A Business Partner of Renesas Electronics Corporation.
PS2761B-1
Data Sheet
R08DS0106EJ0400
Rev.4.00
Jan 29, 2013
4-PIN SOP PHOTOCOUPLER
OPERATING AMBIENT TEMPERATURE 110°C
DESCRIPTION
The PS2761B-1 is an optically coupled isolator containing a GaAs light emitting diode and an NPN silicon
phototransistor.
This package is mounted in a plastic SOP (Small Outline Package) for high density applications.
The package has shield effect to cut off ambient light.
FEATURES
•
•
•
•
•
•
•
•
Operating ambient temperature: 110°C
Isolation distance (0.4 mm MIN.)
High isolation voltage (BV = 3 750 Vr.m.s.)
SOP (Small Outline Package) type
High-speed switching (tr = 4 μs TYP., tf = 5 μs TYP.)
Ordering number of taping product: PS2761B-1-F3: 3 500 pcs/reel
Pb-Free product
Safety standards
• UL approved: No. E72422
• CSA approved: No. CA 101391 (CA5A, CAN/CSA-C22.2 60065, 60950)
• BSI approved (BS EN 60065, BS EN 60950)
• SEMKO, NEMKO, DEMKO, FIMCO approved (EN 60065, EN 60950)
• CQC approved (GB8898, GB4943)
• DIN EN 60747-5-5 (VDE 0884-5) approved (Option)
PIN CONNECTION
(Top View)
4
1
3
2
1. Anode
2. Cathode
3. Emitter
4. Collector
APPLICATIONS
• Power supply
• Hybrid IC
• Programmable logic controllers
The mark shows major revised points.
The revised points can be easily searched by copying an "" in the PDF file and specifying it in the "Find what:" field.
R08DS0106EJ0400 Rev.4.00
Jan 29, 2013
Page 1 of 13
A Business Partner of Renesas Electronics Corporation.
PS2761B-1
PACKAGE DIMENSIONS (UNIT: mm)
4±0.5
3
1
2
7.0±0.3
4.4
0.1±0.1
2.1±0.2
0.15 +0.10
–0.05
4
2.54
0.5±0.3
0.4 +0.10
–0.05
0.25 M
PHOTOCOUPLER CONSTRUCTION
Parameter
Air Distance (MIN.)
Outer Creepage Distance (MIN.)
Isolation Distance (MIN.)
R08DS0106EJ0400 Rev.4.00
Jan 29, 2013
PS2761B-1
5 mm
5 mm
0.4 mm
Page 2 of 13
A Business Partner of Renesas Electronics Corporation.
PS2761B-1
MARKING EXAMPLE
No. 1 pin Mark
*1
Company initial
Type Number
R
761B
N301
Assembly Lot
*2
N
3
01
Week Assembled
Year Assembled
(Last 1 Digit)
CTR Rank Code
Remark "PS2" and "-1" are omitted from original type number
Note: Bar indication contents of *1 and *2.
Made in Taiwan
*1: No indication
*2: No indication
Made in Taiwan
Halogen free
*1: " " (Horizontal bar)
*2: No indication
R
761B
N301
R
761B
N301
"
" (Horizontal bar)
:Made in Taiwan & Halogen free
"
" (Vertical bar)
:Made in Japan
"
" (Horizontal bar)
Made in Japan
*1: No indication
*2: " " (Vertical bar)
Made in Japan
Halogen free
*1: No indication
*2: " " (Horizontal bar)
R
761B
N301
R
761B
N301
:Made in Japan & Halogen free
R08DS0106EJ0400 Rev.4.00
Jan 29, 2013
Page 3 of 13
A Business Partner of Renesas Electronics Corporation.
PS2761B-1
ORDERING INFORMATION
Part Number
Order Number
PS2761B-1-F3
PS2761B-1-F3-A
PS2761B-1-V-F3
PS2761B-1-V-F3-A
PS2761B-1-F3
PS2761B-1Y-F3-A
PS2761B-1-V-F3
PS2761B-1Y-V-F3-A
Note:
Solder Plating
Specification
Pb-Free
Special version
(Pb-Free and
Halogen Free)
Packing Style
Safety Standard
Approval
Embossed Tape
3 500 pcs/reel
Standard products
(UL, CSA, BSI,
SEMKO, NEMKO,
DEMKO, FIMKO,
CQC approved)
Embossed Tape
3 500 pcs/reel
DIN EN 60747-5-5
(VDE 0884-5)
Approved (Option)
Embossed Tape
3 500 pcs/reel
Standard products
(UL, CSA, BSI,
SEMKO, NEMKO,
DEMKO, FIMKO,
CQC approved)
Embossed Tape
3 500 pcs/reel
DIN EN 60747-5-5
(VDE 0884-5)
Approved (Option)
Application
Part Number*1
PS2761B-1
PS2761B-1
*1. For the application of the Safety Standard, following part number should be used.
