Type 715P, Orange Drop®, Polypropylene Film/Foil Capacitors
Features
• Long history of proven reliability
• Low dissipation factor.
• Tolerances as close as ±1%.
• Excellent stability, virtually linear
temperature coefficient.
• Various lead spacings, crimp styles
and lead lengths available.
Specifications
400,000 M⍀ minimum at +25°C
20,000 M⍀ minimum at +85°C
2,000 M⍀ minimum at +105°C
Pulse Rise Time, dV/dt:
See tabulated data.
Capacitance Range:
.001 µF to 0.47 µF
Corona Start Voltage (typical):
See tabulated data.
Capacitance Tolerance:
±1% to ±10%
Encapsulation:
Conformal coating of flame retardant orange
epoxy (meets UL94V-0 specifications)
Voltage Ratings:
100 to 2000 Volts D-C
70 to 500 Volts A-C
Dielectric:
Polypropylene film.
Operating Temperature Range:
-55°C to +85°C
(+105°C with proper voltage derating)
Lead Wire:
Tinned copper-clad steel,
.032 (0.8) diameter, #20 AWG
Dissipation Factor:
Insulation Resistance:
See tabulated data.
Construction:
Non-inductively wound with extended
foil. Additional details on general
specifications page.
Applications:
Switching and high voltage power
supplies, inverters, snubbers, resonant
converters and electronic lighting ballasts.
Regulatory Information
Dimensions in inches, metric (mm) in parenthesis.
CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830
Type 715P, Orange Drop®, Polypropylene Film/Foil Capacitors
General Specifications
The 715P and 716P series are manufactured with polypropylene film and extended foil. Polypropylene has a very
low dissipation factor, low dielectric absorption and exhibits excellent capacitance stability. These characteristics
combined with the direct connection of the lead wire to the extended foil electrode makes the 715P and 716P
series ideal for high current, high pulse applications.
The 715P series has a round profile and is available in tolerances as close as ±1%. The 716P series has a pressed
profile and, in addition, is designed with copper leads, thus adding to it's performance in high frequency, high
pulse current applications.
Other specifications are listed below and on the following pages.
Operating Temperature Range:
Humidity Testing:
The standard operating temperature range for
polypropylene f ilm is -55°C to +85°C. T he
715P and 716P may be operated up to +105°C
provided the DC working voltage is reduced
by 50%.
Units subjected to 95% relative humidity for 72
hours with no voltage applied at +75°C. After 4
hours of drying minimum product of insulation
resistance and capacitance shall be 50,000 megohmmicrofarads.
For specific derating of the AC voltage when
operating above +85°C please contact our
design engineering department.
DC Voltage Life Test:
The maximum operating temperature for 715P
and 7 16P polypropylene film capacitors i s
+ 105°C.
Dielectric Withstanding Voltage:
Units rated below 800 VDC shall withstand
a DC potential of 250% of rated voltage applied
between terminals for not more than 5 seconds;
units rated 800 VDC a nd above shall withstand
200% of rated voltage.
Construction:
Units rated 1 00 through 600 VDC are single
section designs constructed of plain polypropylene
film with extended foil. U nits rated 8 00 VDC
and above are series-section designs with extended
foil and incorporate a floating common of
metallized polypropylene. A ll units are noninductively wound.
Temperature Coefficient:
The typical temperature coefficient is -180 ppm/°C
over the temperature range of -55°C to +85°C.
Minimum of 500 hours at +85°C at 150% of rated
voltage. After test, capacitance shall not have
changed by more than 3%, insulation resistance shall
not have decreased by more than 25% and dissipation
factor shall not have changed by more than 0.03%.
Measurements made at 1 KHz.
AC Voltage Life Test:
Minimum of 500 hours at +85°C at 60 Hz. AC test
voltage applied at 110% of AC rating. After test,
capacitance shall not have changed by more than 3%,
insulation resistance shall not have decreased by
more than 25%, and dissipation factor shall not have
changed by more than 0.03%. Measurements made
at 1 KHz.
Additional notes on Life Testing:
CDE performs standard 5 00 hour accelerated life tests,
both DC and line frequency AC, to monitor process
control over our wide range of products.
We also perform longer term life testing, typically 2000
hours, during development of most products. I n
addition we do accelerated l ife testing at 10-250 K Hz
for our High Performance AC products. For additional
life test information please contact us.
CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830
Type 715P, Orange Drop®, Polypropylene Film/Foil Capacitors
Ordering/Part Number Information
715P
222
5
6
J
D
3
(XXXX)
A suffix may be added b y
the factory to denote special
construction.
