AVGA224M50B12T-F

Type AVGA –40 °C to +105 °C High Capacitance SMT Aluminum Electrolytic Capacitors For Filtering, Bypassing and Power Supply Decoupling with High Capacitance Requirements Type AVGA Capacitors are rated for 2000 hours at 105 ºC and up to 63 Vdc. They are ideal for high density PC board packaging. The Type AVGA offers a low in-place-cost for a high quality performer. The vertical cylindrical cases facilitate automatic mounting and reflow soldering into the same footprint of like-rated tantalum capacitors except without the need for voltage derating. Type AVGA is RoHS compliant. Highlights • +105 °C, Up to 2000 Hours Load Life • Capacitance Range: 0.1 µF to 4700 µF • Voltage Range: 6.3 Vdc to 63 Vdc –40 °C to +105 °C 6.3, 10, 16, 25, 35, 50, 63 Vdc 0.1µF to 4700 µF ±20% @ 120 Hz and +20 °C 6.3 – 63 V 4 – 10 Ø 12.5 ~ 16 Ø I = 0.01 CV or 3 µA, whichever is greater, after 2 minutes at +20 ºC I = 0.03 CV or 4 µA, whichever is greater, after 2 minutes at +20 ºC C = rated capacitance in µF V = rated DC Working voltage in V Specifications Operating Temperature: Rated Voltage: Capacitance: Capacitance Tolerance: Leakage Current (at 20 ºC): I = leakage current Dissipation Factor: (Tan δ at 120 Hz, 20 ºC) Rated Voltage 4 ~ 10 Ø 12.5 ~ 16 Ø 6.3 0.45 0.4 10 0.35 0.38 16 0.28 0.34 25 0.18 0.26 35 0.16 0.22 50 0.14 0.18 63 0.12 0.14 When the capacitance exceeds 1000 µF, .02 shall be added for every 1000 µF increase Low Temperature Characteristic (at 120 Hz): Rated Voltage Z(–25 ºC) 4 ~ 10 Ø 6.3 4 10 3 4 8 16 2 3 6 25 2 2 4 35 2 2 3 50 2 2 3 63 2 2 3 Impedance /Z(+20 ºC) 12.5 ~ 16 Ø 5 Ratio Z(–40 ºC) 4 ~ 10 Ø 12 /Z(+20 ºC) 12.5 ~ 16 Ø 10 8 6 4 3 3 3 Impedance ratio shall not exceed the values given in the table above. Load Life Test: Test Time Capacitance Change Dissipation Factor Leakage Current 8 ~ 16 Ø 2,000 Hours 4 ~ 6.3 Ø : Within ±25 % of initial value : Within ±20 % of initial value Within specified value < 200% of specified value * The above specifications shall be satisfied when the capacitors are restored to 20 ºC after the rated voltage is applied for 2,000 hrs at 105 ºC Shelf LifeTest: Test time: 1000 hours; other items are the same as those for life test. Complies with the EU Directive 2002/95/EC requirement restricting the use of Lead (Pb), Mercury (Hg), Cadmium (Cd), Hexavalent chromium (Cr(VI)), PolyBrominated Biphenyls (PBB) and PolyBrominated Diphenyl Ethers (PBDE). CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8564 • Fax: (508)996-3830 • www.cde.com Type AVGA –40 °C to +105 °C High Capacitance SMT Aluminum Electrolytic