0
登录后你可以
  • 下载海量资料
  • 学习在线课程
  • 观看技术视频
  • 写文章/发帖/加入社区
会员中心
创作中心
发布
  • 发文章

  • 发资料

  • 发帖

  • 提问

  • 发视频

创作活动
TLV2632IDGKR

TLV2632IDGKR

  • 厂商:

    BURR-BROWN(德州仪器)

  • 封装:

    TSSOP8

  • 描述:

    IC OPAMP GP 2 CIRCUIT 8VSSOP

  • 详情介绍
  • 数据手册
  • 价格&库存
TLV2632IDGKR 数据手册
       SLOS362A − JUNE 2001 − REVISED JANUARY 2005                  FEATURES D Rail-To-Rail Output D VICR Includes Ground D Gain-Bandwidth Product . . . 9 MHz D Supply Current . . . 730 µA/Channel D Single, Duals, and Quad Versions D Ultralow Power Down Mode D D D D DESCRIPTION The TLV263x single supply operational amplifiers provide rail-to-rail output with an input range that includes ground. The TLV263x takes the minimum operating supply voltage down to 2.7 V over the extended industrial temperature range (−40°C to 125°C) while adding the rail-to-rail output swing feature. The TLV263x also provides a 9 MHz gain-bandwidth product from only 730 µA of supply current. The maximum recommended supply voltage is 5.5 V, which, when coupled with a 2.7-V minimum, allows the devices to be operated from lithium ion cells. IDD(SHDN) = 4 µA/Channel Specified Temperature Range −40°C to 125°C . . . Industrial Grade Supply Voltage Range . . . 2.7 V to 5.5 V Ultrasmall Packaging 5 or 6 Pin SOT-23 (TLV2630/1) 8 or 10 Pin MSOP (TLV2632/3) Universal Op-Amp EVM (See SLOU060 for More Information) The combination of wide bandwidth, low noise, and low distortion makes it ideal for high speed and high resolution data converter applications. The ground input range allows it to directly interface to ground rail referred systems. All members are available in PDIP and SOIC with the singles in the small SOT-23 package, duals in the MSOP, and quads in the TSSOP package. Operational Amplifier + The 2.7-V operation makes it compatible with Li-Ion powered systems and the operating supply voltage range of many micro-power microcontrollers available today including TI’s MSP430. − AMPLIFIER SELECTION TABLE VDD [V] IDD/ch [µA] VICR [V] GBW [MHz] SLEW RATE [V/µs] Vn, 1 kHz [nV/√Hz] IO [mA] 2.5−5.5 850 −0.3 to VDD + 0.3 5.5 6 25 40 OPAx743 3.5−12 1100 −0.1 to VDD + 0.1 7 10 30 20 TLV278x 1.8−3.6 650 −0.2 to VDD + 0.2 8 5 9 10 TLV263x 2.7−5.5 730 GND to VDD − 1 9 9.5 50 28 TLV262x 2.7−5.5 750 1 V to VDD + 0.2 11 10 27 28 OPAx353 2.7−5.5 8000 −0.1 to VDD + 0.1 44 22 7 40 DEVICE OPAx343 Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.    !"#$%&'#! ( )*$$+!' &( #" ,*-.)&'#! /&'+0 $#/*)'( )#!"#$% '# (,+)")&'#!( ,+$ '1+ '+$%( #" +2&( !('$*%+!'( ('&!/&$/ 3&$$&!'40 $#/*)'#! ,$#)+((!5 /#+( !#' !+)+((&$.4 !).