Lead Length 1 = 0.187 (4.7) ±0.030 (0.8)
2 = 0.250 (6.4) ±0.030 (0.8)
3 = 1.250 (32.0) Minimum
(Other lead lengths available)
Terminal A = Straight Lead (1.25 Min. lead length)
B,F = Hairpin Crimp
C = C aptive Crimp 1
D,G,H = Hockey Stick Crimp
Case Code See Standard S izes/Ratings Table
D-C Voltage Rating Expressed in Hundreds of Volts
Capacitance Tolerance 9 = ±10%; 5 = ±5%; 3 = ±3%; 2 = ±2%; 1 = ±1%
Capacitance Expressed in Picofarads. The first two digits are the significant figures,
the third is the number of zeros following, (i.e. 222 = 2200 pF = .0022 µF)
CDE Type Number
Identifies the basic capacitor design.
715P Round profile, 716P Pressed profile
Terminal C has a fixed lead length of 0.156 (4.0) ±0.020 (0.5), therefore it is not necessary to indicate the lead
length digit when ordering. Available for "L" case code parts only
1
Please note:
While it i s not p ossible t o list every capacitance value, tolerance, or design/size variation available,
our flexibility in design and manufacturing gives u s the ability to quickly, and cost effectively, provide
you with the capacitor you require. Please contact us today with your specific needs!
Dimensions in inches, metric (mm) in parenthesis.
CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830
Type 715P, Orange Drop®, Polypropylene Film/Foil Capacitors
Standard Lead Styles
TERMINAL A
TERMINAL B ,F
TERMINAL D,G,H
TERMINAL C
Standard Lead Spacings
CASE
CODE
N
J
K
L
M
S, inches (metric, mm in parentheses)
Term. A
Term. B
0.394 (10)
0.500 (12.7)
0.688 (17.5)
1.031 ( 26.2) 0.969 (24.6)
1 406 (35.7) 1.344 (34.1)
0.394 (10)
0.500 (12.7)
0.688 (17.5)
Term. D
Term. C *
---
-------
0.375 (9.5)
0.375 (9.5)
0.719 (18.3) 0.886 (22.5)
--1.094 (27.8)
Term. F
Term. G
Term. H
--0.295 (7.5)
0.197 (5)
0.394 (10)
0.295 (7.5)
0.197 (5)
0.590 (15)
0.295 (7.5)
0.394 (10)
--0.886 (22.5) 0.590 (15)
----1.083 (27.5)
* Terminal C is designed for printed circuit boards requiring a lead spacing of 0.886 (22.5) with board hole sizes of 0.044 (1.1)
to 0.048 (1.2) in diameter. Available for "L" case code parts only. Please consult us if you have a specific requirement.
Standard Marking Format
Sample Marking
on unit
CDE715P600V
222J 9810
Description
CDE
715P
600V
222J
9810
-
CDE Electronics identification
Type number
D-C Voltage rating, Volts
Capacitance and tolerance code
Weekly date code
(i.e. 10th week of 1998)
Tolerance codes
per EIA Standards
F
±1%
G
H
J
K
±2%
±3%
±5%
±10%
Dimensions in inches, metric (mm) in parenthesis.
CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830
Type 715P, Orange Drop®, Polypropylene Film/Foil Capacitors
Type 715P Standard Sizes/Ratings
Value, µF Part Number2 L MAX
DIA MAX
H MAX
1
Value, µF Part Number2 L MAX
DIA MAX
H
MAX
200 VDC /155 VAC*
100 VDC / 70 VAC*
.0056
.006
.0068
.0075
.0082
.009
.01
715P56291N
715P60291N
715P68291N
715P75291N
715P82291N
715P90291N
715P10391N
.57
.57
.57
.57
.57
.57
.57
(14.5)
(14.5)
(14.5)
(14.5)
(14.5)
(14.5)
(14.5)
.25
.25
.26
.26
.27
.26
.26
(6.4)
(6.4)
(6.6)
(6.6)
(6.9)
(6.6)
(6.6)
.31
.31
.32
.32
.33
.32
.32
(7.9)
(7.9)
(8.1)
(8.1)
(8.4)
(8.1)
(8.1)
.012
.015
.018
.022
.025
.027
.033
715P12391N
715P15391N
715P18391N
715P22391N
715P25391N
715P27391N
715P33391N
.57
.57
.57
.57
.57
.57
.57
(14.5)
(14.5)
(14.5)
(14.5)
(14.5)
(14.5)
(14.5)
.28
.29
.31
.33
.35
.35
.38
(7.1)
(7.4)
(7.9)
(8.4)
(8.9)
(8.9)
(9.7)
.34
.35
.37
.39
.41
.41
.44
(8.6)
(8.9)
(9.4)
(9.9)
(10.4)
(10.4)
(11.2)
.039
.047
.05
.056
.062
.068
715P39391J
715P47391J
715P50391J
715P56391J
715P62291J
715P68391J
.70
.70
.70
.70
.70
.70
(17.8)
(17.8)
(17.8)
(17.8)
(17.8)
(17.8)
.34
.36
.37
.38
.40
.41
(8.6)
(9.1)
(9.4)
(9.7)
(10.2)
(10.4)
.40
.42
.43
.44
.46
.47
(10.2)
(10.7)
(10.9)
(11.2)
(11.7)
(11.9)
.075
.082
.09
.1
.12
.15
.18
.2
.22
715P75391K
715P82391K
715P90391K
715P10491K
715P12491K
715P15491K
715P18491K
715P20491K
715P22491K
.90
.90
.90
.90
.90
.90
.90
.90
.90
(22.9)
(22.9)
(22.9)
(22.9)
(22.9)
(22.9)
(22.9)
(22.9)
(22.9)
.36
.37
.38
.40
.43
.46
.50
.52
.54
(9.1)
(9.4)
(9.7)
(10.2)
(10.9)
(11.7)
(12.7)
(13.2)
(13.7)
.42
.43
.44
.46
.49
.52
.56
.58
.60
(10.7)
(10.9)
(11.2)
(11.7)
(11.9)
(13.2)
(14.2)
(14.7)
(15.2)
.25
.27
.3
.33
715P25491L
715P27491L
715P30491L
715P33491L
1.25 (31.8)
1.25 (31.8)
1.25 (31.8)
1.25 (31.8)
.47
.48
.50
.52
(11.9)
(12.2)
(12.7)
13.2)
.53
.54
.56
.58
(13.5)
(13.7)
(14.2)
(14.7)
200 VDC /155 VAC*
.01
.012
.015
.018
.022
.027
.033
715P10392J
715P12392J
715P15392J
715P18392J
715P22392J
715P27392J
715P33392J
.70
.70
.70
.70
.70
.70
.70
(17.8)
(17.8)
(17.8)
(17.8)
(17.8)
(17.8)
(17.8)
.25
.26
.28
.29
.31
.33
.36
(6.4)
(6.6)
(7.1)
(7.4)
(7.9)
(8.4)
(9.1)
.31
.32
.34
.35
.37
.39
.42
(7.9)
(8.1)
(8.6)
(8.9)
(9.4)
(9.9)
(10.7)
.039
.047
.056
.068
715P39392K
715P47392K
715P56392K
715P68392K
.90
.90
.90
.90
(22.9)
(22.9)
(22.9)
(22.9)
.32
.34
.37
.39
(8.1)
(8.6)
(9.4)
(9.9)
.38
.40
.43
.45
(9.7)
(10.2)
(10.9)
(11.4)
.082
.1
.12
.15
.18
715P82392L
715P10492L
715P12492L
715P15492L
715P18492L
715P22492L
1.25
1.25
1.25
1.25
1.25
1.25
(31-8)
(31.8)
(31.8)
(31.8)
(31.8)
(31.8)
.36
.38
.41
.44
.47
.51
(9.1)
(9.7)
(10.4)
(11.2)
(11.9)
(13.0)
.42 (10.7)
.44 (11.2)
.47 (11.9)
.5 (12.7)
.53 (13.5)
.57 (14.5)
.27
.33
.39
715P27492M
715P33492M
715P39492M
715P47492M
1.65
1.65
1.65
1.65
(41.9) .49
(41.9) .53
(41.9) .56
(41.9) .60
(12.4)
(13.5)
(14.2)
(15.2)
.55
.59
.62
.66
(14.0)
(15.0)
(15.7)
(16.8)
.22
.47
400 VDC / 200 VAC*
.001
.0012
.0015
.0018
.0022
.0027
.0033
715P10294J
715P12294J
715P15294J
715P18294J
715P22294J
715P27294J
715P33294J
.70 (17.8)