ABSOLUTE MAXIMUM RATINGS (TA = 25°C, unless otherwise specified)
Parameter
Symbol
Ratings
Unit
Forward Current (DC)
IF
50
mA
Reverse Voltage
VR
6
V
ΔPD/°C
0.8
mW/°C
PD
80
mW
IFP
1.0
A
Collector to Emitter Voltage
VCEO
70
V
Emitter to Collector Voltage
VECO
5
V
IC
50
mA
ΔPC/°C
1.5
mW/°C
PC
150
mW
BV
3 750
Vr.m.s.
Operating Ambient Temperature
TA
–55 to +110
°C
Storage Temperature
Tstg
–55 to +150
°C
Diode
Power Dissipation Derating
Power Dissipation
Peak Forward Current
Transistor
*1
Collector Current
Power Dissipation Derating
Power Dissipation
Isolation Voltage
Note:
*2
*1. PW = 100 μs, Duty Cycle = 1%
*2. AC voltage for 1 minute at TA = 25°C, RH = 60% between input and output.
Pins 1-2 shorted together, 3-4 shorted together.
R08DS0106EJ0400 Rev.4.00
Jan 29, 2013
Page 4 of 13
A Business Partner of Renesas Electronics Corporation.
PS2761B-1
ELECTRICAL CHARACTERISTICS (TA = 25°C)
Parameter
Forward Voltage
Reverse Current
Diode
Symbol
VF
IR
Terminal
Capacitance
Collector to Emitter
Dark Current
ICEO
Coupled
Current Transfer
*1
Ratio (IC/IF)
CTR
Note:
100
IF = 1 mA, VCE = 5 V
10
50
RI-O
VI-O = 1 kVDC
Isolation
Capacitance
CI-O
V = 0 V, f = 1 MHz
Rise Time*2
tr
1011
VCC = 5 V, IC = 2 mA, RL = 100 Ω
Unit
V
μA
pF
IF = 10 mA, IC = 2 mA
100
nA
400
%
0.3
V
Ω
0.4
pF
4
μs
tf
5
*2
ton
8
*2
toff
5
Turn-off Time
50
Isolation Resistance
Turn-on Time
MAX.
1.4
5
15
IF = 5 mA, VCE = 5 V
VCE (sat)
Fall Time
TYP.
1.1
IF = 0 mA, VCE = 24 V
Collector Saturation
Voltage
*2
MIN.
V = 0 V, f = 1 MHz
Ct
Transistor
Conditions
IF = 5 mA
VR = 5 V
*1. CTR rank
CTR rank
K
L
M
N
CTR (%)
Conditions
200 to 400
IF = 5 mA, VCE = 5 V
40 and larger
IF = 1 mA, VCE = 5 V
100 to 300
IF = 5 mA, VCE = 5 V
20 and larger
IF = 1 mA, VCE = 5 V
50 to 150
IF = 5 mA, VCE = 5 V
10 and larger
IF = 1 mA, VCE = 5 V
50 to 400
IF = 5 mA, VCE = 5 V
10 and larger
IF = 1 mA, VCE = 5 V
*2. Test Circuit for Switching Time
Pulse Input
VCC
PW = 100 μ s
Duty cycle = 1/10
Input
ton
IF
td
In monitor
toff
ts
VOUT
50 Ω
RL = 100 Ω
90%
Output
10%
tr
R08DS0106EJ0400 Rev.4.00
Jan 29, 2013
tf
Page 5 of 13
A Business Partner of Renesas Electronics Corporation.
PS2761B-1
TYPICAL CHARACTERISTICS (TA = 25°C, unless otherwise specified)
TRANSISTOR POWER DISSIPATION vs.