*/+ '+('!5 #" &.. ,&$&%+'+$(0 Copyright  2001−2005, Texas Instruments Incorporated www.ti.com 1        SLOS362A − JUNE 2001 − REVISED JANUARY 2005 PACKAGE/ORDERING INFORMATION(1) PRODUCT PACKAGE CODE SYMBOL SOIC−8 D — SOT−23−6 DBV VAYI DIP−8 P SOIC−8 PACKAGE SPECIFIED TEMPERATURE RANGE ORDER NUMBER TRANSPORT MEDIA TLV2630ID TLV2630IDR Tube Tape and Reel TLV2630IDBVR† TLV2630IDBVT‡ Tape and Reel — TLV2630IP Tube D — TLV2631ID TLV2631IDR Tube Tape and Reel SOT−23−5 DBV VAZI TLV2631IDBVR† TLV2631IDBVT‡ Tape and Reel DIP−8 P — TLV2631IP Tube TLV2632ID TLV2632IDR Tube Tape and Reel TLV2632IDGK TLV2632IDGKR Tube Tape and Reel Single with Shutdown TLV2630ID TLV2630IDBV TLV2630IP −40°C to 125°C Single without Shutdown TLV2631ID TLV2631IDBV TLV2631IP −40°C to 125°C Dual without Shutdown TLV2632ID SOIC−8 D — TLV2632IDGK MSOP−8 DGK AKG DIP−8 P — TLV2632IP Tube TLV2633ID TLV2633IDR Tube Tape and Reel TLV2633IDGS TLV2633IDGSR Tube Tape and Reel TLV2632IP −40°C to 125°C Dual with Shutdown TLV2633ID SOIC−14 D — TLV2633IDGS MSOP−10 DGS AKK DIP−14 N — TLV2633IN Tube TLV2634ID TLV2634IDR Tube Tape and Reel TLV2633IN −40°C to 125°C Quad without Shutdown TLV2634ID SOIC−14 D — TLV2634IN DIP−14 N — TLV2634IPW TSSOP−14 −40°C 125°C −40 C to 125 C TLV2634IN Tube Tube Tape and Reel PW — TLV2634IPW TLV2634IPWR TLV2635ID TLV2635IDR Tube Tape and Reel TLV2635IN Tube TLV2635IPW TLV2635IPWR Tube Tape and Reel Quad with Shutdown TLV2635ID SOIC−16 D — TLV2635IN DIP−16 N — TLV2635IPW TSSOP−16 PW −40°C −40 C to 125 125°C C — † The SOT23 package devices are only available taped and reeled. The R Suffix denotes quantities (3,000 pieces per reel). ‡ The T Suffix denotes smaller quantities (250 pieces per mini-reel). 1. For the most current package and ordering information, see the Package Option Addendum at the end of this document, or see the TI website at www.ti.com. 2 www.ti.com        SLOS362A − JUNE 2001 − REVISED JANUARY 2005 absolute maximum ratings over operating free-air temperature range (unless otherwise noted)† Supply voltage, VDD (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 V Differential input voltage, VID . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±VDD Input voltage range, VI (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GND to VDD − 1 V Input current, II (any input) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ± 10 mA Output current, IO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ± 40 mA Continuous total power dissipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . See Dissipation Rating Table Operating free-air temperature range, TA: I-suffix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −40°C to 125°C Maximum junction temperature, TJ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150°C Storage temperature range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −65°C to 150°C Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 260°C † Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. NOTE 2: All voltage values, except differential voltages, are with respect to GND. recommended operating conditions MIN MAX 2.7 5.5 ±1.35 ±2.75 GND VDD−1 125 Single supply Supply voltage, VDD Split supply Common-mode input voltage range, VICR