.70 (17.8)
.70 (17.8)
.70 (17.8)
.70 (17.8)
.70 (17.8)
.70 (17.8)
.35
.36
.32
.34
.33
.35
.32
(8.9)
(9.1)
(8.1)
(8.6)
(8.4)
(8.9)
(8.1)
.39
.40
.36
.38
.37
.39
.36
(9.9)
.0039
.0047
.0056
.0068
.0082
.01
.012
.015
715P39294J
715P47294J
715P56294J
715P68294J
715P82294J
715P10394J
715P12394J
715P15394J
.70 (17.8)
.70 (17.8)
.70 (17.8)
.70 (17.8)
.70 (17.8)
.70 (17.8)
.70 (17.8)
.70 (17.8)
.34
.34
.36
.29
.30
.30
.32
.34
(8.6)
(8.6)
(9.1)
(7.4)
(7.6)
(7.6)
(8.1)
(8.6)
.38
.38
.40
.35
.36
.36
.38
.40
(9.7)
(9.7)
(10.2)
(8.9)
(9.1)
(9.1)
(9.7)
(10.2)
.018
.022
.027
.033
715P18394K
715P22394K
715P27394K
715P33394K
.90 (22.9)
.90 (22.9)
.90 (22.9)
.90 (22.9)
.31
.33
.36
.38
(7.9)
(8.4)
(9.1)
(9.7)
.37
.39
.42
.44
(9.4)
(9.9)
(10.7)
(11.2)
.039
.047
.056
.068
.082
.1
.12
.15
715P39394L
715P47394L
715P56394L
715P68394L
715P82394L
715P10494L
715P12494L
715P15494L
1.25 (31.8)
1.25 (31.8)
1.25 ( 31.8)
1.25 (31.8)
1.25 (31.8)
1.25 (31.8)
1.25 (31.8)
1.25 (31.8)
.35
.37
.39
.42
.45
.48
.52
.56
(8.9)
(9.4)
(9.9)
(10.7)
(11.4)
(12.2)
(13.2)
(14.2)
.41
.43
.45
.48
.51
.54
.58
.62
(10.4)
(10.9)
(11.4)
(12.2)
(13.0)
(13.7)
(14.7)
(15.7)
.18
.22
.27
.33
.39
715P18494M
715P22494M
715P27494M
715P33494M
715P39494M
715P47494M
1.65 (41.9)
1.65 (41.9)
1.65 (41.9)
1.65 (41.9)
1.65 (41.9)
1.65 (41.9)
.54
.58
.63
.70
.75
.82
(13.7)
(14.7)
(16.0)
(17.8)
(19.1)
(20.8)
.60
.64
.69
.76
.81
.88
(15.2)
(16.3)
(17.5)
(19.3)
(20.6)
(22.4)
.47
1
Shaded part numbers, when ordered as ±5% tolerance with D3 leads, are standard stock items available through the CDE Distribution Network. F or
complete part number add letter and number for terminal style and lead length in accordance with Ordering Information, (i.e. 715P10452LD3)
2
To complete part number for proper tolerance, terminal style and lead length please refer to Ordering/Part Number Information page.
(10.2)
(9.1)
(9.7)
(9.4)
(9.9)
(9.1)
* Please refer to performance curves for RMS Voltage vs. Frequency characteristics.
Dimensions in inches, metric (mm) in parenthesis.
CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830
Type 715P, Orange Drop®, Polypropylene Film/Foil Capacitors
Type 715P Standard Sizes/Ratings 1
Value, µF Part Number 2 L MAX
DIA MAX
H MAX
Value, µF Part Number
DIA
MAX
H MAX
1000 VDC / 4 50 VAC*
600 VDC / 2 00 VAC*
1
L MAX
.001
.0012
.0015
.0018
.0022
.0027
.0033
.0039
.0047
.0056
.0068
715P10296J
715P12296J
715P15296J
715P18296J
715P22296J
715P27296J
715P33296J
715P39296J
715P47296J
715P56296J
715P68296J
.70
.70
.70
.70
.70
.70
.70
.70
.70
.70
.70
(17.8)
(17.8)
(17.8)
(17.8)
(17.8)
(17.8)
(17.8)
(17.8)
(17.8)
(17.8)
(17.8)
.35
.36
.32
.34
.33
.35
.32
.34
.34
.36
.38
(8.9)
(9.1)
(8.1)
(8.6)
(8.4)
(8.9)
(8.1)
(8.6)
(8.6)
(9.1)
(9.7)
.39
.40
.36
.38
.37
.39
.36
.38
.38
.40
.42
(9.9)
(10.2)
(9.1)
(9.7)
(9.4)
(9.9)
(9.1)
(9.7)
(9.7)
(10.2)
(10.7)
.0056
.0068
.0082
.01
.012
715P562910L
715P682910L
715P822910L
715P103910L
715P123910L
1.25
1.25
1.25
1.25
1.25
(31.8)
(31.8)
(31.8)
(31.8)
(31.8)
.28
.29
.31
.33
.35
(7.1)
(7.4)
(7.9)
(8.4)
