PS2505L-1-A

HIGH ISOLATION VOLTAGE AC INPUT RESPONSE TYPE MULTI PHOTOCOUPLER SERIES PS2505-1, -2, -4 PS2505L-1, -2, -4 FEATURES DESCRIPTION • HIGH ISOLATION VOLTAGE BV: 5 kVr.m.s. MIN PS2505-1, -2, and -4 and PS2505L-1, -2, and -4 are optically coupled isolators containing a GaAs light emitting diode and an NPN silicon phototransistor. PS2505-1, -2, and -4 are in a plastic DIP (Dual In-line Package) and PS2505-1, -2, and -4 are in a lead bending type (Gull-wing) for surface mount. • HIGH COLLECTOR TO EMITTER VOLTAGE VCEO: 80 V MIN • HIGH CURRENT TRANSFER RATIO CTR: 300% TYP APPLICATIONS • HIGH SPEED SWITCHING tr = 3 µs, tf = 5 µs TYP • LOW COST Interface circuit for various instrumentations and control equipments. • ISOLATED CHANNELS PER EACH PACKAGE • AC LINE / DIGITAL LOGIC • AC INPUT RESPONSE • DIGITAL LOGIC / DIGITAL LOGIC • TWISTED PAIR LINE RECEIVER • TELEPHONE / TELEGRAPH LINE RECEIVER • SEQUENCE CONTROLLERS • SYSTEMS APPLICATIONS, MEASURING INSTRUMENTS ELECTRICAL CHARACTERISTICS (TA = 25°C) PART NUMBER UNITS MIN TYP MAX 1.4 Diode PARAMETERS VF Forward Voltage, IF = ±10 mA V 1.17 C Junction Capacitance, V= 0, f = 1.0 MHz pF 100 Transistor SYMBOLS PS2505-1, -2, -4 PS2505L-1, -2, -4 ICEO Collector to Emitter Dark Current, Vce = 80 V, IF = 0 nA BVCEO Collector to Emitter Breakdown Voltage, IC = 1 mA, IB = 0 V 40 60 BVECO Emitter to Collector Breakdown Voltage, IE = 100 µA, IB = 0 V 7 9 80 300 600 CTR Current Transfer Ratio , IF = ±5 mA, VCE = 5 V VCE (sat) Coupled 100 % Collector Saturation Voltage, IF = ±10 mA, IC = 2 mA V R 1-2 Isolation Resistance, Vin-out = 1.0 kV Ω C 1-2 Isolation Capacitance, V = 0, f = 1.0 MHZ pF 0.5 1, 0.3 1011 tr Rise Time VCC = 10 v, IC = 2 mA, RL = 100 Ω µs 3 tf Fall Time 1, VCC = 10 V, IC = 2 mA, RL = 100 Ω µs 5 CTR2 CTR1/CTR2 Ratio, IF = 5 mA, VCE = 5 V 0.3 Notes: 1. Test Circuit for Switching Time 1 4 3.0 IC1 , CTR2 = IC2 2. CTR1 = IF1 IF PULSE INPUT 1.0 VCC 4 3 PW = 100 µs ( Duty cycle =1/10) 8 7 6 5 16 15 14 13 12 11 10 9 IF1 IF2 IC1 VCE IC2 IF2 2 50 Ω 3 VOUT RL = 100 Ω 1 2 1 2 3 4 1 2 3 4 5 6 7 8 PS2505-1 PS2505-2 PS2505-4 California Eastern Laboratories PS2505-1, -2, -4, PS2505L-1, -2, -4 ABSOLUTE MAXIMUM RATINGS1 (TA = 25°C) SYMBOLS Diode IF PD IF (PEAK) Transistor VCEO VECO IC PC Coupled BV TSTG TOPT TSOL PT PARAMETERS Forward Current Power Dissipation PS2505-1 PS2505L-1 mA mW/Ch 80 150 80 120 A 1 1 80 7 50 150 80 7 50 120 Vr.m.s. °C °C °C 5000 -55 to +150 -55 to +100 260 5000 -55 to +150 -55 to +100 260 mW/Ch 250 200 Peak Forward Current (PW = 100 µs, Duty Cycle 1%) Collector to Emitter Voltage V Emitter to Collector Voltage V Collector Current mA Power Dissipation mW/Ch Isolation Voltage 2 Storage Temperature Operating Temperature Lead Temperature (Soldering 10 s) Total Power Dissipation RATINGS PS2505-2,4 PS2505L-2, 4 UNITS Notes: 1. Operation in excess of any one of these parameters may result in permanent damage. 