Operating free-air temperature, TA I-suffix Shutdown on/off voltage level‡ VIL VIH −40 0.4 2 UNIT V V °C V ‡ Relative to GND. electrical characteristics at specified free-air temperature, VDD = 2.7 V, 5 V (unless otherwise noted) dc performance PARAMETER TEST CONDITIONS TA 25°C MIN TYP MAX 250 3500 Full range VIO αVIO Input offset voltage VIC = VDD/2, VO = VDD/2 25°C TLV2634/5 Temperature coefficient of input offset voltage VIC = GND to VDD−1 V VDD = 5 V AVD Large-signal differential voltage amplification 250 Full range RL = 2 kΩ, VO(PP) = VDD−1 V www.ti.com 4200 5200 25°C VDD = 2.7 V CMRR Common-mode rejection ratio 4500 3 25°C 76 Full range 67 25°C 77 Full range 74 25°C 90 Full range 82 UNIT µV V V µV µV/°C 100 100 dB 100 dB 3        SLOS362A − JUNE 2001 − REVISED JANUARY 2005 electrical characteristics at specified free-air temperature, VDD = 2.7 V, 5 V (unless otherwise noted) (continued) input characteristics PARAMETER TEST CONDITIONS TA† MIN 25°C IIO Input offset current IIB Input bias current ri(d) Differential input resistance TYP MAX 1 50 Full range VIC = VDD/2, VO = VDD/2 100 25°C 1 Full range Ci(c) Common-mode input capacitance † Full range is −40°C to 125°C for the I-suffix. f = 1 kHz UNIT 50 pA 200 25°C 1000 GΩ 25°C 12 pF output characteristics PARAMETER TEST CONDITIONS MIN TYP 2.67 25°C 2.6 VDD = 2.7 V Full range 2.55 25°C 4.92 VDD = 5 V Full range 4.9 25°C 2.25 Full range 2.15 VIC = VDD/2, IOH = − 1 mA VOH TA† High-level output voltage VDD = 2.7 V VIC = VDD/2, IOH = − 10 mA 25°C 4.7 VDD = 5 V Full range 4.65 VDD = 2.7 V Full range VDD = 5 V Full range 25°C VIC = VDD/2, IOL = 1 mA VOL VIC = VDD/2, IOL = 10 mA IO IOS Output current VDD = 2.7 V, VO = 0.5 V from rail Sourcing VDD = 5 V, VO = 0.5 V from rail Sourcing 4.8 0.025 0.08 0.26 0.45 Full range mV 0.47 0.2 Full range 0.3 0.35 14 Sinking 19 25°C mA 28 Sinking 28 50 Sourcing VDD = 2.7 V VDD = 5 V Sinking VDD = 2.7 V VDD = 5 V Short-circuit output current 0.1 0.1 25°C VDD = 5 V V 2.43 0.15 25°C VDD = 2.7 V UNIT 4.98 0.03 25°C Low-level output voltage MAX 95 25°C mA 50 95 † Full range is −40°C to 125°C for the I-suffix. power supply PARAMETER TEST CONDITIONS IDD Supply current (per channel) VO = VDD/2, SHDN = VDD PSRR Supply voltage rejection ratio (∆VDD /∆VIO) VDD = 2.7 V to 5.5 V, VIC = VDD /2 No load † Full range is −40°C to 125°C for the I-suffix. 4 www.ti.com TA† 25°C MIN TYP MAX 730 1000 Full range 1350 25°C 70 Full range 65 UNIT A µA 90 dB        SLOS362A − JUNE 2001 − REVISED JANUARY 2005 electrical characteristics at specified free-air temperature, VDD = 2.7 V, 5 V (unless otherwise noted) (continued) dynamic performance PARAMETER GBWP SR+ SR− φm Gain-bandwidth product Positive slew rate at unity gain Negative slew rate at unity gain TA† TEST CONDITIONS RL = 2 kΩ, CL = 10 pF, RL = 2 kΩ kΩ, CL = 50 pF RL = 2 kΩ kΩ, CL = 50 pF MIN 9 VDD = 2.7 V, VO(PP) = 1.7 V 6 VDD = 5 V, VO(PP) = 3.5 V 6 