PS2703-1-F4-K-A

NEC's HIGH ISOLATION VOLTAGE SOP MULTI PHOTOCOUPLER PS2703-1 FEATURES DESCRIPTION • HIGH ISOLATION VOLTAGE BV: 3.75 k Vr.m.s. MIN NEC's PS2703-1 is an optically coupled isolator containing a GaAs light emitting diode and a NPN silicon phototransistor. This device is mounted in a plastic SOP (Small Out-line Package) for high density applications and has a shield effect to cut off ambient light. • SOP (SMALL OUT-LINE PACKAGE) • ISOLATED CHANNELS PER EACH PACKAGE • HIGH COLLECTOR TO EMITTER VOLTAGE VCEO: 120 V MIN APPLICATIONS • HIGH SPEED SWITCHING tr, tf = 10 µs TYP Interface circuit for various instrumentations and control equipment. • LOW COLLECTOR DARK CURRENT ICEO: 5 nA TYP @ TA = 25 °C, VCE = 40 V • AC LINE/DIGITAL LOGIC • DIGITAL LOGIC INTERFACE • TAPE AND REEL AVAILABLE • TWISTED PAIR LINE RECEIVER • TELEPHONE/TELEGRAPH LINE RECEIVER • HIGH FREQUENCY POWER SUPPLY FEEDBACK CONTROL • RELAY CONTACT MONITOR • POWER SUPPLY MONITOR ELECTRICAL CHARACTERISTICS (TA = 25°C) PART NUMBER Transistor Diode SYMBOLS UNITS K L M TYP MAX 1.1 1.4 Forward Voltage, IF = 5 mA V IR Reverse Current, VR = 5 V µA Ct Terminal Capacitance, V= 0, f = 1.0 MHz pF ICEO Collector to Emitter Dark Current, VCE = 120 V, IF = 0 nA CTR Current Transfer Ratio1, IF= 5 mA, VCE = 5 V % 50 150 IF= 1 mA, VCE = 5 V % 10 80 Collector Saturation Voltage, IF = 10 mA, IC = 2 mA V RI-O Isolation Resistance, Vin-out = 1.0 k VDC Ω CI-o 5 30 100 400 0.3 1011 Isolation Capacitance, V = 0, f = 1.0 MHZ pF 0.4 tr Rise Time2, VCC = 5 V, IC = 2 mA, RL = 1 k Ω µs 10 tf Fall Time2, VCC = 5 V, IC = 2 mA, RL = 1 k Ω µs 10 Notes: 1. CTR rank: CTR Rank MIN VF VCE (sat) Coupled PS2703-1 PARAMETERS 2. Test Circuit for Switching CTR (%) 200 to 400 80 to 100 to 300 25 to 50 to 150 10 to Conditions IF = 5 mA, VCE = 5 V IF = 1 mA, VCE = 5 V IF = 5 mA, VCE = 5 V IF = 1 mA, VCE = 5 V IF = 5 mA, VCE = 5 V IF = 1 mA, VCE = 5 V IF VCC PULSE INPUT 4 3 ( PW = 100 µs Duty Cycle = 1/10 1 ) 4 IF 1 2 50 Ω 2 3 Vout RL = 100 kΩ PS2703-1 California Eastern Laboratories PS2703-1 ABSOLUTE MAXIMUM RATINGS1 (TA = 25°C) SYMBOLS PARAMETERS Diode IF VR PD UNITS RATINGS PS2703-1 Forward Current (DC) mA Reverse Voltage V Power Dissipation mW/Ch Peak Forward Current A (PW = 100 µs, Duty Cycle 1%) IF (PEAK) Transistor Collector to Emitter Voltage VCEO (IC = ImA, IB = 0) VECO Emitter to Collector Voltage (IE = 100µA, IB = 0) IC Collector Current PD Power Dissipation Coupled BV Isolation Voltage2 TSTG Storage Temperature TA Operating Ambient Temperature 50 6 80 1 V 120 V 6 mA/Ch mW/Ch 30 150 Vr.m.s. °C 3750 -55 to +150 °C -55 to +100 Notes: 1. Operation in excess of any one of these parameters may result in permanent damage. 