PS2701-1-V-F3-P-A

NEC's HIGH ISOLATION VOLTAGE SOP MULTI PHOTOCOUPLER PS2701-1 FEATURES DESCRIPTION • HIGH ISOLATION VOLTAGE BV: 3.75 k Vr.m.s. NEC's PS2701-1 is an optically coupled isolator containing a GaAs light emitting diode and a NPN silicon phototransistor. This device is mounted in a plastic SOP (Small Outline Package) for high density applications and has a shield effect to cut off ambient light. • SOP (SMALL OUT-LINE PACKAGE) • ISOLATED CHANNELS PER EACH PACKAGE • HIGH SPEED SWITCHING tr = 3 µs TYP, tf = 5 µs TYP • LOW COLLECTOR DARK CURRENT ICEO: 5 nA TYP @ TA = 25 °C, VCE = 40 V • TAPE AND REEL AVAILABLE APPLICATIONS Interface circuit for various instrumentations and control equipment. • AC LINE/DIGITAL LOGIC • DIGITAL LOGIC INTERFACE • TWISTED PAIR LINE RECEIVER • TELEPHONE/TELEGRAPH LINE RECEIVER • HIGH FREQUENCY POWER SUPPLY FEEDBACK CONTROL • RELAY CONTACT MONITOR • POWER SUPPLY MONITOR ELECTRICAL CHARACTERISTICS (TA = 25°C) PART NUMBER SYMBOLS Forward Voltage, IF = 5 mA V IR Reverse Current, VR = 5 V µA Ct Terminal Capacitance, V = 0, f = 1.0 MHz pF ICEO Collector to Emitter Dark Current, VCE = 40 V, IF = 0 nA CTR Current Transfer Ratio1, IF = 5 mA, VCE = 5 V % Collector Saturation Voltage, IF = 10 mA, IC = 2 mA V RI-O Isolation Resistance, VIN-OUT = 1.0 k VDC Ω CI-O Diode Transistor UNITS VF VCE (sat) Coupled PARAMETERS PS2701-1 MIN TYP MAX 1.1 1.4 5 30 100 50 100 0.3 1011 Isolation Capacitance, V = 0, f = 1.0 MHZ pF 0.4 tr Rise Time2, VCC = 5 V, IC = 2 mA, RL = 100 Ω µs 3 tf Fall Time2, VCC = 5 V, IC = 2 mA, RL = 100 Ω µs 5 Notes: 1. CTR rank 300 2. Test Circuit for Switching Time L: 100 to 300 % M: 50 to 150 % P: 150 to 300% 4 3 VCC PULSE INPUT PW = 100 µS Duty Cycle = 1/10 1 4 2 VOUT 3 RL = 100 Ω IF 1 2 50 Ω PS2701-1 California Eastern Laboratories PS2701-1 ABSOLUTE MAXIMUM RATINGS1 (TA = 25°C) SYMBOLS Diode IF PARAMETERS UNITS RATINGS PS2701-1 mA V mW/Ch 50 6 80 A 1 V 40 V 6 mA/Ch mW/Ch 80 150 Vr.m.s. 3750 Storage Temperature °C -55 to +150 Operating Ambient Temperature °C -55 to +100 Forward Current (DC) Reverse Voltage Power Dissipation VR PD Peak Forward Current (PW = 100 µs, Duty Cycle 1%) IF (PEAK) Transistor VCEO Collector to Emitter Voltage (IC = 1mA, IB = 0) VECO Emitter to Collector Voltage (IE = 100µA, IB = 0) IC Collector Current PC Power Dissipation Coupled BV Isolation Voltage2 TSTG TA TYPICAL PERFORMANCE CURVES (TA = 25 Notes: 1. Operation in excess of any one of these parameters may result in permanent damage. 