VDD = 2.7 V, VO(PP) = 1.7 V RL = 2 kΩ, MAX UNIT MHz V/ s V/µs 25°C VDD = 5 V, VO(PP) = 3.5 V Phase margin Gain margin TYP f = 10 kHz CL = 10 pF 10 V/µs 9.5 V/µs 50 ° 20 dB † Full range is −40°C to 125°C for the I-suffix. noise/distortion performance PARAMETER THD + N Total harmonic distortion plus noise TEST CONDITIONS VO(PP) = VDD/2, RL = 2 kΩ, f = 10 kHz Equivalent input noise voltage In Equivalent input noise current MIN TYP 0.003% AV = 100 0.095% f = 1 kHz Vn TA AV = 1 AV = 10 MAX UNIT 0.02% 25°C 50 f = 10 kHz 30 f = 1 kHz 0.9 nV/√Hz fA /√Hz shutdown characteristics PARAMETER IDD(SHDN) Supply current, per channel in shutdown mode (TLV2630, TLV2633, TLV2635) t(on) Amplifier turnon time‡ TEST CONDITIONS SHDN = 0.4 V kΩ RL = 2 kΩ, CL = 10 pF TA† 25°C MIN TYP MAX 4 17 Full range VDD = 2.7 V VDD = 5 V 19 4.5 25°C 25 C 1.5 UNIT µA A µss t(off) Amplifier turnoff time‡ 200 ns † Full range is −40°C to 125°C for the I-suffix. ‡ Disable time and enable time are defined as the interval between application of the logic signal to SHDN and the point at which the supply current has reached half its final value. www.ti.com 5        SLOS362A − JUNE 2001 − REVISED JANUARY 2005 DISSIPATION RATING TABLE PACKAGE ΘJC (°C/W) ΘJA (°C/W) TA ≤ 25°C 25 C POWER RATING D (8) 38.3 176 710 mW 142 mW D (14) 26.9 122.3 1022 mW 204.4 mW D (16) 25.7 114.7 1090 mW 218 mW DBV (5) 55 324.1 385 mW 77.1 mW 125°C TA = 125 C POWER RATING DBV (6) 55 294.3 425 mW 85 mW DGK (8) 54.2 259.9 481 mW 96.1 mW DGS (10) 54.1 259.7 485 mW 97 mW N (14, 16) 32 78 1600 mW 320.5 mW P (8) 41 104 1200 mW 240.4 mW PW (14) 29.3 173.6 720 mW 144 mW PW (16) 28.7 161.4 774 mW 154.9 mW TYPICAL CHARACTERISTICS Table of Graphs FIGURE VIO CMRR Input offset voltage vs Common-mode input voltage Common-mode rejection ratio vs Frequency VOH VOL High-level output voltage vs High-level output current 4, 6 Low-level output voltage vs Low-level output current 5, 7 IDD IDD Supply current vs Supply voltage 8 Supply current vs Free-air temperature 9 PSRR Power supply rejection ratio vs Frequency 10 AVD Differential voltage amplification & phase vs Frequency 11 vs Supply voltage 12 vs Free-air temperature 13 vs Supply voltage 14 Gain-bandwidth product 1, 2 3 SR Slew rate φm Vn Phase margin vs Load capacitance 17 Equivalent input noise voltage vs Frequency 18 Crosstalk vs Frequency 19 vs Free-air temperature Voltage-follower large-signal pulse response 15, 16 20 Voltage-follower small-signal pulse response 21 IDD(SHDN) IDD(SHDN) Shutdown supply current vs Free-air temperature 22 Shutdown supply current vs Supply voltage 23 IDD(SHDN) Shutdown supply current/output voltage vs Time 24 6 www.ti.com        SLOS362A − JUNE 2001 − REVISED JANUARY 2005 INPUT OFFSET VOLTAGE vs COMMON-MODE INPUT VOLTAGE INPUT OFFSET VOLTAGE vs COMMON-MODE INPUT VOLTAGE 1200 VDD = 2.7 V TA = 25° C 1000 VIO − Input Offset Voltage − µ V 800 600 400 200 0 −200 −0.3 0 