550C372T450DF2B

click here to see hardware and mounting options Type 550C 105 °C High Ripple, Inverter Grade, Aluminum Ultra-Ripple, Long Life Screw Terminal Type Type 550C is the standard for motor drive and other high-ripple, longlife applications. It boasts more than 25% extra ripple capability per can size, but less capacitance than Type 520C. Expected operating life is more than 100,000 hours in typical applications. Type 550C is rated for 20,000 h life with full ripple current, rated voltage, 85 ºC and 100 lfm airflow while mounted horizontally. Horizontal mounting is more severe than vertical mounting. The extended cathode foil of the 550C assures heat flow from the capacitor element to the can in all orientations. Highlights Specifications - Load life up to 20,000 hours at 85 ºC - High ripple current - ESRs to 7 mΩ Temperature Range –40 °C to +105 °C Rated Voltage Range 200 Vdc to 500 Vdc Capacitance Range 680 µF to 35,000 µF Capacitance Tolerance –10% +50% Leakage Current ≤3 √CV µA, 4 mA max, 5 minutes Ripple Current Multipliers Ambient Temperature 45 ºC 55 ºC 65 ºC 75 ºC 85 ºC 95 ºC 105 ºC 1.66 1.52 1.37 1.20 1.00 0.75 0.36 Frequency 50 60 120 360 Hz Hz Hz Hz 1 3/8” & 2 1/2” Diameters 200 to 350 V 0.77 0.82 1.00 1.21 400 to 500 V 0.73 0.78 1.00 1.33 3” & 3 1/2” Diameters 200 to 350 V 0.80 0.85 1.00 1.17 400 to 500 V 0.73 0.79 1.00 1.31 Low Temperature Characteristics Impedance ratio: Z–20⁰C ∕ Z+25⁰C ≤ 3 (200–500 Vdc) Endurance Life Test 5,000 hr. load life at 85 ºC 10,000 hr. load life at 105 ºC ∆ Capacitance ±20% ESR 200% of limit DCL 100% of limit Operating Life 1 5 10 kHz kHz kHz & up 1.32 1.37 1.38 1.53 1.66 1.68 1.24 1.28 1.29 1.51 1.63 1.65 Diameter Rated Voltage and Ripple Current @105 ºC (hours) Rated Voltage @105 ºC (hours) 2½” (66) 15000 18000 3” (77) 15000 18000 3½ (90) 15000 18000 Load life up to 20000 hours at 105 ºC with 90% VDC Shelf Life Test 500 h at 105 °C Capacitance 100% of limit ESR 100% of limit DCL 100% of limit Vibration 10 to 55 Hz, 0.06” and 10 g max, 1.5 h each of two axis Regulatory Information CDM Cornell Dubilier • 140 Technology Place • Liberty, SC 29657 • Phone: (864)843-2277 • Fax: (864)843-3800 Type 550C 105 °C High Ripple, Inverter Grade, Aluminum Ultra-Ripple, Long Life Screw Terminal Type Part Numbering System 550C 812 T 450 FG 2 D S Type Capacitance Tolerance Voltage Case Code Insulation 0= None 200 = 200 Vdc 812 =8100 µF M = ±20% 1= Polyester U = –10%+75% 2= PVC T = –10%+50% Terminal A = Low Post B = High Post D = High Current, Low Post E = High Current, Standard insulation is 0.008-in PVC sleeve with High Post 0.01-in polypropylene end disk. F = M5 Post Polyester insulation is not available for 3.5 inch M = M5 Post, Small diameter units. G = M6 Low Post H = M6 High Post Outline Drawing Can Style Blank= Standard Can S= Stud Bottom P= Stud with Thermal Pad D Stud Dimensions + S H +0 -.062 (+0 -1.57) Case Stud P± 0.039” Diam. Thread (±1.0 mm) 1.375 M8 0.470” (12.0) 1.750 M8 0.470” (12.0) 2.000 M12 0.630” (16.0) 2.500 M12 0.630” (16.0) 3.000 M12 0.630” (16.0) 3.500 M12 0.630” (16.0) L NOTE: With the stud-mount feature, a thermally-conductive disk can be inserted in the bottom flush with the outer insulating sleeve. This reduces the thermal resistance through the can bottom by 0.3 °C/W. Can Style P. P Optional Stud Terminal Dimensions For Case Terminal Style Low Post Post Diameter H max min Full Thread Torque Diameters Code in mm in mm Thread in mm in∙lb N∙m 1⅜ to 3 A 0.314 8.0 0.094 2.4 10–32 0.218 5.5 25 2.82 High Post 1⅜ to 3 B 0.314 8.0 0.281 7.1 10–32 0.375 9.5 25 2.82 High Current, Low 2½ to 3½ D 0.684 17.4 0.125 3.2 ¼–28 0.344 8.7 50 5.65 High Current, High 2½ to 3½ E 0.684 17.4 0.281 7.1 ¼–28 0.469 11.9 60 6.78 M5 Post, Small 1⅜ to 2 M 0.314 8.0 0.281 7.1 M5 0.375 9.5 25 2.82 M5 Post 2½ & 3 F 0.512 13.0 0.230 5.8 M5 0.344 8.7 25 2.82 M6 Low Post 2½ to 3½ G 0.684 17.4 0.125 3.2 M6 0.344 8.7 50 5.65 M6 High Post 2½ to 3½ H 0.684 17.4 0.281 7.1 M6 0.469 11.9 60 6.78 NOTE: Only high post and M5 post terminals are available at 550 Vdc as they meet the required creepage distance. CDM Cornell Dubilier • 140 Technology Place • Liberty, SC 29657 • Phone: (864)843-2277 • Fax: (864)843-3800 Type 550C 105 °C High Ripple, Inverter Grade, Aluminum Ultra-Ripple, Long Life Screw Terminal Type Uninsulated Case Dimensions Diam. (D) For insulated case, add 0.024”(0.610 mm) to “D”and 0.030”(0.762 mm) to length. Length (L) Terminals (S) Case Code ±.031 Inches ±.78 mm ±.062 Inches ±1.57 mm ±0.015 Inches ±.38 mm Typical Weight oz g AK 1.375 34.93 1.625 41.28 0.50 12.70 1.9 54 AA 1.375 34.93 2.125 53.98 0.50 12.70 2.0 57 AH 1.375 34.93 2.625 66.68 0.50 12.70 2.7 77 AB 1.375 34.93 3.125 79.38 0.50 12.70 3.3 94 AJ 1.375 34.93 3.625 92.08 0.50 12.70 3.8 108 AC 1.375 34.93 4.125 104.78 0.50 12.70 4.4 125 AD 1.375 34.93 