Capacitors Outline Drawings, Case Code & Dimensions Table Fig. 1 ØD ± 0.5 B ± 0.2 0.4 ±0.2 Case Ø D Code (mm) B 4.0 5.0 6.3 6.3 8.0 10.0 C D X F G Q H L P L (mm) 5.7 ±0.3 5.7 ±0.3 5.7 ±0.3 7.7 ±0.3 10 ±0.5 10 ±0.5 A 4.3 5.3 6.6 6.6 8.4 B 4.3 5.3 6.6 6.6 8.4 C W (mm) P ±0.2 Fig. (mm) No. 1.0 1.5 2.0 2.0 3.1 4.7 4.7 4.2 4.2 6.0 1 1 1 1 1 1 1 2 2 2 A ± 0.2 (mm) (mm) (mm) 2.0 0.5 to 0.8 2.3 0.5 to 0.8 2.7 0.5 to 0.8 2.7 0.5 to 0.8 3.0 0.7 to 1.1 3.3 0.7 to 1.1 3.3 0.7 to 1.1 4.9 1.1 to 1.4 4.9 1.1 to 1.4 5.8 1.1 to 1.4 L W 0. 3 Max C ±0.2 P C ±0.2 Fig. 2 ØD ± 0.5 B ± 0.2 10.4 10.4 10.0 10.3 ±0.5 10.4 10.4 12.5 13.5 ±0.5 12.8 12.8 12.5 16 ±0.5 12.8 12.8 16.0 16.5 ±0.5 16.3 16.3 1.0 Max. A ± 0.2 L W 0 .4 Max. C ±0.2 P C ±0.2 Part Numbering System AVGA Type AVGA 227 Capacitance 104 = .1 µF 475 = 4.7 µF 106 = 10.0 µF 227 = 220 µF 478 = 4700 µF M Capacitance Tolerance M = ±20% 06 = 6.3 Vdc 10 = 10 Vdc 16 = 16 Vdc 25 = 25 Vdc 35 = 35 Vdc 50 = 50 Vdc 63 = 63 Vdc 25 Voltage Code F Case Code See Table 24 = Carrier tap Width (mm) T = Tape & Reel Y = Tray Pack (available for H,L, & P case codes) 24T Packaging Code –F RoHs Compliant CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8564 • Fax: (508)996-3830 • www.cde.com Type AVGA –40 °C to +105 °C High Capacitance SMT Aluminum Electrolytic Capacitors Ratings Cap (µF) 47 100 220 330 470 1000 2200 3300 4700 33 47 100 220 330 470 470 1000 2200 3300 4700 10 22 33 47 100 220 330 470 1000 2200 3300 4.7 10 22 33 47 100 220 330 470 1000 2200 AVGA476M06C12T-F AVGA107M06D16T-F AVGA227M06X16T-F AVGA337M06F24T-F AVGA477M06F24T-F AVGA108M06G24T-F AVGA228M06H32T-F AVGA338M06L32T-F AVGA478M06P44T-F AVGA336M10C12T-F AVGA476M10D16T-F AVGA107M10D16T-F AVGA227M10X16T-F AVGA337M10F24T-F AVGA477M10F24T-F AVGA477M10G24T-F AVGA108M10Q24T-F AVGA228M10L32T-F AVGA338M10P44T-F AVGA478M10P44T-F AVGA106M16B12T-F AVGA226M16C12T-F AVGA336M16D16T-F AVGA476M16D16T-F AVGA107M16D16T-F AVGA227M16X16T-F AVGA337M16F24T-F AVGA477M16F24T-F AVGA108M16H32T-F AVGA228M16P44T-F AVGA338M16P44T-F AVGA475M25B12T-F AVGA106M25C12T-F AVGA226M25D16T-F AVGA336M25D16T-F AVGA476M25D16T-F AVGA107M25X16T-F AVGA227M25F24T-F AVGA337M25G24T-F AVGA477M25G24T-F AVGA108M25L32T-F AVGA228M25P44T-F Max. Catalog Part Number Max. DCL (µA) 3.0 6.3 14 21 30 63 416 624 888 3.3 4.7 10 22 33 47 47 100 660 990 1410 3.0 3.5 5.3 7.5 16 35 53 75 480 1056 1584 3.0 3.0 5.5 8.3 12 25 55 83 118 750 1650 0.45 0.45 0.45 0.45 0.45 0.45 0.42 0.44 0.46 0.35 0.35 0.35 0.35 0.35 0.35 0.35 0.35 0.40 0.42 0.44 0.28 0.28 0.28 0.28 0.28 0.28 0.28 0.28 0.34 0.36 0.38 0.18 0.18 0.18 0.18 0.18 0.18 