TSB43CA43A
TSB43CB43A
TSB43CA42
www.ti.com
SLLA211 – JUNE 2006
iceLynx-Micro IEEE 1394a-2000 Consumer Electronics Solution
FEATURES
•
•
•
•
1394 Features
– Integrated 400 Mbps 3-port PHY
– Compliant with IEEE 1394-1995 and IEEE
1394a-2000 standards
– Supports bus manager functions and
automatic 1394 self-ID verification.
– Separate Async Ack FIFO decreases the
ack-tracking burden on in-CPU and ex-CPU
DTLA Encryption Support for MPEG2-DVB,
DSS, DV, and Audio (TSB43CA43A and
TSB43CA42 Only)
– Two M6 baseline ciphers (one per HSDI
port)
• Content key generation from exchange
key
– AKE acceleration features in hardware
• Random Number Generator
• Secure Hash Algorithm, Revision 1
(SHA-1)
– Other AKE acceleration features
• Elliptical curve digital signature algorithm
(EC-DCA) both signature and verification
• Elliptical curve Diffie-Hellman (EC-DH),
first phase value and shared secret
calculation
• 160-bit math functions
High Speed Data Interface (HSDI)
– Two configurable high speed data
interfaces support the following audio and
video modes:
• MPEG2-DVB interface
• MPEG2-DSS interface
• DV codec interface
• IEC60958 interface
• Audio DAC interface
• SACD interface
External CPU Interface
– 16-bit parallel asynchronous I/O-type
– 16-bit parallel synchronous I/O-type
– 16-bit parallel synchronous memory type
•
•
•
•
Internal ARM7
– 50-MHz operating frequency
– 32-bit and thumb (16-bit) mode support
– UART included for communication
– 256K bytes of program memory included on
chip
– ARM JTAG included for software debug
Data Buffers
– Large 16.5K byte total FIFO
– Programmable data/space available
indicators for buffer flow control
Hardware Packet Formatting for the
Following Standards
– DVB MPEG2 transport stream (IEC61883-4)
– DSS MPEG2 transport stream per standard
– DV Stream (IEC 61883-2) SD-DV
– Audio over 1394 (IEC 61883-6)
– Audio Music Protocol (version 1.0 and
enhancements)
– Asynchronous and asynchronous stream
(as defined by IEEE 1394)
Additional Features
– PID filtering for transmit function (up to 16
separate PIDs per HSDI)
– Packet insertion – two insertion buffers per
HSDI
– 11 general-purpose inputs/outputs (GPIOs)
– Interrupt driven to minimize CPU polling.
– Single 3.3-V supply
– JTAG interface to support post-assembly
scan of device I/O – boundary scan
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2006, Texas Instruments Incorporated
TSB43CA43A
TSB43CB43A
TSB43CA42
www.ti.com
SLLA211 – JUNE 2006
DESCRIPTION
The iceLynx-Micro (consumer electronics link with integrated microcontroller and physical layer (PHY)) is a high
performance 1394 link-layer device designed as a total solution for digitally interfacing advanced audio/video
consumer electronics applications. The device is offered in both a DTCP encryption/decryption version
(TSB43CA43A and TSB43CA42) and a non-DTCP encryption/decryption version (TSB43CB43).
In addition to supporting transmit and receive of MPEG2 and DSS formatted transport streams with encryption
and decryption, the iceLynx-Micro supports the IEC 61883-6 and audio music protocol standards for audio
format and packetizing and asynchronous and asynchronous stream (as defined by 1394).
The device also features an embedded ARM7TDMI microprocessor core with access to 256K bytes of internal
program memory. The ARM7 is embedded to process 1394 specific transactions, thus significantly reducing the
processing power required by the host CPU and the development time required by the user. The ARM7 is
accessed from the 16/1-bit host CPU interface, from a UART communication port, or from a JTAG debug port.
The iceLynx-Micro integrated 3-port PHY allows the user enhanced flexibility as two additional devices can be
utilized in a system application. The PHY’s speeds are capable of running at 100 Mbps, 200 Mbps, or 400 Mbps.
The PHY follows all requirements as stated in the IEEE 1394-1995 and IEEE 1394a-2000 standards.
The TSB43CA43A and TSB43CA42 version of iceLynx-Micro incorporates two M6 baseline ciphers (one per
HSDI port) per the 5C specification to support transmit and receive of MPEG2 formatted transport streams with
encryption and decryption. The TSB43CB43 version of iceLynx-Micro is identical to the TSB43CA43A without
implementation of the encryption/decryption features. The TSB43CB43 device allows customers that do not
require the encryption/decryption features to incorporate iceLynx-Micro without becoming DTLA licensees. Both
devices support the IEC 61883-6 and audio music protocol standards for audio format and packetizing.
NOTE:
This product is for high-volume CE applications only. For a complete datasheet or
more information contact support@ti.com.
2
Submit Documentation Feedback
PACKAGE OPTION ADDENDUM
www.ti.com
26-May-2021
PACKAGING INFORMATION
Orderable Device
Status
(1)
Package Type Package Pins Package
Drawing
Qty
Eco Plan
(2)
Lead finish/
Ball material
MSL Peak Temp
Op Temp (°C)
(3)
Device Marking
(4/5)
(6)
TSB43CB43APGF
ACTIVE
LQFP
PGF
176
40
RoHS & Green
NIPDAU
Level-3-260C-168 HR
-20 to 70
TSB43CB43A
(1)
The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2)
RoHS: TI defines "RoHS" to mean semiconductor products that are compliant with the current EU RoHS requirements for all 10 RoHS substances, including the requirement that RoHS substance
do not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, "RoHS" products are suitable for use in specified lead-free processes. TI may
reference these types of products as "Pb-Free".
RoHS Exempt: TI defines "RoHS Exempt" to mean products that contain lead but are compliant with EU RoHS pursuant to a specific EU RoHS exemption.
Green: TI defines "Green" to mean the content of Chlorine (Cl) and Bromine (Br) based flame retardants meet JS709B low halogen requirements of
很抱歉,暂时无法提供与“TSB43CB43APGF”相匹配的价格&库存,您可以联系我们找货
免费人工找货