4.625 117.48 0.50 12.70 5.1 145 AE 1.375 34.93 5.125 130.18 0.50 12.70 6.8 193 AF 1.375 34.93 5.625 142.88 0.50 12.70 8.1 230 EA 1.750 44.45 2.125 53.98 0.75 19.05 2.7 76 EH 1.750 44.45 2.625 66.68 0.75 19.05 3.8 108 EB 1.750 44.45 3.125 79.38 0.75 19.05 5.1 145 EJ 1.750 44.45 3.625 92.08 0.75 19.05 6.8 193 EC 1.750 44.45 4.125 104.78 0.75 19.05 8.1 230 ED 1.750 44.45 4.625 117.48 0.75 19.05 9.0 255 EE 1.750 44.45 5.125 130.18 0.75 19.05 9.5 269 EF 1.750 44.45 5.625 142.88 0.75 19.05 10.5 298 BA 2.000 50.80 2.125 53.98 0.88 22.23 5.4 153 BH 2.000 50.80 2.625 66.68 0.88 22.23 6.1 173 BB 2.000 50.80 3.125 79.38 0.88 22.23 6.8 193 BJ 2.000 50.80 3.625 92.08 0.88 22.23 8.2 232 BC 2.000 50.80 4.125 104.78 0.88 22.23 9.5 269 BD 2.000 50.80 4.625 117.48 0.88 22.23 10.3 292 BE 2.000 50.80 5.125 130.18 0.88 22.23 10.7 303 BF 2.000 50.80 5.625 142.88 0.88 22.23 13.0 369 CH 2.500 63.50 2.625 66.68 1.13 28.58 9.2 261 CB 2.500 63.50 3.125 79.38 1.13 28.58 10.4 295 CJ 2.500 63.50 3.625 92.08 1.13 28.58 12.7 361 CC 2.500 63.50 4.125 104.78 1.13 28.58 15.0 425 CD 2.500 63.50 4.625 117.48 1.13 28.58 17.2 488 CE 2.500 63.50 5.125 130.18 1.13 28.58 19.3 547 CF 2.500 63.50 5.625 142.88 1.13 28.58 21.4 607 DB 3.000 76.20 3.125 79.38 1.25 31.75 16.7 473 DJ 3.000 76.20 3.625 92.08 1.25 31.75 20.0 567 DC 3.000 76.20 4.125 104.78 1.25 31.75 22.2 629 DD 3.000 76.20 4.625 117.48 1.25 31.75 25.5 723 DE 3.000 76.20 5.125 130.18 1.25 31.75 30.0 850 DF 3.000 76.20 5.625 142.88 1.25 31.75 31.9 904 DM 3.000 76.20 6.625 168.28 1.25 31.75 34.4 933.5 DP 3.000 76.20 5.875 149.23 1.25 31.75 32.8 931 DN 3.000 76.20 7.625 193.68 1.25 31.75 39.5 1119 DG 3.000 76.20 8.625 219.08 1.25 31.75 43.3 1227 FC 3.500 88.90 4.125 104.78 1.25 31.75 30.0 850 FD 3.500 88.90 4.625 117.48 1.25 31.75 34.4 976 FE 3.500 88.90 5.125 130.18 1.25 31.75 40.5 1148 FF 3.500 88.90 5.625 142.88 1.25 31.75 43.1 1221 FP 3.500 88.90 5.875 149.23 1.25 31.75 44.3 1257 FN 3.500 88.90 7.625 193.68 1.25 31.75 53.3 1512 FG 3.500 88.90 8.625 219.08 1.25 31.75 58.5 1658 FM 3.500 88.90 6.625 168.28 1.25 31.75 46.4 1315.4 CDM Cornell Dubilier • 140 Technology Place • Liberty, SC 29657 • Phone: (864)843-2277 • Fax: (864)843-3800 Type 550C 105 °C High Ripple, Inverter Grade, Aluminum Ultra-Ripple, Long Life Screw Terminal Type Ratings ESR MAX. Ripple Current Max MFD CATALOG NO. ESR MAX. Ripple Current Max @ 25ºC @85ºC @ 105ºC CASE SIZE 120 Hz 120 Hz 120 