2. AC voltage for 1 minute at TA = 25 °C, RH = 60 % between input and ouput. TYPICAL PERFORMANCE CURVES (TA = 25 °C) TRANSISTOR POWER DISSIPATION vs. AMBIENT TEMPERATURE DIODE POWER DISSIPATION vs. AMBIENT TEMPERATURE 200 Transistor Pwoer Dissipation, PC (mW) Diode Pwoer Dissipation, PD (mW) 100 75 50 25 0 25 50 75 100 150 PS2703-1 1.5 mW/ ˚C 100 50 0 25 50 75 100 Ambient Temperature, TA (°C) Ambient Temperature, TA (°C) FORWARD CURRENT vs. FORWARD VOLTAGE COLLECTOR CURRENT vs. COLLECTOR TO EMITTER VOLTAGE 10 100 5 mA Collector Current, IC (mA) Forward Current, IF (mA) 10 mA TA = 100 ˚C 75 ˚C 50 ˚C 10 25 ˚C 0 ˚C -25 ˚C -55 ˚C 1 0.1 8 4 mA 6 3 mA 4 2 mA 2 1 mA IF = 0.5 mA 0.01 0.8 1 1.2 1.4 Forward Voltage, VF (V) 1.6 0 2 4 6 8 Collector to Emitter Voltage, VCE (V) 10 PS2703-1 TYPICAL PERFORMANCE CURVES (TA = 25 °) COLLECTOR CURRENT vs. COLLECTOR SATURATION VOLTAGE 50000 30 20 10000 Collector Current, IC (mA) Collector to Emitter Dark Current, ICEO (nA) COLLECTOR TO EMITTER DARK CURRENT vs. AMBIENT TEMPERATURE VCE = 40 V 24 V 10 V 1000 100 10 25 mA 5 10 mA 5 mA 2.5 mA 2 mA 2 1.5 mA 1 1 mA 0.5 IF = 0.5 mA 1 0.2 0.1 -60 0.1 -40 -20 0 20 40 60 80 100 0.2 0.4 0.6 0.8 1.0 Ambient Temperature, TA (°C) NORMALIZED OUTPUT CURRENT vs. AMBIENT TEMPERATURE CURRENT TRANSFER RATIO vs. FORWARD CURRENT 300 Current Transfer Ratio, CTR (%) 1.0 0.8 0.6 0.4 0.2 0 -55 0 Collector Saturation Voltage,VCE(sat) (V) 1.2 ∆CTR, Normalized Output Current 10 Normalized to 1.0 at TA = 25 ˚C IF = 5 mA, VCE = 5 V -25 0 25 50 75 VCE = 5 V 250 Sample A 200 Sample B 150 Sample C 100 50 0 0.1 100 0.2 1 0.5 2 5 10 Ambient Temperature, TA (°C ) Forward Current, IF (mA) SWITCHING TIME vs. LOAD RESISTENCE FREQUENCY RESPONSE 100 20 50 VCE = 10 V IC = 2 mA tf 10 Normalized Gain, AV Switching Time, t (µs) 1.0 tr td ts 1 0.1 10 RL = 1 kΩ 510 Ω 300 Ω 100 Ω 0.5 0 100 1000 Load Resistence, RL (Ω) 10000 1 5 10 50 Frequency, f (kHZ) 100 500 PS2703-1 TYPICAL PERFORMANCE CURVES (TA = 25 °) SWITCHING TIME vs. LOAD RESISTENCE CTR DEGRADATION IF = 5 mA, VCC = 5 V, CTR = 90% 1.0 tf 100 ∆CTR, Normalized Switching Time, t (µs) 10000 ts 10 tr td 1 IF = 1 mA, TA = 25 ˚C IF = 5 mA, TA = 25 ˚C IF = 20 mA, TA = 25 ˚C IF = 20 mA, TA = 60 ˚C 0.5 CTR Test condition IF = 5 mA, VCE = 5 V 0.1 1 10 100 0 102 103 104 105 Time, Hr Load Resistence, RL (Ω) OUTLINE DIMENSIONS (Units in mm) PS2703-1 4 PIN CONNECTION (Top View) 3 4 3 1 2 1 Anode Cathode Emitter Collector 2 7.0 ± 0.3 4.4 4.5 MAX 2.0 +0.10 0.15 -0.05 2.3 MAX 0.1 ± 0.1 1. 2. 3. 4. 2.54 1.2 MAX 1.3 0.5 ± 0.3 0.4+0.10 -0.05 Life Support Applications These NEC products are not intended for use in life support devices, appliances, or systems where the malfunction of these products can reasonably be expected to result in personal injury. The customers of CEL using or selling these products for use in such applications do so at their own risk and agree to fully indemnify CEL for all damages resulting from such improper use or sale. 10/14/2003 A Business Partner of NEC Compound Semiconductor Devices, Ltd.