(8.9)
.34
.35
.37
.39
.41
(8.6)
(8.9)
(9.4)
(3.9)
(10.4)
.015
.018
.022
.027
.033
715P153910L
715P183910L
715P223910L
715P273910L
715P333910L
1.25
1.25
1.25
1.25
1.25
(31.8)
(31.8)
(31.8)
(31.8)
(31.8)
.38
.41
.44
.47
.51
(9.7)
(10.4)
(11.2)
(11.9)
(13.0)
.44
.47
.50
.53
.57
(11.2)
(11.9)
(12.7)
(13.5)
(14.5)
.0082
.01
.012
.015
.018
.022
715P82296K
715P10396K
715P12396K
715P15396K
715P18396K
715P22396K
.90 (22.9)
.34
.36
.38
.42
.44
.48
(8.6)
(9.1)
(9.7)
(10.7)
(11.2)
(12.2)
.38
.40
.42
.46
.48
.52
(9.7)
(10.2)
(10.7)
(11.7)
(12.2)
(13.2)
.039
.047
.056
.068
.082
.1
715P393910M
715P473910M
715P563910M
715P683910M
715P823910M
715P104910M
1.65
1.65
1.65
1.65
1.65
1.65
(41.9)
(41.9)
(41.9)
(41.9)
(41.9)
(41.9)
.47
.50
.53
.58
.62
.67
(11.9)
(12.7)
(13.5)
(14.7)
(15.7)
(17.0)
.53
.56
.59
.64
.68
.73
(13.5)
14.2)
(15.0)
(16.3)
(17.3)
(18.5)
.027
.033
.039
.047
.056
.068
.082
.1
715P27396L
715P33396L
715P39396L
715P47396L
715P56396L
715P68396L
715P82396L
715P10496L
1.25
1.25
1.25
1.25
1.25
1.25
1.25
1.25
(31.8)
(31.8)
(31.8)
(31.8)
(31.8)
(31.8)
(31.8)
(31.8)
.43
.46
.49
.52
.56
.60
.65
.71
(10.2)
(11.7)
(12.4)
(13.2)
(14.2)
(15.2)
(16.5)
(18.0)
.50
.53
.56
.60
.64
.69
.75
(12.7)
(13.5)
(14.2)
(15.2)
(16.3)
(17.5)
(19.2)
.12
.15
.18
.22
715P12496M
715P15496M
715P18496M
715P22496M
1.65
1.65
1.65
1.65
(41.9)
(41.9)
(41.9)
(41.9)
.65
.71
.77
.83
(16.5)
(18.0)
(19.6)
(21.1)
.69
.75
.81
.85
(17.5)
(19.1)
(20.6)
(21.6)
.0056
.0068
.0082
.01
.012
715P56298L
715P68298L
715P82298L
715P10398L
715P12398L
1.25
1.25
1.25
1.25
1.25
(31.8)
(31.8)
(31.8)
(31.8)
(31.8)
.28
.29
.31
.33
.35
(71)
(7.4)
(7.9)
(8.4)
(8.9)
.34
.35
.37
.39
.41
(8.6)
(8.9)
(9.4)
(9.9)
(10.4)
.015
.018
.022
.027
.033
715P15398L
715P18398L
715P22398L
715P27398L
715P33398L
1.25
1.25
1.25
1.25
1.25
(31.8)
(31.8)
(31.8)
(31.8)
(31.8)
.38
.41
.44
.47
.51
(9.7)
(10.4)
(11.2)
(11.9)
(13.0)
.44 (11.2)
.47 (11.9)
.50 (12.7)
.53 (13.5)
.57 (14.5)
.039
.047
.056
.068
.082
.1
715P39398M
715P47398M
715P56398M
715P68398M
715P82398M
715P10498M
1.65
1.65
1.65
1.65
1.65
1.65
(41.9)
(41.9)
(41.9)
(41.9)
(41.9)
(41.9)
.47
.50
.53
.58
.62
.67
(11.9)
(12.7)
(13.5)
(14.7)
(15.7)
(17.0)
.53
.56
.59
.64
.68
.73
.90
.90
.90
.90
.90
(22.9)
(22.9)
(22.9)
(22.9)
(22.9)
1200 VDC / 4 75 VAC*
.47 (11.9)
800 VDC / 450 VAC*
.001
.0012
.0015
.0018
.0022
715P102912L
715P122912L
715P152912L
715P182912L
715P222912L
1.25
1.25
1.25
1.25
1.25
(31.8)
(31.8)
(31.8)
(31.8)
(31.8)
.29
.30
.32
.34
.35
(7.4)
(7.6)
(8.1)
(8.6)
(8.9)
.33
.34
.36
.38
.39
(8.4)
(8.6)
(9.1)
(9.7)
(9.9)
.0027
.0033
.0039
.0047
.0056
715P272912L
715P332912L
715P392912L
715P472912L
715P562912L
1.25
1.25
1.25
1.25
1.25
(31.8)
(31.8)
(31.8)
(31.8)
(31.8)
.38
.32
.34
.36
.38
(9.7)
(8.1)
(8.6)
(9.1)
(9.7)
.42
.38
.40
.42
.44
(10.7)
(9.7)
(10.2)
(10.7)
(11.2)
.0068
.0082
.01
.012
.015
715P682912L
715P822912L
715P103912L
715P123912L
715P153912L
1.25
1.25
1.25
1.25
1.25
(31.8)
(31.8)
(31.8)
(31.8)
(31.8)
.41
.44
.47
.51
.55
(10.4)
(11.2)
(11.9)
(13.0)
(14.0)
.47
.50
.53
.57
.61
(11.9)
(12.7)
