DATA SHEET
PHOTOCOUPLER
PS2565-1,PS2565L-1,PS2565L1-1,PS2565L2-1
HIGH ISOLATION VOLTAGE
AC INPUT RESPONSE TYPE
MULTI PHOTOCOUPLER SERIES
−NEPOC Series−
DESCRIPTION
The PS2565-1 is optically coupled isolators containing GaAs light emitting diodes and an NPN silicon
phototransistor.
The PS2565-1 is in a plastic DIP (Dual In-line Package) and the PS2565L-1 is lead bending type (Gull-wing) for
surface mount.
The PS2565L1-1 is lead bending type for long creepage distance.
The PS2565L2-1 is lead bending type for long creepage distance (Gull-wing) for surface mount.
FEATURES
PIN CONNECTION
• AC input response
(Top View)
• High Isolation voltage (BV = 5 000 Vr.m.s.)
• High collector to emitter voltage (VCEO = 80 V)
4
3
1
2
• High current transfer ratio (CTR = 200% TYP.)
• High-speed switching (tr = 3 μs TYP., tf = 5 μs TYP.)
• Ordering number of taping product: PS2565L-1-F3 : 2 000 pcs/reel
: PS2565L2-1-E3: 1 000 pcs/reel
1. Anode,
Cathode
2. Cathode,
Anode
3. Emitter
4. Collector
• Safety standards
• UL approved: No. E72422
• CSA approved: No. CA 101391 (CA5A, CAN/CSA-C22.2 60065, 60950)
• BSI approved: No. 7112/7420
• SEMKO approved: No. 903238
• NEMKO approved: No. P09210868
• DEMKO approved: No. 314999
• FIMKO approved: No. FI 25119
• DIN EN60747-5-2 (VDE0884 Part2) approved: No. 40008862 (Option)
APPLICATIONS
• Telephone/FAX.
• FA/OA equipment
• Programmable logic controller
The information in this document is subject to change without notice. Before using this document, please
confirm that this is the latest version.
Document No. PN10236EJ05V0DS (5th edition)
Date Published November 2009 NS
Printed in Japan
The mark shows major revised points.
The revised points can be easily searched by copying an "" in the PDF file and specifying it in the "Find what:" field.
PS2565-1,PS2565L-1,PS2565L1-1,PS2565L2-1
PACKAGE DIMENSIONS (UNIT : mm)
DIP Type
Long Creepage Distance
PS2565L1-1
PS2565-1
4.6±0.35
4.6±0.35
4
3
1
2
6.5±0.5
6.5±0.5
4 3
1 2
0 to 15° +0.1
0.25 –0.05
1.25±0.15
10.16
3.5±0.3
3.15
3.85
±0.35 ±0.4
3.5±0.3
3.2±0.4 4.15±0.4
7.62
0.50±0.1
0.25 M
1.25±0.15
0.50±0.10
0.25 M
+0.1
0.25–0.05
2.54
0 to 15°
2.54
Lead Bending Type (Gull-Wing)
Long Creepage Distance (Gull-Wing)
PS2565L2-1
PS2565L-1
4.6±0.35
4.6±0.35
3
1
2
3
1
2
2.54
PHOTOCOUPLER CONSTRUCTION
Unit (MIN.)