0.3 0.6 0.9 1.2 1.5 1.8 2.1 2.4 2.7 VDD = 5 V TA = 25° C 1000 800 600 400 200 0 −200 −0.5 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 VICR − Common-Mode Input Voltage − V Figure 1 1.8 TA = 125°C TA = 70°C 0.9 TA = 25°C TA = 0°C TA = −40°C 0.3 0.0 5 10 15 20 25 2.1 TA = 125°C 1.8 TA = 70°C 1.5 0.9 0.6 0.3 30 35 40 45 1100 TA = 125°C TA = 70°C TA = 25°C TA = 0°C TA = −40°C 2.0 1.5 1.0 0.5 I DD − Supply Current − µ A/ch 1000 4.0 5 10 15 20 25 30 35 40 45 20 10 0 10 900 10 20 30 40 50 60 70 80 90 100 IOL − Low-Level Output Current − mA 1k 10k 100k f − Frequency − Hz 1M VDD = 5 V 4.5 4.0 3.5 TA = 125°C 3.0 TA = 70°C 2.5 2.0 TA = 25°C TA = 0°C TA = −40°C 1.5 1.0 0.5 TA = 25°C 700 600 500 TA = −40°C TA = 0°C 300 200 10 20 30 40 50 60 70 80 90 100 1100 AV= 1 VIC = VDD/2 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 5.5 6 VDD − Supply Voltage − V Figure 8 www.ti.com SUPPLY CURRENT vs FREE-AIR TEMPERATURE 1000 TA = 70°C 800 400 100 Figure 6 0 0.0 Figure 7 30 IOH − High-Level Output Current − mA TA = 125°C 100 0 40 0 SUPPLY CURRENT vs SUPPLY VOLTAGE VDD = 5 V 2.5 50 Figure 5 5.0 3.0 60 IOL − Low-Level Output Current − mA LOW-LEVEL OUTPUT VOLTAGE vs LOW-LEVEL OUTPUT CURRENT 3.5 70 0.0 0 Figure 4 VOL − Low-Level Output Voltage − V TA = 25°C TA = 0°C TA = −40°C 1.2 IOH − High-Level Output Current − mA 4.5 80 5.0 VDD = 2.7 V 2.4 0.0 0 90 HIGH-LEVEL OUTPUT VOLTAGE vs HIGH-LEVEL OUTPUT CURRENT V OH − High-Level Output Voltage − V VOL − Low-Level Output Voltage − V V OH − High-Level Output Voltage − V 2.1 0.6 100 Figure 3 2.7 VDD = 2.7 V 1.2 VDD = 2.7 V and 5 V TA = 25° C 110 LOW-LEVEL OUTPUT VOLTAGE vs LOW-LEVEL OUTPUT CURRENT 2.7 1.5 120 Figure 2 HIGH-LEVEL OUTPUT VOLTAGE vs HIGH-LEVEL OUTPUT CURRENT 2.4 COMMON-MODE REJECTION RATIO vs FREQUENCY VICR − Common-Mode Input Voltage − V I DD − Supply Current − µ A/ch VIO − Input Offset Voltage − µ V 1200 CMRR − Common-Mode Rejection Ratio − dB TYPICAL CHARACTERISTICS 900 800 VDD = 5 V 700 VDD = 2.7 V 600 500 400 300 200 AV= 1 VIC = VDD/2 100 0 −40 −25 −10 5 20 35 50 65 80 95 110 125 TA − Free-Air Temperature − °C Figure 9 7        SLOS362A − JUNE 2001 − REVISED JANUARY 2005 TYPICAL CHARACTERISTICS POWER SUPPLY REJECTION RATIO vs FREQUENCY DIFFERENTIAL VOLTAGE AMPLIFICATION AND PHASE vs FREQUENCY VDD = 2.7 V and 5 V TA = 25° C 80 PSSR− 70 60 50 40 30 20 10 0 10 100 1k 10k 100k f − Frequency − Hz 1M 10M 100 VDD = 2.7 V RL= 2 kΩ CL = 10 pF TA = 25° C 90 80 70 60 120 Phase 50 90 40 60 30 30 20 −30 0 −60 −10 1k 10 k 100 k Figure 11 10 6 5 4 3 RL = 2 kΩ CL = 10 pF f = 10 kHz 2.5 3 3.5 4 4.5 5 5.5 7 6 5 4 3 2 1 SLEW RATE vs FREE-AIR TEMPERATURE Figure 15 7 SR+ 6 5 4 AV = 1 RL = 2 kΩ CL = 50 pF V(step) = 1 Vpp TA = 25° C 3 2 1 0 2.5 20 35 50 65 80 95 110 125 55 12 50 11 SR − Slew Rate − V/µs 8 SR+ 6 5 3 2 1 4.5 5 5.5 6 45 SR− 9 4 4 PHASE MARGIN vs LOAD CAPACITANCE 13 7 3.5 Figure 14 SLEW RATE vs FREE-AIR TEMPERATURE 10 3 