85
125
DIFFERENTIAL INPUT VOLTAGE
vs
OUTPUT VOLTAGE
1000
1000
VDD = 3 V
RL = 10 kΩ
TA = 25°C
VDD = 5 V
RL = 10 kΩ
TA = 25°C
800
VID – Differential Input Voltage – µV
VID – Differential Input Voltage – µV
70
Figure 15
DIFFERENTIAL INPUT VOLTAGE
vs
OUTPUT VOLTAGE
800
25
0
TA – Free-Air Temperature – °C
VDD – Supply Voltage – V
600
400
200
0
–200
–400
–600
–800
600
400
200
0
–200
–400
–600
–800
–1000
0
0.5
1
1.5
2
2.5
3
–1000
0
VO – Output Voltage – V
1
2
3
4
5
VO – Output Voltage – V
Figure 16
Figure 17
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
19
TLV2422, TLV2422A
Advanced LinCMOS RAIL-TO-RAIL OUTPUT
WIDE-INPUT-VOLTAGE MICROPOWER DUAL OPERATIONAL AMPLIFIERS
SLOS199C – SEPTEMBER1997 – REVISED APRIL 2001
TYPICAL CHARACTERISTICS
DIFFERENTIAL GAIN
vs
LOAD RESISTANCE
10000
Differential Gain – V/mV
1000
VID = 5 V
VID = 3 V
100
10
1
10
100
1000
RL – Load Resistance – kΩ
Figure 18
LARGE-SIGNAL DIFFERENTIAL VOLTAGE
AMPLIFICATION AND PHASE MARGIN
vs
FREQUENCY
50
AVD – Large-Signal Differential
Voltage Amplification – dB
30
135
20
PHASE
90
10
45
0
GAIN
–10
0
–20
–30
– 45
–40
–50
103
104
105
f – Frequency – Hz
Figure 19
20
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
– 90
106
φ m – Phase Margin – °
40
180
VDD = 3 V
RL = 10 kΩ
CL = 100 pF
TLV2422, TLV2422A
Advanced LinCMOS RAIL-TO-RAIL OUTPUT
WIDE-INPUT-VOLTAGE MICROPOWER DUAL OPERATIONAL AMPLIFIERS
SLOS199C – SEPTEMBER1997 – REVISED APRIL 2001
TYPICAL CHARACTERISTICS
LARGE-SIGNAL DIFFERENTIAL VOLTAGE
AMPLIFICATION AND PHASE MARGIN
vs
FREQUENCY
60
180
VDD = 5 V
RL = 10 kΩ
CL = 100 pF
AVD – Large-Signal Differential
Voltage Amplification – dB
40
135
PHASE
30
90
20
45
10
0
GAIN
–10
0
–20
φ m – Phase Margin – °
50
– 45
–30
–40
103
104
– 90
106
105
f – Frequency – Hz
Figure 20
DIFFERENTIAL VOLTAGE AMPLIFICATION
vs
FREE-AIR TEMPERATURE
DIFFERENTIAL VOLTAGE AMPLIFICATION
vs
FREE-AIR TEMPERATURE
10000
VDD = 3 V
AVD – Differential Voltage Amplication – V/mV
AVD – Differential Voltage Amplication – V/mV
10000
RL = 1 MΩ
1000
100
RL = 10 kΩ
10
1
–75
–50
–25
0
25
50
75
100
125
VDD = 5 V
RL = 1 MΩ
1000
100
RL = 10 kΩ
10
1
–75
–50
TA – Free-Air Temperature – °C
–25
0
25
50
75
100
125
TA – Free-Air Temperature – °C
Figure 21
Figure 22
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
21
TLV2422, TLV2422A
Advanced LinCMOS RAIL-TO-RAIL OUTPUT
WIDE-INPUT-VOLTAGE MICROPOWER DUAL OPERATIONAL AMPLIFIERS
SLOS199C – SEPTEMBER1997 – REVISED APRIL 2001
TYPICAL CHARACTERISTICS
OUTPUT IMPEDANCE
vs
FREQUENCY
OUTPUT IMPEDANCE
vs
FREQUENCY
1000
1000
AV = 100
AV = 10
z o – Output Impedance – Ω
z o – Output Impedance – Ω
AV = 100
100
AV = 1
10