Air Distance
7 mm
Outer Creepage Distance
7 mm
Inner Creepage Distance
4 mm
Isolation Thickness
2
0.25–0.05
+0.1
0.9±0.25
10.16
+0.2
2.54
0.15
Parameter
0.25±0.2
3.5±0.3
0.1 +0.1
–0.05
0.25 +0.1
–0.05
6.5±0.5
3.5±0.3
0.25 M
0.25
1.25±0.15
0.25 M
0.9±0.25
9.60±0.4
1.25±0.15
4
6.5±0.5
4
0.4 mm
Data Sheet PN10236EJ05V0DS
11.8–0.5
PS2565-1,PS2565L-1,PS2565L1-1,PS2565L2-1
MARKING EXAMPLE
No. 1 pin
Mark
2565
NJ931
N
J
Assembly Lot
9 31
Week Assembled
Year Assembled
(Last 1 Digit)
In-house Code
CTR Rank Code
Package
Pb-Free
Pb-Free and
Halogen Free
Made in Japan Made in Taiwan
New PKG
J
K
New PKG
R
Y
*1
*1 Special version
Data Sheet PN10236EJ05V0DS
3
PS2565-1,PS2565L-1,PS2565L1-1,PS2565L2-1
ORDERING INFORMATION
Part Number
Order Number
Solder Plating
Packing Style
Safety Standard
Specification
Pb-Free
Approval
PS2565-1
PS2565-1-A
Magazine case 100 pcs
PS2565L-1
PS2565L-1-A
(UL, CSA, BSI,
PS2565L1-1
PS2565L1-1-A
SEMKO, NEMKO,
PS2565L2-1
PS2565L2-1-A
DEMKO, FIMKO
PS2565L-1-F3
PS2565L-1-F3-A
Embossed Tape 2 000 pcs/reel
PS2565L2-1-E3
PS2565L2-1-E3-A
Embossed Tape 1 000 pcs/reel
PS2565-1-V
PS2565-1-V-A
Magazine case 100 pcs
PS2565L-1-V
PS2565L-1-V-A
(VDE0884 Part2)
PS2565L1-1-V
PS2565L1-1-V-A
approved products
PS2565L2-1-V
PS2565L2-1-V-A
(option)
PS2565L-1-V-F3
PS2565L-1-V-F3-A
Embossed Tape 2 000 pcs/reel
PS2565L2-1-V-E3
PS2565L2-1-V-E3-A
Embossed Tape 1 000 pcs/reel
PS2565-1
PS2565-1Y-A
Special version
PS2565L-1
PS2565L-1Y-A
(Pb-Free and
(UL, CSA, BSI,
PS2565L1-1
PS2565L1-1Y-A
Halogen Free)
SEMKO, NEMKO,
PS2565L2-1
PS2565L2-1Y-A
PS2565L-1-F3
PS2565L-1Y-F3-A
Embossed Tape 2 000 pcs/reel
PS2565L2-1-E3
PS2565L2-1Y-E3-A
Embossed Tape 1 000 pcs/reel
PS2565-1-V
PS2565-1Y-V-A
Magazine case 100 pcs
PS2565L-1-V
PS2565L-1Y-V-A
(VDE0884 Part2)
PS2565L1-1-V
PS2565L1-1Y-V-A
approved products
PS2565L2-1-V
PS2565L2-1Y-V-A
(option)
PS2565L-1-V-F3
PS2565L-1Y-V-F3-A
Embossed Tape 2 000 pcs/reel
PS2565L2-1-V-E3
PS2565L2-1Y-V-E3-A
Embossed Tape 1 000 pcs/reel
Magazine case 100 pcs
Standard products
PS2565-1
DIN EN60747-5-2
Standard products
DEMKO, FIMKO
Data Sheet PN10236EJ05V0DS
Number
approved)
approved)
DIN EN60747-5-2
*1 For the application of the Safety Standard, following part number should be used.
4
Application Part
PS2565-1
*1
PS2565-1,PS2565L-1,PS2565L1-1,PS2565L2-1
ABSOLUTE MAXIMUM RATINGS (TA = 25°C, unless otherwise specified)
Parameter
Symbol
Ratings
Unit
IF
80
mA
ΔPD/°C
1.5
mW/°C
PD
150
mW
IFP
1
A
Collector to Emitter Voltage
VCEO
80
V
Emitter to Collector Voltage
VECO
7
V
IC
50
mA
ΔPC/°C
1.5
mW/°C
PC
150
mW
BV
5 000
Vr.m.s.
