TPS62700, TPS62701
www.ti.com................................................................................................................................................... SLVS784B – DECEMBER 2007 – REVISED JUNE 2008
2 MHz 650 mA Step Down Converter for RF Power Amplifiers in
Tiny 8-pin WCSP Package
FEATURES
1
•
•
•
•
•
•
•
•
•
•
•
•
DESCRIPTION
High-Efficiency Step-Down Converter
Output Current up to 650 mA
VIN Range From 2.5 to 6.0 V
2.0-MHz Fixed-Frequency Operation
Clock Dithering (TPS62701)
Dynamic Voltage Control With External
Reference (1.3 V to 3.09 V)
Fast Output-Voltage Settling (1.3 V to 3.09 V in
20 µs)
Soft Start
Overload Protection
Undervoltage Lockout
Thermal Protection
8-Pin WCSP Package
The TPS6270x device is a high-efficiency
synchronous step-down DC-DC converter optimized
for RF power-amplifier (PA) applications. It provides
up to 650 mA of output current from a single Li-Ion
cell.
The device converts input voltages from 2.5 to 6.0 V
down to an output voltage set by an external analog
reference voltage applied to the pin VCON. The
output voltage follows the external reference by an
internal gain of 2.5 within the limits of 1.3 V to 3.09 V.
This scheme adjusts the output voltage of the DC/DC
converter and therefore the output power of an
RF-PA.
The TPS6270x operates in fixed-frequency PWM
mode at a 2.0-MHz switching frequency to minimize
RF interference. This converter operates with only
three small external components; an input capacitor,
inductor and output capacitor. The TPS62701 has in
addition a built-in clock-dithering circuit to reduce RF
noise.
APPLICATIONS
•
•
Cell Phones, Smart Phones
Battery-Powered RF Amplifier
The TPS6270x is available in a tiny 8 pin lead free
WCSP package for smallest solution size.
TYPICAL APPLICATION
VIN 2.5 V to 6.0 V
3.3 mH
10 mF
AVIN
PVIN
SW
FB
VOUT = 2.5 x VCON
1.3 V to 3.09 V
4.7 mF
EN
VCON
AGND
PGND
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2007–2008, Texas Instruments Incorporated
TPS62700, TPS62701
SLVS784B – DECEMBER 2007 – REVISED JUNE 2008................................................................................................................................................... www.ti.com
These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam
during storage or handling to prevent electrostatic damage to the MOS gates.
ORDERING INFORMATION
TA
PART NUMBER (1)
PACKAGE
ORDERING
–30°C to 85°C
TPS62700
WCSP 8 pin
TPS62700YZF
CKL
TPS62701YZF
CGJ
TPS62701
(1)
PACKAGE MARKING
The package is available in tape on reel. Add R suffix to order quantities of 3000 parts per reel.
ABSOLUTE MAXIMUM RATINGS
over operating free-air temperature range (unless otherwise noted) (1)
Input voltage range
(2)
Voltage range at EN, VCON (2)
UNIT
–0.3 to 7
V
–0.3 to VIN +0.3, ≤ 7
V
–0.3 to 7
V
Voltage on SW (2)
Peak output current (2)
VALUE
internally limited
ESD rating (3)
HBM Human body model
2
Machine model
kV
200
V
TJ
Maximum operating junction temperature
–40 to 150
°C
Tstg
Storage temperature range
–65 to 150
°C
(1)
(2)
(3)
Stresses beyond those listed under absolute maximum ratings may cause permanent damage to the device. These are stress ratings
only and functional operation of the device at these or any other conditions beyond those indicated under recommended operating
conditions is not implied. Exposure to absolute–maximum–rated conditions for extended periods may affect device reliability.
All voltage values are with respect to network ground terminal.
The human body model is a 100 pF capacitor discharged through a 1.5 kΩ resistor into each pin. The machine model is a 200 pF
capacitor discharged directly into each pin.
DISSIPATION RATINGS (1)
(1)
(2)
(2)
PACKAGE
RθJA
POWER RATING
FOR TA ≤ 25°C
DERATING FACTOR
ABOVE TA = 25°C
YZF
110°C/W
900 mW
9 mW/°C
Maximum power dissipation is a function of TJ(max), θJA and TA. The maximum allowable power dissipation at any allowable ambient
temperature is PD = [TJ(max) – TA] / θJA.
This thermal data is measured with high-K board (4 layers board according to JESD51-7 JEDEC standard).
RECOMMENDED OPERATING CONDITIONS
over operating free-air temperature range (unless otherwise noted)
MIN
NOM
MAX
UNIT
VIN, AVIN, PVIN
Supply voltage
2.5
6
V
TA
Operating ambient temperature
–40
85
°C
TJ
Operating junction temperature
–40
125
°C
2
Submit Documentation Feedback
Copyright © 2007–2008, Texas Instruments Incorporated
Product Folder Link(s): TPS62700 TPS62701
TPS62700, TPS62701
www.ti.com................................................................................................................................................... SLVS784B – DECEMBER 2007 – REVISED JUNE 2008
ELECTRICAL CHARACTERISTICS
PVIN = AVIN = VIN = 3.6 V, EN = AVIN, TA = TJ = –40°C to 85°C typical values are at TA = 25°C (unless otherwise noted), see
parameter measurement information
PARAMETER
TEST CONDITIONS
MIN
TYP
MAX
UNIT
SUPPLY
AVIN, PVIN
Input voltage range
IOUT
IOUT
Output current
VIN 2.5 to 6 V
IQ
Operating quiescent current into AVIN
VCON = 1 V, FB = 0 V, VIN = 3.6V, device not
switching (1)
ISD
Shutdown current
EN = SW=VCON = AGND, AVIN = PVIN = 3.6V
max
= 650 mA
2.5
6
V
650
mA
0.1
0.3
mA
0.01
2
µA
V
ENABLE
VIH