(13.5)
(14.5)
(15.5)
.018
.022
.027
.033
.039
.047
715P183912M
715P223912M
715P273912M
715P333912M
715P393912M
715P473912M
1.65
1.65
1.65
1.65
1.65
1.65
(41.9)
(41.9)
(41.9)
(41.9)
(41.9)
(41.9)
.50
.54
.59
.64
.68
.74
(12.7)
(13.7)
(15.0)
(16.3)
(17.3)
(18.8)
.56
.60
.65
.70
.74
.80
(14.2)
(15.2)
(16.5)
(17.8)
(18.8)
(20.3)
(13.5)
(14.2)
(15.0)
(16.3)
(17.3)
(18.5)
Shaded part numbers, when ordered as ±5% tolerance with D3 leads, are standard stock Items available through the CDE Distribution Network. For
complete part number add letter and number for terminal style and lead length in accordance with Ordering Information, (i.e. 715P10452LD3)
2
To complete part number for proper tolerance, terminal style and lead length please refer to Ordering/Part Number Information page.
* Please refer to performance curves for RMS Voltage vs. Frequency characteristics.
Dimensions in inches, metric (mm) in parenthesis.
CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830
Type 715P, Orange Drop®, Polypropylene Film/Foil Capacitors
Value, µF Part Number
2
Type 715P Standard Sizes/Ratings1
L MAX
DIA MAX
H MAX
L MAX
2
Value, µF Part Number
DIA
MAX
H MAX
2000 VDC / 500 VAC*
1600 VDC / 5 00 VAC*
(8.4)
(8.6)
(9.1)
(9.7)
.001
.0012
.0015
.0018
715P102916L
715P122916L
715P152916L
715P182916L
1.25
1.25
1.25
1.25
(31.8)
(31.8)
(31.8)
(31.8)
.29
.30
.32
.34
(7.4)
(7.6)
(8.1)
(8.6)
.0022
.0027
.0033
.0039
715P222916L
715P272916L
715P332916L
715P392916L
1.25
1.25
1.25
1.25
(31.8)
(31.8)
(31.8)
(31.8)
.35
.38
.40
.43
.39 (9.9)
(8.9)
.42 (10.7)
(9.7)
(10.2) .44 (11.2)
(10.9) .47 (11.9)
.0047
.0056
.0068
.0082
.01
715P472916L
715P562916L
715P682916L
715P822916L
715P103916L
1.25
1.25
1.25
1.25
1.25
(31.8)
(31.8)
(31.8)
(31.8)
(31.8)
.46
.49
.52
.56
.61
(11.7)
(12.4)
(13.2)
(14.2)
(15.5)
.012
.015
.018
715P123916M
715P153916M
715P183916M
1.65 (41.9)
1.65 (41.9)
1.65 (41.9)
.54 (13.7)
.59 (15.0)
.63 (16.0)
.58 (14.7)
.63 (16.0)
.67 (17.0)
.022
.027
.033
715P223916M
715P273916M
715P333916M
1.65 (41.9)
1.65 (41.9)
1.65 (41.9)
.69 (17.5)
.74 (18.8)
.81 (20.6)
.73 (18.5)
.78 (19.8)
.85 (21.6)
.33
.34
.36
.38
.50
.53
.56
.60
.65
(12.7)
(13.5)
(14.2)
(15.2)
(16.5)
.001
.0012
.0015
.0018
.0022
.0027
715P102920L
715P122920L
715P152920L
715P182920L
715P222920L
715P272920L
1.25
1.25
1.25
1.25
1.25
1.25
(31.8)
(31.8)
(31.8)
(31.8)
(31.8)
(31.8)
.29
.30
.32
.34
.35
.38
(7.4)
(7.6)
(8.1)
(8.6)
(8.9)
(9.7)
.33
.34
.36
.38
.39
.42
(8.4)
(8.6)
(9.1)
(9.7)
(9.9)
(10.7)
.0033
.0039
.0047
.0056
.0068
.0082
.01
715P332920L
715P392920L
715P472920L
715P562920L
715P682920L
715P822920L
715P103920L
1.25
1.25
1.25
1.25
1.25
1.25
1.25
(31.8)
(31.8)
(31.8)
(31.8)
(31.8)
(31.8)
(31.8)
.40
.43
.46
.49
.52
.56
.61
(10.2)
(10.9)
(11.7)
(12.4)
(13.2)
(14.2)
(15.5)
.44
.47
.50
.53
.56
.60
.65
(11.2)
(11.9)
(12.7)
(13.5)
(14.2)
(15.2)
(16.5)
.012
.015
.018
.022
.027
.033
715P123920M
715P153920M
715P183920M
715P223920M
715P273920M
715P333920M
1.65
1.65
1.65
1.65
1.65
1.65
(41.9)
(41.9)
(41.9)
(41.9)
(41.9)
(41.9)
.54
.59
.63
.69
.74