AV = 10
100
AV = 1
10
VDD = 3 V
TA = 25°C
VDD = 5 V
TA = 25°C
1
102
104
103
1
102
105
f – Frequency – Hz
Figure 24
COMMON-MODE REJECTION RATIO
vs
FREQUENCY
COMMON-MODE REJECTION RATIO
vs
FREE-AIR TEMPERATURE
94
TA = 25°C
CMRR – Common-Mode Rejection Ratio – dB
CMRR – Common-Mode Rejection Ratio – dB
100
80
60
VDD = 5 V
40
VDD = 3 V
20
103
104
105
106
93
92
VDD = 5 V
91
90
VDD = 3 V
89
88
87
86
85
84
–55
–40
f – Frequency – Hz
0
25
70
85
TA – Free-Air Temperature – °C
Figure 25
22
105
f – Frequency – Hz
Figure 23
0
102
104
103
Figure 26
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
125
TLV2422, TLV2422A
Advanced LinCMOS RAIL-TO-RAIL OUTPUT
WIDE-INPUT-VOLTAGE MICROPOWER DUAL OPERATIONAL AMPLIFIERS
SLOS199C – SEPTEMBER1997 – REVISED APRIL 2001
TYPICAL CHARACTERISTICS
SUPPLY-VOLTAGE REJECTION RATIO
vs
FREQUENCY
SUPPLY-VOLTAGE REJECTION RATIO
vs
FREQUENCY
120
VDD = 3 V
TA = 25°C
KSVR – Supply-Voltage Rejection Ratio – dB
KSVR – Supply-Voltage Rejection Ratio – dB
120
100
KSVR+
80
60
KSVR–
40
20
0
101
103
102
104
105
VDD = 5 V
TA = 25°C
100
KSVR+
80
60
KSVR–
40
20
0
101
106
103
102
f – Frequency – Hz
Figure 27
105
106
Figure 28
SUPPLY-VOLTAGE REJECTION RATIO
vs
FREE-AIR TEMPERATURE
SUPPLY CURRENT
vs
SUPPLY VOLTAGE
100
160
VDD = 2.7 V to 8 V
VO = VDD/2
No Load
140
TA = –40°C
98
I DD – Supply Current – µ A
k SVR – Supply-Voltage Rejection Ratio – dB
104
f – Frequency – Hz
96
94
TA = 25°C
120
100
TA = 85°C
80
60
40
92
20
90
–55
–40
0
25
70
85
125
0
0
1
2
TA – Free-Air Temperature – °C
3
4
5
6
7
8
9
10
VDD – Supply Voltage – V
Figure 29
Figure 30
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
23
TLV2422, TLV2422A
Advanced LinCMOS RAIL-TO-RAIL OUTPUT
WIDE-INPUT-VOLTAGE MICROPOWER DUAL OPERATIONAL AMPLIFIERS
SLOS199C – SEPTEMBER1997 – REVISED APRIL 2001
TYPICAL CHARACTERISTICS
SLEW RATE
vs
LOAD CAPACITANCE
SLEW RATE
vs
FREE-AIR TEMPERATURE
0.03
0.025
30
VDD = 3 V
AV = –1
TA = 25°C
SR – Slew Rate – V/ms
SR – Slew Rate – V/µs
25
SR–
0.02
SR+
0.015
0.01
20
15
10
0.005
0
102
VDD = 5 V
RL = 10 kΩ
CL = 100 pF
AV = 1
104
103
105
5
–55
106
–40
CL – Load Capacitance – pF
0
Figure 31
1500
3
1000
2
VO – Output Voltage – mV
VO – Output Voltage – mV
4
500
0
–500
–2000
–1000
VDD = 3 V
RL = 10 kΩ
CL = 100 pF
AV = –1
TA = 25°C
–600
0
0
–1
–2
200
600
1000
–4
–1000
VDD = 5 V
RL = 10 kΩ
CL = 100 pF
AV = –1
TA = 25°C
–600
t – Time – µs
–200
0
200
t – Time – µs
Figure 34
Figure 33
24
125
1
–3
–200
85
INVERTING LARGE-SIGNAL
PULSE RESPONSE
2000
–1500
70
Figure 32
INVERTING LARGE-SIGNAL
PULSE RESPONSE
–1000
25
TA – Free-Air Temperature – °C
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
600
1000