2. AC voltage for 1 minute at TA = 25 °C, RH = 60 % between input and ouput. °C) TRANSISTOR POWER DISSIPATION vs. AMBIENT TEMPERATURE DIODE POWER DISSIPATION vs. AMBIENT TEMPERATURE 200 Transistor Power Dissipation, PC (mW) Diode Power Dissipation, PD (mW) 100 75 50 25 25 0 50 75 100 50 25 50 75 100 Ambient Temperature, TA (°C) Ambient Temperature , TA (°C) FORWARD CURRENT vs. FORWARD VOLTAGE COLLECTOR CURRENT vs. COLLETOR TO EMITTER VOLTAGE 50 TA = 100 ˚C 75 ˚C 50 ˚C Collector Current, IC (mA) Forward Current, IF (mA) PS2701-1 1.5 mW/˚C 0 100 100 10 25 ˚C 0 ˚C -25 ˚C -55 ˚C 1 0.1 0.01 0.6 150 0.8 1 1.2 1.4 Forward Voltage, VF (V) 1.6 30 40 mA 20 mA 30 15 mA 20 10 mA 10 0 IF = 5 mA 2 4 6 8 Collector to Emitter Voltage, VCE (V) 10 PS2701-1 TYPICAL PERFORMANCE CURVES (TA = 25 °C) COLLECTOR CURRENT vs. COLLECTOR SATURATION VOLTAGE 30 10000 25 mA 20 10 mA 40 V 24 V 10 V 1000 Collector Current, IC (mA) Collector to Emitter Dark Current, ICEO (nA) COLLECTOR TO EMITTER DARK CURRENT vs. AMBIENT TEMPERATURE 100 10 1 10 5 mA 5 2 mA 2 1 IF = 1 mA 0.5 0.2 0.1 1.0 -60 -20 -40 0 20 40 60 80 0 100 0.4 0.2 0.6 0.8 1.0 Ambient Temperature, TA (°C) Collector Saturation Voltage, VCE(sat) (V) NORMALIZED OUTPUT CURRENT vs. AMBIENT TEMPERATURE CURRENT TRANSFER RATIO vs. FORWARD CURRENT 300 1.2 Current Transfer Ratio, CTR (%) Normalized Output Current, CTR VCE = 5 V 1.0 0.8 0.6 0.4 Normalized to 1.0 at TA = 25 ˚C IF = 5 mA, VCE = 5 V 0.2 -25 0 25 50 75 200 150 Sample B 100 Sample C 50 0 0.05 0 -55 Sample A 250 100 0.1 0.5 SWITCHING TIME vs. LOAD RESISTANCE 0.8 Normalized Gain, AV Switching Time,t (µs) 50 FREQUENCY RESPONSE ton toff 10 5 td ts 1 0.6 0.4 100 Ω RL = 1kΩ 510 Ω 300 Ω 0.2 0.5 50 10 1.0 VCC = 5 V IC = 2 mA 50 5 Forward Current, IF (mA) Ambient Temperature, TA ( °C) 100 1 100 500 1k Load Resistance, RL (Ω) 2k 0 5 10 50 100 Frequency, f (KHz) 500 PS2701-1 TYPICAL PERFORMANCE CURVES (TA = 25 °C) SWITCHING TIME vs. LOAD RESISTANCE CTR DEGRADATION 1000 IF = 5 mA VCC = 5 V TA = 25 ˚C CTR = 100 % CTR Test condition IF = 5 mA, VCE = 5 mA tf 1.0 ts 100 ∆ CTR, Normalized Switching Time,t (µs) 500 50 10 5 1 tr 0.5 td 0.8 IF = 5 mA 0.6 IF = 20 mA IF = 40 mA 0.4 0.2 100 500 1k 5 k 10 k 0 50 k 100 k 102 Load Resistance, RL (Ω) 103 104 105 Time, Hr OUTLINE DIMENSIONS (Units in mm) PS2701-1 PIN CONNECTION (Top View) 4 3 4 3 1. 2. 3. 4. Anode Cathode Emitter Collecter 1 2 1 2 7.0 ± 0.3 4.4 4.5 MAX 2.0 +0.10 0.15 -0.05 2.3 MAX 0.1 ± 0.1 2.54 1.2 MAX 1.3 0.5 ± 0.3 0.4+0.10 -0.05 Life Support Applications These NEC products are not intended for use in life support devices, appliances, or systems where the malfunction of these products can reasonably be expected to result in personal injury. The customers of CEL using or selling these products for use in such applications do so at their own risk and agree to fully indemnify CEL for all damages resulting from such improper use or sale. 10/14/2003 A Business Partner of NEC Compound Semiconductor Devices, Ltd.