AMBIENT TEMPERATURE
DIODE POWER DISSIPATION vs.
AMBIENT TEMPERATURE
Transistor Power Dissipation PC (mW)
Diode Power Dissipation PD (mW)
100
0.8 mW/°C
80
60
40
20
0
25
50
100110 125
75
120
90
60
30
50
100110 125
75
150
FORWARD CURRENT vs.
FORWARD VOLTAGE
COLLECTOR CURRENT vs.
COLLECTOR TO EMITTER VOLTAGE
30
TA = +100°C
+60°C
+25°C
5
0°C
–25°C
–55°C
1
0.5
IF = 10 mA
25
20
15
5 mA
10
2 mA
5
1 mA
0.8
0.9
1.0
1.1
1.2
1.3
1.4
1.5
0
Forward Voltage VF (V)
2
4
6
8
10
Collector to Emitter Voltage VCE (V)
COLLECTOR TO EMITTER DARK
CURRENT vs. AMBIENT TEMPERATURE
COLLECTOR CURRENT vs.
COLLECTOR SATURATION VOLTAGE
10 000
10
IF = 10 mA
5 mA
1 000
Collector Current IC (mA)
Collector to Emitter Dark Current ICEO (nA)
25
Ambient Temperature TA (°C)
Collector Current IC (mA)
Forward Current IF (mA)
150
Ambient Temperature TA (°C)
10
0.1
0.05
0.7
1.5 mW/°C
180
0
150
100
50
210
VCE = 24 V
70 V
100
10
1
0.1
0
20
40
60
80
100
120
Ambient Temperature TA (°C)
2 mA
1 mA
1
0.1
0
0.2
0.4
0.6
0.8
1.0
Collector Saturation Voltage VCE (sat) (V)
Remark The graphs indicate nominal characteristics.
R08DS0106EJ0400 Rev.4.00
Jan 29, 2013
Page 6 of 13
A Business Partner of Renesas Electronics Corporation.
PS2761B-1
1.2
1.0
CTR@100%
0.8
0.6
210%
0.4
Normalized to 1.0
0.2 at TA = 25°C,
IF = 1 mA, VCE = 5 V
0
–60 –40 –20 0
20
100
Switching Time t ( μ s)
Normalized Current Transfer Ratio CTR
1.4
40
NORMALIZED CURRENT TRANSFER
RATIO vs. AMBIENT TEMPERATURE
60
80 100 120
1.4
1.2
1.0
CTR@100%
0.8
210%
0.6
0.4
Normalized to 1.0
0.2 at TA = 25°C,
IF = 5 mA, VCE = 5 V
0
–60 –40 –20 0
20
40
60
80 100 120
Ambient Temperature TA (°C)
Ambient Temperature TA (°C)
SWITCHING TIME vs.
LOAD RESISTANCE
SWITCHING TIME vs.
LOAD RESISTANCE
1 000
IC = 2 mA, VCC = 5 V,
CTR = 236%
IF = 5 mA, VCC = 5 V,
CTR = 236%
tf
tr
Switching Time t ( μ s)
Normalized Current Transfer Ratio CTR
NORMALIZED CURRENT TRANSFER
RATIO vs. AMBIENT TEMPERATURE
10
td
ts
1
tf
100
ts
10
tr
0.1
10
100
1 000
td
1
1
10 000
10
Load Resistance RL (Ω)
Load Resistance RL (kΩ)
CURRENT TRANSFER RATIO vs.
FORWARD CURRENT
FREQUENCY RESPONSE
5
VCE = 5 V,
n=3
0
200
150
Normalized Gain GV
Current Transfer Ratio CTR (%)
250
100
Sample A
B
C
100
50
0
0.01
–5
100 Ω
–10
300 Ω
–15
RL = 1 kΩ
–20
IF = 5 mA,
VCE = 5 V
0.1
1
10
100
Forward Current IF (mA)
–25
0.1
1
10
100
1 000
Frequency f (kHz)
Remark The graphs indicate nominal characteristics.
R08DS0106EJ0400 Rev.4.00
Jan 29, 2013
Page 7 of 13
A Business Partner of Renesas Electronics Corporation.
