LM78L08

Continental Device India Limited An ISO/TS 16949, ISO 9001 and ISO 14001 Certified Company POSITIVE VOLTAGE REGULATOR pin 1.Output 2.Ground 3.Input LM78L08 TO-92 Plastic Package Fixed Voltage Monolithic Integrated Circuit Voltage Regulators is Desigbed for a Wide Range of Applications ABSOLUTE MAXIMUM RATINGS DESCRIPTION Input Voltage Power Dissipation Operating free air, Case, or Virtual Junction Temperature Range Storage Temperature Range Lead Temperature 1.6mm (1/16inch) from Case for 10 seconds Recommended Operating Conditions DESCRIPTION Input Voltage Output Current Operating Junction Temperature SYMBOL VI IO Tj MIN 10.5 0 TYP MAX 23 100 125 UNIT V mA ºC SYMBOL VIN PD Tj Tstg TL VALUE 30 625 0 to 150 - 65 to +150 260 UNIT V mW ºC ºC ºC ELECTRICAL CHARACTERISTICS (At Specified Virtual Junction Temperature, VI=14V, IO=40mA, (unless specified otherwise) DESCRIPTION SYMBOL *TEST CONDITION MIN TYP Output Voltage 25ºC 7.7 **VO IO=1mA to 40mA, 0ºC to 125ºC 7.6 VI=10.5V to 23V, 0ºC to 125ºC IO=1mA to 70mA, 0ºC to 125ºC 7.6 RBGIN Line Regulation VI=10.5V to 23V, 25ºC VI=11 to 23V, 25ºC RR VI=13V to 23V, f=120Hz, 0ºC to125ºC Ripple Rejection 37 RBGL IO=1mA to100mA, 25ºC Load Regulation IO=1mA to 40mA, 25ºC Output Noise Voltage Dropout Voltage Quiescent Current Quiescent Current Change VNO VDIF (min) IQ ∆IQIN ∆IQL f=10Hz to 100KHz, 25ºC 25ºC 25ºC 125ºC VI=11V to 23V, 0ºC to 125ºC IO=1mA to 40mA, 0ºC to 125ºC 54 1.7 MAX 8.3 8.4 8.4 175 125 80 40 UNIT V V V mV mV dB mV mV µV V mA mA mA mA 6.0 5.5 1.5 0.1 *Pulse testing techniques are used to maintain the junction temperature as close to the ambient temperature as possible. Thermal effects must be taken into account separately. All characteristics are measured with a 0.33µ F capacitor across the input and 0.1µ F capccitor across the output **This specification applies only for dc power dissipation permitted by absolute maximum ratings. LM78L08Rev120606E Continental Device India Limited Data Sheet Page 1 of 2 Customer Notes LM78L08 TO-92 Plastic Package Component Disposal Instructions 1. CDIL Semiconductor Devices are RoHS compliant, customers are requested to please dispose as per prevailing Environmental Legislation of their Country. 2. In Europe, please dispose as per EU Directive 2002/96/EC on Waste Electrical and Electronic Equipment (WEEE). Disclaimer The product information and the selection guides facilitate selection of the CDIL's Semiconductor Device(s) best suited for application in your product(s) as per your requirement. It is recommended that you completely review our Data Sheet(s) so as to confirm that the Device(s) meet functionality parameters for your application. The information furnished in the Data Sheet and on the CDIL Web Site/CD are believed to be accurate and reliable. CDIL however, does not assume responsibility for inaccuracies or incomplete information. Furthermore, CDIL does not assume liability whatsoever, arising out of the application or use of any CDIL product; neither does it convey any license under its patent rights nor rights of others. These products are not designed for use in life saving/support appliances or systems. CDIL customers selling these products (either as individual Semiconductor Devices or incorporated in their end products), in any life saving/support appliances or systems or applications do so at their own risk and CDIL will not be responsible for any damages resulting from such sale(s). CDIL strives for continuous improvement and reserves the right to change the specifications of its products without prior notice. CDIL is a registered Trademark of Continental Device India Limited C-120 Naraina Industrial Area, New Delhi 110 028, India. Telephone + 91-11-2579 6150, 4141 1112 Fax + 91-11-2579 5290, 4141 1119 email@cdil.com www.cdilsemi.com LM78L08Rev120606E Continental Device India Limited Data Sheet Page 2 of 2