0.18 0.18 0.18 0.26 0.28 Max. DF @ 120 Hz Max. ESR @ 120 Hz/20 ºC (ohms) 6.3 Vdc (8 Vdc Surge) 15.87 7.46 3.39 2.26 1.59 0.75 0.32 0.22 0.16 10 Vdc (13 Vdc Surge) 17.58 12.35 5.80 2.64 1.76 1.23 1.23 0.58 0.30 0.21 0.16 16 Vdc (20 Vdc Surge) 46.42 21.10 14.07 9.88 4.64 2.11 1.41 0.99 0.56 0.27 0.19 25 Vdc (32 Vdc Surge) 63.49 29.84 13.56 9.04 6.35 2.98 1.36 0.90 0.64 0.43 0.21 13 23 38 50 60 100 320 375 410 550 820 B C D D D X F G G L P 4x5.7 5x5.7 6.3x5.7 6.3x5.7 6.3x5.7 6.3x7.7 8x10 10x10 10x10 12.5x16 16x16.5 2000 1000 1000 1000 1000 1000 500 500 500 150 125 17 30 45 48 69 120 290 320 550 950 950 B C D D D X F F H P P 4x5.7 5x5.7 6.3x5.7 6.3x5.7 6.3x5.7 6.3x7.7 8x10 8x10 12.5x13.5 16x16.5 16x16.5 2000 1000 1000 1000 1000 1000 500 500 200 125 125 30 48 69 120 290 320 410 410 750 1000 1000 C D D X F F G Q L P P 5x5.7 6.3x5.7 6.3x5.7 6.3x7.7 8x10 8x10 10x10 10x10.3 12.5x16 16x16.5 16x16.5 1000 1000 1000 1000 500 500 500 500 150 125 125 30 69 120 290 320 410 680 850 1000 C D X F F G H L P 5x5.7 6.3x5.7 6.3x7.7 8x10 8x10 10x10 12.5x13.5 12.5x16 16x16.5 1000 1000 1000 500 500 500 200 150 125 Ripple Current @ 120 Hz/105 ºC (ma) Case Code Size DxL (mm) Quantity Per Reel (ea) Contact factory for tray pack (Y) quantities CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8564 • Fax: (508)996-3830 • www.cde.com Type AVGA –40 °C to +105 °C High Capacitance SMT Aluminum Electrolytic Capacitors Max. Catalog Cap (µF) 4.7 10 22 33 47 100 220 330 470 1000 0.1 0.22 0.33 0.47 1.0 2.2 3.3 4.7 10 22 33 47 100 100 220 330 470 0.47 1 2.2 3.3 4.7 10 22 33 47 47 100 220 330 470 AVGA475M35B12T-F AVGA106M35C12T-F AVGA226M35D16T-F AVGA336M35D16T-F AVGA476M35X16T-F AVGA107M35F24T-F AVGA227M35G24T-F AVGA337M35Q24T-F AVGA477M35H32T-F AVGA108M35P44T-F AVGA104M50B12T-F AVGA224M50B12T-F AVGA334M50B12T-F AVGA474M50B12T-F AVGA105M50B12T-F AVGA225M50B12T-F AVGA335M50B12T-F AVGA475M50C12T-F AVGA106M50D16T-F AVGA226M50D16T-F AVGA336M50X16T-F AVGA476M50X16T-F AVGA107M50F24T-F AVGA107M50G24T-F AVGA227M50Q24T-F AVGA337M50H32T-F AVGA477M50L32T-F AVGA474M63B12T-F AVGA105M63B12T-F AVGA225M63B12T-F AVGA335M63C12T-F AVGA475M63D16T-F AVGA106M63D16T-F AVGA226M63X16T-F AVGA336M63F24T-F AVGA476M63F24T-F AVGA476M63G24T-F AVGA107M63Q24T-F AVGA227M63H32T-F AVGA337M63P44T-F AVGA477M63P44T-F Part Number Max. DCL (µA) 3.0 3.5 7.7 12 16 35 77 116 494 1050 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 5.0 11 17 24 50 50 110 165 235 3.0 3.0 3.0 3.0 3.0 6.3 14 21 30 30 63 416 624 888 0.16 0.16 0.16 0.16 0.16 0.16 0.16 0.16 0.22 0.22 0.14 0.14 0.14 0.14 0.14 0.14 0.14 0.14 0.14 0.14 0.14 0.14 