BAV70BPT

CHENMKO ENTERPRISE CO.,LTD SURFACE MOUNT FAST SWITCHING DIODE VOLTAGE RANGE 100 Volts CURRENT 150 mAmpere FEATURES * Plastic package has Underwriters Laboratory Flammability Classification 94V-0 * For surface mounted applications * Low profile package * Built-in strain relief * Low power loss, high efficiency * High current capability, low forward voltage drop * Power dissipation: 350mW * Repetitive peak forward surge current: 450mA * High temperature soldering guaranteed : 260oC/10 seconds at terminals B AV70BPT SOD-123 MECHANICAL DATA Case: JEDEC SOD-123 molded plastic Terminals: Solder plated, solderable per MIL-STD-750, Method 2026 Polarity: Color band denotes cathode end Weight: 0.001 ounce 0.032 gram 0.028(0.70) 0.018(0.45) 1 0.153(3.90) 0.140(3.55) 0.112(2.85) 0.098(2.50) 2 0.071(1.80) 0.055(1.40) 0.053(1.35) 0.035(0.90) MARKING * S1 MAX. 0.008(0.2) 0.02(0.5) Tpy 0.004(0.12) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25oC ambient temperature unless otherwise specified. Single phase, half wave, 60 HZ, resistive or inductive load. For capacitive load, derate current by 20%. Dimensions in inches and (millimeters) SOD-123 MAXIMUM RATINGES ( At TA = 25oC unless otherwise noted ) RATINGS Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current at TL = 100oC Non-Repetitive Peak Forward Surge Current Typic Junction Capacitance (Note 2) Maximum Reverse Recovery Time (Note 3) Typical Thermal Resistance (Note 1) Storage and Operating Temperature Range o SYMBOL VRRM VRMS VDC IO IFSM CJ TRR R JA BAV70BPT 100 53 75 150 2.0 1.0 2.0 4.0 357 -65 to +150 UNITS Volts Volts Volts mAmps Amps pF nS o @ t=1.0uS @ t=1.0S C/W o TJ, TSTG C ELECTRICAL CHARACTERISTICS ( At TA = 25 C unless otherwise noted ) CHARACTERISTICS Maximum Instantaneous Forward Voltage @ @ @ @ @ @ @ @ SYMBOL IF = 1.0 mA IF = 10 mA IF = 50 mA IF = 150 mA VR = 20 V VR = 25 V, TJ=150OC VR = 75 V VR = 75 V, TJ=150OC VF BAV70BPT 0.715 0.855 1.00 1.25 25 30 2.5 50 UNITS Volts Volts nAmps uAmps uAmps uAmps 2002-9 Maximum Average Reverse Current at Ratied DC Blocking Voltage IR NOTES : 1. Thermal Resistance ( Junction to Lead ) : PC Board Mounted on 0.06 X 0.06" ( 0.15X 0.15mm ) copper pad area. 2. Measured at 1.0 MHZ and applied reverse voltage of 0 volt. 3. IF=IR=10 mA, IRR=0.1XIR, RL=100 ohms RATING CHARACTERISTIC CURVES ( BAV70BPT ) FIG. 1 - TYPICAL FORWARD CURRENT DERAING CURVE 500 FORWARD CURRENT, (mA) 200 100 50 20 10 5 2 1 0 25 50 75 100 o FIG. 2 - FORWARD CHARACTERISTICS AVERAGE FORWARD CURRENT, (%) 125 100 75 50 25 0 Ta=85oC 50oC 25oC 0oC o - 30 C 125 150 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 AMBIENT TEMPERATURE, ( C) FORWARD VOLTAGE, (V) FIG. 3 - TYPICAL JUNCTION CAPACITANCE 100u REVERSE CURRENT, (nA) FIG. 4 - REVERSE CHARACTERISTICS JUNCTION CAPACITANCE, (pF) f=1MHz 2 Ta=150oC 10u 100oC 1u 0.1u 75oC 1 25oC 10 1 0 0 2 4 6 8 10 12 14 16 18 20 REVERSE VOLTAGE, (V) 0 25 50 REVERSE VOLTAGE, (V) 75 100