5KP7.5APT

CHENMKO ENTERPRISE CO.,LTD GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR V OLTAGE-5.0 TO 110 VOLTS 5000 WATTS PEAK POWER 8.0 WATTS STEADY STATE FEATURES * * * * * * Plastic package 5000W surge capability at 1ms Glass passivated chip junction in P-6 Package Excellent clamping capability Low Zener lmpedance Fast response time: typically less than 1.0ps from 0 volts to BV min. * Typical IR less than 1 uA above 10V * High temperature soldering guaranteed: 300 degree C/10seconds/.375"(9.5mm) lead length/51 bs., (2.3k) tension 5KP SERIES P-6 0.052(1.3) DIA. 0.048(1.2) 1.0(25.4) MIN. MECHANICAL DATA Case: JEDEC P-6 molded plastic Terminals: Plated axial leads, solderable per MIL-STD-750, Method 2026 Polarity: Color band denotes cathode end Mounting Position: Any Weight: 0.007 ounce, 2.1 grams 0.360(9.1) 0.340(8.6) 0.360(9.1) DIA. 0.340(8.6) 1.0(25.4) MIN. MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25oC ambient temperature unless otherwise specified. Single phase, half wave, 60 HZ, resistive or inductive load. For capacitive load, derate current by 20%. Dimensions in inches and (millimeters) P-6 DEVICES FOR BIDIRECTIONAL APPLICATIONS For Bidirectional use C or CA Suffix for types 5KP5.0 thru types 5KP110 Electrical characteristics apply in both directions. MAXIMUM RATINGES ( At TA = 25oC unless otherwise noted ) RATINGS SYMBOL VALUE UNITS Peak Power Dissipation at TA = 25oC, Tp = 1ms ( Note1 ) PPK Minimum 5000 Watts Steady State Power Dissipation at TL = 75oC Lead Lengths .375" (9.5mm) Peak Forward Surge Current 8.3ms Single Half Sine-Wave Superimposed on Rated Load ( Note 2 ) PD 8.0 Watts IFSM 400 Amps Operating and Storage Temperature Range TJ, TSTG -55 to +175 o C NOTES : 1. Non-repetitive current pulse, per Fig. 3 and derated above TA = 25oC per Fig. 2. 2. 8.3ms single half sine-wave, duty cycle = 4 pulses per minute maximum. 2001-6 Breakdown Voltage PRODUCT NO. VBR Volts ( NOTE 1 ) MIN. 5KP5.0PT 5KP5.0APT 5KP6.0PT 5KP6.0APT 5KP6.5PT 5KP6.5APT 5KP7.0PT 5KP7.0APT 5KP7.5PT 5KP7.5APT 5KP8.0PT 5KP8.0APT 5KP8.5PT 5KP8.5APT 5KP9.0PT 5KP9.0APT 5KP10PT 5KP10APT 5KP11PT 5KP11APT 5KP12PT 5KP12APT 5KP13PT 5KP13APT 5KP14PT 5KP14APT 5KP15PT 5KP15APT 5KP16PT 5KP16APT 5KP17PT 5KP17APT 5KP18PT 5KP18APT 5KP20PT 5KP20APT 5KP22PT 5KP22APT 5KP24PT 5KP24APT 5KP26PT 5KP26APT 5KP28PT 5KP28APT 5KP30PT 6.40 6.40 6.67 6.67 7.22 7.22 7.78 7.78 8.33 8.33 8.89 8.89 9.44 9.44 10.0 10.0 11.1 11.1 12.2 12.2 13.3 13.3 14.4 14.4 15.6 15.6 16.7 16.7 17.8 17.8 18.9 18.9 20.0 20.0 22.2 22.2 24.4 24.4 26.7 