2. AC voltage for 1 minute at TA = 25 °C, RH = 60 % between input and ouput. TYPICAL PERFORMANCE CURVES (TA = 25° C) TRANSISTOR POWER DISSIPATION vs. AMBIENT TEMPERATURE DIODE POWER DISSIPATION vs. AMBIENT TEMPERATURE 150 Transistor Power Dissipation, PC (mW) Diode Power Dissipation, PD (mW) 150 PS2505-1 PS2505L-1 100 1.5 mW / ˚C PS2505-2 PS2505-4 PS2505L-2 PS2505L-4 50 1.2 mW / ˚C 0 25 50 75 100 125 Ambient Temperature, TA (°C ) 150 PS2505-1 PS2505L-1 100 1.5 mW / ˚C PS2505-2 PS2505-4 PS2505L-2 PS2505L-4 50 1.2 mW / ˚C 0 25 50 75 100 125 Ambient Temperature, TA (°C ) 150 PS2505-1, -2, -4, PS2505L-1, -2, -4 TYPICAL PERFORMANCE CURVES (TA = 25 ° C) FORWARD CURRENT vs. FORWARD VOLTAGE FORWARD CURRENT vs. FORWARD VOLTAGE 100 80 60 10 Forward Current, IF (mA) Forward Current, IF (mA) 50 100 ˚C 60 ˚C 25 ˚C 0 ˚C -25 ˚C -55 ˚C 5 1 0.5 40 20 0 -20 -40 -60 0.1 0.7 0.8 0.9 1.0 1.1 1.2 1.3 1.4 -80 1.5 -1.5 -1.0 0 0.5 1.0 40 50 mA 10000 Collector Current, IC (mA) VCE = 80 V VCE = 40 V VCE = 24 V VCE = 10 V VCE = 5 V 1000 1.5 COLLECTOR CURRENT vs. COLLECTOR SATURATION VOLTAGE COLLECTOR TO EMITTER DARK CURRENT vs. AMBIENT TEMPERATURE 100 10 10 20 mA 10 mA 5 mA 5 2 mA IF = 1mA 1 0.5 1 -50 -25 0 25 50 75 0.1 100 0.2 0.4 0.6 0.8 Collector Saturation Voltage, VCEs at (V) COLLECTOR CURRENT vs. COLLECTOR TO EMITTER VOLTAGE NORMALIZED OUTPUT CURRENT vs. AMBIENT TEMPERATURE 1.0 ∆CTR, Normalized Output Current 1.2 60 50 40 50 A m 20 30 mA 10 20 mA IF = 5 mA 10 0 0 Ambient Temperature, TA (°C) 70 Collector Current, IC (mA) Collector to Emitter Dark Current, ICEO (nA) -0.5 Forward Voltage, VF (V ) Forward Voltage, VF (V ) 2 4 6 8 Collector to Emitter Voltage, VCE (V) 10 1.0 0.8 0.6 0.4 0.2 0 Normalized to 1.0 at TA = 25 ˚C IF = 5 mA, VCE = 5 V -50 -25 0 25 50 75 Ambient Temperature, TA (°C) 100 PS2505-1, -2, -4, PS2505L-1, -2, -4 TYPICAL PERFORMANCE CURVES (TA = 25 ° C) SWITCHING TIME vs. LOAD RESISTANCE CURRENT TRANSFER RATIO (CTR) vs. FORWARD CURRENT 50 tf tr 400 350 Switching Time, t (µs) Current Transfer Ratio, CTR (%) 450 300 250 200 150 10 td ts 1 IC = 2 mA VCC = 10 V TA = 25 ˚C CTR 290 % 100 50 0 0.05 0.1 0.5 1 5 10 0.1 10 50 SWITCHING TIME vs. LOAD