High Level Input Voltage, EN
1.2
VIN
VIL
Low Level Input Voltage, EN
0
0.4
V
IIN
Input bias Current, EN
5
10
µA
V
EN = AVIN
CONTROL INPUT VCON
VVCON,
MIN
VCON Threshold forcing VFB, MIN
Falling VCON signal
0.484
0.52
0.556
VVCON,
MAX
VCON Threshold forcing VFB,MAX
Rising VCON signal
1.211
1.236
1.26
ZVCON
VCON Input resistance
CVCON
VCON Input capacitance
IIN
VCON Input current
VCON
Gain
100
VCON = 1 V, f = 100 kHz
0.556 V ≤ VCON ≤ 1.208 V
Internal Gain VOUT/VCON
V
kΩ
20
pF
10
µA
2.5
POWER SWITCH
100
140
230
PVIN = VGS = 3.6 V
Low-Side MOSFET on-resistance
PVIN = VGS = 3.6 V
Forward current limit MOSFET high side
and low side
PVIN = 3.6 V
935
1100
1200
mA
3 V < VIN < 5 V
1.7
2.0
2.3
MHz
RDS(ON)
ILIMF
TA = TJ = 25°C
High side MOSFET on-resistance
TA = TJ = –40°C to 85°C
TA = TJ = 25°C
270
180
200
TA = TJ = –40°C to 85°C
330
430
mΩ
mΩ
OSCILLATOR
fSW
Oscillator frequency
FEEDBACK/OUTPUT
VCON = 0.4 V
(2) (3)
1.25
1.3
1.35
V
Feedback voltage
VCON = 1.1 V
(2) (3)
2.693
2.75
2.835
V
Maximum feedback voltage
VCON = 1.4 V
(2) (3)
3.028
3.09
3.15
V
Linearity in VCON range 0.556 V to 1.208 V
(2) (3)
2
%
VOUT Rise time from 1.3 V to 3.09 V
VIN = 4.2 V, COUT = 4.7 µF, L = 3.3 µH, RLOAD = 5 Ω
20
30
VOUT Fall time from 3.09 V to 1.3 V
VIN = 4.2 V, COUT = 4.7 µF, L = 3.3 µH, RLOAD = 10 Ω
20
30
T_ON
Start-up Time
From Enable low to high transition until VOUT reaches
3.09 V, COUT = 4.7 µF, L = 3.3 µH, IOUT ≤ 1 mA
190
300
η
Efficiency (L = 3.3µH, DCR ≤ 100mΩ)
VIN = 3.6 V, VOUT = 1.3 V, IOUT = 150 mA
VFB,
MIN
VFB
VFB,
MAX
Linearity
TRESPONSE
Minimum feedback voltage
–2
(3) (4)
µs
(3) (4)
(5) (3)
VIN = 3.6 V, VOUT = 3.09 V, IOUT = 400 mA
87
(5) (3)
µs
%
95
VOUT_RIPPLE
Ripple voltage, PWM mode
VIN = 3 V to 4.5 V, VOUT = 1.3 V,
IOUT = 10 mA to 400 mA (3)
10
mVp-p
Line_tr
Line transient response
VIN = 600 mV step, over VIN range 3 V to 5.5 V TRISE =
TFALL = 10 µs, VOUT = 1.3 V,
IOUT = 100 mA (3)
50
mVpk
Load_tr
Load transient response
VIN = 3.1/3.6/4.5 V, VOUT = 1.3 V,
transients 0 mA to 100 mA,
TRISE = TFALL = 10 µs (3)
50
mVpk
(1)
(2)
(3)
(4)
(5)
Device operating in 100% duty cycle mode
2.5 V ≤ VIN ≤ 6 V, with VIN_MIN = VOUT + 0.5 V
The voltage need to be measured on the COUT using appropriate measurement probes. For the measurements, a proper PCB layout
and usage of recommended inductors and capacitors are essential. See parameter measurement information.
Rise/Fall time valid for VFB within specified limits.
Using appropriate inductor with R (DCR) less than 100 mΩ
Copyright © 2007–2008, Texas Instruments Incorporated
Product Folder Link(s): TPS62700 TPS62701
Submit Documentation Feedback
3
TPS62700, TPS62701
SLVS784B – DECEMBER 2007 – REVISED JUNE 2008................................................................................................................................................... www.ti.com
PIN ASSIGNMENTS
CSP-8
CSP-8
TOP VIEW
BOTTOM VIEW
SW
SW
PVIN
A1
AVIN
B1
EN
C1
A2
C2
A3
PGND
PGND
A3
B3
AGND
AGND
B3
C3
FB
FB
C3
VCON
A2
C2
A1
PVIN
B1
AVIN
C1
EN
VCON
TERMINAL FUNCTIONS
TERMINAL
I/O
DESCRIPTION
NAME
NO. CSP
PVIN
A1
PWR
VIN power supply input for the PMOSFET
AVIN
B1
PWR
VIN analog supply input for the internal analog circuitry
EN
C1
I
Enable input for the device. Set high for operation, low for shutdown. This pin must be terminated.
VCON
C2
I
Voltage control input. This pin controls the output voltage of the converter. The output voltage follows
VCON with a gain of 2.5 for 0.556 V ≤ VCON ≤ 1.208 V.
FB
C3
I
Analog Feedback Input Pin for the internal regulation loop. Connect this pin directly to the output
capacitor.
AGND
B3
I
Analog GND Pin for the internal analog circuitry.
PGND
A3
Power GND Pin for the NMOSFET
SW
A2
Switch Node to the internal PMOSFET and NMOSFET. Connect the external inductor between this pin
and the output capacitor.
FUNCTIONAL BLOCK DIAGRAM
EN
PV IN
AVIN
Current
Limit Comparator
Thermal
Shutdown
VCON
Limit
Clamp
Circuit
High Side
Error Amp
.
Gain
2.5
VREF
Zero-Pole
Amp.
Gate Driver
Anti
Shoot-Through
Control
Stage
Integrator
PWM
Comp.
SW
Through
Softstart
Limit
Low Side
FB
Sawtooth
Generator
2.0 Mhz
Oscillator
Current
Limit Comparator
PGND
AGND
4
Submit Documentation Feedback
Copyright © 2007–2008, Texas Instruments Incorporated
Product Folder Link(s): TPS62700 TPS62701
TPS62700, TPS62701
www.ti.com................................................................................................................................................... SLVS784B – DECEMBER 2007 – REVISED JUNE 2008
PARAMETER MEASUREMENT INFORMATION
VIN
10 mF
AVIN
3.3 mH
PVIN
SW
VOUT
4.7 mF/10 mF
FB
EN
VCON
AGND
PGND
L: LPS4018 3.3 mH, DCR 70 mW/VLF3014A 3.3 mH DCR 150 mW
CIN: GRM188R60J106M 10 mF Murata 0603 size
COUT: GRM188R60J106M 10 mF Murata 0603 size
GRM188Ru60J475K 4.7 mF Murata 0603 size
DETAILED DESCRIPTION
OPERATION
The TPS6270x step down converter operates at a 2.0-MHz fixed frequency using pulse-width modulation (PWM)
over the entire load range. This ensures low output-voltage ripple for RF-PA power applications.
In PWM operation, the converter uses a unique fast-response voltage-mode control scheme to achieve good line
and load regulation, allowing the use of small ceramic input and output capacitors.