26.7 28.9 28.9 31.1 31.1 33.3 MAX. 7.30 7.00 8.15 7.37 8.82 7.98 9.51 8.60 10.2 9.21 10.9 8.83 11.5 10.4 12.2 11.1 13.6 12.3 14.9 13.5 16.3 14.7 17.6 15.9 19.1 17.2 20.4 18.5 21.8 19.7 23.1 20.9 24.4 22.1 27.1 24.5 29.8 26.9 32.6 29.5 35.3 31.9 38.0 34.4 40.7 50 50 50 50 50 50 50 50 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 @ IT ( mA ) Working Peak Reverse Voltage Maximum Reverse Leakage at Vrwm Maximum Reverse Current ( NOTE 2 ) Maximum Reverse Voltage at Irsm ( clamping ) Vrsm ( V ) 9.6 9.2 11.4 10.3 12.3 11.2 13.3 12.0 14.3 12.9 15.0 13.6 15.9 14.4 16.9 15.4 18.8 17.0 20.1 18.2 22.0 19.9 23.8 21.5 25.8 23.2 26.9 24.4 28.8 28.8 30.5 27.6 32.2 29.2 35.8 32.4 39.4 35.5 43.0 38.9 46.6 42.1 50.1 45.4 53.5 Maximum Temperature Coefficient of Vbr Vrwm ( V ) 5.0 5.0 6.0 6.0 6.5 6.5 7.0 7.0 7.5 7.5 8.0 8.0 8.5 8.5 9.0 9.0 10.0 10.0 11.0 11.0 12.0 12.0 13.0 13.0 14.0 14.0 15.0 15.0 16.0 16.0 17.0 17.0 18.0 18.0 20.0 20.0 22.0 22.0 24.0 24.0 26.0 26.0 28.0 28.0 30.0 Ir ( uA ) 2000 2000 5000 5000 2000 2000 1000 1000 250 250 150 150 50.0 50.0 20.0 20.0 15.0 15.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 Irsm ( A ) 520 543 439 485 407 447 378 417 350 388 333 367 314 347 295 325 266 294 249 274 227 251 210 232 194 215 188 206 176 176 164 161 155 172 139 154 127 141 116 128 107 119 99 110 93 ( %C ) 0.057 0.057 0.061 0.061 0.065 0.065 0.068 0.068 0.073 0.073 0.075 0.075 0.078 0.078 0.081 0.081 0.084 0.084 0.086 0.086 0.088 0.088 0.090 0.090 0.092 0.092 0.094 0.094 0.096 0.096 0.097 0.097 0.098 0.098 0.099 0.099 0.100 0.100 0.101 0.101 0.101 0.101 0.102 0.102 0.103 Breakdown Voltage PRODUCT NO. VBR Volts ( NOTE 1 ) MIN. 5KP30APT 5KP33PT 5KP33APT 5KP36PT 5KP36APT 5KP40PT 5KP40APT 5KP43PT 5KP43APT 5KP45PT 5KP45APT 5KP48PT 5KP48APT 5KP51PT 5KP51APT 5KP54PT 5KP54APT 5KP58PT 5KP58APT 5KP60PT 5KP60APT 5KP64PT 5KP64APT 5KP70PT 5KP70APT 5KP75PT 5KP75APT 5KP78PT 5KP78APT 5KP85PT 5KP85APT 5KP90PT 5KP90APT 5KP100PT 5KP100APT 5KP110PT 5KP110APT 33.3 36.7 36.7 40.0 40.0 44.4 44.4 47.8 47.8 50.0 50.0 53.3 53.3 56.1 56.7 60.0 60.0 64.4 64.4 66.7 66.7 71.7 71.1 77.6 77.8 83.3 83.3 86.7 86.7 94.9 94.9 100 100 111 111 122 122 MAX. 36.8 44.9 40.6 48.9 44.2 54.3 49.1 58.4 52.8 61.1 55.3 65.2 58.9 69.3 62.7 73.3 66.3 78.7 71.2 81.5 73.7 96.9 78.6 95.1 86.0 102 92.1 106.0 95.8 115 104 122 111 136 123 149 135 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 @ IT ( mA ) Working Peak Reverse Voltage Maximum Reverse Leakage at Vrwm Maximum Reverse Current ( NOTE 2 ) Maximum Reverse Voltage at Irsm ( clamping ) Vrsm ( V ) 48.4 59.0 53.3 64.3 58.1 71.4 64.5 76.7 69.4 80.3 72.7 85.5 77.4 91.1 82.4 96.3 87.1 103 94 107 97 114 103 125 113 134 121 126 126 151 137 160 146 179 162 196 177 Maximum Temperature Coefficient of Vbr Vrwm ( V ) 30.0 33.0 33.0 36.0 36.0 40.0 40.0 43.0 43.0 45.0 45.0 48.0 48.0 51.0 51.0 54.0 54.0 58.0 58.0 60.0 60.0 64.0 64.0 70.0 70.0 75.0 75.0 78.0 78.0 85.0 85.0 90.0 90.0 100 100 110 110 Ir ( uA ) 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 Irsm ( A ) 103 85 94 78 85 70 78 65 72 62 69 58 65 55 61 52 57 49 53 47 52 44 49 40 44 37 41 36 40 33 36 31 34 28 31 26 28 ( %C ) 0.103 0.104 0.104 0.104 0.104 0.105 0.105 0.105 0.105 0.106 0.106 0.106 0.106 0.107 0.107 0.107 0.107 0.107 0.107 0.108 0.108 0.108 0.108 0.108 0.108 0.108 0.108 0.108 0.108 0.108 0.110 0.110 0.110 0.110 0.110 0.112 0.112 NOTES : 1. Vbr measured after IT applied for 300 us. IT = Square Wave Pulse or equivalent. 2. Surge Current Waveform per Figure 3 and Derated per Figure 2. 3. Vf = 3.5 V max. at If= 100 A for all types on 1/2 Square or equivalent Sine Wave. PW = 8.3 ms, Duty Cycle = 4 Pulses per minute maximum. RATING CHARACTERISTIC CURVES ( 5KP5.0PT ~ 5KP110APT ) P EAK PULSE POWER (P PP ) OR CURRENT FIG. 1 - PEAK PULSE POWER RATING CURVE P PPM , PEAK PULSE POWER, kW 100 Non-Repetitive Pulse Waveform Shown in Fig.3 T A = 2 5 OC FIG. 2 - PULSE DERATING CURVE ( I PP ) DERATING IN PERCENTAGE,% 100 75 10 50 1.0 25 0.1 0.1uS 0 0 25 50 75 100 125 150 175 200 T A , AMBIENT TEMPERATURE,( OC ) 1.0uS 10uS 100uS 1.0mS 10mS T P , PULSE WIDTH, sec FIG. 3 - PULSE WAVEFORM 150 tr = 10usec. Pulse Width (td) is Defined as the Point Where the Peak Current Decays to 50% of I PPM FIG. 4 - TYPICAL JUNCTION CAPACITANCE 100000 f = 1.0 MHz Vsig = 50mVp-p T J = 2 5 OC I PPM , PEAK PULSE CURRENT,% C J , CAPACITANCE, pF Peak Value I PPM Measured at Zero Bias 100 I PPM HALF VALUE 2 10/1000usec. Waveform as Defined by R.E.A. 10000 50 1000 Measured at Stand off Voltage,V WM 0 0 td 1.0 2.0 t, TIME,mS 3.0 4.0 100 1.0 10 100 200 V( BR ), BREAKDOWN VOLTACE, VOLTS F IG. 6 - MAXIMUM NON-REPETITIVE FORWARD S URGE CURRENT UNI-DIRECTIONAL 400 I FSM , PEAK FORWARD SURGE CURRENT AMPERES 8.3ms Single Half Sine-Wave (JEDED Method) F IG. 5 - STEADY STATE POWER DERATING CURVE 8 P M ( AV ), STEADY STATE POWER DISSIATION, WATTS 60Hz Resistive or Inductive Load L = 0.375"(9.5mm) Lead Lengths 350 300 250 200 150 100 1 6 4 1.6X1.6X0.040" (40X40X1mm) Copper Heat Sinks 2 0 0 25 50 75 100 125 150 T L , LEAD TEMPERATURE ( OC ) 175 200 10 NUMBER OF CYCLES AT 60 Hz 100