Operating Ambient Temperature
TA
–55 to +100
°C
Storage Temperature
Tstg
–55 to +150
°C
Diode
Forward Current (DC)
Power Dissipation Derating
Power Dissipation
*1
Peak Forward Current
Transistor
Collector Current
Power Dissipation Derating
Power Dissipation
Isolation Voltage
*2
*1 PW = 100 μs, Duty Cycle = 1%
*2 AC voltage for 1 minute at TA = 25°C, RH = 60% between input and output.
Pins 1-2 shorted together, 3-4 shorted together.
Data Sheet PN10236EJ05V0DS
5
PS2565-1,PS2565L-1,PS2565L1-1,PS2565L2-1
ELECTRICAL CHARACTERISTICS (TA = 25°C)
Parameter
Diode
Transistor
Symbol
Conditions
MIN.
TYP.
MAX.
Unit
1.4
V
Forward Voltage
VF
IF = ±10 mA
1.17
Terminal Capacitance
Ct
V = 0 V, f = 1.0 MHz
100
ICEO
VCE = 80 V, IF = 0 mA
CTR
IF = ±5 mA, VCE = 5 V
80
CTR1/
IF = 5 mA, VCE = 5 V
0.3
Collector to Emitter Dark
pF
100
nA
200
400
%
1.0
3.0
Current
Coupled
Current Transfer Ratio
(IC/IF)
CTR Ratio
*1
CTR2
Collector Saturation
VCE (sat)
IF = ±10 mA, IC = 2 mA
0.3
V
Voltage
Isolation Resistance
RI-O
VI-O = 1.0 kVDC
Isolation Capacitance
CI-O
V = 0 V, f = 1.0 MHz
*2
Rise Time
tr
*2
tf
Fall Time
10
VCC = 10 V, IC = 2 mA, RL = 100 Ω
Ω
11
0.5
pF
3
μs
5
*1 CTR1 = IC1/IF1, CTR2 = IC2/IF2
IC1
IF1
VCE
IC2
IF2
*2 Test circuit for switching time
Pulse Input
IF
VCC
PW = 100 μ s
Duty Cycle = 1/10
Input
ton
50 Ω
VOUT
RL = 100 Ω
td
toff
ts
90%
Output
10%
tr
6
Data Sheet PN10236EJ05V0DS
tf
PS2565-1,PS2565L-1,PS2565L1-1,PS2565L2-1
TYPICAL CHARACTERISTICS (TA = 25°C, unless otherwise specified)
DIODE POWER DISSIPATION vs.
AMBIENT TEMPERATURE
Transistor Power Dissipation PC (mW)
Diode Power Dissipation PD (mW)
150
100
1.5 mW/°C
50
0
25
50
75
100
TRANSISTOR POWER DISSIPATION
vs. AMBIENT TEMPERATURE
125
150
100
1.5 mW/°C
50
0
150
25
125
150
FORWARD CURRENT vs.
FORWARD VOLTAGE
FORWARD CURRENT vs.
FORWARD VOLTAGE
100
80
50
60
TA = +100°C
+60°C
+25°C
Forward Current IF (mA)
Forward Current IF (mA)
100
Ambient Temperature TA (°C)
Ambient Temperature TA (°C)
10
5
0°C
–25°C
–55°C
1
0.5
40
20
0
–20
–40
–60
0.1
0.7
0.8
0.9
1.0
1.1
1.2
1.3
1.4
–80
1.5
–1.5
–1.0
–0.5
0
0.5
1.0
1.5
Forward Voltage VF (V)
Forward Voltage VF (V)
COLLECTOR TO EMITTER DARK
CURRENT vs. AMBIENT TEMPERATURE
COLLECTOR CURRENT vs.