At the beginning of each clock cycle initiated by the clock signal, the High-Side MOSFET switch is turned on. The
current flows from the input capacitor via the High-Side MOSFET switch through the inductor to the output
capacitor and load. During this phase, the current ramps up until the PWM comparator trips and the control logic
turns off the switch. The current limit comparator also turns off the switch when the current limit of the High-Side
MOSFET switch is exceeded. After a short dead time to prevent shoot-through, the Low-Side MOSFET rectifier
is turned on, and the inductor current ramps down. The current then flows from the inductor to the output
capacitor and to the load. It turns back to the inductor through the Low-Side MOSFET rectifier.
The next cycle is initiated by the clock signal turning off the Low-Side MOSFET rectifier and turning on the
High-Side MOSFET switch.
Dynamic Output Voltage Control VCON
The output voltage of TPS6270x can be dynamically adjusted with an external analog voltage applied to the pin
VCON. This voltage is typically supplied from an external DAC to adjust the supply voltage for the RF Power
amplifier, and therefore to determine the RF output power. The output voltage is set to : VOUT = 2.5 x VCON.
The output voltage can be set in the range between VFB, MIN (1.3 V) and VFB, MAX (3.09 V). The device provides
an internal voltage gain factor of 2.5. For dynamic voltage adjustment the VCON voltage range is between VCON,
MIN (0.52 V) and VCON, MAX (1.24 V). In Case the VCON voltage is out of this range, the output voltage is internally
limited to VFB, MIN (1.3 V) and VFB, MAX (3.09 V). This allows using the TPS6270x as a fixed output voltage
converter where the VCON Pin is connected, for example, to GND or VIN.
100% Duty Cycle Low Dropout Operation
The device starts to enter 100% duty-cycle mode when the input voltage approaches the nominal output voltage.
In order to maintain the output voltage, the High-Side MOSFET switch is turned on 100% for one or more cycles.
Copyright © 2007–2008, Texas Instruments Incorporated
Product Folder Link(s): TPS62700 TPS62701
Submit Documentation Feedback
5
TPS62700, TPS62701
SLVS784B – DECEMBER 2007 – REVISED JUNE 2008................................................................................................................................................... www.ti.com
With further decreases of VIN, the High-Side MOSFET switch is turned on completely. In this case, the converter
offers a low input-to-output voltage difference. This is particularly useful in battery-powered applications to
achieve longest operation time by taking full advantage of the entire battery voltage range. The minimum input
voltage to maintain regulation depends on the load current and output voltage, and can be calculated as:
VIN _ MIN = VOUT _ MIN + I OUT _ MAX ´ (R DSON _ MAX + R L )
(1)
With:
IOUT_MAX = maximum output current plus inductor ripple current
RDSON_MAX = maximum P-channel switch RDSON.
RL = DC resistance of the inductor
VOUT_MAX = nominal output voltage plus maximum output voltage tolerance
ENABLE
The device is enabled by setting the EN pin to high and at first the internal circuits are settled. Afterwards the
device activates the soft start circuit and ramps up the output voltage. The output voltage is ramped up from 0 V
to 3.09 V within typically 190 µs after the EN pin changes from low to high. A low signal at the EN pin sets the
device in Shutdown Mode with less than 2 µA current consumption.
SHORT-CIRCUIT PROTECTION
The High-Side and Low-Side MOSFET switches are protected with maximum output current = ILIMF in case a
short circuit on the output occurs. When the High-Side MOSFET switch reaches its current limit, it is turned off,
and the Low-Side MOSFET switch is turned on. The High-Side MOSFET switch can only turn on again, after the
current in the Low-Side MOSFET switch decreases below its current limit.
THERMAL SHUTDOWN
As soon as the junction temperature, TJ, exceeds 150°C (typical) the device goes into thermal shutdown. In this
mode, the High-Side and Low-Side MOSFETs are turned-off. The device continues its operation when the
junction temperature falls by typical 20°C.
UNDERVOLTAGE LOCKOUT
The device stops operation at typ. 1.5 V with falling input voltage and starts operation at typ. 1.7 V with rising
input voltage. This prevents malfunction of the device due to low input voltage.
CLOCK DITHERING
In order to reduce switch frequency harmonics in the higher RF bands, the TPS62701 has a built-in
clock-dithering circuit.
TYPICAL CHARACTERISTICS
Typical Characteristic Graphs
FIGURE
Switching Frequency
vs Input Voltage (VIN)
Figure 1
RDSON
vs VIN, N-Channel
Figure 2
RDSON
vs VIN, P-Channel
Figure 3
Shutdown Current (ISD)
vs Temperature
Figure 4
Quiescent Current (IQ) into AVIN
vs VIN
Figure 5
EN High Threshold Voltage
vs VIN
Figure 6
Efficiency
vs Output Current
Figure 7
Efficiency
vs Output Current
Figure 8
Efficiency
vs Output Voltage
Figure 9
Efficiency
vs Output Voltage
Figure 10
6
Submit Documentation Feedback
Copyright © 2007–2008, Texas Instruments Incorporated
Product Folder Link(s): TPS62700 TPS62701
TPS62700, TPS62701
www.ti.com................................................................................................................................................... SLVS784B – DECEMBER 2007 – REVISED JUNE 2008
TYPICAL CHARACTERISTICS (continued)
Typical Characteristic Graphs (continued)
FIGURE
Output Voltage
vs Output Current (VOUT = 1.3 V, TA = 25°C)
Figure 11
Output Voltage
vs Output Current (VOUT = 1.3 V, TA = –40°C)
Figure 12
Output Voltage
vs Output Current (VOUT = 1.3 V, TA = 85°C)
Figure 13
Output Voltage
vs Output Current (VOUT = 2.75 V, TA = 25°C)
Figure 14
Output Voltage
vs Output Current (VOUT = 2.75 V, TA = –40°C)
Figure 15
Output Voltage
vs Output Current (VOUT = 2.75 V, TA = 85°C)
Figure 16
Output Voltage
vs Output Current (VOUT = 3.09 V, TA = 25°C)
Figure 17
Output Voltage
vs Output Current (VOUT = 3.09 V, TA = –40°C)
Figure 18
Output Voltage
vs. VCON Voltage (VI = 4.2 V)
Figure 19
Output Voltage
vs Output Current (VOUT = 3.09 V, TA = 85°C)
Figure 20
Output Voltage VOUT
vs VCON Voltage
Figure 21
VCON Max Threshold
VOUT TA = 25°C
Figure 22
VCON Max Threshold
VOUT TA = 85°C
Figure 23
VCON Max Threshold
VOUT TA =–40°C
Figure 24
VCON Min Threshold
VOUT TA = 25°C
Figure 25
VCON Min Threshold
VOUT TA = 85°C
Figure 26
VCON Min Threshold
VOUT TA =–40°C
Figure 27
Load Transient Response VOUT = 1.3 V
Figure 28
Load Transient Response VOUT = 3.09 V
Figure 29
Load Transient Response VOUT = 3.09 V
Figure 30
Load Transient Response VOUT = 3.09 V
Figure 31
PWM Mode Operation VOUT = 1.3 V
Figure 32
PWM Mode Operation VOUT = 3.09 V
Figure 33
Output Voltage Ripple At High Duty Cycle Operation
Figure 34
VCON Voltage Response
Figure 35
VCON Output Voltage Response And Synchronous Applied Load Transient
Figure 36
Startup VOUT 1.3 V
Figure 37
Startup VOUT 3.09 V
Figure 38
Line Transient Response
Figure 39
Copyright © 2007–2008, Texas Instruments Incorporated
Product Folder Link(s): TPS62700 TPS62701
Submit Documentation Feedback
7
TPS62700, TPS62701
SLVS784B – DECEMBER 2007 – REVISED JUNE 2008................................................................................................................................................... www.ti.com
RDSON
vs
INPUT VOLTAGE VIN, N-CHANNEL
2.30
Switching Frequency - MHz
2.20
TA = 20°C
TA = 85°C
2.10
2.00
TA = -30°C
TA = 0°C
1.90
1.80
1.70
3
3.5
4
4.5
5
VI - Input Voltage - V
5.5
6
0.40
0.35
0.30
TA = 85°C
0.25
TA = 25°C
TA = -40°C
0.20
0.15
0.10
0.05
2.5
3
4
4.5
5
5.5
6
VI - Input Voltage - V
Figure 2.