PS2761B-1
TAPING SPECIFICATIONS (UNIT: mm)
1.55±0.1
2.9 MAX.
7.4±0.1
5.5±0.05
1.5+0.1
–0
12.0±0.2
2.0±0.05
4.0±0.1
1.75±0.1
Outline and Dimensions (Tape)
2.4±0.1
4.6±0.1
0.3
8.0±0.1
Tape Direction
PS2761B-1-F3
Outline and Dimensions (Reel)
φ 21.0±0.8
φ 13.0±0.2
R 1.0
φ 100±1.0
2.0±0.5
φ13.0±0.2
φ 330±2.0
2.0±0.5
13.5±1.0
17.5±1.0
Packing: 3 500 pcs/reel
R08DS0106EJ0400 Rev.4.00
Jan 29, 2013
11.9 to 15.4
Outer edge of
flange
Page 8 of 13
A Business Partner of Renesas Electronics Corporation.
PS2761B-1
RECOMMENDED MOUNT PAD DIMENSIONS (UNIT: mm)
2.54
0.8
1.45
6.25
Remark All dimensions in this figure must be evaluated before use.
R08DS0106EJ0400 Rev.4.00
Jan 29, 2013
Page 9 of 13
A Business Partner of Renesas Electronics Corporation.
PS2761B-1
NOTES ON HANDLING
1. Recommended soldering conditions
(1) Infrared reflow soldering
• Peak reflow temperature
• Time of peak reflow temperature
• Time of temperature higher than 220°C
• Time to preheat temperature from 120 to 180°C
• Number of reflows
• Flux
260°C or below (package surface temperature)
10 seconds or less
60 seconds or less
120±30 s
Three
Rosin flux containing small amount of chlorine (The flux
with a maximum chlorine content of 0.2 Wt% is
recommended.)
Package Surface Temperature T (°C)
Recommended Temperature Profile of Infrared Reflow
(heating)
to 10 s
260°C MAX.
220°C
to 60 s
180°C
120°C
120±30 s
(preheating)
Time (s)
(2) Wave soldering
• Temperature
• Time
• Preheating conditions
• Number of times
• Flux
260°C or below (molten solder temperature)
10 seconds or less
120°C or below (package surface temperature)
One (Allowed to be dipped in solder including plastic mold portion.)
Rosin flux containing small amount of chlorine (The flux with a maximum chlorine
content of 0.2 Wt% is recommended.)
(3) Soldering by Soldering Iron
• Peak Temperature (lead part temperature) 350°C or below
• Time (each pins)
3 seconds or less
• Flux
Rosin flux containing small amount of chlorine (The flux with a
maximum chlorine content of 0.2 Wt% is recommended.)
(a) Soldering of leads should be made at the point 1.5 to 2.0 mm from the root of the lead
(4) Cautions
• Fluxes
Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent.
R08DS0106EJ0400 Rev.4.00
Jan 29, 2013
Page 10 of 13
A Business Partner of Renesas Electronics Corporation.
PS2761B-1
2. Cautions regarding noise
Be aware that when voltage is applied suddenly between the photocoupler’s input and output or between collectoremitters at startup, the output transistor may enter the on state, even if the voltage is within the absolute maximum
ratings.
3. Measurement conditions of current transfer ratios (CTR), which differ according to photocoupler
Check the setting values before use, since the forward current conditions at CTR measurement differ according to
product.
When using products other than at the specified forward current, the characteristics curves may differ from the
standard curves due to CTR value variations or the like. Therefore, check the characteristics under the actual
operating conditions and thoroughly take variations or the like into consideration before use.
USAGE CAUTIONS
1. Protect against static electricity when handling.
2. Avoid storage at a high temperature and high humidity.
R08DS0106EJ0400 Rev.4.00
Jan 29, 2013
Page 11 of 13
A Business Partner of Renesas Electronics Corporation.
PS2761B-1
SPECIFICATION OF VDE MARKS LICENSE DOCUMENT
Parameter
Symbol
Climatic test class (IEC 60068-1/DIN EN 60068-1)
Dielectric strength
maximum operating isolation voltage
Test voltage (partial discharge test, procedure a for type test and
random test)
Upr = 1.6 × UIORM, Pd < 5 pC
Spec.