VDD − Supply Voltage − V Figure 13 Figure 12 TA − Free-Air Temperature − °C 8 TA − Free-Air Temperature − °C VDD − Supply Voltage − V 14 13 12 11 SR− 10 9 8 7 SR+ 6 5 VDD = 2.7 V 4 AV = 1 3 RL = 2 kΩ 2 CL = 50 pF 1 V(step) = 1 Vpp 0 −40 −25 −10 5 20 35 50 65 80 95 110 125 VDD = 2.7 and 5 V RL = 2 kΩ CL = 10 pF f = 10 kHz 0 −40 −25 −10 5 6 SR− 9 8 SR − Slew Rate − V/µs 7 2 SR − Slew Rate − V/µs 11 10 VDD = 5 V AV = 1 V(step) = 1 Vpp RL = 2 kΩ CL = 50 pF 0 −40 −25 −10 5 20 35 50 65 80 95 110 125 TA − Free-Air Temperature − °C Figure 16 www.ti.com φ m − Phase Margin − ° 8 0 8 SLEW RATE vs SUPPLY VOLTAGE GAIN-BANDWIDTH PRODUCT vs FREE-AIR TEMPERATURE 9 Gain-Bandwidth Product − MHz Gain-Bandwidth Product − MHz 9 1 −90 10 M 1M f − Frequency − Hz GAIN-BANDWIDTH PRODUCT vs SUPPLY VOLTAGE 2 0 Gain 10 Figure 10 10 Phase − ° PSSR+ 90 A VD − Differential Voltage Amplification − dB PSRR − Power Supply Rejection Ratio − dB 100 Rnull = 100 Ω 40 35 30 Rnull = 20 Ω 25 Rnull = 0 Ω 20 15 VDD = 2.7 V and 5 V RL = 2 kΩ AV = 1 TA = 25°C 10 5 0 10 100 CL − Load Capacitance − pF Figure 17 1k        SLOS362A − JUNE 2001 − REVISED JANUARY 2005 TYPICAL CHARACTERISTICS CROSSTALK vs FREQUENCY 0 VDD = 2.7 V and 5 V TA = 25° C 450 VDD = 2.7 V and 5 V RL = 2 kΩ CL = 10 pF AV = 1 VO(PP) = VDD/2 TA = 25°C All Channels −20 400 −40 350 Crosstalk − dB V n − Equivalent Input Noise Voltage − nV/ 500 300 250 200 150 −60 −80 Shutdown Crosstalk −100 100 −120 50 Crosstalk 0 10 100 1k 10k f − Frequency − Hz −140 10 100k 100 1k 10k f − Frequency − Hz Figure 18 Figure 19 VOLTAGE-FOLLOWER LARGE-SIGNAL PULSE RESPONSE 6 0 5 −1 4 −2 VDD = 5 V VIC = VDD/2 RL = 2 kΩ CL = 10 pF AV = 1 TA = 25°C VO 2 1 2.60 2.75 V O − Output Voltage − V VIC 2.80 V IC − Common-Mode Input Voltage − V 1 7 V O − Output Voltage − V VOLTAGE-FOLLOWER SMALL-SIGNAL PULSE RESPONSE 2 8 3 2.55 2.70 VDD = 5 V VIC = 100 mV RL = 2 kΩ CL = 10 pF AV = 1 TA = 25°C VIC 2.65 2.60 2.45 2.40 2.55 2.50 VO 2.40 0 1 2 3 4 5 6 0 0.2 t − Time − µs 0.4 0.6 0.8 1 1.2 Figure 20 Figure 21 SHUTDOWN SUPPLY CURRENT vs FREE-AIR TEMPERATURE SHUTDOWN SUPPLY CURRENT vs SUPPLY VOLTAGE 8 Shutdown = 0 V AV = 1 VIC = VDD/2 7 6 VDD = 5 V 5 4 3 VDD = 3.6 V VDD = 2.7 V 1 0 −40 −25 −10 5 20 35 50 65 80 95 110 125 1.4 t − Time − µs I DD(SD) − Shutdown Supply Current − µ A/ch I DD(SD) − Shutdown Supply Current − µ A/ch 2.50 2.45 0 2 100k V IC − Common-Mode Input Voltage − V Hz EQUIVALENT INPUT NOISE VOLTAGE vs FREQUENCY 11 10 9 Shutdown = 0 V AV = 1 VIC = VDD/2 8 TA = 25°C 7 6 5 TA = 0°C TA = −40°C 4 3 TA = 70°C 2 1 TA = 125°C 0 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 5.5 6 VDD − Supply Voltage − V TA − Free-Air Temperature − °C Figure 22 Figure 23 www.ti.com 9        SLOS362A − JUNE 2001 − REVISED JANUARY 2005 TYPICAL CHARACTERISTICS SD − Shutdown Pulse − V 2.5 2.0 1.5 1.0 0.5 0.0 I DD(SD) − Shutdown Supply Current − µ A 5.0 4.0 3.0 2.0 1.0 0.0 V O − Output Voltage − mV SHUTDOWN SUPPLY CURRENT / OUTPUT VOLTAGE vs TIME SD VDD = 5 V AV = 1 RL = 2 kΩ CL = 10 pF VIC = VDD/2 TA = 25° C VO 0.0 0.5 1.0 IDD(SD) 1.5 2.0 0 1 2 3 4 t − Time − µs Figure 24 10 5 www.ti.com 6 7 8 9        SLOS362A − JUNE 2001 − REVISED JANUARY 2005 TLV263x PACKAGE PINOUTS TLV2630 D OR P PACKAGE (TOP VIEW) TLV2630 DBV PACKAGE (TOP VIEW) 1 OUT 6 VDD GND 2 5 SHDN IN+ 3 4 IN − TLV2631 D OR P PACKAGE (TOP VIEW) NC IN − IN + GND 1OUT 1IN − 1IN+ GND NC 1SHDN NC 1 8 2 7 3 6 4 5 NC IN − IN + GND 1 8 2 7 3 6 4 5 TLV2631 DBV PACKAGE (TOP VIEW) SHDN VDD OUT NC OUT 1 GND 2 IN+ 3 1OUT 1IN − 1IN + GND 1 8 2 7 3 6 4 5 VDD 2OUT 2IN − 2IN+ VDD 4 IN − TLV2633 DGS PACKAGE (TOP VIEW) TLV2632 D, DGK, OR P PACKAGE (TOP VIEW) NC VDD OUT NC 5 1OUT 1IN − 1IN+ GND 1SHDN 1 2 3 4 5 10 9 8 7 6 VDD 2OUT 2IN − 2IN+ 2SHDN TLV2633 D OR N PACKAGE TLV2634 D, N, OR PW PACKAGE TLV2635 D, N, OR PW PACKAGE (TOP VIEW) (TOP VIEW) (TOP VIEW) 1 14 2 13 3 12 4 11 5 10 6 9 7 8 VDD 2OUT 2IN − 2IN+ NC 2SHDN NC 1OUT 1IN − 1IN+ VDD 2IN+ 2IN − 2OUT 1 14 2 13 3 12 4 11 5 10 6 9 7 8 4OUT 4IN − 4IN+ GND 3IN+ 3IN − 3OUT 1OUT 1IN − 1IN+ VDD 2IN+ 2IN − 2OUT 1/2SHDN 1 16 2 15 3 14 4 13 5 12 6 11 7 10 8 9 4OUT 4IN − 4IN+ GND 3IN + 3IN− 3OUT 3/4SHDN NC − No internal connection www.ti.com 11 PACKAGE OPTION ADDENDUM www.ti.com 10-Dec-2020 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Pins Package Drawing Qty Eco Plan (2) Lead finish/ Ball material MSL Peak Temp Op Temp (°C) Device Marking (3) (4/5) (6) TLV2630IDBVR ACTIVE SOT-23 DBV 6 3000 RoHS & Green NIPDAU Level-1-260C-UNLIM -40 to 125 VAYI TLV2631IDBVR ACTIVE SOT-23 DBV 5 3000 RoHS & Green NIPDAU Level-1-260C-UNLIM -40 to 125 VAZI TLV2631IDBVT ACTIVE SOT-23 DBV 5 250 RoHS & Green NIPDAU Level-1-260C-UNLIM -40 to 125 VAZI TLV2632IDGKR ACTIVE VSSOP DGK 8 2500 RoHS & Green NIPDAU Level-1-260C-UNLIM -40 to 125 AKG TLV2632IDR ACTIVE SOIC D 8 2500 RoHS & Green NIPDAU Level-1-260C-UNLIM -40 to 125 2632I TLV2634ID ACTIVE SOIC D 14 50 RoHS & Green NIPDAU Level-1-260C-UNLIM -40 to 125 2634I TLV2634IPWR ACTIVE TSSOP PW 14 2000 RoHS & Green NIPDAU Level-1-260C-UNLIM -40 to 125 2634I (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) RoHS: TI defines "RoHS" to mean semiconductor products that are compliant with the current EU RoHS requirements for all 10 RoHS substances, including the requirement that RoHS substance do not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, "RoHS" products are suitable for use in specified lead-free processes. TI may reference these types of products as "Pb-Free". RoHS Exempt: TI defines "RoHS Exempt" to mean products that contain lead but are compliant with EU RoHS pursuant to a specific EU RoHS exemption. Green: TI defines "Green" to mean the content of Chlorine (Cl) and Bromine (Br) based flame retardants meet JS709B low halogen requirements of
TLV2632IDGKR
物料型号: - TLV2630/1(单路版本) - TLV2632/3(双路版本) - TLV2634/5(四路版本)