0.14 0.14 0.14 0.18 0.18 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.14 0.14 0.14 Max. DF @ 120 Hz Max. ESR @ 120 Hz/20 ºC (ohms) 35 Vdc (44 Vdc Surge) 56.44 26.53 12.06 8.04 5.64 2.65 1.21 0.80 0.78 0.36 50 Vdc (63 Vdc Surge) 2320.96 1054.98 703.32 493.82 232.10 105.50 70.33 49.38 23.21 10.55 7.03 4.94 2.32 2.32 1.06 0.90 0.64 63 Vdc (79 Vdc Surge) 423.27 198.94 90.43 60.28 42.33 19.89 9.04 6.03 4.23 4.23 1.99 1.06 0.70 0.49 Ripple Current @ 120 Hz/105 ºC (ma) 16 27 44 54 80 320 375 410 520 750 2 3 4 5 10 16 18 20 32 47 65 80 230 375 375 500 550 5 8 12 17 22 32 58 140 170 310 310 470 700 700 B C D D X F G Q H P B B B B B B B C D D X X F G Q H L B B B C D D X F F G Q H P P Case Code Size DxL (mm) 4x5.7 5x5.7 6.3x5.7 6.3x5.7 6.3x7.7 8x10 10x10 10x10.3 12.5x13.5 16x16.5 4x5.7 4x5.7 4x5.7 4x5.7 4x5.7 4x5.7 4x5.7 5x5.7 6.3x5.7 6.3x5.7 6.3x7.7 6.3x7.7 8x10 10x10 10x10.3 12.5x13.5 12.5x16 4x5.7 4x5.7 4x5.7 5x5.7 6.3x5.7 6.3x5.7 6.3x7.7 8x10 8x10 10x10 10x10.3 12.5x13.5 16x16.5 16x16.5 Quantity Per Reel (ea) 2000 1000 1000 1000 1000 500 500 500 200 125 2000 2000 2000 2000 2000 2000 2000 1000 1000 1000 1000 1000 500 500 500 200 150 2000 2000 2000 1000 1000 1000 1000 500 500 500 500 200 125 125 Contact factory for tray pack (Y) quantities CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8564 • Fax: (508)996-3830 • www.cde.com Type AVGA –40 °C to +105 °C High Capacitance SMT Aluminum Electrolytic Capacitors Recommended Land Patterns by case size for AVGA series B C A B Case Code B C D X F G Q H L P Case Size 4x5.7 5x5.7 6.3x5.7 6.3x7.7 8x10 10x10 10x10.3 12.5x13.5 12.5x16 16x16.5 Land Dimensions (mm) C B A 1.6 2.6 1 1.6 3 1.4 1.6 3.5 1.9 1.6 3.5 1.9 2.5 3.5 3 2.5 4 4 2.5 4 4 4 7.5 7 4 7.5 7 6 8.5 9.5 CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8564 • Fax: (508)996-3830 • www.cde.com Type AVGA –40 °C to +105 °C High Capacitance SMT Aluminum Electrolytic Capacitors Recommended Soldering Methods Recommended Reflow Soldering Profile: For case diameters 4 thru 6.3 mm with voltage ratings of 6.3 to 50Vdc For case diameters 4 thru 6.3 mm with a voltage rating of 63 Vdc For case diameters 8 to 16 mm Case sizes 4 thru 6.3 mm dia. (4 to 50V) should be subjected to just one reflow soldering process. The 8 thru 16 mm dia. case sizes(and 4 thru 6.3 mm dia. at 63V) should be subjected to a maximum of two reflow soldering processes. Soldering with a solder iron should be performed with a maximum soldering iron tip temperature of 350±5°C for 3 to 4 seconds. CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8564 • Fax: (508)996-3830 • www.cde.com