Unit
55/110/21
UIORM
Upr
707
1 131
Vpeak
Vpeak
Test voltage (partial discharge test, procedure b for all devices)
Upr = 1.875 × UIORM, Pd < 5 pC
Upr
1 325
Vpeak
Highest permissible overvoltage
UTR
6 000
Vpeak
Degree of pollution (DIN EN 60664-1 VDE0110 Part 1)
Comparative tracking index (IEC 60112/DIN EN 60112 (VDE 0303
Part 11))
2
CTI
Material group (DIN EN 60664-1 VDE0110 Part 1)
175
III a
Storage temperature range
Tstg
–55 to +150
°C
Operating temperature range
TA
–55 to +110
°C
Ris MIN.
Ris MIN.
1012
11
10
Ω
Ω
Tsi
Isi
Psi
150
300
500
°C
mA
mW
Ris MIN.
109
Ω
Isolation resistance, minimum value
VIO = 500 V dc at TA = 25°C
VIO = 500 V dc at TA MAX. at least 100°C
Safety maximum ratings (maximum permissible in case of fault, see
thermal derating curve)
Package temperature
Current (input current IF, Psi = 0)
Power (output or total power dissipation)
Isolation resistance
VIO = 500 V dc at TA = Tsi
R08DS0106EJ0400 Rev.4.00
Jan 29, 2013
Page 12 of 13
A Business Partner of Renesas Electronics Corporation.
PS2761B-1
Caution
GaAs Products
This product uses gallium arsenide (GaAs).
GaAs vapor and powder are hazardous to human health if inhaled or ingested, so please observe
the following points.
• Follow related laws and ordinances when disposing of the product. If there are no applicable laws
and/or ordinances, dispose of the product as recommended below.
1. Commission a disposal company able to (with a license to) collect, transport and dispose of
materials that contain arsenic and other such industrial waste materials.
2. Exclude the product from general industrial waste and household garbage, and ensure that the
product is controlled (as industrial waste subject to special control) up until final disposal.
• Do not burn, destroy, cut, crush, or chemically dissolve the product.
• Do not lick the product or in any way allow it to enter the mouth.
R08DS0106EJ0400 Rev.4.00
Jan 29, 2013
Page 13 of 13
Revision History
Rev.
1.00
4.00
Date
Dec 5, 2006
Jan 29, 2013
PS2761B-1 Data Sheet
Description
Summary
Page
−
Throughout
p.1
p.2
p.3
p.4
This data sheet was released as PN10651EJ01V0DS
Renesas format is applied to this data sheet.
The safety standards are revised.
The explanation in MARKING EXAMPLE is moved to p.3.
The explanation in MARKING EXAMPLE is revised.
ORDERING INFORMATION is modified with the revision of the safety
standards.
The value in Ratings of Parameter “Forward Current (DC)” is changed from 25
to 50.
The value in Ratings of Parameter “Collector Current” is changed from 40 to
50.
p.5
Turn-on Time (ton) and Turn-off Time(toff) are added to the table in
ELECTRICAL CHARACTERISTICS.
p.10
The note about temperature condition of the recommended soldering
conditions is deleted.
p.12
The values of Upr is changed from 1060 to 1131 and the factor of UIORM is
changed from 1.5 to 1.6.
-- “Clearance distance” and “Creepage distance” are deleted form table.
All trademarks and registered trademarks are the property of their respective owners.
C-1
NOTICE
1.
Descriptions of circuits, software and other related information in this document are provided only to illustrate the operation of semiconductor products and
application examples. You are fully responsible for the incorporation of these circuits, software, and information in the design of your equipment. California
Eastern Laboratories and Renesas Electronics assumes no responsibility for any losses incurred by you or third parties arising from the use of these circuits,
software, or information.
2.
California Eastern Laboratories has used reasonable care in preparing the information included in this document, but California Eastern Laboratories does
not warrant that such information is error free. California Eastern Laboratories and Renesas Electronics assumes no liability whatsoever for any damages
incurred by you resulting from errors in or omissions from the information included herein.
3.
California Eastern Laboratories and Renesas Electronics do not assume any liability for infringement of patents, copyrights, or other intellectual property
rights of third parties by or arising from the use of Renesas Electronics products or technical information described in this document. No license, express,
implied or otherwise, is granted hereby under any patents, copyrights or other intellectual property rights of California Eastern Laboratories or Renesas
Electronics or others.
4.