RDSON
vs
VIN, P-CHANNEL
SHUTDOWN CURRENT (ISD)
vs
TEMPERATURE
0.25
125
EN = 0 V
0.23
0.21
100
TA = 85°C
0.19
0.17
TA = 25°C
0.15
TA = -40°C
0.13
0.11
0.09
VI = 5.5 V
75
VI = 4.5 V
VI = 3.5 V
50
VI = 2.5 V
25
0.07
0.05
2.5
3
3.5
4
4.5
5
VI - Input Voltage - V
5.5
6
0
-40
-20
0
20
40
60
TA - Ambient Temperature - °C
Figure 3.
8
3.5
Figure 1.
Shutdown Current - nA
rDS(on) - Static Drain-Source on-State Resistance - W
2.5
rDS(on) - Static Drain-Source on-State Resistance - W
SWITCHING FREQUENCY
vs
VIN
Submit Documentation Feedback
80
100
Figure 4.
Copyright © 2007–2008, Texas Instruments Incorporated
Product Folder Link(s): TPS62700 TPS62701
TPS62700, TPS62701
www.ti.com................................................................................................................................................... SLVS784B – DECEMBER 2007 – REVISED JUNE 2008
QUIESCENT CURRENT (IQ) INTO AVIN
vs
VIN
EN HIGH THRESHOLD VOLTAGE
vs
VIN
140
1
TA = -40°C
0.9
100
TA = 55°C
TA = 25°C
TA = 85°C
EN High Threshold - V
Quiescent Current - mA
120
80
60
40
TA = 0°C
TA = -40°C
3
3.5
4
4.5
5
VI - Input Voltage - V
5.5
0.7
TA = 55°C
TA = 85°C
0.6
0.4
2.5
6
VI = 2.7 V
3.5
5
EFFICIENCY
vs
OUTPUT CURRENT
EFFICIENCY
vs
OUTPUT CURRENT
VI = 3 V
VI = 3.6 V
5.5
6
VI = 3.3 V
VO = 1.3 V
95
L = 3.3 mH,
DCR < 100 mW
90
Efficiency - %
85
VI = 4.2 V
VI = 5.5 V
75
4.5
Figure 6.
90
80
4
VI - Input Voltage - V
100
95
3
Figure 5.
100
Efficiency - %
0.8
0.5
20
0
2.5
TA = 25°C
TA = 0°C
VI = 3.6 V
VI = 4.2 V
85
VI = 5.5 V
80
75
70
70
65
65
VO = 3.09 V
60
L = 3.3 mH,
DCR < 100 mW
60
0
0.2
0.4
IO - Output Current - A
0.6
0
Figure 7.
0.2
0.4
IO - Output Current - A
0.6
Figure 8.
Copyright © 2007–2008, Texas Instruments Incorporated
Product Folder Link(s): TPS62700 TPS62701
Submit Documentation Feedback
9
TPS62700, TPS62701
SLVS784B – DECEMBER 2007 – REVISED JUNE 2008................................................................................................................................................... www.ti.com
EFFICIENCY
vs
OUTPUT VOLTAGE
EFFICIENCY
vs
OUTPUT VOLTAGE
100
100
VI = 3.6 V,
VI = 4.2 V,
95
L = 3.3 mH,
DRC < 100 mW
95
90
Efficiency - %
Efficiency - %
90
RL = 5 W
85
RL = 10 W
RL = 15 W
80
RL = 5 W
RL = 10 W
85
RL = 15 W
80
75
75
70
1.3
1.5
1.7
1.9 2.1 2.3 2.5 2.7
VO - Output Voltage - V
2.9
70
1.3
3.1
1.5
1.7
Figure 10.
OUTPUT VOLTAGE
vs
OUTPUT CURRENT
OUTPUT VOLTAGE
vs
OUTPUT CURRENT
2.9
3.1
1.339
TA = 25°C,
VCON = 0 V,
VO = 1.3 V
1.313
1.3
VI = 2.7 V,
VI = 3.3 V,
VI = 3.6 V,
VI = 4.2 V,
VI = 5.5 V
1.287
1.274
TA = -40°C,
VCON = 0 V,
VO = 1.3 V
1.326
VO - Output Voltage - V
1.326
1.313
1.3
VI = 2.7 V,
VI = 3.3 V,
VI = 3.6 V,
VI = 4.2 V,
VI = 5.5 V
1.287
1.274
1.261
1.261
0
0.2
0.4
IO - Output Current - A
0.6
0
0.2
Figure 11.
10
1.9 2.1 2.3 2.5 2.7
VO - Output Voltage - V
Figure 9.
1.339
VO - Output Voltage - V
L = 3.3 mH,
DRC < 100 mW
Submit Documentation Feedback
0.4
IO - Output Current - A
0.6
Figure 12.