Hz DIA X LENGTH (mOhms) (A) (A) MFD 200 VDC (250 VDC SURGE) CATALOG NO. @ 25ºC @85ºC 120 Hz 120 Hz (mOhms) (A) @ 105ºC CASE SIZE 120 Hz DIA X LENGTH (A) 250 VDC (300 VDS SURGE) 2800 550C282T200CH2B 45.4 10.5 3.8 2 1/2 X 2 5/8 15000 550C153T250DN2D 10.9 34.4 12.4 3 X 7 5/8 4000 550C402T200CB2B 32.6 13.2 4.7 2 1/2 X 3 1/8 15000 550C153T250FF2D 12.8 31.2 11.2 3 1/2 X 5 5/8 5100 550C512T200CJ2B 25.5 15.6 5.6 2 1/2 X 3 5/8 16000 550C163T250FP2D 12.2 32.3 11.6 3 1/2 X 5 7/8 6200 550C622T200CC2B 20.6 18.1 6.5 2 1/2 X 4 1/8 17000 550C173T250DG2D 9.2 38.3 13.8 3 X 8 5/8 7300 550C732T200CD2B 17.6 20.3 7.3 2 1/2 X 4 5/8 22000 550C223T250FN2D 9.9 39.5 14.2 3 1/2 X 7 5/8 7300 550C732T200DJ2B 21.2 19.1 6.9 3 X 3 5/8 25000 550C253T250FG2D 8.4 43.7 15.7 3 1/2 X 8 5/8 8500 550C852T200CE2B 15.5 22.5 8.1 2 1/2 X 5 1/8 9000 550C902T200DC2B 17.6 21.9 7.9 3 X 4 1/8 1600 550C162T300CH2B 90.7 7.4 2.7 2 1/2 X 2 5/8 9600 550C962T200CF2B 13.8 24.5 8.8 2 1/2 X 5 5/8 2200 550C222T300CB2B 65.1 9.3 3.4 2 1/2 X 3 1/8 11000 550C113T200DD2B 15.1 24.5 8.8 3 X 4 5/8 2800 550C282T300CJ2B 50.8 11.1 4.0 2 1/2 X 3 5/8 12000 550C123T200DE2B 13.3 27.0 9.7 3 X 5 1/8 3400 550C342T300DB2B 43.7 12.7 4.6 3 X 3 1/8 13000 550C133T200FC2D 18.0 23.8 8.6 3 1/2 X 4 1/8 3500 550C352T300CC2B 41.6 12.8 4.6 2 1/2 X 4 1/8 14000 550C143T200DF2B 11.9 29.4 10.6 3 X 5 5/8 4100 550C412T300CD2B 35.5 14.4 5.2 2 1/2 X 4 5/8 15000 550C153T200DP2D 11.4 30.6 11.0 3 X 5 7/8 4400 550C442T300DJ2B 34.2 15.1 5.4 3 X 3 5/8 16000 550C163T200FD2D 15.3 26.8 9.6 3 1/2 X 4 5/8 4700 550C472T300CE2B 31.0 15.9 5.7 2 1/2 X 5 1/8 18000 550C183T200FE2D 13.6 29.4 10.6 3 1/2 X 5 1/8 5300 550C532T300CF2B 27.1 17.5 6.3 2 1/2 X 5 5/8 20000 550C203T200FF2D 12.2 31.9 11.5 3 1/2 X 5 5/8 5400 550C542T300DC2B 28.3 17.3 6.2 3 X 4 1/8 21000 550C213T200DN2D 9.5 36.8 13.2 3 X 7 5/8 6400 550C642T300DD2B 24.1 19.4 7.0 3 X 4 5/8 22000 550C223T200FP2D 11.6 33.2 11.9 3 1/2 X 5 7/8 7200 550C722T300FC2D 21.8 21.7 7.8 3 1/2 X 4 1/8 24000 550C243T200DG2D 8.2 40.4 14.6 3 X 8 5/8 7400 550C742T300DE2B 21.1 21.5 7.7 3 X 5 1/8 30000 550C303T200FN2D 9.3 40.6 14.6 3 1/2 X 7 5/8 8300 550C832T300DF2B 18.8 23.4 8.4 3 X 5 5/8 35000 550C353T200FG2D 7.9 44.9 16.2 3 1/2 X 8 5/8 8600 550C862T300FD2D 18.6 24.3 8.8 3 1/2 X 4 5/8 250 VDC (300 VDC SURGE) 300 VDC (350 VDC SURGE) 8800 550C882T300DP2B 17.9 24.3 8.8 3 X 5 7/8 2100 550C212T250CH2B 58.6 9.3 3.3 2 1/2 X 2 5/8 9900 550C993T300FE2D 16.2 26.8 