器件简介: 这些是德州仪器(Texas Instruments)生产的单电源运算放大器,具有轨到轨(rail-to-rail)输出能力,输入范围包含地线。它们在扩展的工业温度范围(-40°C至125°C)内工作,最低工作电源电压可降至2.7V,并提供轨到轨的输出摆动特性。

引脚分配: - TLV2630/1:5或6引脚SOT-23封装 - TLV2632/3:8或10引脚MSOP封装 - TLV2634/5:14或16引脚SOIC封装

参数特性: - 增益带宽积:9MHz - 电源电流:每通道730µA - 电源电压范围:2.7V至5.5V - 超低功耗关闭模式:每通道4µA

功能详解: 这些运算放大器适用于高速和高分辨率数据转换器应用,具有低噪声和低失真特性。它们的地线输入范围允许它们直接与地线轨道参考系统接口。

应用信息: 适用于与锂离子电池供电系统兼容的设备,以及许多当今可用的微功耗微控制器的电源电压范围,包括德州仪器的MSP430。

封装信息: 提供PDIP、SOIC、SOT-23、MSOP和TSSOP等多种封装选项。
TLV2632IDGKR 价格&库存

很抱歉,暂时无法提供与“TLV2632IDGKR”相匹配的价格&库存,您可以联系我们找货

免费人工找货
TLV2632IDGKR
    •  国内价格
    • 1000+6.71000

    库存:9308