Copyright © 2007–2008, Texas Instruments Incorporated
Product Folder Link(s): TPS62700 TPS62701
TPS62700, TPS62701
www.ti.com................................................................................................................................................... SLVS784B – DECEMBER 2007 – REVISED JUNE 2008
OUTPUT VOLTAGE
vs
OUTPUT CURRENT
OUTPUT VOLTAGE
vs
OUTPUT CURRENT
2.833
1.339
TA = 85°C,
VCON = 0 V,
VO = 1.3 V
2.805
VO - Output Voltage - V
VO - Output Voltage - V
1.326
1.313
1.3
VI = 2.7 V,
VI = 3.3 V,
VI = 3.6 V,
VI = 4.2 V,
VI = 5.5 V
1.287
1.274
2.778
2.750
VI = 3.3 V,
VI = 3.6 V,
VI = 4.2 V,
VI = 5.5 V
2.723
2.695
1.261
2.668
0
0.2
0.4
IO - Output Current - A
0
0.6
0.2
0.4
IO - Output Current - A
Figure 13.
Figure 14.
OUTPUT VOLTAGE
vs
OUTPUT CURRENT
OUTPUT VOLTAGE
vs
OUTPUT CURRENT
2.833
0.6
2.833
TA = -40°C,
VCON = 1.1 V,
VO = 2.75 V
2.778
2.750
VI = 3.3 V,
VI = 3.6 V,
VI = 4.2 V,
VI = 5.5 V
2.723
2.695
TA = 85°C,
VCON = 1.1 V,
VO = 2.75 V
2.805
VO - Output Voltage - V
2.805
VO - Output Voltage - V
TA = 25°C,
VCON = 1.1 V,
VO = 2.75 V
2.778
2.750
VI = 3.3 V,
VI = 3.6 V,
VI = 4.2 V,
VI = 5.5 V
2.723
2.695
2.668
2.668
0
0.2
0.4
0.6
0
IO - Output Current - A
Figure 15.
0.2
0.4
0.6
IO - Output Current - A
Figure 16.
Copyright © 2007–2008, Texas Instruments Incorporated
Product Folder Link(s): TPS62700 TPS62701
Submit Documentation Feedback
11
TPS62700, TPS62701
SLVS784B – DECEMBER 2007 – REVISED JUNE 2008................................................................................................................................................... www.ti.com
OUTPUT VOLTAGE
vs
OUTPUT CURRENT
OUTPUT VOLTAGE
vs
OUTPUT CURRENT
3.183
3.183
3.121
3.09
3.059
VI = 3.6 V,
VI = 4.2 V,
VI = 5.5 V
3.09
VI = 3.6 V,
VI = 4.2 V,
VI = 5.5 V
3.059
2.997
2.997
0
0.2
0.4
IO - Output Current - A
0
0.6
0.2
0.4
IO - Output Current - A
Figure 17.
Figure 18.
VOUT OUTPUT VOLTAGE
vs
VCON VOLTAGE
OUTPUT VOLTAGE
vs
OUTPUT CURRENT
3.2
0.6
3.183
VI = 4.2 V
RL = 8 Ω
TA = 85°C,
VCON = 1.4 V,
VO = 3.09 V
3.152
2.6
2.4
2.2
TA = −40°C,
TA = 25°C,
TA = 85°C
2.0
1.8
VO - Output Voltage - V
2.8
VO − Output Voltage − V
3.121
3.028
3.028
3.0
TA = -40°C,
VCON = 1.4 V,
VO = 3.09 V
3.152
VO - Output Voltage - V
VO - Output Voltage - V
3.152
TA = 25°C,
VCON = 1.4 V,
VO = 3.09 V
3.121
3.09
VI = 3.6 V,
VI = 4.2 V,
VI = 5.5 V
3.059
1.6
3.028
1.4
1.2
0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0
2.997
0
0.2
0.4
IO - Output Current - A
VCON − Voltage Control − V
Figure 19.
12
Submit Documentation Feedback
0.6
Figure 20.
Copyright © 2007–2008, Texas Instruments Incorporated
Product Folder Link(s): TPS62700 TPS62701
TPS62700, TPS62701
www.ti.com................................................................................................................................................... SLVS784B – DECEMBER 2007 – REVISED JUNE 2008
OUTPUT VOLTAGE VOUT
vs
VCON VOLTAGE
VCON MAX THRESHOLD
vs
VOUT TA = 25°C
3.150
3.150
TA = 25°C,
RL = 8W
3.130
VO - Output Voltage - V
VO - Output Voltage - V
3.130
TA = 25°C,
3.110
VI = 4.5 V
3.090
VI = 5.5 V
3.070
VI = 3.5 V
3.050
RL = 8W
3.110
VI = 4.5 V
3.090
3.070
3.050
3.030
1.230
1.232
1.234
1.236
1.238
VCON - Max Threshold - V
Figure 21.
3.030
1.230
1.240
1.232
1.234
1.236
1.238
VCON - Max Threshold - V
Figure 22.
VCON MAX THRESHOLD
vs
VOUT TA = 85°C
3.150
TA = -40°C,
TA = 25°C,
R L = 8W
3.130
VO - Output Voltage - V
VO - Output Voltage - V
1.240
VCON MAX THRESHOLD
vs
VOUT TA = –40°C
3.150
3.130
VI = 3.5 V
VI = 5.5 V
3.110
VI = 4.5 V
3.090
3.070
VI = 5.5 V
VI = 3.5 V
3.110
VI = 4.5 V
3.090
VI = 5.5 V
VI = 3.5 V
3.070
3.050
3.050
3.030
1.230
R L = 8W
1.232
1.234
1.236
1.238
VCON - Max Threshold - V
1.240
3.030
1.230
1.232
Figure 23.
Copyright © 2007–2008, Texas Instruments Incorporated
Product Folder Link(s): TPS62700 TPS62701
1.234
1.236
1.238
1.240
VCON - Max Threshold - V
Figure 24.
Submit Documentation Feedback
13
TPS62700, TPS62701
SLVS784B – DECEMBER 2007 – REVISED JUNE 2008................................................................................................................................................... www.ti.com
VCON MIN THRESHOLD
vs
VOUT TA = 25°C
VCON MIN THRESHOLD
vs
VOUT TA = 85°C
1.310
1.310
TA = 25°C,
1.308
VI = 4.5 V
1.304
1.302
1.300
VI = 3.5 V
VI =2.5 V
1.298
1.296
1.296
1.290
0.515
0.517
0.519
0.521
0.523
0.525
VI = 3.6 V,
L = 3.3 mH, CO = 4.7 mF
VO = 1.3 V,
IO = 50 mA to 250 mA,
VO = 50 mV/div
VCON = AGND
TA = -40°C,
RL = 8W
VI = 4.5 V
VI = 3.5 V
LOAD TRANSIENT RESPONSE VOUT = 1.3 V
1.310
1.306
VI = 2.5 V
VCON - Min Threshold - V
Figure 26.
VCON MIN THRESHOLD
vs
VOUT TA =–40°C
VO - Output Voltage - V
1.298
1.292
0.525
VI = 5.5 V
1.300
1.292
0.517
0.519
0.521
0.523
VCON - Max Threshold - V
Figure 25.