9.7 3 1/2 X 5 1/8 4200 550C422T250DB2B 33.5 14.5 5.2 2 1/2 X 3 1/8 11000 550C113T300FF2D 14.0 29.6 10.7 3 1/2 X 5 5/8 4600 550C462T250CC2B 27.1 15.8 5.7 2 1/2 X 4 1/8 12000 550C123T300FP2D 13.3 30.8 11.1 3 1/2 X 5 7/8 5400 550C542T250CD2B 23.1 17.8 6.4 2 1/2 X 4 5/8 12000 550C123T300DN2B 14.4 30.0 10.8 3 X 7 5/8 5400 550C542T250DJ2B 25.9 17.3 6.2 3 X 3 5/8 14000 550C143T300DG2D 12.2 33.3 12.0 3 X 8 5/8 6200 550C622T250CE2B 19.8 19.9 7.2 2 1/2 X 5 1/8 16000 550C163T300FN2D 10.7 38.1 13.7 3 1/2 X 7 5/8 6600 550C662T250DC2B 21.5 19.9 7.1 3 X 4 1/8 18000 550C183T300FG2D 8.9 42.3 15.2 3 1/2 X 8 5/8 7100 550C712T250CF2B 17.6 21.7 7.8 2 1/2 X 5 5/8 7800 550C782T250DD2B 18.3 22.3 8.0 3 X 4 5/8 1300 550C132T350CH2B 100.6 2.5 2 1/2 X 2 5/8 9000 550C902T250DE2B 16.1 24.6 8.9 3 X 5 1/8 1800 550C182T350CB2B 72.0 8.8 3.2 2 1/2 X 3 1/8 9700 550C973T250FC2D 19.1 23.1 8.3 3 1/2 X 4 1/8 2300 550C232T350CJ2B 56.3 10.5 3.8 2 1/2 X 3 5/8 10000 550C103T250DF2B 14.4 26.8 9.6 3 X 5 5/8 2800 550C282T350CC2B 46.4 12.1 4.4 2 1/2 X 4 1/8 11000 550C113T250DP2B 13.2 28.2 10.2 3 X 5 7/8 2800 550C282T350DB2B 47.8 12.2 4.4 3 X 3 1/8 11000 550C113T250FD2D 16.6 25.8 9.3 3 1/2 X 4 5/8 3300 550C332T350CD2B 39.4 13.6 4.9 2 1/2 X 4 5/8 13000 550C133T250FE2D 14.5 28.4 10.2 3 1/2 X 5 1/8 3600 550C362T350DJ2B 37.4 14.5 5.2 3 X 3 5/8 350 VDC (400 VDC SURGE) 7.1 CDM Cornell Dubilier • 140 Technology Place • Liberty, SC 29657 • Phone: (864)843-2277 • Fax: (864)843-3800 Type 550C 105 °C High Ripple, Inverter Grade, Aluminum Ultra-Ripple, Long Life Screw Terminal Type ESR MAX. Ripple Current Max MFD CATALOG NO. @ 25ºC @85ºC 120 Hz 120 Hz (mOhms) (A) @ 105ºC ESR MAX. Ripple Current Max CASE SIZE 120 Hz DIA X LENGTH MFD CATALOG NO. (A) 350 VDC (400 VDC SURGE) @ 25ºC @85ºC 120 Hz 120 Hz (mOhms) (A) @ 105ºC CASE SIZE 120 Hz DIA X LENGTH (A) 450 VDC (500 VDC SURGE) 3800 550C382T350CE2B 34.5 15.1 5.4 2 1/2 X 5 1/8 1500 550C152T450CC2B 57.5 10.9 3.9 2 1/2 X 4 1/8 4300 550C432T350CF2B 29.9 16.7 6.0 2 1/2 X 5 5/8 1500 550C152T450DB2B 55.0 11.3 4.1 3 X 3 1/8 4400 550C442T350DC2B 30.9 16.6 6.0 3 X 4 1/8 1800 550C182T450CD2B 49.0 12.2 4.4 2 1/2 X 4 5/8 5100 550C512T350DD2B 26.3 18.6 6.7 3 X 4 5/8 2000 550C202T450DJ2B 42.9 13.5 4.8 3 X 3 5/8 5800 550C582T350FC2D 23.8 20.8 7.5 3 1/2 X 4 1/8 2100 550C212T450CE2B 40.5 13.9 5.0 2 1/2 X 5 1/8 5900 550C592T350DE2B 23.0 20.6 7.4 3 X 5 1/8 2400 550C242T450CF2B 35.4 15.3 5.5 2 1/2 X 5 5/8 