TLV2422, TLV2422A
Advanced LinCMOS RAIL-TO-RAIL OUTPUT
WIDE-INPUT-VOLTAGE MICROPOWER DUAL OPERATIONAL AMPLIFIERS
SLOS199C – SEPTEMBER1997 – REVISED APRIL 2001
TYPICAL CHARACTERISTICS
VOLTAGE-FOLLOWER LARGE-SIGNAL
PULSE RESPONSE
VOLTAGE-FOLLOWER LARGE-SIGNAL
PULSE RESPONSE
2000
1000
1500
VO – Output Voltage – mV
VO – Output Voltage – mV
1500
2000
VDD = 3 V
RL = 10 kΩ
CL = 100 pF
AV = 1
TA = 25°C
500
0
–500
–1000
–1500
1000
500
0
–500
–1000
–1500
–2000
–1000
–600
–200
0
200
600
VDD = 5 V
RL = 10 kΩ
CL = 100 pF
AV = 1
TA = 25°C
–2000
–1000
1000
–600
–200
t – Time – µs
INVERTING SMALL-SIGNAL
PULSE RESPONSE
300
VO – Output Voltage – mV
VO – Output Voltage – mV
1000
400
VDD = 3 V
RL = 10 kΩ
CL = 100 pF
AV = –1
TA = 25°C
100
0
–100
–200
–300
–400
–5
600
INVERTING SMALL-SIGNAL
PULSE RESPONSE
400
200
200
Figure 36
Figure 35
300
0
t – Time – µs
200
VDD = 5 V
RL = 10 kΩ
CL = 100 pF
AV = –1
TA = 25°C
100
0
–100
–200
–300
–4
–3
–2
–1
0
1
2
3
4
5
–400
–5
–4
t – Time – µs
–3
–2
–1
0
1
2
3
4
5
t – Time – µs
Figure 38
Figure 37
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
25
TLV2422, TLV2422A
Advanced LinCMOS RAIL-TO-RAIL OUTPUT
WIDE-INPUT-VOLTAGE MICROPOWER DUAL OPERATIONAL AMPLIFIERS
SLOS199C – SEPTEMBER1997 – REVISED APRIL 2001
TYPICAL CHARACTERISTICS
VOLTAGE-FOLLOWER SMALL-SIGNAL
PULSE RESPONSE
VOLTAGE-FOLLOWER SMALL-SIGNAL
PULSE RESPONSE
400
200
300
VO – Output Voltage – mV
VO – Output Voltage – mV
300
400
VDD = 3 V
RL = 10 kΩ
CL = 100 pF
AV = 1
TA = 25°C
100
0
–100
–200
–300
–400
–5
200
VDD = 5 V
RL = 10 kΩ
CL = 100 pF
AV = 1
TA = 25°C
100
0
–100
–200
–300
–4
–3
–2
–1
0
1
2
3
4
–400
–5
5
–4
–3
–2
t – Time – µs
1
2
3
4
5
Figure 40
EQUIVALENT INPUT NOISE VOLTAGE
vs
FREQUENCY
EQUIVALENT INPUT NOISE VOLTAGE
vs
FREQUENCY
120
120
VDD = 3 V
TA = 25°C
Vn – Equivalent Input Noise Voltage – nV/ Hz
Vn – Equivalent Input Noise Voltage – nV/ Hz
0
t – Time – µs
Figure 39
100
80
60
40
20
0
10
102
103
104
VDD = 5 V
TA = 25°C
100
80
60
40
20
0
10
f – Frequency – Hz
102
103
f – Frequency – Hz
Figure 41
26
–1
Figure 42
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
104
TLV2422, TLV2422A
Advanced LinCMOS RAIL-TO-RAIL OUTPUT
WIDE-INPUT-VOLTAGE MICROPOWER DUAL OPERATIONAL AMPLIFIERS
SLOS199C – SEPTEMBER1997 – REVISED APRIL 2001
TYPICAL CHARACTERISTICS
NOISE VOLTAGE OVER A 10-SECOND PERIOD
1000
Over a 10 Second Period
800
600
VDD = 5 V
f = 0.1 Hz to 10 Hz
TA = 25°C
Noise Voltage – nV
400
200
0
–200
–400
–600
–800
–1000
–1200
0
1
2
3
4
6
5
8
7
10
9
t – Time – s
Figure 43
100
VDD = 3 V
RL = 10 kΩ
TA = 25°C
10
1
AV = 10
AV = 1
0.1
0.01
101
102
103
TOTAL HARMONIC DISTORTION PLUS NOISE
vs
FREQUENCY