RESISTANCE ts 100 10 tr td 10 k 50 k 100 k Load Resistance, RL (Ω) IF = 5 mA VCE = 5 V Voltage Gain, Av (dB) 0 -5 -10 100 Ω -15 RL = 1 kΩ -20 300 Ω 1 2 5 10 20 50 100 200 Frequency, f (kHz) 1k 5k TYP. 1.0 0.8 IF = 5 mA TA = 25 ˚C. 0.6 IF = 5 mA TA = 60 ˚C. 0.4 0.2 0 10 2 103 104 Operating Time, (h) FREQUENCY RESPONSE 0.5 CTR Degradation, (Relative Value) Switching Time, (µs) IC = 5 mA VCC = 5 V TA = 25˚C CTR 290 % 5 500 1.2 tf 500 1 k 100 LONG TERM CTR DEGRADATION 1000 1 100 50 Load Resistance, RL (Ω) Forward Current, IF (mA) 500 105 10 k PS2505-1, -2, -4, PS2505L-1, -2, -4 OUTLINE DIMENSIONS (Units in mm) PS2505-2 PS2505-1 8 7 6 5 4 3 5.1 MAX 10.2 MAX 6.5 3.8 MAX 2.54 1. Anode, Cathode 2. Cathode, Anode 3. Emitter 4. Collector 7.62 1 2 3 4 6.5 1 2 3.8 MAX 4.55 MAX. 2.54 1, 3. Anode, Cathode 2, 4. Cathode, Anode 5, 7. Emitter 6, 8. Collector 7.62 4.55 MAX 2.8 MIN. 0.65 2.8 MIN 0.65 0.50 ± 0.10 0.25 M 1.34 0 to 15 ˚ 0.50 ± 0.10 0.25 M 1.34 0 to 15 ˚ PS2505-4 20.3 MAX 16 15 14 13 12 11 10 9 6.5 1 2 3 4 5 6 7 8 3.8 MAX 2.54 1, 3, 5, 7. 2, 4, 6, 8. 9, 11, 13, 15. 10, 12, 14, 16. 7.62 4.55 MAX Anode, Cathode Cathode, Anode Emitter Collector 2.8 MIN 0.65 0.50 ± 0.10 0.25 M 0 to 15˚ 1.34 OUTLINE DIMENSIONS (Units in mm) PS2505L-1 PS2505L-2 4 3 8 7 6 5 10.2 MAX 5.1 MAX 1 2 3 4 1 2 7.62 2.54 6.5 3.8 MAX 7.62 1. Anode, Cathode 2. Cathode, Anode 3. Emitter 4. Collector 2.54 6.5 3.8 MAX 0.05 to 0.2 1, 3. Anode, Cathode 2, 4. Cathode, Anode 5, 7. Emitter 6, 8. Collector 0.05 to 0.2 0.9 ± 0.25 1.34 ± 0.10 0.25 M 0.9 ± 0.25 1.34 ± 0.10 0.25 M 9.60 ± 0.4 9.60 ± 0.4 PS2505L-4 16 15 14 13 12 11 10 9 20.3 MAX 7.62 2.54 6.5 3.8 MAX 1 2 3 4 5 6 7 8 Anode, Cathode Cathode, Anode Emitter Collector 1, 3, 5, 7. 2, 4, 6, 8. 9, 11, 13, 15. 10, 12, 14, 16. 0.05 to 0.2 1.34 ± 0.10 0.25 M 0.9 ± 0.25 9.60 ± 0.4 Life Support Applications These NEC products are not intended for use in life support devices, appliances, or systems where the malfunction of these products can reasonably be expected to result in personal injury. The customers of CEL using or selling these products for use in such applications do so at their own risk and agree to fully indemnify CEL for all damages resulting from such improper use or sale. EXCLUSIVE NORTH AMERICAN AGENT FOR NEC RF, MICROWAVE & OPTOELECTRONIC SEMICONDUCTORS CALIFORNIA EASTERN LABORATORIES • Headquarters • 4590 Patrick Henry Drive • Santa Clara, CA 95054-1817 • (408) 988-3500 • Telex 34-6393 • FAX (408) 988-0279 DATA SUBJECT TO CHANGE WITHOUT NOTICE Internet: http://WWW.CEL.COM 07/08/2002