COLLECTOR SATURATION VOLTAGE
40
50 mA
20 mA
10 mA
10 000
VCE = 80 V
40 V
24 V
10 V
5V
1 000
Collector Current IC (mA)
Collector to Emitter Dark Current ICEO (nA)
75
50
100
10
1
– 50
–25
0
25
50
75
100
10
2 mA
IF = 1 mA
1
0.5
0.1
0
Ambient Temperature TA (°C)
Remark
5 mA
5
0.2
0.4
0.6
0.8
1.0
Collector Saturation Voltage VCE (sat) (V)
The graphs indicate nominal characteristics.
Data Sheet PN10236EJ05V0DS
7
PS2565-1,PS2565L-1,PS2565L1-1,PS2565L2-1
NORMALIZED CURRENT TRANSFER
RATIO vs. AMBIENT TEMPERATURE
COLLECTOR CURRENT vs.
COLLECTOR TO EMITTER VOLTAGE
Normalized Current Transfer Ratio CTR
70
Collector Current IC (mA)
60
50
40
50
mA
30
20
mA A
m
10
20
IF = 5 mA
10
0
4
2
8
6
10
1.2
1.0
0.8
0.6
0.4
0
–50
–25
0
25
50
75
Collector to Emitter Voltage VCE (V)
Ambient Temperature TA (°C)
CURRENT TRANSFER RATIO vs.
FORWARD CURRENT
SWITCHING TIME vs.
LOAD RESISTANCE
1 000
450
400
300
Switching Time t ( μ s)
350
Sample A
B
C
250
200
150
100
ts
100
10
tr
50
0
100
tf
IF = 5 mA,
VCC = 5 V,
CTR = 290%
VCE = 5 V
Current Transfer Ratio CTR (%)
Normalized to 1.0
at TA = 25°C,
IF = 5 mA, VCE = 5 V
0.2
0.05 0.1
0.5
1
5
10
1
100
50
td
500 1 k
Forward Current IF (mA)
5 k 10 k
50 k 100 k
Load Resistance RL (Ω)
SWITCHING TIME vs.
LOAD RESISTANCE
FREQUENCY RESPONSE
50
tf
tr
IF = 5 mA,
VCE = 5 V
0
10
Normalized Gain GV
Switching Time t ( μ s)
IC = 2 mA,
VCC = 10 V,
CTR = 290%
td
ts
1
–5
–10
100 Ω
–15
RL = 1 kΩ
–20
0.1
10
300 Ω
50 100
500 1 k
5 k 10 k
0.5 1
Load Resistance RL (Ω)
Remark
8
2
5
10 20
50 100 200 500
Frequency f (kHz)
The graphs indicate nominal characteristics.
Data Sheet PN10236EJ05V0DS
PS2565-1,PS2565L-1,PS2565L1-1,PS2565L2-1
LONG TERM CTR DEGRADATION
1.2
TYP.
CTR (Relative Value)
1.0
0.8
IF = 5 mA
TA = 25°C
0.6
IF = 5 mA
TA = 60°C
0.4
0.2
0
102
103
104
105
Time (Hr)
Remark
The graph indicates nominal characteristics.
Data Sheet PN10236EJ05V0DS
9
PS2565-1,PS2565L-1,PS2565L1-1,PS2565L2-1
TAPING SPECIFICATIONS (UNIT : mm)