THD +N – Total Harmonic Distortion Plus Noise – %
THD +N – Total Harmonic Distortion Plus Noise – %
TOTAL HARMONIC DISTORTION PLUS NOISE
vs
FREQUENCY
104
105
100
VDD = 5 V
RL = 10 kΩ
TA = 25°C
10
1
AV = 10
AV = 1
0.1
0.01
0.001
101
102
103
f – Frequency – Hz
f – Frequency – Hz
Figure 44
Figure 45
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
104
105
27
TLV2422, TLV2422A
Advanced LinCMOS RAIL-TO-RAIL OUTPUT
WIDE-INPUT-VOLTAGE MICROPOWER DUAL OPERATIONAL AMPLIFIERS
SLOS199C – SEPTEMBER1997 – REVISED APRIL 2001
TYPICAL CHARACTERISTICS
GAIN-BANDWIDTH PRODUCT
vs
SUPPLY VOLTAGE
GAIN-BANDWIDTH PRODUCT
vs
FREE-AIR TEMPERATURE
80
80
RL = 10 kΩ
CL = 100 pF
f = 10 kHz
TA = 25°C
Gain-Bandwidth Product – kHz
Gain-Bandwidth Product – kHz
70
VDD = 5 V
RL = 10 kΩ
CL = 100 pF
f = 10 kHz
70
60
50
40
30
60
50
40
30
20
10
20
3
5
4
6
7
0
–50
8
0
–25
25
50
Figure 46
GAIN MARGIN
vs
LOAD CAPACITANCE
120
40
RL = 10 kΩ
TA = 25°C
Rnull = 500
100
RL = 10 kΩ
TA = 25°C
Rnull = 500
Rnull = 1000
30
80
Gain Margin – dB
φ m – Phase Margin – °
125
Figure 47
PHASE MARGIN
vs
LOAD CAPACITANCE
60
40
Rnull = 1000
Rnull = 200
20
Rnull = 100
Rnull = 200
10
Rnull = 100
20
Rnull = 0
Rnull = 0
0
10
102
103
104
105
0
10
CL – Load Capacitance – pF
102
103
Figure 49
POST OFFICE BOX 655303
104
CL – Load Capacitance – pF
Figure 48
28
100
75
TA – Free-Air Temperature – °C
VDD – Supply Voltage – V
• DALLAS, TEXAS 75265
105
TLV2422, TLV2422A
Advanced LinCMOS RAIL-TO-RAIL OUTPUT
WIDE-INPUT-VOLTAGE MICROPOWER DUAL OPERATIONAL AMPLIFIERS
SLOS199C – SEPTEMBER1997 – REVISED APRIL 2001
TYPICAL CHARACTERISTICS
UNITY-GAIN BANDWIDTH
vs
LOAD CAPACITANCE
B1 – Unity-Gain Bandwidth – kHz
60
50
40
30
20
10
0
10
102
103
104
105
CL – Load Capacitance – pF
Figure 50
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
29
TLV2422, TLV2422A
Advanced LinCMOS RAIL-TO-RAIL OUTPUT
WIDE-INPUT-VOLTAGE MICROPOWER DUAL OPERATIONAL AMPLIFIERS
SLOS199C – SEPTEMBER1997 – REVISED APRIL 2001
MECHANICAL DATA
D (R-PDSO-G**)
PLASTIC SMALL-OUTLINE PACKAGE
14 PIN SHOWN
0.050 (1,27)
0.020 (0,51)
0.014 (0,35)
14
0.010 (0,25) M
8
0.008 (0,20) NOM
0.244 (6,20)
0.228 (5,80)
0.157 (4,00)
0.150 (3,81)
Gage Plane
0.010 (0,25)
1
7
0°– 8°
A
0.044 (1,12)
0.016 (0,40)
Seating Plane
0.069 (1,75) MAX
0.010 (0,25)
0.004 (0,10)
PINS **
0.004 (0,10)
8
14
16
A MAX
0.197
(5,00)
0.344
(8,75)
0.394
(10,00)
A MIN
0.189
(4,80)
0.337
(8,55)
0.386
(9,80)
DIM
4040047 / D 10/96
NOTES: A.
B.
C.
D.
30
All linear dimensions are in inches (millimeters).
This drawing is subject to change without notice.
Body dimensions do not include mold flash or protrusion, not to exceed 0.006 (0,15).
