ECOC-2522-40.000-3HS

The ECOC-2522 is a SMD CMOS SC-Cut OCXO. The 25.4 x 22.0 x 12.2 mm SMD package is ideal for Cellular, Radar, Test & Measurement and IOT applications. ECOC-2522 SMD OCXO OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS ECOC-2522 OCXO PARAMETERS CONDITIONS ECOC-2522 MIN Frequency Range TYP 2.000 0 ~ +50°C (F Opt) -20 ~ +70°C (G Opt) -40 ~ +75°C (H Opt) Frequency Stability • • • • SC Cut 25.4 x 22 mm Footprint Extended Temp Range RoHS Compliant Power Consumption Power Consumption Supply Voltage Supply Voltage Aging Waveform Output voltage Level Output Load Rise & Fall time Duty Cycle Waveform Peak Power Output Load Spurious Response Phase Noise @ 1 Hz Offset @ 10 Hz Offset @ 100 Hz Offset @ 1,000 Hz Offset @ 10,000 Hz Offset @ 100 KHz Offset @ 1 MHz Offset Control Voltage Range Frequency Pull Range VC Port Impedance Storage Temperature Supply Voltage ±5% Warm-Up @+25°C (≤ 3 minutes) Load Change (±10%) At turn on Steady State 3.3 Option 5.0 Option Daily (after 30 days) Yearly 10-Years 3.135 4.75 3.3 5.0 UNITS MAX 100.000 ± 5.0 ± 10.0 ±30.0 ±20.0 MHz ppb ppb ppb ppb ±100.0 ppb ±0.2 3.6 1.4 3.465 5.25 ppm Watts Watts V V ±1.0 ppb ±100 ±500 ppb ppb CMOS VOL:10%Vdd max./VOH:90%Vdd min.V DC 15 pF 10%Vdd – 90%Vdd 5 ns @ ½ Vdd 45/55 % Sinewave 2.0 dBm 50 Ω -70 dBc @ 10 MHz Carrier, Vdd 3.3V -90 dBc/Hz -120 dBc/Hz -135 dBc/Hz -145 dBc/Hz -150 dBc/Hz -150 dBc/Hz -150 dBc/Hz Positive Slope 0 Vdd/2 Vdd V ±0.7 ppm 10 kΩ -40 +100 °C Rev.2016 15351 West 109th Street | Lenexa, KS 66219 | Phone: 913.782.7787 | Fax: 913.782.6991 | www.ecsxtal.com ECOC-2522 SMD OCXO PART NUMBERING GUIDE: Example ECOC-2522-10.000-3-F-C ECOC - SERIES 2522 25.4 x 22 mm OCXO FREQUENCY VOLTAGE 10.000 MHz 3 = +3.3V 5 = +5.0V STABILITY /TEMP F = ±5 ppb G = ±10 ppb H = ±30 ppb 0 ~ +50°C -20 ~ +70°C -40 ~ +75°C OUTPUT C = CMOS S = Sinewave DIMENSIONS (mm) PAD CONNECTIONS 1 Voltage Control 2 V Ref 3 Supply Voltage 4 Output 5 Ground FREQUENCY MHz 10.000 12.800 13.000 16.384 20.000 38.400 38.800 40.000 100.000 SOLDER PROFILE Peak solder Temp +260°C Max 10 sec Max. 2 Cycles Max. MSL 1, Lead Finish Au Figure 1) Top, Side, Bottom and suggested Land pattern. 15351 West 109th Street | Lenexa, KS 66219 | Phone: 913.782.7787 | Fax: 913.782.6991 | www.ecsxtal.com