VI = 4.5 V
1.302
1.294
1.308
RL = 8W
1.304
1.294
1.290
0.515
TA = 85°C,
1.306
VI = 5.5 V
VO - Output Voltage - V
1.306
VO - Output Voltage - V
1.308
R L = 8W
VI = 5.5 V
1.304
IO = 200 mA/div
1.302
1.300
VI = 2.5 V
VI = 3.5 V
1.298
250 mA
1.296
IO = 200 mA/div
1.294
50 mA
1.292
1.290
0.515
14
0.517
0.519
0.521
0.523
VCON - Min Threshold - V
Figure 27.
Submit Documentation Feedback
Time base - 10 ms/div
0.525
Figure 28.
Copyright © 2007–2008, Texas Instruments Incorporated
Product Folder Link(s): TPS62700 TPS62701
TPS62700, TPS62701
www.ti.com................................................................................................................................................... SLVS784B – DECEMBER 2007 – REVISED JUNE 2008
LOAD TRANSIENT RESPONSE VOUT = 3.09
VI = 4.2 V,
L = 3.3 mH, CO = 4.7 mF
VO = 3.09 V,
IO = 100 mA to 400 mA,
VCON = AVIN
VO = 100 mV/div
LOAD TRANSIENT RESPONSE VOUT = 3.09 V
VI = 4.2 V,
L = 2.2 mH, CO = 10 mF
VO = 3.09 V,
IO = 100 mA to 400 mA,
VCON = AVIN
VO = 100 mV/div
IO = 200 mA/div
IO = 200 mA/div
400 mA
400 mA
IO = 200 mA/div
IO = 200 mA/div
100 mA
100 mA
Time base - 10 ms/div
Time base - 10 ms/div
Figure 29.
Figure 30.
LOAD TRANSIENT RESPONSE VOUT = 3.09 V
PWM MODE OPERATION VOUT = 1.3 V
VI = 4.2 V,
VO = 3.09 V,
IO = 100 mA to 400 mA,
VCON = AVIN
L = 3.3 mH, CO = 10 mF
VO = 1.3 V
VO = 100 mV/div
VI = 3.6 V,
IL = 200 mA,
VCON = 0 V,
L = 3.3 mH, CO = 4.7 mF
VO = 10 mV/div
IO = 200 mA/div
IO = 100 mA/div
SW 2 V/div
400 mA
IO = 200 mA/div
100 mA
Time base - 10 ms/div
Time base - 200 ns/div
Figure 31.
Figure 32.
Copyright © 2007–2008, Texas Instruments Incorporated
Product Folder Link(s): TPS62700 TPS62701
Submit Documentation Feedback
15
TPS62700, TPS62701
SLVS784B – DECEMBER 2007 – REVISED JUNE 2008................................................................................................................................................... www.ti.com
PWM MODE OPERATION VOUT = 3.09 V
VI = 3.6 V,
IL = 200 mA,
VCON = VI,
VO = 10 mV/div
OUTPUT VOLTAGE RIPPLE AT HIGH DUTY CYCLE
OPERATION
VI = 3.26 V,
IL = 200 mA,
VCON = VI,
VO = 10 mV/div
VO = 3.09 V
L = 3.3 mH, CO = 4.7 mF
IO = 100 mA/div
VO = 3.09 V
L = 3.3 mH, CO = 4.7 mF
IO = 200 mA/div
SW 2 V/div
SW 2 V/div
Time base - 200 ns/div
Time base - 1 ms/div
Figure 33.
Figure 34.
VCON VOLTAGE RESPONSE
VCON OUTPUT VOLTAGE RESPONSE AND
SYNCHRONOUS APPLIED LOAD TRANSIENT
1.4 V
1.4 V
VCON = 1 V/div
VCON = 1
0V
VO = 3.09 V
VO 1 V/div
0V
VO = 3.09 V
VO = 1 V/div
VO = 1.3 V
VI = 4.2 V,
IL = 100 mA/400 mA,
VCON = 0 V/1.4 V
VO = 1.3 V
ICOIL = 500 mA/div
ICOIL = 1000 mA/div
VI = 4.2 V,
RL = 10 W
400 mA
L= 3.3 mH, CO = 4.7 mF
IO = 500 mA/div
Time base - 25 ms/div
Time base - 50 ms/div
Figure 35.
16
Submit Documentation Feedback
100 mA
Figure 36.
Copyright © 2007–2008, Texas Instruments Incorporated
Product Folder Link(s): TPS62700 TPS62701
TPS62700, TPS62701
www.ti.com................................................................................................................................................... SLVS784B – DECEMBER 2007 – REVISED JUNE 2008
STARTUP VOUT 1.3 V
STARTUP VOUT 3.09 V
EN = 5 V/div
EN = 5 V/div
3.09 V
1.3 V
VI = 4.2 V,
VI = 3.6 V,
RL = 10 W,
VCON = 0 V,
VO = 1.3 V
VO = 1 mV/div
RL = 10 W,
VCON = 1.4 V,
VO = 3.09 V
VO = 500 mV/div
0V
0V
II = 500 mA/div
II = 500 mA/div
ICOIL = 500 mA/div
ICOIL = 500 mA/div
Time base - 40 ms/div
Time base - 40 ms/div
Figure 37.
Figure 38.
LINE TRANSIENT RESPONSE
VI = 500 mA/div
4.2 V
VI = 3.6 V to 4.2 V,
IL = 100 mA,
VCON = 1.4 V,
L = 3.3 mH,
3.6V
CO = 10 mF,
VO = 3.09 V
VO = 10 mV/div
ICOIL = 100 mA/div
Time base - 40 ms/div
Figure 39.
Copyright © 2007–2008, Texas Instruments Incorporated
Product Folder Link(s): TPS62700 TPS62701
Submit Documentation Feedback
17
TPS62700, TPS62701
SLVS784B – DECEMBER 2007 – REVISED JUNE 2008................................................................................................................................................... www.ti.com
APPLICATION INFORMATION
VI 2.5 V to 6.0 V
3.3 mH
10 mF
AVIN
VO = 2.5 x VCON
1.3 V to 3.09 V
PVIN
SW
Controller
4.7 mF
FB
ON/OFF
EN
DAC
VCON
AGND
PGND
Figure 40. TPS62700 Application Circuit
VI 3.3 V to 6 V
10 mF
AVIN
2.2/2.7/3.3 mH
PVIN
VO 3.09 V
SW
TPS62701
10 mF
FB
EN
VCON
AGND
PGND
Figure 41. TPS62701 With Fixed VOUT 3.09 V
18
Submit Documentation Feedback
Copyright © 2007–2008, Texas Instruments Incorporated
Product Folder Link(s): TPS62700 TPS62701
TPS62700, TPS62701
www.ti.com................................................................................................................................................... SLVS784B – DECEMBER 2007 – REVISED JUNE 2008
OUTPUT FILTER DESIGN (INDUCTOR AND OUTPUT CAPACITOR)
Inductor Selection
The inductor value has a direct effect on the ripple current. The selected inductor must have adequate ratings for
dc resistance and saturation current. The inductor ripple current (ΔIL) decreases with higher inductance and
increases with higher VIN or VOUT.