Falls within JEDEC MS-012
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
TLV2422, TLV2422A
Advanced LinCMOS RAIL-TO-RAIL OUTPUT
WIDE-INPUT-VOLTAGE MICROPOWER DUAL OPERATIONAL AMPLIFIERS
SLOS199C – SEPTEMBER1997 – REVISED APRIL 2001
MECHANICAL DATA
FK (S-CQCC-N**)
LEADLESS CERAMIC CHIP CARRIER
28 TERMINAL SHOWN
18
17
16
15
14
13
NO. OF
TERMINALS
**
12
19
11
20
10
A
B
MIN
MAX
MIN
MAX
20
0.342
(8,69)
0.358
(9,09)
0.307
(7,80)
0.358
(9,09)
28
0.442
(11,23)
0.458
(11,63)
0.406
(10,31)
0.458
(11,63)
21
9
22
8
44
0.640
(16,26)
0.660
(16,76)
0.495
(12,58)
0.560
(14,22)
23
7
52
0.739
(18,78)
0.761
(19,32)
0.495
(12,58)
0.560
(14,22)
24
6
68
25
5
0.938
(23,83)
0.962
(24,43)
0.850
(21,6)
0.858
(21,8)
84
1.141
(28,99)
1.165
(29,59)
1.047
(26,6)
1.063
(27,0)
B SQ
A SQ
26
27
28
1
2
3
4
0.080 (2,03)
0.064 (1,63)
0.020 (0,51)
0.010 (0,25)
0.020 (0,51)
0.010 (0,25)
0.055 (1,40)
0.045 (1,14)
0.045 (1,14)
0.035 (0,89)
0.045 (1,14)
0.035 (0,89)
0.028 (0,71)
0.022 (0,54)
0.050 (1,27)
4040140 / D 10/96
NOTES: A.
B.
C.
D.
E.
All linear dimensions are in inches (millimeters).
This drawing is subject to change without notice.
This package can be hermetically sealed with a metal lid.
The terminals are gold plated.
Falls within JEDEC MS-004
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
31
TLV2422, TLV2422A
Advanced LinCMOS RAIL-TO-RAIL OUTPUT
WIDE-INPUT-VOLTAGE MICROPOWER DUAL OPERATIONAL AMPLIFIERS
SLOS199C – SEPTEMBER1997 – REVISED APRIL 2001
MECHANICAL DATA
JG (R-GDIP-T8)
CERAMIC DUAL-IN-LINE PACKAGE
0.400 (10,20)
0.355 (9,00)
8
5
0.280 (7,11)
0.245 (6,22)
1
4
0.065 (1,65)
0.045 (1,14)
0.310 (7,87)
0.290 (7,37)
0.020 (0,51) MIN
0.200 (5,08) MAX
Seating Plane
0.130 (3,30) MIN
0.063 (1,60)
0.015 (0,38)
0.100 (2,54)
0°–15°
0.023 (0,58)
0.015 (0,38)
0.014 (0,36)
0.008 (0,20)
4040107/C 08/96
NOTES: A.
B.
C.
D.
E.
32
All linear dimensions are in inches (millimeters).
This drawing is subject to change without notice.
This package can be hermetically sealed with a ceramic lid using glass frit.
Index point is provided on cap for terminal identification on press ceramic glass frit seal only.
Falls within MIL-STD-1835 GDIP1-T8
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
TLV2422, TLV2422A
Advanced LinCMOS RAIL-TO-RAIL OUTPUT
WIDE-INPUT-VOLTAGE MICROPOWER DUAL OPERATIONAL AMPLIFIERS
SLOS199C – SEPTEMBER1997 – REVISED APRIL 2001
MECHANICAL DATA
PW (R-PDSO-G**)
PLASTIC SMALL-OUTLINE PACKAGE
14 PIN SHOWN
0,30
0,19
0,65
14
0,10 M
8
0,15 NOM
4,50
4,30
6,60
6,20
Gage Plane
0,25
1
7
0°– 8°
0,75
0,50
A
Seating Plane
0,15
0,05
1,20 MAX
0,10
PINS **
8
14
16
20
24
28
A MAX
3,10
5,10
5,10
6,60
7,90
9,80
A MIN
2,90
4,90
4,90
6,40
7,70
9,60
DIM
4040064 / E 08/96
NOTES: A.
B.
C.
D.
All linear dimensions are in millimeters.
This drawing is subject to change without notice.
Body dimensions do not include mold flash or protrusion not to exceed 0,15.
Falls within JEDEC MO-153
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
33
TLV2422, TLV2422A
Advanced LinCMOS RAIL-TO-RAIL OUTPUT
WIDE-INPUT-VOLTAGE MICROPOWER DUAL OPERATIONAL AMPLIFIERS
SLOS199C – SEPTEMBER1997 – REVISED APRIL 2001
MECHANICAL DATA
U (S-GDFP-F10)
CERAMIC DUAL FLATPACK
0.250 (6,35)
0.246 (6,10)
0.006 (0,15)
0.004 (0,10)
0.080 (2,03)
0.050 (1,27)
0.045 (1,14)
0.026 (0,66)
0.300 (7,62)
0.350 (8,89)
0.250 (6,35)
1
0.350 (8,89)
0.250 (6,35)
10
0.019 (0,48)
0.015 (0,38)
0.050 (1,27)
0.250 (6,35)
5
6
0.025 (0,64)
0.005 (0,13)
1.000 (25,40)
0.750 (19,05)
4040179 / B 03/95
NOTES: A.