You should not alter, modify, copy, or otherwise misappropriate any Renesas Electronics product, whether in whole or in part. California Eastern
Laboratories and Renesas Electronics assume no responsibility for any losses incurred by you or third parties arising from such alteration, modification, copy
or otherwise misappropriation of Renesas Electronics product.
5.
Renesas Electronics products are classified according to the following two quality grades: “Standard” and “High Quality”. The recommended applications
for each Renesas Electronics product depends on the product’s quality grade, as indicated below. “Standard”: Computers; office equipment; communications
equipment; test and measurement equipment; audio and visual equipment; home electronic appliances; machine tools; personal electronic equipment; and
industrial robots etc. “High Quality”: Transportation equipment (automobiles, trains, ships, etc.); traffic control systems; anti-disaster systems; anti-crime
systems; and safety equipment etc. Renesas Electronics products are neither intended nor authorized for use in products or systems that may pose a direct
threat to human life or bodily injury (artificial life support devices or systems, surgical implantations etc.), or may cause serious property damages (nuclear
reactor control systems, military equipment etc.). You must check the quality grade of each Renesas Electronics product before using it in a particular
application. You may not use any Renesas Electronics product for any application for which it is not intended. California Eastern Laboratories and Renesas
Electronics shall not be in any way liable for any damages or losses incurred by you or third parties arising from the use of any Renesas Electronics product
for which the product is not intended by California Eastern Laboratories or Renesas Electronics.
6.
You should use the Renesas Electronics products described in this document within the range specified by California Eastern Laboratories, especially with
respect to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation characteristics, installation and other product
characteristics. California Eastern Laboratories shall have no liability for malfunctions or damages arising out of the use of Renesas Electronics products
beyond such specified ranges.
7.
Although Renesas Electronics endeavors to improve the quality and reliability of its products, semiconductor products have specific characteristics such as
the occurrence of failure at a certain rate and malfunctions under certain use conditions. Further, Renesas Electronics products are not subject to radiation
resistance design. Please be sure to implement safety measures to guard them against the possibility of physical injury, and injury or damage caused by
fire in the event of the failure of a Renesas Electronics product, such as safety design for hardware and software including but not limited to redundancy,
fire control and malfunction prevention, appropriate treatment for aging degradation or any other appropriate measures. Because the evaluation of
microcomputer software alone is very difficult, please evaluate the safety of the final products or systems manufactured by you.
Please contact a California Eastern Laboratories sales office for details as to environmental matters such as the environmental compatibility of each Renesas
8.
Electronics product. Please use Renesas Electronics products in compliance with all applicable laws and regulations that regulate the inclusion or use of
controlled substances, including without limitation, the EU RoHS Directive. California Eastern Laboratories and Renesas Electronics assume no liability for
damages or losses occurring as a result of your noncompliance with applicable laws and regulations.
9.
Renesas Electronics products and technology may not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited
under any applicable domestic or foreign laws or regulations. You should not use Renesas Electronics products or technology described in this document
for any purpose relating to military applications or use by the military, including but not limited to the development of weapons of mass destruction. When
exporting the Renesas Electronics products or technology described in this document, you should comply with the applicable export control laws and
regulations and follow the procedures required by such laws and regulations.
10. It is the responsibility of the buyer or distributor of California Eastern Laboratories, who distributes, disposes of, or otherwise places the Renesas Electronics
product with a third party, to notify such third party in advance of the contents and conditions set forth in this document, California Eastern Laboratories and
Renesas Electronics assume no responsibility for any losses incurred by you or third parties as a result of unauthorized use of Renesas Electronics products.
11. This document may not be reproduced or duplicated in any form, in whole or in part, without prior written consent of California Eastern Laboratories.
12. Please contact a California Eastern Laboratories sales office if you have any questions regarding the information contained in this document or Renesas
Electronics products, or if you have any other inquiries.
NOTE 1: “Renesas Electronics” as used in this document means Renesas Electronics Corporation and also includes its majority-owned subsidiaries.
NOTE 2: “Renesas Electronics product(s)” means any product developed or manufactured by or for Renesas Electronics.
NOTE 3: Products and product information are subject to change without notice.
CEL Headquarters • 4590 Patrick Henry Drive, Santa Clara, CA 95054 • Phone (408) 919-2500 • www.cel.com
For a complete list of sales offices, representatives and distributors,
Please visit our website: www.cel.com/contactus