1.55±0.1
4.5 MAX.
10.3±0.1
1.5 +0.1
–0
16.0±0.3
2.0±0.1
4.0±0.1
1.75±0.1
Outline and Dimesions (Tape)
7.5±0.1
4.0±0.1
5.3±0.1
8.0±0.1
0.4
Tape Direction
PS2565L-1-F3
Outline and Dimensions (Reel)
2.0±0.5
R 1.0
φ 21.0±0.8
φ 100±1.0
2.0±0.5
φ 13.0±0.2
φ 330±2.0
17.5±1.0
21.5±1.0
Packing: 2 000 pcs/reel
10
Data Sheet PN10236EJ05V0DS
15.9 to 19.4
Outer edge of
flange
PS2565-1,PS2565L-1,PS2565L1-1,PS2565L2-1
2.05±0.1
4.4±0.2
12.35±0.15
11.5±0.1
1.55±0.1
24.0±0.3
2.0±0.1
4.0±0.1
1.75±0.1
Outline and Dimensions (Tape)
6.6±0.2
0.38
12.0±0.1
Tape Direction
PS2565L2-1-E3
Outline and Dimensions (Reel)
R 1.0
φ 21.0±0.8
φ 100±1.0
2.0±0.5
φ13.0±0.2
φ 330±2.0
2.0±0.5
25.5±1.0
29.5±1.0
Packing: 1 000 pcs/reel
Data Sheet PN10236EJ05V0DS
23.9 to 27.4
Outer edge of
flange
11
PS2565-1,PS2565L-1,PS2565L1-1,PS2565L2-1
NOTES ON HANDLING
1. Recommended soldering conditions
(1) Infrared reflow soldering
• Peak reflow temperature
260°C or below (package surface temperature)
• Time of peak reflow temperature
10 seconds or less
• Time of temperature higher than 220°C
60 seconds or less
• Time to preheat temperature from 120 to 180°C
120±30 s
• Number of reflows
Three
• Flux
Rosin flux containing small amount of chlorine (The flux with a
maximum chlorine content of 0.2 Wt% is recommended.)
Package Surface Temperature T (°C)
Recommended Temperature Profile of Infrared Reflow
(heating)
to 10 s
260°C MAX.
220°C
to 60 s
180°C
120°C
120±30 s
(preheating)
Time (s)
(2) Wave soldering
• Temperature
260°C or below (molten solder temperature)
• Time
10 seconds or less
• Preheating conditions
120°C or below (package surface temperature)
• Number of times
One (Allowed to be dipped in solder including plastic mold portion.)
• Flux
Rosin flux containing small amount of chlorine (The flux with a maximum chlorine
content of 0.2 Wt% is recommended.)
(3) Soldering by soldering iron
• Peak temperature (lead part temperature)
350°C or below
• Time (each pins)
3 seconds or less
• Flux
Rosin flux containing small amount of chlorine (The flux with a
maximum chlorine content of 0.2 Wt% is recommended.)
(a) Soldering of leads should be made at the point 1.5 to 2.0 mm from the root of the lead.
(b) Please be sure that the temperature of the package would not be heated over 100°C.
12
Data Sheet PN10236EJ05V0DS
PS2565-1,PS2565L-1,PS2565L1-1,PS2565L2-1
(4) Cautions
• Fluxes
Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent.
2. Cautions regarding noise
Be aware that when voltage is applied suddenly between the photocoupler’s input and output or between
collector-emitters at startup, the output transistor may enter the on state, even if the voltage is within the absolute
maximum ratings.
3. Measurement conditions of current transfer ratios (CTR), which differ according to photocoupler
Check the setting values before use, since the forward current conditions at CTR measurement differ according
to product.
When using products other than at the specified forward current, the characteristics curves may differ from the
standard curves due to CTR value variations or the like. This tendency may sometimes be obvious, especially
below IF = 1 mA.
Therefore, check the characteristics under the actual operating conditions and thoroughly take variations or the
like into consideration before use.
USAGE CAUTIONS
1. Protect against static electricity when handling.
2. Avoid storage at a high temperature and high humidity.
Data Sheet PN10236EJ05V0DS
13
PS2565-1,PS2565L-1,PS2565L1-1,PS2565L2-1
SPECIFICATION OF VDE MARKS LICENSE DOCUMENT
Parameter
Symbol
Climatic test class (IEC 60068-1/DIN EN 60068-1)
Spec.