B.
C.
D.
E.
34
All linear dimensions are in inches (millimeters).
This drawing is subject to change without notice.
This package can be hermetically sealed with a ceramic lid using glass frit.
Index point is provided on cap for terminal identification only.
Falls within MIL STD 1835 GDFP1-F10 and JEDEC MO-092AA
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
PACKAGE OPTION ADDENDUM
www.ti.com
18-Sep-2008
PACKAGING INFORMATION
Orderable Device
Status (1)
Package
Type
Package
Drawing
Pins Package Eco Plan (2)
Qty
5962-9751401Q2A
ACTIVE
LCCC
FK
20
1
TBD
5962-9751401QHA
ACTIVE
CFP
U
10
1
TBD
5962-9751401QPA
ACTIVE
CDIP
JG
8
1
TBD
5962-9751402Q2A
ACTIVE
LCCC
FK
20
1
TBD
5962-9751402QHA
ACTIVE
CFP
U
10
1
TBD
5962-9751402QPA
ACTIVE
CDIP
JG
8
1
TLV2422AID
ACTIVE
SOIC
D
8
75
TLV2422AIDG4
ACTIVE
SOIC
D
8
75
TLV2422AIDR
ACTIVE
SOIC
D
TLV2422AIDRG4
ACTIVE
SOIC
TLV2422AIPWLE
OBSOLETE
TLV2422AIPWR
Lead/Ball Finish
MSL Peak Temp (3)
POST-PLATE N / A for Pkg Type
A42 SNPB
N / A for Pkg Type
A42 SNPB
N / A for Pkg Type
POST-PLATE N / A for Pkg Type
A42 SNPB
N / A for Pkg Type
TBD
A42 SNPB
N / A for Pkg Type
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
8
2500 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
D
8
2500 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TSSOP
PW
8
ACTIVE
TSSOP
PW
8
2000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TLV2422AIPWRG4
ACTIVE
TSSOP
PW
8
2000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TLV2422AMFKB
ACTIVE
LCCC
FK
20
1
TBD
TLV2422AMJGB
ACTIVE
CDIP
JG
8
1
TBD
A42 SNPB
N / A for Pkg Type
TLV2422AMUB
ACTIVE
CFP
U
10
1
TBD
A42 SNPB
N / A for Pkg Type
TBD
Call TI
Call TI
POST-PLATE N / A for Pkg Type
TLV2422AQD
ACTIVE
SOIC
D
8
75
TBD
CU NIPDAU
Level-1-220C-UNLIM
TLV2422AQDG4
ACTIVE
SOIC
D
8
75
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TBD
CU NIPDAU
Level-1-220C-UNLIM
CU NIPDAU
Level-1-260C-UNLIM
TLV2422AQDR
ACTIVE
SOIC
D
8
2500
TLV2422AQDRG4
ACTIVE
SOIC
D
8
2500 Green (RoHS &
no Sb/Br)
TLV2422CD
ACTIVE
SOIC
D
8
75
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TLV2422CDG4
ACTIVE
SOIC
D
8
75
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TLV2422CDR
ACTIVE
SOIC
D
8
2500 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TLV2422CDRG4
ACTIVE
SOIC
D
8
2500 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TLV2422CPWR
ACTIVE
TSSOP
PW
8
2000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TLV2422CPWRG4
ACTIVE
TSSOP
PW
8
2000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TLV2422ID
ACTIVE
SOIC
D
8
75
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TLV2422IDG4
ACTIVE
SOIC
D
8
75
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TLV2422IDR
ACTIVE
SOIC
D
8
2500 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TLV2422IDRG4
ACTIVE
SOIC
D
8
2500 Green (RoHS &
CU NIPDAU
Level-1-260C-UNLIM
Addendum-Page 1
PACKAGE OPTION ADDENDUM
www.ti.com
18-Sep-2008
Orderable Device
Status (1)
Package
Type
Package
Drawing
TLV2422IPW
OBSOLETE
TSSOP
PW
Pins Package Eco Plan (2)
Qty
Lead/Ball Finish
MSL Peak Temp (3)
no Sb/Br)
8
TBD
TLV2422IPWR
OBSOLETE
TSSOP
PW
8
TLV2422MFKB
ACTIVE
LCCC
FK
20
1
TBD
TBD
TLV2422MJGB
ACTIVE
CDIP
JG
8
1
TBD
TLV2422MUB
ACTIVE
CFP
U
10
1
TLV2422QD
ACTIVE
SOIC
D
8
75
TLV2422QDG4
ACTIVE
SOIC
D
8
TLV2422QDR
ACTIVE
SOIC
D
TLV2422QDRG4
ACTIVE
SOIC
D
Call TI
Call TI
Call TI
Call TI
POST-PLATE N / A for Pkg Type
A42 SNPB
N / A for Pkg Type
TBD
A42 SNPB
N / A for Pkg Type
TBD
CU NIPDAU
Level-1-220C-UNLIM
75
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
8
2500
TBD
CU NIPDAU
Level-1-220C-UNLIM
8
2500 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
(1)
The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in
a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2)
Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check
http://www.ti.com/productcontent for the latest availability information and additional product content details.