6700 550C672T350DF2B 20.5 22.4 8.1 3 X 5 5/8 2400 550C242T450DC2B 35.5 15.5 5.6 3 X 4 1/8 6900 550C692T350FD2D 20.3 23.3 8.4 3 1/2 X 4 5/8 2900 550C292T450DD2B 30.3 17.4 6.3 3 X 4 5/8 7100 550C712T350DP2B 19.5 23.3 8.4 3 X 5 7/8 3200 550C322T450FC2D 26.6 19.6 7.1 3 1/2 X 4 1/8 8000 550C802T350FE2D 17.7 25.7 9.3 3 1/2 X 5 1/8 3300 550C332T450DE2B 26.3 19.2 6.9 3 X 5 1/8 9000 550C902T350FF2D 15.3 28.4 10.2 3 1/2 X 5 5/8 3700 550C372T450DF2B 23.4 20.9 7.5 3 X 5 5/8 9500 550C952T350FP2D 14.5 29.6 10.6 3 1/2 X 5 7/8 3800 550C382T450FD2D 22.6 22.1 7.9 3 1/2 X 4 5/8 9600 550C962T350DN2B 15.4 29.0 10.4 3 X 7 5/8 4000 550C402T450DP2B 22.3 21.8 7.8 3 X 5 7/8 11000 550C113T350DG2D 12.9 32.3 11.6 3 X 8 5/8 4400 550C442T450FE2D 19.7 24.3 8.8 3 1/2 X 5 1/8 13000 550C133T350FN2D 11.5 36.6 13.2 3 1/2 X 7 5/8 5000 550C502T450FF2D 17.5 26.5 9.6 3 1/2 X 5 5/8 15000 550C153T350FG2D 9.6 40.7 14.6 3 1/2 X 8 5/8 5300 550C532T450FP2D 16.6 27.6 9.9 3 1/2 X 5 7/8 5500 550C552T450DN2B 18.0 26.8 9.6 3 X 7 5/8 990 550C991T400CH2B 110.4 6.7 2.4 2 1/2 X 2 5/8 6400 550C642T450DG2D 15.2 29.8 10.7 3 X 8 5/8 1400 550C142T400CB2B 79.1 8.4 3.0 2 1/2 X 3 1/8 7100 550C712T450FN2D 13.1 34.3 12.3 3 1/2 X 7 5/8 1800 550C182T400CJ2B 61.7 10.0 3.6 2 1/2 X 3 5/8 8100 550C813T450FG2D 11.0 38.2 13.7 3 1/2 X 8 5/8 2200 550C222T400CC2B 50.8 11.6 4.2 2 1/2 X 4 1/8 2200 550C222T400DB2B 53.0 11.6 4.2 3 X 3 1/8 680 550C681T500CH2B 228.5 4.7 1.7 2 1/2 X 2 5/8 2600 550C262T400CD2B 43.3 13.0 4.7 2 1/2 X 4 5/8 680 550C961T500CB2B 163.6 5.9 2.1 2 1/2 X 3 1/8 2800 550C282T400DJ2B 41.4 13.7 4.9 3 X 3 5/8 1200 550C122T500CJ2B 126.4 7.0 2.5 2 1/2 X 3 5/8 3000 550C302T400CE2B 37.7 14.4 5.2 2 1/2 X 5 1/8 1400 550C142T500DB2B 100.0 8.4 3.0 3 X 3 1/8 3400 550C342T400CF2B 33.5 15.8 5.7 2 1/2 X 5 5/8 1500 550C152T500CC2B 98.9 8.3 3.0 2 1/2 X 4 1/8 3400 550C342T400DC2B 34.0 15.8 5.7 3 X 4 1/8 1800 550C182T500CD2B 84.0 9.3 3.4 2 1/2 X 4 5/8 4000 550C402T400DD2B 29.0 17.7 6.4 3 X 4 5/8 1900 550C192T500DJ2B 76.6 10.1 3.6 3 X 3 5/8 4600 550C462T400FC2D 25.8 20.0 7.2 3 1/2 X 4 1/8 2000 550C202T500CE2B 77.0 10.1 3.6 2 1/2 X 5 1/8 4700 550C472T400DE2B 24.8 19.8 7.1 3 X 5 1/8 2300 550C232T500DC2B 62.5 11.6 4.2 3 X 4 1/8 5300 550C532T400DF2B 22.0 21.6 7.8 3 X 5 5/8 2300 550C232T500CF2B 64.6 11.4 4.1 2 1/2 X 5 5/8 5400 550C542T400FD2D 21.9 22.4 8.1 3 1/2 X 4 5/8 2700 550C272T500DD2B 52.4 13.2 4.7 3 X 4 5/8 5600 550C562T400DP2B 21.0 22.4 8.1 3 X 5 7/8 