Unit
55/100/21
Dielectric strength
maximum operating isolation voltage
Test voltage (partial discharge test, procedure a for type test and random test)
UIORM
890
Vpeak
Upr
1 335
Vpeak
Upr
1 669
Vpeak
UTR
8 000
Vpeak
Upr = 1.5 × UIORM, Pd < 5 pC
Test voltage (partial discharge test, procedure b for all devices)
Upr = 1.875 × UIORM, Pd < 5 pC
Highest permissible overvoltage
Degree of pollution (DIN EN 60664-1 VDE0110 Part 1)
Comparative tracking index (IEC 60112/DIN EN 60112 (VDE 0303 Part 11))
2
CTI
Material group (DIN EN 60664-1 VDE0110 Part 1)
175
III a
Storage temperature range
Tstg
–55 to +150
°C
Operating temperature range
TA
–55 to +100
°C
VIO = 500 V dc at TA = 25°C
Ris MIN.
10
12
Ω
VIO = 500 V dc at TA MAX. at least 100°C
Ris MIN.
10
11
Ω
Package temperature
Tsi
175
°C
Current (input current IF, Psi = 0)
Isi
400
mA
Power (output or total power dissipation)
Psi
700
mW
Ris MIN.
10
Isolation resistance, minimum value
Safety maximum ratings (maximum permissible in case of fault, see thermal
derating curve)
Isolation resistance
VIO = 500 V dc at TA = Tsi
14
Data Sheet PN10236EJ05V0DS
9
Ω
PS2565-1,PS2565L-1,PS2565L1-1,PS2565L2-1
Caution
GaAs Products
This product uses gallium arsenide (GaAs).
GaAs vapor and powder are hazardous to human health if inhaled or ingested, so please observe
the following points.
• Follow related laws and ordinances when disposing of the product. If there are no applicable laws
and/or ordinances, dispose of the product as recommended below.
1. Commission a disposal company able to (with a license to) collect, transport and dispose of
materials that contain arsenic and other such industrial waste materials.
2. Exclude the product from general industrial waste and household garbage, and ensure that the
product is controlled (as industrial waste subject to special control) up until final disposal.
• Do not burn, destroy, cut, crush, or chemically dissolve the product.
• Do not lick the product or in any way allow it to enter the mouth.
To our customers,
Old Company Name in Catalogs and Other Documents
On April 1st, 2010, NEC Electronics Corporation merged with Renesas Technology
Corporation, and Renesas Electronics Corporation took over all the business of both
companies. Therefore, although the old company name remains in this document, it is a valid
Renesas Electronics document. We appreciate your understanding.
Renesas Electronics website: http://www.renesas.com
April 1st, 2010
Renesas Electronics Corporation
Issued by: Renesas Electronics Corporation (http://www.renesas.com)
Send any inquiries to http://www.renesas.com/inquiry.
NOTICE
1.
Descriptions of circuits, software and other related information in this document are provided only to illustrate the operation of semiconductor products and
application examples. You are fully responsible for the incorporation of these circuits, software, and information in the design of your equipment. California
Eastern Laboratories and Renesas Electronics assumes no responsibility for any losses incurred by you or third parties arising from the use of these circuits,
software, or information.
2.
California Eastern Laboratories has used reasonable care in preparing the information included in this document, but California Eastern Laboratories does
not warrant that such information is error free. California Eastern Laboratories and Renesas Electronics assumes no liability whatsoever for any damages
incurred by you resulting from errors in or omissions from the information included herein.
3.
California Eastern Laboratories and Renesas Electronics do not assume any liability for infringement of patents, copyrights, or other intellectual property
rights of third parties by or arising from the use of Renesas Electronics products or technical information described in this document. No license, express,
implied or otherwise, is granted hereby under any patents, copyrights or other intellectual property rights of California Eastern Laboratories or Renesas
Electronics or others.
4.
You should not alter, modify, copy, or otherwise misappropriate any Renesas Electronics product, whether in whole or in part. California Eastern
Laboratories and Renesas Electronics assume no responsibility for any losses incurred by you or third parties arising from such alteration, modification, copy
or otherwise misappropriation of Renesas Electronics product.
5.