.81
(13.7)
(15.0)
(16.0)
(17.5)
(18.8)
(20.6)
.58
.63
.67
.73
.78
.85
(14.7)
(16.0)
(17.0)
(18.5)
(19.8)
(21.6)
1
Shaded part numbers, when ordered as ±5% tolerance with D3 leads, are standard stock items available through the CDE Distribution Network. F or
complete part number add letter and number for terminal style and lead length in accordance with Ordering Information, (i.e. 715P10452LD3)
2
To complete part number for proper tolerance, terminal style and lead length please refer to Ordering/Part Number Information page.
* Please refer to performance curves for RMS Voltage vs. Frequency characteristics.
Please note:
It is not possible to list every capacitance value available for each rating, if you require a specific
cap value not listed just give us a call. We will supply the details you need.
Dimensions in inches, metric (mm) in parenthesis.
CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830
Type 715P, Orange Drop®, Polypropylene Film/Foil Capacitors
Corona, Dissipation Factor Specifications
Corona Start Voltage
Typical Corona
Start Voltage, RMS
250
300
325
600
625
650
D-C Rating
100
200
400, 600
800, 1000
1200
1600, 2000
Maximum Dissipation Factor (D.F.) in %
100V-600V
800V/1000V
1200V
1600V/2000V
Cap
Range (µF) 20KHz 100KHz 20KHz 100KHz 20KHz 100KHz 20KHz 100KHz
.001 - .01
.012 - .022
.027 - .047
.056 - .068
.082 - .1
.12 - .15
.18 - .22
.27 - .33
.39 - 47
.029
.031
.034
.037
.042
.049
.059
.074
.093
.040
.050
.071
.089
.116
.158
.217
.309
.427
.039
.040
.055
.058
.063
-----
.088
.098
.175
.193
.220
----
.035
.043
.047
------
.068
.111
.132
------
.033
.039
.041
------
.059
--
--
--
--
--
.093
.102
------
CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830
Type 715P, Orange Drop®, Polypropylene Film/Foil Capacitors
dV/dt Specifications
Cap
Maximum Pulse Rise Time (dV/dt) in Volts/µsec
Value (µF)
100V
200V
400V
600V
.001
.0012
.0015
.0018
.0022
.0027
.0033
.0039
.0047
.0056
.0068
.0082
.01
.012
.015
.018
.022
.027
.033
.039
.047
.056
.068
.082
.1
.12
.15
.18
.22
.27
.33
.39
.47
-
-
19900
18200
16200
14800
13400
12100
11000
10100
9200
8400
7600
6900
6300
5700
5100
4400
4000
3600
3200
2800
2500
2300
2100
1900
1700
1600
1400
1200
1100
970
880
810
740
19900
18200
16200
14800
13400
12100
11000
10100
9200
8400
7600
6500
5900
5400
4800
4400
4000
3300
3000
2800
2500
2300
2100
1900
1700
1500
1300
1200
1100
-
-
-
-
-
4900
4500
4100
3700
3400
3000
2800
2500
2200
2000
1900
1700
1500
1300
1200
1100
900
800
800
700
600
500
-
4400
4100
3600
3300
3000
2700
2400
2100
1900
1800
1600
1400
1200
1100
1000
910
820
690
620
570
520
800V/
1000V
16400
14900
13600
12300
11200
10000
9200
8300
7500
6800
6200
5300
4800
4400
4000
3600
-
1200V
43200
39500
35300
32200
29100
25000
22600
20800
18900
17400
15700
14300
13000
11900
10600
9000
8100
7300
6600
6100
5600
-
1600V/
2000V
43200
39500
35300
32200
29100
26300
23800
21900
19900
18300
16600
15100
13700
11600
10300
9400
8500
7700
7000
-
Note: dV/dt ratings based on measurements made at junction of the wire leads and capacitor body.
CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830
Type 715P, Orange Drop®, Polypropylene Film/Foil Capacitors
RMS Voltage vs. Frequency @ +85°C
Voltage (RMS)
Type 715P, 100 VDC
Frequency (KHz)
Voltage (RMS)
Type 715P, 200 VDC
Frequency (KHz)
CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830
Type 715P, Orange Drop®, Polypropylene Film/Foil Capacitors
RMS Voltage vs. Frequency @ +85°C
Voltage (RMS)
Type 715P, 400 VDC
Frequency (KHz)
Voltage (RMS)
Type 715P, 600 VDC
Frequency (KHz)
CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830
Type 715P, Orange Drop®, Polypropylene Film/Foil Capacitors
RMS Voltage vs. Frequency @ +85°C
Voltage (RMS)
Type 715P, 800/1000 VDC
Frequency (KHz)
Voltage (RMS)
Type 715P, 1200 VDC
Frequency (KHz)
CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830
Type 715P, Orange Drop®, Polypropylene Film/Foil Capacitors
RMS Voltage vs. Frequency @ +85°C
Voltage (RMS)
Type 715P, 1600/2000 VDC
Frequency (KHz)
CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830
Type 715P, Orange Drop®, Polypropylene Film/Foil Capacitors
|Z| (ohms)
|Z| (ohms)
Typical Impedance vs. Frequency
Frequency (MHz)
|Z| (ohms)
|Z| (ohms)
Frequency (MHz)
Frequency (MHz)
|Z| (ohms)
|Z| (ohms)
Frequency (MHz)
Frequency (MHz)
Frequency (MHz)
Please note: Capacitance values above are in µF The resonant frequency and impedance shown above apply to units with a 0.250"
lead length and are typical values only. Please contact us for data on the 100VDC rated units.
CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830
AC
Notice and Disclaimer: All product drawings, descriptions, specifications, statements, information and
data (collectively, the “Information”) in this datasheet or other publication are subject to change. The
customer is responsible for checking, confirming and verifying the extent to which the Information contained in this datasheet or other publication is applicable to an order at the time the order is placed. All
Information given herein is believed to be accurate and reliable, but it is presented without any guarantee, warranty, representation or responsibility of any kind, expressed or implied. Statements of suitability
for certain applications are based on the knowledge that the Cornell Dubilier company providing such
statements (“Cornell Dubilier”) has of operating conditions that such Cornell Dubilier company regards
as typical for such applications, but are not intended to constitute any guarantee, warranty or representation regarding any such matter – and Cornell Dubilier specifically and expressly disclaims any guarantee,
warranty or representation concerning the suitability for a specific customer application, use, storage,
transportation, or operating environment. The Information is intended for use only by customers who
have the requisite experience and capability to determine the correct products for their application. Any
technical advice inferred from this Information or otherwise provided by Cornell Dubilier with reference
to the use of any Cornell Dubilier products is given gratis (unless otherwise specified by Cornell Dubilier),
and Cornell Dubilier assumes no obligation or liability for the advice given or results obtained. Although
Cornell Dubilier strives to apply the most stringent quality and safety standards regarding the design
and manufacturing of its products, in light of the current state of the art, isolated component failures may
still occur. Accordingly, customer applications which require a high degree of reliability or safety should
employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies
or other appropriate protective measures) in order to ensure that the failure of an electrical component
does not result in a risk of personal injury or property damage. Although all product-related warnings,
cautions and notes must be observed, the customer should not assume that all safety measures are indicated in such warnings, cautions and notes, or that other safety measures may not be required.
4