TBD: The Pb-Free/Green conversion plan has not been defined.
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements
for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered
at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and
package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS
compatible) as defined above.
Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame
retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material)
(3)
MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder
temperature.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is
provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the
accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take
reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on
incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited
information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI
to Customer on an annual basis.
OTHER QUALIFIED VERSIONS OF TLV2422, TLV2422A, TLV2422AM, TLV2422M :
• Automotive: TLV2422-Q1, TLV2422A-Q1
NOTE: Qualified Version Definitions:
• Automotive - Q100 devices qualified for high-reliability automotive applications targeting zero defects
Addendum-Page 2
PACKAGE MATERIALS INFORMATION
www.ti.com
11-Mar-2008
TAPE AND REEL INFORMATION
*All dimensions are nominal
Device
Package Package Pins
Type Drawing
SPQ
Reel
Reel
Diameter Width
(mm) W1 (mm)
A0 (mm)
B0 (mm)
K0 (mm)
P1
(mm)
W
Pin1
(mm) Quadrant
TLV2422AIDR
SOIC
D
8
2500
330.0
12.4
6.4
5.2
2.1
8.0
12.0
Q1
TLV2422AIPWR
TSSOP
PW
8
2000
330.0
12.4
7.0
3.6
1.6
8.0
12.0
Q1
TLV2422CDR
SOIC
D
8
2500
330.0
12.4
6.4
5.2
2.1
8.0
12.0
Q1
TLV2422CPWR
TSSOP
PW
8
2000
330.0
12.4
7.0
3.6
1.6
8.0
12.0
Q1
TLV2422IDR
SOIC
D
8
2500
330.0
12.4
6.4
5.2
2.1
8.0
12.0
Q1
Pack Materials-Page 1
PACKAGE MATERIALS INFORMATION
www.ti.com
11-Mar-2008
*All dimensions are nominal
Device
Package Type
Package Drawing
Pins
SPQ
Length (mm)
Width (mm)
Height (mm)
TLV2422AIDR
SOIC
D
8
2500
346.0
346.0
29.0
TLV2422AIPWR
TSSOP
PW
8
2000
346.0
346.0
29.0
TLV2422CDR
SOIC
D
8
2500
346.0
346.0
29.0
TLV2422CPWR
TSSOP
PW
8
2000
346.0
346.0
29.0
TLV2422IDR
SOIC
D
8
2500
346.0
346.0
29.0
Pack Materials-Page 2
MECHANICAL DATA
MLCC006B – OCTOBER 1996
FK (S-CQCC-N**)
LEADLESS CERAMIC CHIP CARRIER
28 TERMINAL SHOWN
18
17
16
15
14
13
NO. OF
TERMINALS
**
12
19
11
20
10
A
B
MIN
MAX
MIN
MAX
20
0.342
(8,69)
0.358
(9,09)
0.307
(7,80)
0.358
(9,09)
28
0.442
(11,23)
0.458
(11,63)
0.406
(10,31)
0.458
(11,63)
21
9
22
8
44
0.640
(16,26)
0.660
(16,76)
0.495
(12,58)
0.560
(14,22)
23
7
52
0.739
(18,78)
0.761
(19,32)
0.495
(12,58)
0.560
(14,22)
24
6
68
0.938
(23,83)
0.962
(24,43)
0.850
(21,6)
0.858
(21,8)
84
1.141
(28,99)
1.165
(29,59)
1.047
(26,6)
1.063
(27,0)
B SQ
A SQ
25
5
26
27
28
1
2
3
4
0.080 (2,03)
0.064 (1,63)
0.020 (0,51)
0.010 (0,25)
0.020 (0,51)
0.010 (0,25)
0.055 (1,40)
0.045 (1,14)
0.045 (1,14)
0.035 (0,89)
0.045 (1,14)
0.035 (0,89)
0.028 (0,71)
0.022 (0,54)
0.050 (1,27)
4040140 / D 10/96
NOTES: A.