Renesas Electronics products are classified according to the following two quality grades: “Standard” and “High Quality”. The recommended applications
for each Renesas Electronics product depends on the product’s quality grade, as indicated below. “Standard”: Computers; office equipment; communications
equipment; test and measurement equipment; audio and visual equipment; home electronic appliances; machine tools; personal electronic equipment; and
industrial robots etc. “High Quality”: Transportation equipment (automobiles, trains, ships, etc.); traffic control systems; anti-disaster systems; anti-crime
systems; and safety equipment etc. Renesas Electronics products are neither intended nor authorized for use in products or systems that may pose a direct
threat to human life or bodily injury (artificial life support devices or systems, surgical implantations etc.), or may cause serious property damages (nuclear
reactor control systems, military equipment etc.). You must check the quality grade of each Renesas Electronics product before using it in a particular
application. You may not use any Renesas Electronics product for any application for which it is not intended. California Eastern Laboratories and Renesas
Electronics shall not be in any way liable for any damages or losses incurred by you or third parties arising from the use of any Renesas Electronics product
for which the product is not intended by California Eastern Laboratories or Renesas Electronics.
6.
You should use the Renesas Electronics products described in this document within the range specified by California Eastern Laboratories, especially with
respect to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation characteristics, installation and other product
characteristics. California Eastern Laboratories shall have no liability for malfunctions or damages arising out of the use of Renesas Electronics products
beyond such specified ranges.
7.
Although Renesas Electronics endeavors to improve the quality and reliability of its products, semiconductor products have specific characteristics such as
the occurrence of failure at a certain rate and malfunctions under certain use conditions. Further, Renesas Electronics products are not subject to radiation
resistance design. Please be sure to implement safety measures to guard them against the possibility of physical injury, and injury or damage caused by
fire in the event of the failure of a Renesas Electronics product, such as safety design for hardware and software including but not limited to redundancy,
fire control and malfunction prevention, appropriate treatment for aging degradation or any other appropriate measures. Because the evaluation of
microcomputer software alone is very difficult, please evaluate the safety of the final products or systems manufactured by you.
Please contact a California Eastern Laboratories sales office for details as to environmental matters such as the environmental compatibility of each Renesas
8.
Electronics product. Please use Renesas Electronics products in compliance with all applicable laws and regulations that regulate the inclusion or use of
controlled substances, including without limitation, the EU RoHS Directive. California Eastern Laboratories and Renesas Electronics assume no liability for
damages or losses occurring as a result of your noncompliance with applicable laws and regulations.
9.
Renesas Electronics products and technology may not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited
under any applicable domestic or foreign laws or regulations. You should not use Renesas Electronics products or technology described in this document
for any purpose relating to military applications or use by the military, including but not limited to the development of weapons of mass destruction. When
exporting the Renesas Electronics products or technology described in this document, you should comply with the applicable export control laws and
regulations and follow the procedures required by such laws and regulations.
10. It is the responsibility of the buyer or distributor of California Eastern Laboratories, who distributes, disposes of, or otherwise places the Renesas Electronics
product with a third party, to notify such third party in advance of the contents and conditions set forth in this document, California Eastern Laboratories and
Renesas Electronics assume no responsibility for any losses incurred by you or third parties as a result of unauthorized use of Renesas Electronics products.
11. This document may not be reproduced or duplicated in any form, in whole or in part, without prior written consent of California Eastern Laboratories.
12. Please contact a California Eastern Laboratories sales office if you have any questions regarding the information contained in this document or Renesas
Electronics products, or if you have any other inquiries.
NOTE 1: “Renesas Electronics” as used in this document means Renesas Electronics Corporation and also includes its majority-owned subsidiaries.
NOTE 2: “Renesas Electronics product(s)” means any product developed or manufactured by or for Renesas Electronics.
NOTE 3: Products and product information are subject to change without notice.
CEL Headquarters • 4590 Patrick Henry Drive, Santa Clara, CA 95054 • Phone (408) 919-2500 • www.cel.com
For a complete list of sales offices, representatives and distributors,
Please visit our website: www.cel.com/contactus