3100 550C312T450DE2B 45.1 14.7 5.3 3 X 5 1/8 6200 550C622T400FE2D 19.1 24.7 8.9 3 1/2 X 5 1/8 3200 550C322T500FC2D 45.0 15.1 5.4 3 1/2 X 4 1/8 7100 550C712T400FF2D 16.0 27.3 9.8 3 1/2 X 5 5/8 3500 550C352T500DF2B 40.0 16.1 5.8 3 X 5 5/8 7500 550C752T400FP2D 15.7 28.4 10.2 3 1/2 X 5 7/8 3700 550C372T500DP2B 37.6 16.8 6.0 3 X 5 7/8 7800 550C782T400DN2B 16.9 27.6 9.9 3 X 7 5/8 3800 550C382T500FD2D 37.5 17.1 6.2 3 1/2 X 4 5/8 9000 550C902T400DG2D 14.4 30.6 11.0 3 X 8 5/8 4300 550C432T500FE2D 32.9 18.8 6.8 3 1/2 X 5 1/8 400 VDC (450 VDC SURGE) 500 VDC (550 VDC SURGE) 9700 550C972T400FN2D 12.6 34.9 12.6 3 1/2 X 7 5/8 4900 550C492T500FF2D 28.2 20.9 7.5 3 1/2 X 5 5/8 11000 550C113T400FG2D 10.7 38.7 13.9 3 1/2 X 8 5/8 5200 550C522T500FP2D 26.7 21.8 7.9 3 1/2 X 5 7/8 5400 550C542T500DN2B 30.3 20.9 7.5 3 X 7 5/8 700 550C701T450CH2B 125.3 6.3 2.3 2 1/2 X 2 5/8 6000 550C602T500DG2B 22.9 24.2 8.7 3 X 8 5/8 980 550C981T450CB2B 89.7 7.9 2.9 2 1/2 X 3 1/8 7000 550C702T500FN2D 19.7 27.9 10.1 3 1/2 X 7 5/8 1300 550C132T450CJ2B 66.5 9.7 3.5 2 1/2 X 3 5/8 8400 550C843T500FG2D 16.6 31.0 11.2 3 1/2 X 8 5/8 450 VDC (500 VDC SURGE) CDM Cornell Dubilier • 140 Technology Place • Liberty, SC 29657 • Phone: (864)843-2277 • Fax: (864)843-3800 Type 550C 105 °C High Ripple, Inverter Grade, Aluminum Ultra-Ripple, Long Life Screw Terminal Type Typical Performance Curves ESR vs Temperature and Frequency 5000 µF 200 V 100 –40 ºC Capacitance vs Temperature and Frequency 5000 µF 200 V 1.2 Ratio to 25 ºC, 120 Hz Value –20 ºC 10 0 ºC 1 25 ºC 65 ºC 0 ºC 25 ºC –20 ºC 0.6 0.4 –40 ºC 0 0.1 10 100 1000 10000 Frequency (Hz) 10 100000 Capacitance vs Temperature and Frequency 4700 µF 400 V 1.2 100 1000 Frequency (Hz) Ratio to 25 ºC, 120 Hz Value 65 ºC 0 ºC 0.6 0.4 –20 ºC 10000 100000 100 –20 ºC 10 0 ºC 1 25 ºC 65 ºC –40 ºC 0.2 100000 –40 ºC 25 ºC 0.8 10000 ESR vs Temperature and Frequency 4700 µF 400 V 1000 85 ºC 1 85 ºC 0.1 0 10 100 1000 10000 10 100000 100 1000 Frequency (Hz) Frequency (Hz) Type 550C Life Test, 1300 uF 400 Vdc 105 ⁰C Life Test, 3200 µF 450 Vdc, Type 550C 3200 48 Capacitance 42 36 2000 30 ESR 1600 24 1200 18 800 12 400 DC Leakage 0 0 2000 4000 6000 0.045 1200 0.04 Capacitance 1000 Capacitance (µF) 2400 0.05 1400 ESR (mΩ) 2800 0.035 0.03 800 0.025 ESR 600 0.02 0.015 400 6 200 0 0 8000 10000 12000 14000 16000 18000 20000 0.01 0.005 0 0 2.5 5 Life Test Time (hours) 7.5 10 12.5 15 17.5 20 1000's Hours @ 85⁰C & 400 Vdc 22.5 25 Type 550C Operating Life in Kilohours vs Ripple Current 1000 45 ºC 55 ºC Expected Operating Life, kh Capacitance (µF), DCL (µA) 65 ºC 0.2 85 ºC Ratio to 25 ºC, 120 Hz Value 0.8 85 ºC 65 ºC 75 ºC 100 85 ºC 95 ºC 105 ºC 10 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 1.1 1.2 1.3 1.4 1.5 Rated Ripple-Current Multiple CDM Cornell Dubilier • 140 Technology Place • Liberty, SC 29657 • Phone: (864)843-2277 • Fax: (864)843-3800 ESR (Ω) Ratio to 25 ºC, 120 Hz Value 1 Notice and Disclaimer: All product drawings, descriptions, specifications, statements, information and data (collectively, the “Information”) in this datasheet or other publication are subject to change. The customer is responsible for checking, confirming and verifying the extent to which the Information contained in this datasheet or other publication is applicable to an order at the time the order is placed. All Information given herein is believed to be accurate and reliable, but it is presented without any guarantee, warranty, representation or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on the knowledge that the Cornell Dubilier company providing such statements (“Cornell Dubilier”) has of operating conditions that such Cornell Dubilier company regards as typical for such applications, but are not intended to constitute any guarantee, warranty or representation regarding any such matter – and Cornell Dubilier specifically and expressly disclaims any guarantee, warranty or representation concerning the suitability for a specific customer application, use, storage, transportation, or operating environment. The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by Cornell Dubilier with reference to the use of any Cornell Dubilier products is given gratis (unless otherwise specified by Cornell Dubilier), and Cornell Dubilier assumes no obligation or liability for the advice given or results obtained. Although Cornell Dubilier strives to apply the most stringent quality and safety standards regarding the design and manufacturing of its products, in light of the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies or other appropriate protective measures) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. Although all product-related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicated in such warnings, cautions and notes, or that other safety measures may not be required.