PS9613L-E3-A

NEC's 1 Mbps, OPEN-COLLECTOR OUTPUT FOR GATE DRIVE INTERFACE PS9613 INTELLIGENT POWER MODULE PS9613L 8-PIN DIP PHOTOCOUPLER FEATURES DESCRIPTION • HIGH INSTANTANEOUS COMMON MODE REJECTION VOLTAGE CMH, CML = ±15 kV/µs MIN NEC's PS9613 and PS9613L are optically coupled isolator containing a GaAIAs LED on the input side and a photo diode and a signal processing circuit on the output side on one chip. • HIGH SPEED RESPONSE tPHL= 500 ns MAX, tPLH = 750 ns MAX The PS9613 is in a plastic DIP (Dual In-line Package) and the PS9613L is lead bending type (Gull-wing) for surface mounting. • MAXIMUM PROPAGATION DELAYS tPHL- tPLH = 270 ns TYP • PULSE WIDTH DISTORTION | tPHL- tPLH | = 270 ns TYP APPLICATIONS • TAPING PRODUCT NUMBER PS9613L-E3, E4: 1000 pcs/reel • IPM DRIVER • GENERAL PURPOSE INVERTER ESD SENSITIVE ELECTRICAL CHARACTERISTICS1 (TA = -40 to +100°C, VCC = 15 V, unless otherwise specified) PART NUMBER Coupled Detector Diode SYMBOL PARAMETERS PS9613, PS9613L UNITS MIN TYP 1.3 1.65 MAX VF Forward Voltage, IF = 10 mA V IR Reverse Current, VR = 3 V µA 2.1 Ct Terminal Capacitance, V = 0, f = 1 MHz, TA = 25 ºC pF 30 VOL Low Level Output Voltage IF = 10 mA, Vcc = 5 V, IO = 2.4 mA V 0.13 0.6 IOH High Level Output Current Vcc = 30 V, VF = 0.8 V µA 1.0 50 ICCH High Level Supply Current, VCC = 30 V, VF = 0.8 V, V0 = open mA 0.6 1.3 ICCL Low Level Supply Current, VCC = 30 V, IF = 10 mA, V0 = open mA 0.6 1.3 IFHL Threshhold Input Current (High→ Low), VO = 0.8 V, Io = 0.75 V mA 1.5 5.0 CTR Current Transfer Ratio, IF = 10 mA, Vo = 0.6 V 200 % 44 1011 110 RI-O Isolation Resistance, VI-O = 1 k VDC, RH = 40 to 60%, TA = 25 ºC Ω CI-O Isolation Capacitance, V = 0, f = 1 MHz, TA = 25 ºC pF 0.6 tPHL Propagation Delay Time2, High → Low IF = 10 mA, RL = 20 kΩ, CL = 100 pF, VTHHL = 1.5 V, VTHLH = 2.0 V ns 250 500 tPLH Propagation Delay Time2, High → Low IF = 10 mA, RL = 20 kΩ, CL = 100 pF, VTHHL = 1.5 V, VTHLH = 2.0 V ns 520 750 tPLH-tPHL Maximum Propagation Delays IF = 10 mA, RL = 20 kΩ, CL = 100 pF, VTHHL = 1.5 V, VTHLH = 2.0 V ns 270 650 | tPHL-tPLH | Pulse Width Distortion IF = 10 mA, RL = 20 kΩ, CL = 100 pF, VTHHL = 1.5 V, VTHLH = 2.0 V ns 270 650 -200 CMH Instantaneous Common Mode Rejection Voltage (Output:High)3 TA = 25°C, IF = 0 mA,VO > = 3.0 V, VCM = 1.5 kV, RL = 20 Ω, CL = 100 pF kV/µs 15 CML Instantaneous Common Mode Rejection Voltage (Output:High)3 TA = 25°C, IF = 10 mA,VO