Equation 2 calculates the maximum inductor current under static load conditions. The saturation current of the
inductor should be rated higher than the maximum peak inductor current as calculated with Equation 3. This is
recommended because during heavy load transients, the inductor current rises above the calculated value.
V
1 - OUT
VIN
DIL = VOUT ´
I´ f
(2)
DI L
IL _ MAX = IOUT _ MAX +
2
(3)
Where
f = Switching Frequency (2.0 MHz typical)
L = Inductor Value
ΔIL = Peak to Peak inductor ripple current
IL_MAX = Maximum Inductor current
A good approach is to select the inductor current and inductance rating for the maximum switch current limit of
the TPS6270x.
Accepting larger values of ripple current allows the use of lower inductance values, but results in higher
output-voltage ripple, greater core losses, and lower output-current capability.
The total losses of the inductor have a strong impact on the efficiency of the DC/DC conversion and consist of
both the losses in the dc resistance (RL) and the following frequency-dependent components:
• The losses in the core material (magnetic hysteresis loss, especially at high switching frequencies)
• Additional losses in the conductor from the skin effect (current displacement at high frequencies)
• Magnetic-field losses of the neighboring windings (proximity effect)
• Radiation losses
Table 1. List Of Inductors
DIMENSIONS (mm)
INDUCTOR Series
SUPPLIER
2,5 × 2,0 × 1,2
KSLI-252012AG
2,5 × 2,0 × 1,2
MIPSA2520
FDK
Murata
2,5 x 2,0 x 1,2
LQM2HPN
2,8 × 2,6 × 1,4
VLF3014AT
3,9 × 3,9 × 1,7
LPS4018
Copyright © 2007–2008, Texas Instruments Incorporated
Product Folder Link(s): TPS62700 TPS62701
Hitachi Metals
TDK
Coilcraft
Submit Documentation Feedback
19
TPS62700, TPS62701
SLVS784B – DECEMBER 2007 – REVISED JUNE 2008................................................................................................................................................... www.ti.com
Output Capacitor Selection
The advanced, fast-response, voltage-mode control scheme of the TPS6270x allows the use of tiny ceramic
capacitors. Ceramic capacitors with low ESR values have the lowest output-voltage ripple and are
recommended. The output capacitor requires either an X7R or X5R dielectric. Y5V and Z5U dielectric capacitors,
aside from their wide variation in capacitance over temperature, become resistive at high frequencies.
At nominal load current, the device operates in PWM mode, and the RMS ripple current is calculated as:
V
1 - OUT
VIN
1
IRMSCout = VOUT ´
´
L´f
2´ 3
(4)
At nominal load current, the device operates in PWM mode and the overall output voltage ripple is the sum of the
voltage spike caused by the output capacitor ESR plus the voltage ripple caused by charging and discharging the
output capacitor:
V
1 - OUT
æ
ö
VIN
1
DVOUT = VOUT ´
´ çç
+ ESR ÷÷
L´f
è 8 ´ C out ´ f
ø
(5)
Input Capacitor Selection
Because of the nature of the buck converter due to its pulsating input current, a low-ESR input capacitor is
required for best input-voltage filtering, and to minimize interference with other circuits caused by high
input-voltage spikes. For most applications, a 10-µF ceramic capacitor is recommended. The input capacitor can
be increased without any limit for better input-voltage filtering.
Take care when using only small ceramic input capacitors. When a ceramic capacitor is used at the input and the
power is being supplied through long wires, such as from a wall adapter, a load step at the output or VIN step on
the input can induce ringing at the VIN pin. This ringing can couple to the output and be mistaken as loop
instability or could even damage the part by exceeding the maximum ratings.
List Of Capacitors
20
Size
Capacitance µF
0603
0603
Submit Documentation Feedback
TYPE
SUPPLIER
4.7
GRM188R60J475K
Murata
10
GRM188R60J106M
Murata
Copyright © 2007–2008, Texas Instruments Incorporated
Product Folder Link(s): TPS62700 TPS62701
TPS62700, TPS62701
www.ti.com................................................................................................................................................... SLVS784B – DECEMBER 2007 – REVISED JUNE 2008
LAYOUT CONSIDERATIONS
As for all switching power supplies, the PCB layout is an important step in the design. Proper function of the
device demands careful attention to PCB layout. Care must be taken in board layout to achieve the specified
performance. If the layout is not carefully done, the regulator could show poor line and/or load regulation, stability
issues, as well as EMI problems. It is critical to provide a low-inductance, low-impedance ground path. Therefore,
use wide, short traces for the main current paths. The input capacitor should be placed as close as possible to
the IC pins PVIN and PGND. The inductor and output capacitor should be placed close to SW and PGND.
The FB line should be connected directly to the output capacitor and routed away from noisy components and
traces (e.g., SW line).
VOUT
COUT
G
D
N
VCON
ENABLE
0è
L
CIN
VIN
Figure 42. Suggested Board Layout
PACKAGE SUMMARY
CHIP SCALE PACKAGE
(BOTTOM VIEW)
CHIP SCALE PACKAGE
(TOP VIEW)
SW
PGND
D
A3
AGND
B3
FB
C3
A2
C2
A1
PV IN
B1
AVIN
C1
EN
VCON
E
YMLLLL
CKL S
A1
Code:
- YM: 2 digit year/month date code
- LLLL: lot trace code
- S: assembly site code
- CKL: TPS62700 device code
PACKAGE DIMENSIONS
Dimension D
Dimension E2
1,64 mm ± 0,03mm
1,5 mm ± 0,03
Copyright © 2007–2008, Texas Instruments Incorporated
Product Folder Link(s): TPS62700 TPS62701
Submit Documentation Feedback
21
PACKAGE MATERIALS INFORMATION
www.ti.com
17-Nov-2017
TAPE AND REEL INFORMATION
*All dimensions are nominal
Device
Package Package Pins
Type Drawing
SPQ
Reel
Reel
A0
Diameter Width (mm)
(mm) W1 (mm)
TPS62700YZFR
DSBGA
YZF
8
3000
180.0
8.4
TPS62701YZFR
DSBGA
YZF
8
3000
180.0
8.4
Pack Materials-Page 1
B0
(mm)
K0
(mm)
P1
(mm)
W
Pin1
(mm) Quadrant
1.65
1.65
0.81
4.0
8.0
Q1
1.65
1.65
0.81
4.0
8.0
Q1
PACKAGE MATERIALS INFORMATION
www.ti.com
17-Nov-2017
*All dimensions are nominal
Device
Package Type
Package Drawing
Pins
SPQ
Length (mm)
Width (mm)
Height (mm)
TPS62700YZFR
DSBGA
YZF
8
3000
182.0
182.0
20.0
TPS62701YZFR
DSBGA
YZF
8
3000
182.0
182.0
20.0
Pack Materials-Page 2
IMPORTANT NOTICE
Texas Instruments Incorporated (TI) reserves the right to make corrections, enhancements, improvements and other changes to its
semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest issue. Buyers
should obtain the latest relevant information before placing orders and should verify that such information is current and complete.