B.
C.
D.
E.
All linear dimensions are in inches (millimeters).
This drawing is subject to change without notice.
This package can be hermetically sealed with a metal lid.
The terminals are gold plated.
Falls within JEDEC MS-004
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
MECHANICAL DATA
MTSS001C – JANUARY 1995 – REVISED FEBRUARY 1999
PW (R-PDSO-G**)
PLASTIC SMALL-OUTLINE PACKAGE
14 PINS SHOWN
0,30
0,19
0,65
14
0,10 M
8
0,15 NOM
4,50
4,30
6,60
6,20
Gage Plane
0,25
1
7
0°– 8°
A
0,75
0,50
Seating Plane
0,15
0,05
1,20 MAX
PINS **
0,10
8
14
16
20
24
28
A MAX
3,10
5,10
5,10
6,60
7,90
9,80
A MIN
2,90
4,90
4,90
6,40
7,70
9,60
DIM
4040064/F 01/97
NOTES: A.
B.
C.
D.
All linear dimensions are in millimeters.
This drawing is subject to change without notice.
Body dimensions do not include mold flash or protrusion not to exceed 0,15.
Falls within JEDEC MO-153
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
MECHANICAL DATA
MCER001A – JANUARY 1995 – REVISED JANUARY 1997
JG (R-GDIP-T8)
CERAMIC DUAL-IN-LINE
0.400 (10,16)
0.355 (9,00)
8
5
0.280 (7,11)
0.245 (6,22)
1
0.063 (1,60)
0.015 (0,38)
4
0.065 (1,65)
0.045 (1,14)
0.310 (7,87)
0.290 (7,37)
0.020 (0,51) MIN
0.200 (5,08) MAX
Seating Plane
0.130 (3,30) MIN
0.023 (0,58)
0.015 (0,38)
0°–15°
0.100 (2,54)
0.014 (0,36)
0.008 (0,20)
4040107/C 08/96
NOTES: A.
B.
C.
D.
E.
All linear dimensions are in inches (millimeters).
This drawing is subject to change without notice.
This package can be hermetically sealed with a ceramic lid using glass frit.
Index point is provided on cap for terminal identification.
Falls within MIL STD 1835 GDIP1-T8
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements,
and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should
obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are
sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment.
TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s standard
warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where
mandated by government requirements, testing of all parameters of each product is not necessarily performed.
TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and
applications using TI components. To minimize the risks associated with customer products and applications, customers should provide
adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right,
or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information
published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a
warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual
property of the third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied
by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive
business practice. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional
restrictions.
Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all
express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not
responsible or liable for any such statements.
TI products are not authorized for use in safety-critical applications (such as life support) where a failure of the TI product would reasonably
be expected to cause severe personal injury or death, unless officers of the parties have executed an agreement specifically governing
such use. Buyers represent that they have all necessary expertise in the safety and regulatory ramifications of their applications, and
acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products
and any use of TI products in such safety-critical applications, notwithstanding any applications-related information or support that may be
provided by TI. Further, Buyers must fully indemnify TI and its representatives against any damages arising out of the use of TI products in
such safety-critical applications.
TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products are
specifically designated by TI as military-grade or "enhanced plastic." Only products designated by TI as military-grade meet military
specifications. Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is solely at
the Buyer's risk, and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use.
TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI products are
designated by TI as compliant with ISO/TS 16949 requirements. Buyers acknowledge and agree that, if they use any non-designated
products in automotive applications, TI will not be responsible for any failure to meet such requirements.
Following are URLs where you can obtain information on other Texas Instruments products and application solutions:
Products
Amplifiers
Data Converters
DSP
Clocks and Timers
Interface
Logic
Power Mgmt
Microcontrollers
RFID
RF/IF and ZigBee® Solutions
amplifier.ti.com
dataconverter.ti.com
dsp.ti.com
www.ti.com/clocks
interface.ti.com
logic.ti.com
power.ti.com
microcontroller.ti.com
www.ti-rfid.com
www.ti.com/lprf
Applications
Audio
Automotive
Broadband
Digital Control
Medical
Military
Optical Networking
Security
Telephony
Video & Imaging
Wireless
www.ti.com/audio
www.ti.com/automotive
www.ti.com/broadband
www.ti.com/digitalcontrol
www.ti.com/medical
www.ti.com/military
www.ti.com/opticalnetwork
www.ti.com/security
www.ti.com/telephony
www.ti.com/video
www.ti.com/wireless
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2008, Texas Instruments Incorporated
工商网监
湘ICP备2023018690号