TI’s published terms of sale for semiconductor products (http://www.ti.com/sc/docs/stdterms.htm) apply to the sale of packaged integrated
circuit products that TI has qualified and released to market. Additional terms may apply to the use or sale of other types of TI products and
services.
Reproduction of significant portions of TI information in TI data sheets is permissible only if reproduction is without alteration and is
accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such reproduced
documentation. Information of third parties may be subject to additional restrictions. Resale of TI products or services with statements
different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the
associated TI product or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements.
Buyers and others who are developing systems that incorporate TI products (collectively, “Designers”) understand and agree that Designers
remain responsible for using their independent analysis, evaluation and judgment in designing their applications and that Designers have
full and exclusive responsibility to assure the safety of Designers' applications and compliance of their applications (and of all TI products
used in or for Designers’ applications) with all applicable regulations, laws and other applicable requirements. Designer represents that, with
respect to their applications, Designer has all the necessary expertise to create and implement safeguards that (1) anticipate dangerous
consequences of failures, (2) monitor failures and their consequences, and (3) lessen the likelihood of failures that might cause harm and
take appropriate actions. Designer agrees that prior to using or distributing any applications that include TI products, Designer will
thoroughly test such applications and the functionality of such TI products as used in such applications.
TI’s provision of technical, application or other design advice, quality characterization, reliability data or other services or information,
including, but not limited to, reference designs and materials relating to evaluation modules, (collectively, “TI Resources”) are intended to
assist designers who are developing applications that incorporate TI products; by downloading, accessing or using TI Resources in any
way, Designer (individually or, if Designer is acting on behalf of a company, Designer’s company) agrees to use any particular TI Resource
solely for this purpose and subject to the terms of this Notice.
TI’s provision of TI Resources does not expand or otherwise alter TI’s applicable published warranties or warranty disclaimers for TI
products, and no additional obligations or liabilities arise from TI providing such TI Resources. TI reserves the right to make corrections,
enhancements, improvements and other changes to its TI Resources. TI has not conducted any testing other than that specifically
described in the published documentation for a particular TI Resource.
Designer is authorized to use, copy and modify any individual TI Resource only in connection with the development of applications that
include the TI product(s) identified in such TI Resource. NO OTHER LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE
TO ANY OTHER TI INTELLECTUAL PROPERTY RIGHT, AND NO LICENSE TO ANY TECHNOLOGY OR INTELLECTUAL PROPERTY
RIGHT OF TI OR ANY THIRD PARTY IS GRANTED HEREIN, including but not limited to any patent right, copyright, mask work right, or
other intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information
regarding or referencing third-party products or services does not constitute a license to use such products or services, or a warranty or
endorsement thereof. Use of TI Resources may require a license from a third party under the patents or other intellectual property of the
third party, or a license from TI under the patents or other intellectual property of TI.
TI RESOURCES ARE PROVIDED “AS IS” AND WITH ALL FAULTS. TI DISCLAIMS ALL OTHER WARRANTIES OR
REPRESENTATIONS, EXPRESS OR IMPLIED, REGARDING RESOURCES OR USE THEREOF, INCLUDING BUT NOT LIMITED TO
ACCURACY OR COMPLETENESS, TITLE, ANY EPIDEMIC FAILURE WARRANTY AND ANY IMPLIED WARRANTIES OF
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND NON-INFRINGEMENT OF ANY THIRD PARTY INTELLECTUAL
PROPERTY RIGHTS. TI SHALL NOT BE LIABLE FOR AND SHALL NOT DEFEND OR INDEMNIFY DESIGNER AGAINST ANY CLAIM,
INCLUDING BUT NOT LIMITED TO ANY INFRINGEMENT CLAIM THAT RELATES TO OR IS BASED ON ANY COMBINATION OF
PRODUCTS EVEN IF DESCRIBED IN TI RESOURCES OR OTHERWISE. IN NO EVENT SHALL TI BE LIABLE FOR ANY ACTUAL,
DIRECT, SPECIAL, COLLATERAL, INDIRECT, PUNITIVE, INCIDENTAL, CONSEQUENTIAL OR EXEMPLARY DAMAGES IN
CONNECTION WITH OR ARISING OUT OF TI RESOURCES OR USE THEREOF, AND REGARDLESS OF WHETHER TI HAS BEEN
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
Unless TI has explicitly designated an individual product as meeting the requirements of a particular industry standard (e.g., ISO/TS 16949
and ISO 26262), TI is not responsible for any failure to meet such industry standard requirements.
Where TI specifically promotes products as facilitating functional safety or as compliant with industry functional safety standards, such
products are intended to help enable customers to design and create their own applications that meet applicable functional safety standards
and requirements. Using products in an application does not by itself establish any safety features in the application. Designers must
ensure compliance with safety-related requirements and standards applicable to their applications. Designer may not use any TI products in
life-critical medical equipment unless authorized officers of the parties have executed a special contract specifically governing such use.
Life-critical medical equipment is medical equipment where failure of such equipment would cause serious bodily injury or death (e.g., life
support, pacemakers, defibrillators, heart pumps, neurostimulators, and implantables). Such equipment includes, without limitation, all
medical devices identified by the U.S. Food and Drug Administration as Class III devices and equivalent classifications outside the U.S.
TI may expressly designate certain products as completing a particular qualification (e.g., Q100, Military Grade, or Enhanced Product).
Designers agree that it has the necessary expertise to select the product with the appropriate qualification designation for their applications
and that proper product selection is at Designers’ own risk. Designers are solely responsible for compliance with all legal and regulatory
requirements in connection with such selection.
Designer will fully indemnify TI and its representatives against any damages, costs, losses, and/or liabilities arising out of Designer’s noncompliance with the terms and provisions of this Notice.
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2017, Texas Instruments Incorporated
工商网监
湘ICP备2023018690号
